October 2022 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sat Oct 1 23:45:36 PDT 2022
Ending: Mon Oct 31 18:03:27 PDT 2022
Messages: 697

• [RFC PATCH 0/4] Add RGB ttl connection on rockchip phy   Michael Trimarchi
• [RFC PATCH 1/4] phy: add PHY_MODE_TTL   Michael Trimarchi
• [RFC PATCH 2/4] phy: rockchip: Add inno_is_valid_phy_mode   Michael Trimarchi
• [RFC PATCH 3/4] phy: rockchip: Implement TTY phy mode   Michael Trimarchi
• [RFC PATCH 4/4] drm/rockchip: rgb: Add dphy connection to rgb output   Michael Trimarchi
• [PATCH v10 3/4] phy: freescale: imx8m-pcie: Refine i.MX8MM PCIe PHY driver   Hongxing Zhu
• [PATCH v10 4/4] phy: freescale: imx8m-pcie: Add i.MX8MP PCIe PHY support   Hongxing Zhu
• [PATCH v11 0/4] Add the iMX8MP PCIe support   Richard Zhu
• [PATCH v11 1/4] dt-binding: phy: Add i.MX8MP PCIe PHY binding   Richard Zhu
• [PATCH v11 2/4] phy: freescale: imx8m-pcie: Refine register definitions   Richard Zhu
• [PATCH v11 3/4] phy: freescale: imx8m-pcie: Refine i.MX8MM PCIe PHY driver   Richard Zhu
• [PATCH v11 4/4] phy: freescale: imx8m-pcie: Add i.MX8MP PCIe PHY support   Richard Zhu
• [PATCH v7 1/5] PCI: qcom: Add system suspend and resume support   Krishna Chaitanya Chundru
• [PATCH v1 17/17] drm/mediatek: Add mt8195-dpi support to drm_drv   Guillaume Ranquet
• [PATCH v1 09/17] drm/mediatek: hdmi: add connector flag   Guillaume Ranquet
• [PATCH v6 4/8] phy: fsl: Add Lynx 10G SerDes driver   Sean Anderson
• [PATCH v1 17/17] drm/mediatek: Add mt8195-dpi support to drm_drv   Krzysztof Kozlowski
• [PATCH v1 17/17] drm/mediatek: Add mt8195-dpi support to drm_drv   Guillaume Ranquet
• [PATCH v1 17/17] drm/mediatek: Add mt8195-dpi support to drm_drv   Krzysztof Kozlowski
• [PATCH v5 1/5] dt-bindings: phy: rockchip: add PCIe v3 phy   Rob Herring
• [PATCH v5 1/5] dt-bindings: phy: rockchip: add PCIe v3 phy   Frank Wunderlich
• [PATCH v5 1/5] dt-bindings: phy: rockchip: add PCIe v3 phy   Sebastian Reichel
• [PATCH] phy: tegra: xusb: Remove usb3 supply   Haotien Hsu
• [PATCH v1 17/17] drm/mediatek: Add mt8195-dpi support to drm_drv   Guillaume Ranquet
• [PATCH v1 17/17] drm/mediatek: Add mt8195-dpi support to drm_drv   Krzysztof Kozlowski
• [PATCH v4] phy: rockchip-inno-usb2: Return zero after otg sync   Chen-Yu Tsai
• [PATCH v7 1/5] PCI: qcom: Add system suspend and resume support   Bjorn Helgaas
• [PATCH 0/6] Various bug fixes/improvements for phy-brcm-usb driver   justinpopo6 at gmail.com
• [PATCH 1/6] phy: usb: Improve port mode selection   justinpopo6 at gmail.com
• [PATCH 2/6] phy: usb: s2 WoL wakeup_count not incremented for USB->Eth devices   justinpopo6 at gmail.com
• [PATCH 3/6] phy: usb: Migrate to BIT and BITMASK macros   justinpopo6 at gmail.com
• [PATCH 4/6] phy: usb: Disable phy auto-suspend   justinpopo6 at gmail.com
• [PATCH 5/6] phy: usb: Use slow clock for wake enabled suspend   justinpopo6 at gmail.com
• [PATCH 6/6] phy: usb: Fix clock imbalance for suspend/resume   justinpopo6 at gmail.com
• [PATCH v2 2/2] phy: mediatek: tphy: add debugfs files   Chunfeng Yun
• [PATCH v3 1/2] phy: core: add debugfs root   Chunfeng Yun
• [PATCH v3 2/2] phy: mediatek: tphy: add debugfs files   Chunfeng Yun
• [PATCH v2 2/2] phy: mediatek: tphy: add debugfs files   AngeloGioacchino Del Regno
