[PATCH v2 7/7] ARM: mx53-qsb: update defconfig

Eric Bénard eric at eukrea.com
Fri Mar 7 05:40:03 EST 2014


- enable more commands :
    (menu, password, loadb, let, mm, sha*, bootz, of*, memtest)
- enable led and led triggers
- enable sata support
- enable USB chipidea support
- enable USB network drivers
- enable NFS and DNS support
- enable EXT4 support

Signed-off-by: Eric Bénard <eric at eukrea.com>
---
 arch/arm/configs/freescale-mx53-qsb_defconfig | 31 +++++++++++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)

diff --git a/arch/arm/configs/freescale-mx53-qsb_defconfig b/arch/arm/configs/freescale-mx53-qsb_defconfig
index afe8b72..8365234 100644
--- a/arch/arm/configs/freescale-mx53-qsb_defconfig
+++ b/arch/arm/configs/freescale-mx53-qsb_defconfig
@@ -16,6 +16,7 @@ CONFIG_HUSH_FANCY_PROMPT=y
 CONFIG_CMDLINE_EDITING=y
 CONFIG_AUTO_COMPLETE=y
 CONFIG_MENU=y
+CONFIG_BLSPEC=y
 CONFIG_CONSOLE_ACTIVATE_NONE=y
 CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
 CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/freescale-mx53-qsb/env/"
@@ -25,31 +26,44 @@ CONFIG_CMD_EDIT=y
 CONFIG_CMD_SLEEP=y
 CONFIG_CMD_MSLEEP=y
 CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_LOADENV=y
 CONFIG_CMD_EXPORT=y
 CONFIG_CMD_PRINTENV=y
 CONFIG_CMD_READLINE=y
+CONFIG_CMD_LET=y
 CONFIG_CMD_MENU=y
 CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_PASSWD=y
+CONFIG_PASSWD_MODE_STAR=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_LN=y
 CONFIG_CMD_TFTP=y
 CONFIG_CMD_FILETYPE=y
 CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_LOADB=y
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_IOMEM=y
+CONFIG_CMD_MM=y
 CONFIG_CMD_CRC=y
 CONFIG_CMD_CRC_CMP=y
 CONFIG_CMD_MD5SUM=y
+CONFIG_CMD_SHA1SUM=y
+CONFIG_CMD_SHA256SUM=y
+CONFIG_CMD_SHA224SUM=y
 CONFIG_CMD_BOOTM_SHOW_TYPE=y
 CONFIG_CMD_BOOTM_VERBOSE=y
 CONFIG_CMD_BOOTM_INITRD=y
 CONFIG_CMD_BOOTM_OFTREE=y
 CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
+CONFIG_CMD_BOOTM_AIMAGE=y
 CONFIG_CMD_UIMAGE=y
-# CONFIG_CMD_BOOTU is not set
+CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_RESET=y
 CONFIG_CMD_GO=y
 CONFIG_CMD_OFTREE=y
+CONFIG_CMD_OF_PROPERTY=y
+CONFIG_CMD_OF_NODE=y
+CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_BAREBOX_UPDATE=y
 CONFIG_CMD_TIMEOUT=y
 CONFIG_CMD_PARTITION=y
@@ -64,23 +78,36 @@ CONFIG_CMD_DETECT=y
 CONFIG_CMD_WD=y
 CONFIG_NET=y
 CONFIG_NET_DHCP=y
+CONFIG_NET_NFS=y
 CONFIG_NET_PING=y
 CONFIG_NET_NETCONSOLE=y
+CONFIG_NET_RESOLV=y
 CONFIG_OFDEVICE=y
 CONFIG_SMSC_PHY=y
 CONFIG_DRIVER_NET_FEC_IMX=y
+CONFIG_NET_USB=y
+CONFIG_NET_USB_ASIX=y
+CONFIG_NET_USB_SMSC95XX=y
 # CONFIG_SPI is not set
 CONFIG_I2C=y
 CONFIG_I2C_IMX=y
-CONFIG_DISK_ATA=y
+CONFIG_DISK_AHCI=y
+CONFIG_DISK_AHCI_IMX=y
 CONFIG_USB=y
+CONFIG_USB_IMX_CHIPIDEA=y
 CONFIG_USB_EHCI=y
+CONFIG_USB_ULPI=y
 CONFIG_USB_STORAGE=y
 CONFIG_MCI=y
 CONFIG_MCI_IMX_ESDHC=y
 CONFIG_MFD_MC13XXX=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_LED_GPIO_OF=y
+CONFIG_LED_TRIGGERS=y
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_IMX=y
+CONFIG_FS_EXT4=y
 CONFIG_FS_TFTP=y
 CONFIG_FS_NFS=y
 CONFIG_FS_FAT=y
-- 
1.8.3.1




More information about the barebox mailing list