Re: at91sam9260-ek ...

[Alexander Shiyan]

Четверг,  6 марта 2014, 13:20 +01:00 от Vanhauwaert Wouter <W.Vanhauwaert at TELEVIC.com>:
> > -----Original Message-----
> > From: barebox [mailto:barebox-bounces at lists.infradead.org] On Behalf Of
> > Vanhauwaert Wouter
> > Sent: donderdag 6 maart 2014 13:04
> > To: Sascha Hauer
> > Cc: barebox at lists.infradead.org
> > Subject: RE: at91sam9260-ek ...
> > 
> > 
> > > I'd probably start at somewhere near:
> > >
> > > ecdb717 at91/boards: switch to software ecc as in linux kernel
> > >
> > > But I don't know if that version really works.
> > >
> > > (If you don't know already, you can always start barebox second stage from an
> > > already running barebox, normally you shouldn't have to reflash for each
> > > bisecting step. Something like "tftp barebox.bin /dev/ram0; go /dev/ram0"
> > > should work.)
> > >
> > 
> > I did some tests and seems that it worked ok until version release 2013.08.0,
> > from 2013.09.0 on it gives me these errors...
> > 
> 
> Between 2013.09.0 and 2013.08.0 there's much changed in the mtd driver... Also in atmel_nand.c, 2 parameters (int oob_required, int page) are added to the page operations.
> Although nothing is done with it. I don't know what's going on further. I'll just stick with 2013.08.0 for now, I think it'll just fit my needs. Maybe somebody who knows what's going on can take a look at it?

It would be great if you could find the initial point of this bug
by using git-bisect, as Sascha says.
We could help in using this tool if you have trouble.

---