March 2014 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun Mar 2 22:45:16 EST 2014
Ending: Mon Mar 31 11:14:59 EDT 2014
Messages: 320

• nand pmecc crash detected   Josh Wu
  • nand pmecc crash detected   Sascha Hauer
  • nand pmecc crash detected   Jean-Christophe PLAGNIOL-VILLARD
  • nand pmecc crash detected   Herve Codina
• [PATCH 1/1 v2] ARM: i.MX31: Add support for mx31moboard board   Sascha Hauer
  • [PATCH 1/1 v2] ARM: i.MX31: Add support for mx31moboard board   Sascha Hauer
• [PATCH 1/1] blspec: Fix when NFS is not enabled   Sascha Hauer
• [PATCH] mtd: nand: disable subpage reads   Sascha Hauer
  • [PATCH] mtd: nand: disable subpage reads   Hattink, Tjalling [FINT]
• [PATCH v2 0/4] ppc: memory layout and memtest   Sascha Hauer
• [RFC 3/3] libbb: read_full: use read return instead size   Sascha Hauer
  • [RFC 3/3] libbb: read_full: use read return instead size   Alexander Aring
• [RFC 1/3] ramfs: add foofs for testing   Sascha Hauer
  • [RFC 1/3] ramfs: add foofs for testing   Alexander Aring
• [U-Boot] [PATCH V2] hush: fix some quoted variable expansion issues   Tom Rini
• [PATCH 3/5] net: remove old nfs support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 3/5] net: remove old nfs support   Sascha Hauer
    • [PATCH 3/5] net: remove old nfs support   Jean-Christophe PLAGNIOL-VILLARD
• at91sam9260-ek ...   Vanhauwaert Wouter
  • at91sam9260-ek ...   Vanhauwaert Wouter
  • at91sam9260-ek ...   Sascha Hauer
    • at91sam9260-ek ...   Vanhauwaert Wouter
      • at91sam9260-ek ...   Sascha Hauer
      • at91sam9260-ek ...   Vanhauwaert Wouter
      • at91sam9260-ek ...   Vanhauwaert Wouter
      • Re: at91sam9260-ek ...   Alexander Shiyan
• [PATCH] Makefile: add target for gtags   Steffen Trumtrar
  • [PATCH] Makefile: add target for gtags   Baruch Siach
    • [PATCH] Makefile: add target for gtags   Steffen Trumtrar
• [PATCH v2] Makefile: add target for gtags   Steffen Trumtrar
• v2014.03.0   Sascha Hauer
• [PATCH v2 1/7] sata-imx: i.MX53, use the internal 120MHz clock by default   Eric Bénard
  • [PATCH v2 2/7] ARM: i.MX53: Add sata to devicetree   Eric Bénard
    • [PATCH v2 2/7] ARM: i.MX53: Add sata to devicetree   Sascha Hauer
  • [PATCH v2 3/7] ARM: mx53-qsrb: fix USB   Eric Bénard
  • [PATCH v2 4/7] ARM: mx53-qsrb: enable USB host   Eric Bénard
  • [PATCH v2 5/7] ARM: mx53-qsrb: enable USB OTG in host mode   Eric Bénard
  • [PATCH v2 6/7] ARM: mx53-qsrb: enable sata   Eric Bénard
  • [PATCH v2 7/7] ARM: mx53-qsb: update defconfig   Eric Bénard
  • [PATCH v2 1/7] sata-imx: i.MX53, use the internal 120MHz clock by default   Sascha Hauer
    • [PATCH v2 1/7] sata-imx: i.MX53, use the internal 120MHz clock by default   Eric Bénard
      • [PATCH v2 1/7] sata-imx: i.MX53, use the internal 120MHz clock by default   Sascha Hauer
• [PATCH 1/5] mtd: Update internal API to support 64-bit device size   Dmitry Lavnikevich
  • [PATCH 1/5] mtd: Update internal API to support 64-bit device size   Sascha Hauer
    • [PATCH 1/5] mtd: Update internal API to support 64-bit device size   Alexander Aring
      • [PATCH 1/5] mtd: Update internal API to support 64-bit device size   Sascha Hauer
      • [PATCH 1/5] mtd: Update internal API to support 64-bit device size   Alexander Aring
      • [PATCH 1/5] mtd: Update internal API to support 64-bit device size   Sascha Hauer
    • [PATCH 1/5] mtd: Update internal API to support 64-bit device size   Dmitry Lavnikevich
  • [PATCH 1/5] mtd: Update internal API to support 64-bit device size   Dmitry Lavnikevich
    • [PATCH 1/5] mtd: Update internal API to support 64-bit device size   Sascha Hauer
      • [PATCH 1/5] mtd: Update internal API to support 64-bit device size   Alexander Aring
      • [PATCH 1/5] mtd: Update internal API to support 64-bit device size   Sascha Hauer
• [PATCH 2/5] mtd: Support for 4GB partitions   Dmitry Lavnikevich
  • [PATCH 2/5] mtd: Support for 4GB partitions   Dmitry Lavnikevich
• [PATCH 3/5] ubi: Fix for creating ubi volumes with 64bit size   Dmitry Lavnikevich
  • [PATCH 3/5] ubi: Fix for creating ubi volumes with 64bit size   Dmitry Lavnikevich
• [PATCH 4/5] nand: mxs: Check for up to 4 NAND chips   Dmitry Lavnikevich
  • [PATCH 4/5] nand: mxs: Check for up to 4 NAND chips   Dmitry Lavnikevich
• [PATCH 5/5] nand: mxs: Fix for calculating ecc strength on some types of NAND flash   Dmitry Lavnikevich
  • [PATCH 5/5] nand: mxs: Fix for calculating ecc strength on some types of NAND flash   Dmitry Lavnikevich
• [PATCH 1/1] ARM: mx31moboard: Fix UPLL and SPLL initialisation   Philippe Rétornaz
• [PATCH 1/7] ARM: socfgpa: Remove redundant assignment   Alexander Shiyan
• [PATCH] treewide: Kill empty remove() implementations   Alexander Shiyan
• [PATCH 0/8] ARM: initial support for TI DaVinci SoCs and virt2real board   Antony Pavlov
  • [PATCH 1/8] clocksource: add dummy software-only clocksource   Antony Pavlov
    • [PATCH 1/8] clocksource: add dummy software-only clocksource   Sascha Hauer
      • [PATCH 1/8] clocksource: add dummy software-only clocksource   Antony Pavlov
      • [PATCH 1/8] clocksource: add dummy software-only clocksource   Sascha Hauer
  • [PATCH 2/8] import _AC and UL macros from linux kernel   Antony Pavlov
  • [PATCH 3/8] ARM: initial support for TI DaVinci SoCs   Antony Pavlov
  • [PATCH 4/8] ARM: davinci: add DEBUG_LL support   Antony Pavlov
  • [PATCH 5/8] ARM: davinci: add documentation   Antony Pavlov
  • [PATCH 6/8] ARM: davinci: add virt2real board support   Antony Pavlov
  • [PATCH 7/8] ARM: virt2real: add documentation   Antony Pavlov
  • [PATCH 8/8] ARM: davinci: add virt2real_defconfig   Antony Pavlov
• [PATCH] ppc: P2020RDB: add persistent configuration support   Renaud Barbier
  • [PATCH] ppc: P2020RDB: add persistent configuration support   Renaud Barbier
• [PATCH] i.MX6: bbu: Barebox update support for NAND.   Dmitry Lavnikevich
  • [PATCH] i.MX6: bbu: Barebox update support for NAND.   Sascha Hauer
    • [PATCH] i.MX6: bbu: Barebox update support for NAND.   Dmitry Lavnikevich
    • [PATCH] i.MX6: bbu: Barebox update support for NAND.   Dmitry Lavnikevich
      • [PATCH] i.MX6: bbu: Barebox update support for NAND.   Sascha Hauer
    • [PATCH] i.MX6: bbu: Barebox update support for NAND.   Sascha Hauer
• [PATCH] ARM: socfpga: socrates: fix ENTRY_FUNCTION   Steffen Trumtrar
  • [PATCH] ARM: socfpga: socrates: fix ENTRY_FUNCTION   Sascha Hauer
• [PATCH] ARM: i.MX25: freescale-mx25-3stack: Remove USBH2 pin setting   Fabio Estevam
• Porting barebox to Novena: misc questions   Sean Cross
  • Porting barebox to Novena: misc questions   Sascha Hauer
    • Porting barebox to Novena: misc questions   Sean Cross
      • Porting barebox to Novena: misc questions   Sascha Hauer
      • Porting barebox to Novena: misc questions   Sean Cross
      • Porting barebox to Novena: misc questions   Sascha Hauer
      • Porting barebox to Novena: misc questions   Sean Cross
      • Porting barebox to Novena: misc questions   Sascha Hauer
      • Porting barebox to Novena: misc questions   Alexander Aring
      • Porting barebox to Novena: misc questions   Sean Cross
      • Porting barebox to Novena: misc questions   Sascha Hauer
      • Porting barebox to Novena: misc questions   Sean Cross
      • Porting barebox to Novena: misc questions   Sascha Hauer
      • Porting barebox to Novena: misc questions   Sean Cross
      • Porting barebox to Novena: misc questions   Sascha Hauer
      • Porting barebox to Novena: misc questions   Sean Cross
    • Porting barebox to Novena: misc questions   Jean-Christophe PLAGNIOL-VILLARD
      • Porting barebox to Novena: misc questions   Sascha Hauer
      • Porting barebox to Novena: misc questions   Jean-Christophe PLAGNIOL-VILLARD
  • Porting barebox to Novena: misc questions   Eric Bénard
    • Porting barebox to Novena: misc questions   Sascha Hauer
      • Porting barebox to Novena: misc questions   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/6] ppc: add Freescale P1022DS board support   Renaud Barbier
  • [PATCH 1/6] ppc: add SoC support for Freescale P1022   Renaud Barbier
  • [PATCH 2/6] common: DDR3 SPD verification support   Renaud Barbier
  • [PATCH 3/6] ppc: mpc8xxx: add DDR3 support   Renaud Barbier
  • [PATCH 4/6] ppc: add Freescale P1022DS board support   Renaud Barbier
  • [PATCH 5/7] ppc: mpc85xx: add stashing support   Renaud Barbier
  • [PATCH 5/6] ppc: mpc85xx:gianfar: add stashing support   Renaud Barbier
  • [PATCH 6/6] ppc: P1022DS: update Kconfig and Makefile   Renaud Barbier
  • [PATCH 0/6] ppc: add Freescale P1022DS board support   Sascha Hauer
• problem booting with Micron MT29F8G08ABABAWP ...   raespi
  • problem booting with Micron MT29F8G08ABABAWP ...   Eric Bénard
    • problem booting with Micron MT29F8G08ABABAWP ...   raespi
      • problem booting with Micron MT29F8G08ABABAWP ...   Eric Bénard
      • problem booting with Micron MT29F8G08ABABAWP ...   raespi
      • problem booting with Micron MT29F8G08ABABAWP ...   Sascha Hauer
• i.MX21 ADS NAND flash bad blocks scan. Barebox vs Linux   Cristiano De Alti
  • i.MX21 ADS NAND flash bad blocks scan. Barebox vs Linux   Sascha Hauer
    • i.MX21 ADS NAND flash bad blocks scan. Barebox vs Linux   Cristiano De Alti
  • i.MX21 ADS NAND flash bad blocks scan. Barebox vs Linux   Alexander Aring
    • i.MX21 ADS NAND flash bad blocks scan. Barebox vs Linux   Cristiano De Alti
      • i.MX21 ADS NAND flash bad blocks scan. Barebox vs Linux   Alexander Aring
  • i.MX21 ADS NAND flash bad blocks scan. Barebox vs Linux   Cristiano De Alti
• [PATCH] ARM: MMU: Add some debugging aids and hints   Sascha Hauer
• [PATCH] ifup: set serverip to provided value when doing dhcp   Sascha Hauer
• [PATCH] splash: Print error message when no renderer is found   Sascha Hauer
  • [SPAM] [PATCH] splash: Print error message when no renderer is found   Jean-Christophe PLAGNIOL-VILLARD
    • [SPAM] [PATCH] splash: Print error message when no renderer is found   Sascha Hauer
• Phytec phyFLEX i.MX6 patches   Sascha Hauer
  • [PATCH 3/6] ARM: pfla02: add 4GB version   Sascha Hauer
  • [PATCH 4/6] ARM: pfla02: Set ODT to recommended setting   Sascha Hauer
    • [PATCH 4/6] ARM: pfla02: Set ODT to recommended setting   Christian Hemp
