[PATCH] ARM: i.MX27: dts: Separate barebox-specific DT changes
Alexander Shiyan
shc_work at mail.ru
Sun Mar 16 04:27:24 EDT 2014
To ease DT import from Linux, which is still maintained in-tree, we
separate barebox-specific changes by including the original dts in
a separate DT file. This allows to overlay modifications and keep
clean DT history. Additionally, this patch updates i.MX27 DTS tree.
Signed-off-by: Alexander Shiyan <shc_work at mail.ru>
---
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/imx27-phytec-phycard-s-rdk-bb.dts | 38 +++++++
arch/arm/dts/imx27-phytec-phycard-s-rdk.dts | 39 +++++--
arch/arm/dts/imx27-phytec-phycard-s-som.dts | 102 -----------------
arch/arm/dts/imx27-phytec-phycard-s-som.dtsi | 103 +++++++++++++++++
arch/arm/dts/imx27-pingrp.h | 151 -------------------------
arch/arm/dts/imx27.dtsi | 59 +++++++++-
7 files changed, 229 insertions(+), 266 deletions(-)
create mode 100644 arch/arm/dts/imx27-phytec-phycard-s-rdk-bb.dts
delete mode 100644 arch/arm/dts/imx27-phytec-phycard-s-som.dts
create mode 100644 arch/arm/dts/imx27-phytec-phycard-s-som.dtsi
delete mode 100644 arch/arm/dts/imx27-pingrp.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 6bac3b9..8ba31b1 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -3,8 +3,7 @@ dtb-$(CONFIG_ARCH_AM33XX) += \
am335x-boneblack.dtb \
am335x-phytec-phycore.dtb
dtb-$(CONFIG_ARCH_IMX25) += imx25-karo-tx25.dtb
-dtb-$(CONFIG_ARCH_IMX27) += imx27-phytec-phycard-s-rdk.dtb \
- imx27-phytec-phycard-s-som.dtb
+dtb-$(CONFIG_ARCH_IMX27) += imx27-phytec-phycard-s-rdk-bb.dtb
dtb-$(CONFIG_ARCH_IMX51) += imx51-babbage.dtb \
imx51-genesi-efika-sb.dtb
dtb-$(CONFIG_ARCH_IMX53) += imx53-mba53.dtb \
diff --git a/arch/arm/dts/imx27-phytec-phycard-s-rdk-bb.dts b/arch/arm/dts/imx27-phytec-phycard-s-rdk-bb.dts
new file mode 100644
index 0000000..cecfc5a
--- /dev/null
+++ b/arch/arm/dts/imx27-phytec-phycard-s-rdk-bb.dts
@@ -0,0 +1,38 @@
+/*
+ * Barebox specific DT overlay for Phytec PCA100 RDK
+ */
+
+#include "imx27-phytec-phycard-s-rdk.dts"
+
+/ {
+ chosen {
+ linux,stdout-path = &uart1;
+
+ environment at 0 {
+ compatible = "barebox,environment";
+ device-path = &nfc, "partname:environment";
+ };
+ };
+};
+
+&nfc {
+ partition at 0 {
+ label = "boot";
+ reg = <0x0 0x80000>;
+ };
+
+ partition at 1 {
+ label = "environment";
+ reg = <0x80000 0x80000>;
+ };
+
+ partition at 2 {
+ label = "kernel";
+ reg = <0x100000 0x400000>;
+ };
+
+ partition at 3 {
+ label = "root";
+ reg = <0x500000 0x7b00000>;
+ };
+};
diff --git a/arch/arm/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/dts/imx27-phytec-phycard-s-rdk.dts
index fb2b874..3c3964a 100644
--- a/arch/arm/dts/imx27-phytec-phycard-s-rdk.dts
+++ b/arch/arm/dts/imx27-phytec-phycard-s-rdk.dts
@@ -9,7 +9,7 @@
* http://www.gnu.org/copyleft/gpl.html
*/
-#include "imx27-phytec-phycard-s-som.dts"
+#include "imx27-phytec-phycard-s-som.dtsi"
/ {
model = "Phytec pca100 rapid development kit";
@@ -76,35 +76,54 @@
&iomuxc {
imx27-phycard-s-rdk {
pinctrl_i2c1: i2c1grp {
- fsl,pins = <MX27_I2C2_PINGRP1>;
+ fsl,pins = <
+ MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+ MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+ >;
};
pinctrl_owire1: owire1grp {
- fsl,pins = <MX27_OWIRE1_PINGRP1>;
+ fsl,pins = <
+ MX27_PAD_RTCK__OWIRE 0x0
+ >;
};
pinctrl_sdhc2: sdhc2grp {
- fsl,pins = <MX27_SDHC2_PINGRP1>;
+ fsl,pins = <
+ MX27_PAD_SD2_CLK__SD2_CLK 0x0
+ MX27_PAD_SD2_CMD__SD2_CMD 0x0
+ MX27_PAD_SD2_D0__SD2_D0 0x0
+ MX27_PAD_SD2_D1__SD2_D1 0x0
+ MX27_PAD_SD2_D2__SD2_D2 0x0
+ MX27_PAD_SD2_D3__SD2_D3 0x0
+ MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */
+ >;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
- MX27_UART1_PINGRP1
- MX27_UART1_RTSCTS_PINGRP1
+ MX27_PAD_UART1_TXD__UART1_TXD 0x0
+ MX27_PAD_UART1_RXD__UART1_RXD 0x0
+ MX27_PAD_UART1_CTS__UART1_CTS 0x0
+ MX27_PAD_UART1_RTS__UART1_RTS 0x0
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
- MX27_UART2_PINGRP1
- MX27_UART2_RTSCTS_PINGRP1
+ MX27_PAD_UART2_TXD__UART2_TXD 0x0
+ MX27_PAD_UART2_RXD__UART2_RXD 0x0
+ MX27_PAD_UART2_CTS__UART2_CTS 0x0
+ MX27_PAD_UART2_RTS__UART2_RTS 0x0
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
- MX27_UART3_PINGRP1
- MX27_UART3_RTSCTS_PINGRP1
+ MX27_PAD_UART3_TXD__UART3_TXD 0x0
+ MX27_PAD_UART3_RXD__UART3_RXD 0x0
+ MX27_PAD_UART3_CTS__UART3_CTS 0x0
+ MX27_PAD_UART3_RTS__UART3_RTS 0x0
>;
};
};
diff --git a/arch/arm/dts/imx27-phytec-phycard-s-som.dts b/arch/arm/dts/imx27-phytec-phycard-s-som.dts
deleted file mode 100644
index a48d4e1..0000000
--- a/arch/arm/dts/imx27-phytec-phycard-s-som.dts
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
- * and Markus Pargmann, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
- model = "Phytec pca100";
- compatible = "phytec,imx27-pca100", "fsl,imx27";
-
- chosen {
- linux,stdout-path = &uart1;
-
- environment at 0 {
- compatible = "barebox,environment";
- device-path = &nfc, "partname:environment";
- };
- };
-
- memory {
- reg = <0xa0000000 0x08000000>; /* 128MB */
- };
-};
-
-&cspi1 {
- fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
- <&gpio4 27 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-&iomuxc {
- imx27-phycard-s-som {
- pinctrl_fec1: fec1grp {
- fsl,pins = <MX27_FEC1_PINGRP1>;
- };
-
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <MX27_I2C2_PINGRP1>;
- };
-
- pinctrl_nfc: nfcgrp {
- fsl,pins = <MX27_NFC_PINGRP1>;
- };
- };
-};
-
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec1>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- status = "okay";
-
- at24 at 52 {
- compatible = "at,24c32";
- pagesize = <32>;
- reg = <0x52>;
- };
-};
-
-&nfc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_nfc>;
- nand-bus-width = <8>;
- nand-ecc-mode = "hw";
- nand-on-flash-bbt;
- status = "okay";
-
- partition at 0 {
- label = "boot";
