[PATCH v2 4/8] serial: ns16550: make FCR setup value part of struct ns16550_priv
Antony Pavlov
antonynpavlov at gmail.com
Mon Mar 24 16:28:25 EDT 2014
On Tue, 25 Mar 2014 00:13:50 +0400
Antony Pavlov <antonynpavlov at gmail.com> wrote:
This patch can be very handy for adding device tree FIFO-less controllers support in the future.
E.g.: .compatible = "ns8250" or .compatible = "ns16450"
> Signed-off-by: Antony Pavlov <antonynpavlov at gmail.com>
> ---
> drivers/serial/serial_ns16550.c | 13 +++++++------
> 1 file changed, 7 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c
> index d217014..0089a04 100644
> --- a/drivers/serial/serial_ns16550.c
> +++ b/drivers/serial/serial_ns16550.c
> @@ -48,6 +48,7 @@ struct ns16550_priv {
> struct NS16550_plat plat;
> int access_width;
> struct clk *clk;
> + uint32_t fcrval;
> };
>
> static inline struct ns16550_priv *to_ns16550_priv(struct console_device *cdev)
> @@ -157,18 +158,13 @@ static int ns16550_setbaudrate(struct console_device *cdev, int baud_rate)
> {
> unsigned int baud_divisor = ns16550_calc_divisor(cdev, baud_rate);
> struct ns16550_priv *priv = to_ns16550_priv(cdev);
> - struct NS16550_plat *plat = &priv->plat;
>
> ns16550_write(cdev, LCR_BKSE, lcr);
> ns16550_write(cdev, baud_divisor & 0xff, dll);
> ns16550_write(cdev, (baud_divisor >> 8) & 0xff, dlm);
> ns16550_write(cdev, LCRVAL, lcr);
> ns16550_write(cdev, MCRVAL, mcr);
> -
> - if (plat->flags & NS16650_FLAG_DISABLE_FIFO)
> - ns16550_write(cdev, FCRVAL & ~FCR_FIFO_EN, fcr);
> - else
> - ns16550_write(cdev, FCRVAL, fcr);
> + ns16550_write(cdev, priv->fcrval, fcr);
>
> return 0;
> }
> @@ -316,6 +312,11 @@ static int ns16550_probe(struct device_d *dev)
> cdev->setbrg = ns16550_setbaudrate;
> cdev->linux_console_name = devtype->linux_console_name;
>
> + if (plat->flags & NS16650_FLAG_DISABLE_FIFO)
> + priv->fcrval = FCRVAL & ~FCR_FIFO_EN;
> + else
> + priv->fcrval = FCRVAL;
> +
> devtype->init_port(cdev);
>
> return console_register(cdev);
> --
> 1.9.0
>
--
--
Best regards,
Antony Pavlov
More information about the barebox
mailing list