[PATCH v2 1/7] sata-imx: i.MX53, use the internal 120MHz clock by default

[Sascha Hauer]

On Mon, Mar 10, 2014 at 08:51:12AM +0100, Eric Bénard wrote:
> Hi Sascha,
> 
> Le Mon, 10 Mar 2014 08:09:57 +0100,
> Sascha Hauer <s.hauer at pengutronix.de> a écrit :
> 
> > On Fri, Mar 07, 2014 at 11:39:57AM +0100, Eric Bénard wrote:
> > > this allows SATA to work on i.MX53 QSB-R :
> > > barebox at Freescale i.MX53 Quick Start-R Board:/ ata0.probe=1
> > > imx-sata 10000000.sata: port 0: SATA link ok
> > > imx-sata 10000000.sata: port 0: Spinning up device...
> > > imx-sata 10000000.sata: port 0: ok.
> > > ata0: registered /dev/ata0
> > > 
> > > before this fix the log was :
> > > barebox at Freescale i.MX53 Quick Start-R Board:/ ata0.probe=1
> > > imx-sata 10000000.sata: port 0: SATA link timeout
> > > set parameter: Connection timed out
> > > 
> > > Signed-off-by: Eric Bénard <eric at eukrea.com>
> > > ---
> > >  drivers/ata/sata-imx.c | 2 +-
> > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/ata/sata-imx.c b/drivers/ata/sata-imx.c
> > > index b7bd110..450cf4f 100644
> > > --- a/drivers/ata/sata-imx.c
> > > +++ b/drivers/ata/sata-imx.c
> > > @@ -59,7 +59,7 @@ static int imx53_sata_init(struct imx_ahci *imx_ahci)
> > >  	 */
> > >  	val = readl(base + 0x180c);
> > >  	val &= (0x3 << 1);
> > > -	val |= (0x1 << 1);
> > > +	val |= (0x2 << 1);
> > >  	writel(val, base + 0x180c);
> > 
> > I haven't applied this yet. Have you tested this on the regular (not -R)
> > variant of the board? If not I'd like to do that before applying.
> 
> I can try to test on an original QSB (with Dialog PMIC) but I don't see
> why that would change as the difference between QSB and QSB-R is the
> PMIC (Dialog to Freescale) and here we only change the clock source of
> the SATA which has nothing to see with the PMIC.

Yeah, you're probably right. I just wonder why we explicitly used the
external clock in the first place and if there's a reason to make this
configurable.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |