[PATCH] arm: imx53: qsb: set hostname from board file

[Lucas Stach]

Otherwise it won't get set in a multiimage build.

Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
---
 arch/arm/boards/freescale-mx53-qsb/board.c          | 2 ++
 arch/arm/boards/freescale-mx53-qsb/env/config-board | 1 -
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boards/freescale-mx53-qsb/board.c b/arch/arm/boards/freescale-mx53-qsb/board.c
index 74826e4a5e43..0553f1c82895 100644
--- a/arch/arm/boards/freescale-mx53-qsb/board.c
+++ b/arch/arm/boards/freescale-mx53-qsb/board.c
@@ -99,6 +99,7 @@ static int loco_late_init(void)
 		rev = readl(MX53_IIM_BASE_ADDR + 0x878);
 		set_board_rev(rev);
 		printf("MCIMX53-START-R board 1.0 rev %c\n", (rev == 1) ? 'A' : 'B' );
+		barebox_set_hostname("loco-r");
 		armlinux_set_revision(loco_system_rev);
 		/* Set VDDGP to 1.25V for 1GHz on SW1 */
 		mc13xxx_reg_read(mc34708, MC13892_REG_SW_0, &val);
@@ -146,6 +147,7 @@ static int loco_late_init(void)
 	} else {
 		/* so we have a DA9053 based board */
 		printf("MCIMX53-START board 1.0\n");
+		barebox_set_hostname("loco");
 		armlinux_set_revision(loco_system_rev);
 		return 0;
 	}
diff --git a/arch/arm/boards/freescale-mx53-qsb/env/config-board b/arch/arm/boards/freescale-mx53-qsb/env/config-board
index a6cf69ddbc7f..e8e8378f53f5 100644
--- a/arch/arm/boards/freescale-mx53-qsb/env/config-board
+++ b/arch/arm/boards/freescale-mx53-qsb/env/config-board
@@ -3,5 +3,4 @@
 # board defaults, do not change in running system. Change /env/config
 # instead
 
-global.hostname=loco
 global.linux.bootargs.base="console=ttymxc0,115200"
-- 
1.9.0