[PATCH 4/6] ARM: pfla02: Set ODT to recommended setting

[Christian Hemp]

Hello Sascha,

We removed this ODT values, because we had problems. I think before we
use this settings we have to do some tests (climate cabinet...) with
different modules.


Christian

Am Freitag, den 14.03.2014, 14:30 +0100 schrieb Sascha Hauer:
> From: Christian Hemp <c.hemp at phytec.de>
> 
> Change the ODT values to  0x11117 (Recommended from Freescale)
> see App note AN4579 "i.MX 6 Series Thermal Management Guidelines"
> 
> Signed-off-by: Christian Hemp <c.hemp at phytec.de>
> Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
> ---
>  arch/arm/boards/phytec-phyflex-imx6/flash-header-phytec-pfla02.h | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boards/phytec-phyflex-imx6/flash-header-phytec-pfla02.h b/arch/arm/boards/phytec-phyflex-imx6/flash-header-phytec-pfla02.h
> index 138ae36..fd09054 100644
> --- a/arch/arm/boards/phytec-phyflex-imx6/flash-header-phytec-pfla02.h
> +++ b/arch/arm/boards/phytec-phyflex-imx6/flash-header-phytec-pfla02.h
> @@ -75,8 +75,8 @@ wm 32 0x021b001c 0x04008048
>  wm 32 0x021b0800 0xa1380003
>  wm 32 0x021b4800 0xa1380003
>  wm 32 0x021b0020 0x00005800
> -wm 32 0x021b0818 0x00022227
> -wm 32 0x021b4818 0x00022227
> +wm 32 0x021b0818 0x00011117
> +wm 32 0x021b4818 0x00011117
>  wm 32 0x021b083c 0x433c033f
>  wm 32 0x021b0840 0x033e033d
>  wm 32 0x021b483c 0x43490351