      • [PATCH 4/6] ARM: pfla02: Set ODT to recommended setting   Sascha Hauer
  • [PATCH 5/6] ARM: pfla02: Add support for DualLite and Solo core   Sascha Hauer
  • [PATCH 6/6] ARM: pfla02: Set new ethernet phy tx timings   Sascha Hauer
    • [PATCH 6/6] ARM: pfla02: Set new ethernet phy tx timings   Alexander Aring
      • [PATCH 6/6] ARM: pfla02: Set new ethernet phy tx timings   Sascha Hauer
      • [PATCH 6/6] ARM: pfla02: Set new ethernet phy tx timings   Alexander Aring
• [PATCH 1/6] ARM: i.MX6Q: Fix IOMUXC GPR1 bit 21 (ENET_CLK_SEL)   Sascha Hauer
• [PATCH 2/6] ARM: pfla02: Drop unnecessary compilation of flash headers   Sascha Hauer
• i.MX IPUv3 support   Sascha Hauer
  • [PATCH 02/29] ARM: i.MX6: Add initial variscite VAR-SOM-MX6 CPU support   Sascha Hauer
  • [PATCH 12/29] clk: clk-divider: pass flags to initializers   Sascha Hauer
  • [PATCH 13/29] clk: introduce CLK_SET_RATE_PARENT flag   Sascha Hauer
    • Re: [PATCH 13/29] clk: introduce CLK_SET_RATE_PARENT flag   Alexander Shiyan
      • [PATCH 13/29] clk: introduce CLK_SET_RATE_PARENT flag   Sascha Hauer
  • [PATCH 14/29] clk: clk-divider: sync with kernel code   Sascha Hauer
  • [PATCH 15/29] clk: let clk-divider handle the table based divider aswell   Sascha Hauer
  • [PATCH 17/29] clk: Add parent round/set rate for mux and gate   Sascha Hauer
  • [PATCH 18/29] ARM: i.MX: introduce clk parent rate changes   Sascha Hauer
  • [PATCH 21/29] video: rework mode_name parameter setting   Sascha Hauer
  • [PATCH 22/29] video: Add display timing from devicetree helper   Sascha Hauer
  • [PATCH 23/29] video: Add edid support   Sascha Hauer
  • [PATCH 24/29] ARM i.MX6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority   Sascha Hauer
  • [PATCH 27/29] video: i.MX IPUv3: Add lvds bridge support   Sascha Hauer
  • [PATCH 28/29] video: i.MX IPUv3: Add hdmi support   Sascha Hauer
• [PATCH 01/29] err.h: Add PTR_ERR_OR_ZERO from kernel   Sascha Hauer
• [PATCH 03/29] ARM: dts: i.MX6: Add IPU aliases   Sascha Hauer
• [PATCH 04/29] ARM: dts: i.MX6: Add HDMI nodes   Sascha Hauer
• [PATCH 05/29] ARM: dts: i.MX53: Fix IPU register size   Sascha Hauer
• [PATCH 06/29] i2c: i.MX: move to earlier initcall   Sascha Hauer
• [PATCH 07/29] i2c: implement of_find_i2c_adapter_by_node   Sascha Hauer
• [PATCH 08/29] clk: implement clk_round_rate   Sascha Hauer
• [PATCH 09/29] clk: clk-mux: pass clk flags from initializers   Sascha Hauer
• [PATCH 10/29] clk: clk-gate: pass flags to initializers   Sascha Hauer
• [PATCH 11/29] clk: clk-fixed-factor: pass flags to initializers   Sascha Hauer
• [PATCH 16/29] clk: clk-fixed-factor: add set_rate/round_rate callbacks   Sascha Hauer
• [PATCH 19/29] ARM: i.MX6: Add video clocks   Sascha Hauer
• [PATCH 20/29] video: introduce struct display_timings   Sascha Hauer
• [PATCH 25/29] video: Add kernel fourcc defines   Sascha Hauer
• [PATCH 29/29] ARM: update imx_v7_defconfig   Sascha Hauer
• Barebox x86 IDE support   Stam, Michel [FINT]
  • Barebox x86 IDE support   Stam, Michel [FINT]
    • Barebox x86 IDE support   Sascha Hauer
      • Barebox x86 IDE support   Michel Stam
• [PATCH] mci: core: Typo fix in printk specifier   Alexander Shiyan
  • [PATCH] mci: core: Typo fix in printk specifier   Sascha Hauer
• [PATCH] ARM: i.MX27: dts: Separate barebox-specific DT changes   Alexander Shiyan
  • [PATCH] ARM: i.MX27: dts: Separate barebox-specific DT changes   Sascha Hauer
