[PATCH v2 6/7] ARM: mx53-qsrb: enable sata

[Eric Bénard]

tested on i.MX53 START-R :
barebox at Freescale i.MX53 Quick Start-R Board:/ ata0.probe=1
imx-sata 10000000.sata: port 0: SATA link ok
imx-sata 10000000.sata: port 0: Spinning up device...
imx-sata 10000000.sata: port 0: ok.
ata0: registered /dev/ata0

Signed-off-by: Eric Bénard <eric at eukrea.com>
---
 arch/arm/dts/imx53-qsb-common.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/dts/imx53-qsb-common.dtsi b/arch/arm/dts/imx53-qsb-common.dtsi
index 3a9d55e..571da92 100644
--- a/arch/arm/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/dts/imx53-qsb-common.dtsi
@@ -227,3 +227,6 @@
 	status = "okay";
 };
 
+&sata {
+	status = "okay";
+};
-- 
1.8.3.1