- reg = <0x0 0x80000>;
- };
-
- partition at 1 {
- label = "environment";
- reg = <0x80000 0x80000>;
- };
-
- partition at 2 {
- label = "kernel";
- reg = <0x100000 0x400000>;
- };
-
- partition at 3 {
- label = "root";
- reg = <0x500000 0x7b00000>;
- };
-};
diff --git a/arch/arm/dts/imx27-phytec-phycard-s-som.dtsi b/arch/arm/dts/imx27-phytec-phycard-s-som.dtsi
new file mode 100644
index 0000000..1b62480
--- /dev/null
+++ b/arch/arm/dts/imx27-phytec-phycard-s-som.dtsi
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
+ * and Markus Pargmann, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+ model = "Phytec pca100";
+ compatible = "phytec,imx27-pca100", "fsl,imx27";
+
+ memory {
+ reg = <0xa0000000 0x08000000>; /* 128MB */
+ };
+};
+
+&cspi1 {
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
+ <&gpio4 27 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ at24 at 52 {
+ compatible = "at,24c32";
+ pagesize = <32>;
+ reg = <0x52>;
+ };
+};
+
+&iomuxc {
+ imx27-phycard-s-som {
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+ MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+ MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+ MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+ MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+ MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+ MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+ MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+ MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+ MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+ MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+ MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+ MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+ MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+ MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+ MX27_PAD_ATA_DATA13__FEC_COL 0x0
+ MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+ MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+ MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+ >;
+ };
+
+ pinctrl_nfc: nfcgrp {
+ fsl,pins = <
+ MX27_PAD_NFRB__NFRB 0x0
+ MX27_PAD_NFCLE__NFCLE 0x0
+ MX27_PAD_NFWP_B__NFWP_B 0x0
+ MX27_PAD_NFCE_B__NFCE_B 0x0
+ MX27_PAD_NFALE__NFALE 0x0
+ MX27_PAD_NFRE_B__NFRE_B 0x0
+ MX27_PAD_NFWE_B__NFWE_B 0x0
+ >;
+ };
+ };
+};
+
+&nfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nfc>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ status = "okay";
+};
diff --git a/arch/arm/dts/imx27-pingrp.h b/arch/arm/dts/imx27-pingrp.h
deleted file mode 100644
index 57ca02f..0000000
--- a/arch/arm/dts/imx27-pingrp.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Copyright 2013 Markus Pargmann <mpa at pengutronix.de>, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __DTS_IMX27_PINGRP_H
-#define __DTS_IMX27_PINGRP_H
-
-#include "imx27-pinfunc.h"
-
-#define MX27_CSPI1_PINGRP1 \
- MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0 \
- MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0 \
- MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
-
-#define MX27_CSPI2_PINGRP1 \
- MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0 \
- MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0 \
- MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
-
-#define MX27_CSPI3_PINGRP1 \
- MX27_PAD_SD1_CLK__CSPI3_SCLK 0x0 \
- MX27_PAD_SD1_D0__CSPI3_MISO 0x0 \
- MX27_PAD_SD1_CMD__CSPI3_MOSI 0x0
-
-#define MX27_FB_PINGRP1 \
- MX27_PAD_CLS__CLS 0x0 \
- MX27_PAD_CONTRAST__CONTRAST 0x0 \
- MX27_PAD_LD0__LD0 0x0 \
- MX27_PAD_LD1__LD1 0x0 \
- MX27_PAD_LD2__LD2 0x0 \
- MX27_PAD_LD3__LD3 0x0 \
- MX27_PAD_LD4__LD4 0x0 \
- MX27_PAD_LD5__LD5 0x0 \
- MX27_PAD_LD6__LD6 0x0 \
- MX27_PAD_LD7__LD7 0x0 \
- MX27_PAD_LD8__LD8 0x0 \
- MX27_PAD_LD9__LD9 0x0 \
- MX27_PAD_LD10__LD10 0x0 \
- MX27_PAD_LD11__LD11 0x0 \
- MX27_PAD_LD12__LD12 0x0 \
- MX27_PAD_LD13__LD13 0x0 \
- MX27_PAD_LD14__LD14 0x0 \
- MX27_PAD_LD15__LD15 0x0 \
- MX27_PAD_LD16__LD16 0x0 \
- MX27_PAD_LD17__LD17 0x0 \
- MX27_PAD_LSCLK__LSCLK 0x0 \
- MX27_PAD_OE_ACD__OE_ACD 0x0 \
- MX27_PAD_PS__PS 0x0 \
- MX27_PAD_REV__REV 0x0 \
- MX27_PAD_SPL_SPR__SPL_SPR 0x0 \
- MX27_PAD_HSYNC__HSYNC 0x0 \
- MX27_PAD_VSYNC__VSYNC 0x0
-
-#define MX27_FEC1_PINGRP1 \
- MX27_PAD_SD3_CMD__FEC_TXD0 0x0 \
- MX27_PAD_SD3_CLK__FEC_TXD1 0x0 \
- MX27_PAD_ATA_DATA0__FEC_TXD2 0x0 \
- MX27_PAD_ATA_DATA1__FEC_TXD3 0x0 \
- MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0 \
- MX27_PAD_ATA_DATA3__FEC_RXD1 0x0 \
- MX27_PAD_ATA_DATA4__FEC_RXD2 0x0 \
- MX27_PAD_ATA_DATA5__FEC_RXD3 0x0 \
- MX27_PAD_ATA_DATA6__FEC_MDIO 0x0 \
- MX27_PAD_ATA_DATA7__FEC_MDC 0x0 \
- MX27_PAD_ATA_DATA8__FEC_CRS 0x0 \
- MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0 \
- MX27_PAD_ATA_DATA10__FEC_RXD0 0x0 \
- MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0 \
- MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0 \
- MX27_PAD_ATA_DATA13__FEC_COL 0x0 \
- MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0 \
- MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
-
-#define MX27_I2C1_PINGRP1 \
- MX27_PAD_I2C_DATA__I2C_DATA 0x0 \
- MX27_PAD_I2C_CLK__I2C_CLK 0x0
-
-#define MX27_I2C2_PINGRP1 \
- MX27_PAD_I2C2_SDA__I2C2_SDA 0x0 \
- MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
-
-#define MX27_NFC_PINGRP1 \
- MX27_PAD_NFRB__NFRB 0x0 \
- MX27_PAD_NFCLE__NFCLE 0x0 \
- MX27_PAD_NFWP_B__NFWP_B 0x0 \
- MX27_PAD_NFCE_B__NFCE_B 0x0 \
- MX27_PAD_NFALE__NFALE 0x0 \
- MX27_PAD_NFRE_B__NFRE_B 0x0 \
- MX27_PAD_NFWE_B__NFWE_B 0x0
-
-#define MX27_OWIRE1_PINGRP1 \
- MX27_PAD_RTCK__OWIRE 0x0
-
-#define MX27_PWM_PINGRP1 \
- MX27_PAD_PWMO__PWMO 0x0
-
-#define MX27_SDHC1_PINGRP1 \
- MX27_PAD_SD1_CLK__SD1_CLK 0x0 \
- MX27_PAD_SD1_CMD__SD1_CMD 0x0 \
- MX27_PAD_SD1_D0__SD1_D0 0x0 \
- MX27_PAD_SD1_D1__SD1_D1 0x0 \
- MX27_PAD_SD1_D2__SD1_D2 0x0 \
- MX27_PAD_SD1_D3__SD1_D3 0x0