• [PATCH v2 00/10] ARM: initial support for TI DaVinci SoCs and virt2real board   Antony Pavlov
  • [PATCH v2 02/10] ARM: initial support for TI DaVinci SoCs   Antony Pavlov
  • [PATCH v2 03/10] ARM: davinci: add DEBUG_LL support   Antony Pavlov
  • [PATCH v2 04/10] ARM: davinci: add clocksource   Antony Pavlov
  • [PATCH v2 05/10] gpio: add driver for TI DaVinci SoCs   Antony Pavlov
  • [PATCH v2 06/10] ARM: dts: Add TI TMS320DM365 devicetree file   Antony Pavlov
    • [PATCH v2 06/10] ARM: dts: Add TI TMS320DM365 devicetree file   Sascha Hauer
  • [PATCH v2 07/10] ARM: davinci: add documentation   Antony Pavlov
  • [PATCH v2 08/10] ARM: davinci: add virt2real board support   Antony Pavlov
    • [PATCH v2 08/10] ARM: davinci: add virt2real board support   Sascha Hauer
  • [PATCH v2 09/10] ARM: virt2real: add documentation   Antony Pavlov
  • [PATCH v2 10/10] ARM: davinci: add virt2real_defconfig   Antony Pavlov
• [PATCH v2 01/10] import _AC and UL macros from linux kernel   Antony Pavlov
• GPIO setting   Ivor Kruger
  • GPIO setting   Sascha Hauer
    • GPIO setting   Ivor Kruger
      • GPIO setting   Sascha Hauer
    • GPIO setting   Ivor Kruger
      • GPIO setting   Ivor Kruger
• [PATCH v2] clocksource: add dummy software-only clocksource   Antony Pavlov
  • [PATCH v2] clocksource: add dummy software-only clocksource   Sascha Hauer
• [PATCH] ARM: MMU: Fix memory reaching to the end of address space   Sascha Hauer
• [PATCH] arm: imx53: qsb: set hostname from board file   Lucas Stach
  • [PATCH] arm: imx53: qsb: set hostname from board file   Sascha Hauer
• [PATCH] [FOR SQUASH] ARM: virt2real.dts: use labels without whitespaces   Antony Pavlov
  • [PATCH] [FOR SQUASH] ARM: virt2real.dts: use labels without whitespaces   Sascha Hauer
• [PATCH] [FOR SQUASH] clocksource: dummy.c: remove Kconfig warning   Antony Pavlov
  • [PATCH] [FOR SQUASH] clocksource: dummy.c: remove Kconfig warning   Sascha Hauer
    • [PATCH] [FOR SQUASH] clocksource: dummy.c: remove Kconfig warning   Antony Pavlov
• [PATCH] mtd: ubi: avoid NULL pointer dereference in ubi_get_device   Philipp Zabel
  • [PATCH] mtd: ubi: avoid NULL pointer dereference in ubi_get_device   Sascha Hauer
• [PATCH 1/2] usb: gadget: set composite to NULL when usb_gadget_register_driver fails   Sascha Hauer
  • [PATCH 2/2] usb: gadget: propagate error code from usb_composite_register   Sascha Hauer
• [PATCH 1/2] boot command: honour global.boot.default also for -l and -m   Sascha Hauer
• [PATCH 2/2] boot command: only create boot entries from scripts   Sascha Hauer
• [PATCH] ARM i.MX6Q: Fix IOMUXC GPR1 defines for ENET_CLK_SEL and IPU1/2_MUX   Sascha Hauer
• [PATCH] blspec: Check if an entry is compatible with the current machine   Sascha Hauer
• [PATCH RESEND] drivers: treewide: Kill empty remove() implementations   Alexander Shiyan
• [PATCH 0/7] MIPS: improve Ingenic JZ4755 device tree support   Antony Pavlov
  • [PATCH 1/7] MIPS: mach-xburst: fix DEBUG_LL=n build error   Antony Pavlov
  • [PATCH 2/7] MIPS: dts: rzx50: move jz4755 description to the separate file   Antony Pavlov
  • [PATCH 3/7] serial: ns16550: make it possible to get reg_write() from devtype   Antony Pavlov
  • [PATCH 4/7] serial: ns16550: add compatible entry for "ingenic, jz4740-uart"   Antony Pavlov
    • [PATCH 4/7] serial: ns16550: add compatible entry for "ingenic, jz4740-uart"   Sascha Hauer