• [PATCH 1/6] phy: usb: Improve port mode selection   Florian Fainelli
• [PATCH 2/6] phy: usb: s2 WoL wakeup_count not incremented for USB->Eth devices   Florian Fainelli
• [PATCH 3/6] phy: usb: Migrate to BIT and BITMASK macros   Florian Fainelli
• [PATCH 4/6] phy: usb: Disable phy auto-suspend   Florian Fainelli
• [PATCH 5/6] phy: usb: Use slow clock for wake enabled suspend   Florian Fainelli
• [PATCH 6/6] phy: usb: Fix clock imbalance for suspend/resume   Florian Fainelli
• [PATCH] MAINTAINERS: Update maintainers for broadcom USB   justinpopo6 at gmail.com
• [PATCH] MAINTAINERS: Update maintainers for broadcom USB   Florian Fainelli
• [PATCH] MAINTAINERS: Update maintainers for broadcom USB   Greg KH
• [PATCH] MAINTAINERS: Update maintainers for broadcom USB   Justin Chen
• [PATCH] MAINTAINERS: Update maintainers for broadcom USB   Greg KH
• [PATCH] MAINTAINERS: Update maintainers for broadcom USB   Justin Chen
• [PATCH] MAINTAINERS: Update maintainers for broadcom USB   Greg KH
• [GIT PULL]: Generic phy updates for v6.1-rc1   Vinod Koul
• [PATCH] MAINTAINERS: Update maintainers for broadcom USB   Florian Fainelli
• [PATCH] MAINTAINERS: Update maintainers for broadcom USB   Greg KH
• [GIT PULL]: Generic phy updates for v6.1-rc1   pr-tracker-bot at kernel.org
• [PATCH] phy: marvell: phy-mvebu-a3700-comphy: Reset COMPHY registers before USB 3.0 power on   Pali Rohár
• [PATCH] phy: marvell: phy-mvebu-a3700-comphy: Reset COMPHY registers before USB 3.0 power on   Vinod Koul
• [PATCH v12 0/4] Add the iMX8MP PCIe support   Richard Zhu
• [PATCH v12 1/4] dt-binding: phy: Add i.MX8MP PCIe PHY binding   Richard Zhu
• [PATCH v12 2/4] phy: freescale: imx8m-pcie: Refine register definitions   Richard Zhu
• [PATCH v12 3/4] phy: freescale: imx8m-pcie: Refine i.MX8MM PCIe PHY driver   Richard Zhu
• [PATCH v12 4/4] phy: freescale: imx8m-pcie: Add i.MX8MP PCIe PHY support   Richard Zhu
• [PATCH v2 2/2] phy: mediatek: tphy: add debugfs files   Chunfeng Yun
• [PATCH] phy: tegra: xusb: Fix crash during pad power on/down   Jon Hunter
• [PATCH v5 1/5] dt-bindings: phy: rockchip: add PCIe v3 phy   Andrew Powers-Holmes
• [PATCH 00/13] phy: qcom-qmp: further prep cleanups   Johan Hovold
• [PATCH 01/13] phy: qcom-qmp: drop regulator error message   Johan Hovold
• [PATCH 02/13] phy: qcom-qmp: drop superfluous comments   Johan Hovold
• [PATCH 03/13] phy: qcom-qmp-combo: drop unused in-layout configuration   Johan Hovold
• [PATCH 04/13] phy: qcom-qmp-pcie: drop redundant ipq8074 power on   Johan Hovold
• [PATCH 05/13] phy: qcom-qmp-pcie-msm8996: drop unused in-layout configuration   Johan Hovold
• [PATCH 06/13] phy: qcom-qmp-ufs: drop unused in-layout configuration   Johan Hovold
• [PATCH 07/13] phy: qcom-qmp-usb: drop unused in-layout configuration   Johan Hovold
• [PATCH 08/13] phy: qcom-qmp-pcie: drop power-down delay config   Johan Hovold
• [PATCH 09/13] phy: qcom-qmp-pcie-msm8996: drop power-down delay config   Johan Hovold
• [PATCH 10/13] phy: qcom-qmp-combo: drop sc8280xp power-down delay   Johan Hovold
• [PATCH 11/13] phy: qcom-qmp-combo: drop power-down delay config   Johan Hovold
• [PATCH 12/13] phy: qcom-qmp-usb: drop sc8280xp power-down delay   Johan Hovold