-
-#define MX27_SDHC2_PINGRP1 \
- MX27_PAD_SD2_CLK__SD2_CLK 0x0 \
- MX27_PAD_SD2_CMD__SD2_CMD 0x0 \
- MX27_PAD_SD2_D0__SD2_D0 0x0 \
- MX27_PAD_SD2_D1__SD2_D1 0x0 \
- MX27_PAD_SD2_D2__SD2_D2 0x0 \
- MX27_PAD_SD2_D3__SD2_D3 0x0
-
-#define MX27_SDHC3_PINGRP1 \
- MX27_PAD_SD3_CLK__SD3_CLK 0x0 \
- MX27_PAD_SD3_CMD__SD3_CMD 0x0 \
- MX27_PAD_SD3_D0__SD3_D0 0x0 \
- MX27_PAD_SD3_D1__SD3_D1 0x0 \
- MX27_PAD_SD3_D2__SD3_D2 0x0 \
- MX27_PAD_SD3_D3__SD3_D3 0x0
-
-#define MX27_UART1_PINGRP1 \
- MX27_PAD_UART1_TXD__UART1_TXD 0x0 \
- MX27_PAD_UART1_RXD__UART1_RXD 0x0
-
-#define MX27_UART1_RTSCTS_PINGRP1 \
- MX27_PAD_UART1_CTS__UART1_CTS 0x0 \
- MX27_PAD_UART1_RTS__UART1_RTS 0x0
-
-#define MX27_UART2_PINGRP1 \
- MX27_PAD_UART2_TXD__UART2_TXD 0x0 \
- MX27_PAD_UART2_RXD__UART2_RXD 0x0
-
-#define MX27_UART2_RTSCTS_PINGRP1 \
- MX27_PAD_UART2_CTS__UART2_CTS 0x0 \
- MX27_PAD_UART2_RTS__UART2_RTS 0x0
-
-#define MX27_UART3_PINGRP1 \
- MX27_PAD_UART3_TXD__UART3_TXD 0x0 \
- MX27_PAD_UART3_RXD__UART3_RXD 0x0
-
-#define MX27_UART3_RTSCTS_PINGRP1 \
- MX27_PAD_UART3_CTS__UART3_CTS 0x0 \
- MX27_PAD_UART3_RTS__UART3_RTS 0x0
-
-#endif /* __DTS_IMX27_PINGRP_H */
diff --git a/arch/arm/dts/imx27.dtsi b/arch/arm/dts/imx27.dtsi
index 7e98966..83a8247 100644
--- a/arch/arm/dts/imx27.dtsi
+++ b/arch/arm/dts/imx27.dtsi
@@ -10,12 +10,13 @@
*/
#include "skeleton.dtsi"
-#include "imx27-pingrp.h"
+#include "imx27-pinfunc.h"
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
/ {
aliases {
+ ethernet0 = &fec;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
@@ -70,6 +71,26 @@
};
};
+ usbphy {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbphy0: usbphy at 0 {
+ compatible = "usb-nop-xceiv";
+ reg = <0>;
+ clocks = <&clks 75>;
+ clock-names = "main_clk";
+ };
+
+ usbphy2: usbphy at 2 {
+ compatible = "usb-nop-xceiv";
+ reg = <2>;
+ clocks = <&clks 75>;
+ clock-names = "main_clk";
+ };
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -439,6 +460,42 @@
iram = <&iram>;
};
+ usbotg: usb at 10024000 {
+ compatible = "fsl,imx27-usb";
+ reg = <0x10024000 0x200>;
+ interrupts = <56>;
+ clocks = <&clks 15>;
+ fsl,usbmisc = <&usbmisc 0>;
+ fsl,usbphy = <&usbphy0>;
+ status = "disabled";
+ };
+
+ usbh1: usb at 10024200 {
+ compatible = "fsl,imx27-usb";
+ reg = <0x10024200 0x200>;
+ interrupts = <54>;
+ clocks = <&clks 15>;
+ fsl,usbmisc = <&usbmisc 1>;
+ status = "disabled";
+ };
+
+ usbh2: usb at 10024400 {
+ compatible = "fsl,imx27-usb";
+ reg = <0x10024400 0x200>;
+ interrupts = <55>;
+ clocks = <&clks 15>;
+ fsl,usbmisc = <&usbmisc 2>;
+ fsl,usbphy = <&usbphy2>;
+ status = "disabled";
+ };
+
+ usbmisc: usbmisc at 10024600 {
+ #index-cells = <1>;
+ compatible = "fsl,imx27-usbmisc";
+ reg = <0x10024600 0x200>;
+ clocks = <&clks 62>;
+ };
+
sahara2: sahara at 10025000 {
compatible = "fsl,imx27-sahara";
reg = <0x10025000 0x1000>;
--
1.8.3.2
More information about the barebox
mailing list