      • [PATCH 4/7] serial: ns16550: add compatible entry for "ingenic, jz4740-uart"   Antony Pavlov
  • [PATCH 5/7] MIPS: rzx50: drop console initialization in board code   Antony Pavlov
  • [PATCH 6/7] MIPS: mach-xburst: drop serial.c   Antony Pavlov
  • [PATCH 7/7] MIPS: boards: rename rzx50 -> ritmix-rzx50   Antony Pavlov
• [PATCH] OMAP4_USBboot: Change output text formatting   Vicente Bergas
  • [PATCH] OMAP4_USBboot: Change output text formatting   Sascha Hauer
• [PATCH v2 0/8] MIPS: improve Ingenic JZ4755 device tree support   Antony Pavlov
  • [PATCH v2 1/8] MIPS: mach-xburst: fix DEBUG_LL=n build error   Antony Pavlov
  • [PATCH v2 2/8] MIPS: dts: rzx50: move jz4755 description to the separate file   Antony Pavlov
  • [PATCH v2 3/8] serial: ns16550: fix whitespaces   Antony Pavlov
  • [PATCH v2 4/8] serial: ns16550: make FCR setup value part of struct ns16550_priv   Antony Pavlov
    • [PATCH v2 4/8] serial: ns16550: make FCR setup value part of struct ns16550_priv   Antony Pavlov
  • [PATCH v2 5/8] serial: ns16550: add compatible entry for "ingenic, jz4740-uart"   Antony Pavlov
  • [PATCH v2 6/8] MIPS: rzx50: drop console initialization in board code   Antony Pavlov
  • [PATCH v2 7/8] MIPS: mach-xburst: drop serial.c   Antony Pavlov
  • [PATCH v2 8/8] MIPS: boards: rename rzx50 -> ritmix-rzx50   Antony Pavlov
  • [PATCH v2 0/8] MIPS: improve Ingenic JZ4755 device tree support   Antony Pavlov
• [PATCH 1/3] common: driver: Allow for I/O mapped I/O in resource requests   Michel Stam
  • [PATCH 1/3] common: driver: Allow for I/O mapped I/O in resource requests   Sascha Hauer
• [PATCH 2/3] x86: Add support for IDE on the legacy I/O ports   Michel Stam
• [PATCH 3/3] x86: Most systems support a second serial port. Add it.   Michel Stam
• [PATCH v3 0/8] MIPS: improve Ingenic JZ4755 device tree support   Antony Pavlov
  • [PATCH v3 1/8] MIPS: dts: rzx50: move jz4755 description to the separate file   Antony Pavlov
  • [PATCH v3 2/8] serial: ns16550: fix whitespaces   Antony Pavlov
  • [PATCH v3 3/8] serial: ns16550: make FCR setup value part of struct ns16550_priv   Antony Pavlov
  • [PATCH v3 4/8] serial: ns16550: add compatible entry for "ns16450"   Antony Pavlov
  • [PATCH v3 5/8] serial: ns16550: add compatible entry for "ingenic, jz4740-uart"   Antony Pavlov
  • [PATCH v3 6/8] MIPS: rzx50: drop console initialization in board code   Antony Pavlov
  • [PATCH v3 7/8] MIPS: mach-xburst: drop serial.c   Antony Pavlov
  • [PATCH v3 8/8] MIPS: boards: rename rzx50 -> ritmix-rzx50   Antony Pavlov
  • [PATCH v3 0/8] MIPS: improve Ingenic JZ4755 device tree support   Sascha Hauer
• Can i access the barebox env from linux   Ashutosh Singh
  • Can i access the barebox env from linux   Sascha Hauer
    • Can i access the barebox env from linux   Alexander Aring
      • Can i access the barebox env from linux   Ashutosh Singh
      • Can i access the barebox env from linux   Alexander Aring
      • Can i access the barebox env from linux   Alexander Aring
      • Can i access the barebox env from linux   Michel Stam
      • Can i access the barebox env from linux   Alexander Aring
      • Can i access the barebox env from linux   Michel Stam
      • Can i access the barebox env from linux   Alexander Aring
• on duplicating device tree clk constants   Antony Pavlov
  • on duplicating device tree clk constants   Lucas Stach
