at91sam9260-ek ...

[Vanhauwaert Wouter]

> -----Original Message-----
> From: barebox [mailto:barebox-bounces at lists.infradead.org] On Behalf Of
> Vanhauwaert Wouter
> Sent: donderdag 6 maart 2014 13:04
> To: Sascha Hauer
> Cc: barebox at lists.infradead.org
> Subject: RE: at91sam9260-ek ...
> 
> 
> > I'd probably start at somewhere near:
> >
> > ecdb717 at91/boards: switch to software ecc as in linux kernel
> >
> > But I don't know if that version really works.
> >
> > (If you don't know already, you can always start barebox second stage from an
> > already running barebox, normally you shouldn't have to reflash for each
> > bisecting step. Something like "tftp barebox.bin /dev/ram0; go /dev/ram0"
> > should work.)
> >
> 
> I did some tests and seems that it worked ok until version release 2013.08.0,
> from 2013.09.0 on it gives me these errors...
> 

Between 2013.09.0 and 2013.08.0 there's much changed in the mtd driver... Also in atmel_nand.c, 2 parameters (int oob_required, int page) are added to the page operations.
Although nothing is done with it. I don't know what's going on further. I'll just stick with 2013.08.0 for now, I think it'll just fit my needs. Maybe somebody who knows what's going on can take a look at it?

Grtz,
Wouter