at91sam9260-ek ...

[Vanhauwaert Wouter]

> -----Original Message-----
> From: Sascha Hauer [mailto:s.hauer at pengutronix.de]
> Sent: donderdag 6 maart 2014 11:18
> To: Vanhauwaert Wouter
> Cc: barebox at lists.infradead.org
> Subject: Re: at91sam9260-ek ...
> 
> On Thu, Mar 06, 2014 at 11:04:28AM +0100, Vanhauwaert Wouter wrote:
> > > -----Original Message-----
> > > From: Sascha Hauer [mailto:s.hauer at pengutronix.de]
> > > Sent: donderdag 6 maart 2014 10:56
> > > To: Vanhauwaert Wouter
> > > Cc: barebox at lists.infradead.org
> > > Subject: Re: at91sam9260-ek ...
> > >
> > > On Wed, Mar 05, 2014 at 10:55:16AM +0100, Vanhauwaert Wouter wrote:
> > > > Hello,
> > > >
> > > > Is the setup for a at91sam9260-ek still functioning?
> > > > I have troubles with my nand flash. At first it boots and writes BBT-tables.
> > > > However, next boot, it won't read the BBT, and has errors with the
> > > > magic on
> > > the environment variables.
> > > > Erase /dev/env0 and saveenv do not make a difference.
> > > > Nandtest does not give me errors...
> > > >
> > > > I'm just using the latest barebox 2014.2 and loading it on a
> > > > at91sam9260-ek through usb (sam-ba). I'm just using the plain
> > > > at91sam9260ek_defconfig
> > >
> > > Seems there's something broken. I have no better idea other than bisecting
> it.
> > >
> >
> > Is there a version which is definitely working and tested with at91sam9260-ek?
> 
> I'd probably start at somewhere near:
> 
> ecdb717 at91/boards: switch to software ecc as in linux kernel
> 
> But I don't know if that version really works.
> 
> (If you don't know already, you can always start barebox second stage from an
> already running barebox, normally you shouldn't have to reflash for each
> bisecting step. Something like "tftp barebox.bin /dev/ram0; go /dev/ram0"
> should work.)
> 

I did some tests and seems that it worked ok until version release 2013.08.0, from 2013.09.0 on it gives me these errors...