• [PATCH] MIPS: mach-xburst: fix DEBUG_LL=n build error   Antony Pavlov
  • [PATCH] MIPS: mach-xburst: fix DEBUG_LL=n build error   Antony Pavlov
  • [PATCH] MIPS: mach-xburst: fix DEBUG_LL=n build error   Sascha Hauer
• [PATCH] MIPS: lib: add BAREBOX_CLK_TABLE to linker script   Antony Pavlov
  • [PATCH] MIPS: lib: add BAREBOX_CLK_TABLE to linker script   Antony Pavlov
    • [PATCH] MIPS: lib: add BAREBOX_CLK_TABLE to linker script   Sascha Hauer
• [PATCH 1/3] RiOTboard: add new board   Eric Bénard
• [PATCH 2/3] MarSBoard: add new board   Eric Bénard
  • [PATCH 2/3] MarSBoard: add new board   Sascha Hauer
• [PATCH 3/3] arm: add defconfig for Embest boards   Eric Bénard
  • [PATCH 3/3] arm: add defconfig for Embest boards   Lucas Stach
    • [PATCH 3/3] arm: add defconfig for Embest boards   Eric Bénard
• [PATCH 0/9] MIPS: add Atheros AR933x SoC & TP-LINK MR3020 board support   Antony Pavlov
  • [PATCH 2/9] MIPS: add Atheros ar933x family support   Antony Pavlov
  • [PATCH 3/9] MIPS: ath79: add DEBUG_LL support for Atheros AR933x   Antony Pavlov
  • [PATCH 4/9] serial: add Atheros AR933x driver   Antony Pavlov
  • [PATCH 5/9] clk: add Atheros AR933x driver   Antony Pavlov
  • [PATCH 6/9] MIPS: ath79: ar9331: add devicetree files   Antony Pavlov
  • [PATCH 7/9] MIPS: ath79: add tplink-mr3020 board support   Antony Pavlov
    • [PATCH 7/9] MIPS: ath79: add tplink-mr3020 board support   Sascha Hauer
  • [PATCH 8/9] MIPS: tplink-mr3020: add documentation   Antony Pavlov
  • [PATCH 9/9] MIPS: add tplink-mr3020_defconfig   Antony Pavlov
  • [PATCH 0/9] MIPS: add Atheros AR933x SoC & TP-LINK MR3020 board support   Antony Pavlov
    • [PATCH 0/9] MIPS: add Atheros AR933x SoC & TP-LINK MR3020 board support   Sascha Hauer
      • [PATCH 0/9] MIPS: add Atheros AR933x SoC & TP-LINK MR3020 board support   Antony Pavlov
• [PATCH 1/9] MIPS: lib: add BAREBOX_CLK_TABLE to linker script   Antony Pavlov
• Add support for creating menus from a directory structure   Sascha Hauer
  • [PATCH 1/3] Add shell_expand function   Sascha Hauer
  • [PATCH 2/3] add menutree command   Sascha Hauer
  • [PATCH 3/3] defenv-2: replace menu with menutree   Sascha Hauer
• [PATCH] ARM: at91: add sama5d36 SoC support   Bo Shen
  • [PATCH] ARM: at91: add sama5d36 SoC support   Sascha Hauer
• tegra: clk_fixed_factor   Antony Pavlov
  • tegra: clk_fixed_factor   Sascha Hauer
• [PATCH] MIPS: rzx50: use short form for serial1 reference   Antony Pavlov
  • [PATCH] MIPS: rzx50: use short form for serial1 reference   Sascha Hauer
• [PATCH] of: Add support for "stdout-path" property   Sascha Hauer
• [PATCH] netconsole: bail out when no connection is opened   Sascha Hauer
• [PATCH 1/2] ARM: socfpga: move iocsr from mach to sockit board folder   Steffen Trumtrar
  • [PATCH 2/2] ARM: socfpga: socrates: add iocsr config   Steffen Trumtrar
• [PATCH 1/2] ARM: i.MX6: Add Nand boot bbu handler   Sascha Hauer
• [PATCH 2/2] ARM: i.MX6 Phytec phyFLEX: Add Nand update support   Sascha Hauer
• Building and booting Barebox on Pandaboard   Nur Hussein
  • Building and booting Barebox on Pandaboard   Sascha Hauer
    • Building and booting Barebox on Pandaboard   Nur Hussein
• [PATCH] ARM: Panda: Fix board selection in panda defconfig files   Sascha Hauer

Last message date: Mon Mar 31 11:14:59 EDT 2014
Archived on: Mon Mar 31 11:15:31 EDT 2014

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...