• [PATCH 13/13] phy: qcom-qmp-usb: drop power-down delay config   Johan Hovold
• [PATCH 08/13] phy: qcom-qmp-pcie: drop power-down delay config   Dmitry Baryshkov
• [PATCH 09/13] phy: qcom-qmp-pcie-msm8996: drop power-down delay config   Dmitry Baryshkov
• [PATCH 08/13] phy: qcom-qmp-pcie: drop power-down delay config   Dmitry Baryshkov
• [PATCH 04/13] phy: qcom-qmp-pcie: drop redundant ipq8074 power on   Dmitry Baryshkov
• [PATCH 03/13] phy: qcom-qmp-combo: drop unused in-layout configuration   Dmitry Baryshkov
• [PATCH 02/13] phy: qcom-qmp: drop superfluous comments   Dmitry Baryshkov
• [PATCH 01/13] phy: qcom-qmp: drop regulator error message   Dmitry Baryshkov
• [PATCH 05/13] phy: qcom-qmp-pcie-msm8996: drop unused in-layout configuration   Dmitry Baryshkov
• [PATCH 06/13] phy: qcom-qmp-ufs: drop unused in-layout configuration   Dmitry Baryshkov
• [PATCH 08/13] phy: qcom-qmp-pcie: drop power-down delay config   Johan Hovold
• [PATCH 08/13] phy: qcom-qmp-pcie: drop power-down delay config   Dmitry Baryshkov
• [PATCH 11/13] phy: qcom-qmp-combo: drop power-down delay config   Dmitry Baryshkov
• [PATCH 13/13] phy: qcom-qmp-usb: drop power-down delay config   Dmitry Baryshkov
• [PATCH 10/13] phy: qcom-qmp-combo: drop sc8280xp power-down delay   Dmitry Baryshkov
• [PATCH 08/13] phy: qcom-qmp-pcie: drop power-down delay config   Johan Hovold
• [PATCH 10/13] phy: qcom-qmp-combo: drop sc8280xp power-down delay   Johan Hovold
• [PATCH 08/13] phy: qcom-qmp-pcie: drop power-down delay config   Dmitry Baryshkov
• [PATCH v2 00/10] SUNIV USB and PopStick support (and updating mailmap)   Icenowy Zheng
• [PATCH v2 01/10] mailmap: update Icenowy Zheng's mail address   Icenowy Zheng
• [PATCH v2 02/10] dt-bindings: phy: add binding document for Allwinner F1C100s USB PHY   Icenowy Zheng
• [PATCH v2 03/10] dt-bindings: usb: sunxi-musb: add F1C100s MUSB compatible string   Icenowy Zheng
• [PATCH v2 04/10] phy: sun4i-usb: add support for the USB PHY on F1C100s SoC   Icenowy Zheng
• [PATCH v2 05/10] musb: sunxi: add support for the F1C100s MUSB controller   Icenowy Zheng
• [PATCH v2 06/10] ARM: suniv: add USB-related device nodes   Icenowy Zheng
• [PATCH v2 07/10] ARM: suniv: f1c100s: enable USB on Lichee Pi Nano   Icenowy Zheng
• [PATCH v2 08/10] dt-bindings: vendor-prefixes: add Source Parts   Icenowy Zheng
• [PATCH v2 09/10] dt-binding: arm: sunxi: add compatible strings for PopStick v1.1   Icenowy Zheng
• [PATCH v2 10/10] ARM: dts: suniv: add device tree for PopStick v1.1   Icenowy Zheng
• [PATCH 08/13] phy: qcom-qmp-pcie: drop power-down delay config   Johan Hovold
• [PATCH v2 00/14] phy: qcom-qmp: further prep cleanups   Johan Hovold
• [PATCH v2 01/14] phy: qcom-qmp: drop regulator error message   Johan Hovold
• [PATCH v2 02/14] phy: qcom-qmp: drop superfluous comments   Johan Hovold
• [PATCH v2 03/14] phy: qcom-qmp-combo: drop unused in-layout configuration   Johan Hovold
• [PATCH v2 04/14] phy: qcom-qmp-pcie: drop redundant ipq8074 power on   Johan Hovold
• [PATCH v2 05/14] phy: qcom-qmp-pcie-msm8996: drop unused in-layout configuration   Johan Hovold
• [PATCH v2 06/14] phy: qcom-qmp-ufs: drop unused in-layout configuration   Johan Hovold
• [PATCH v2 07/14] phy: qcom-qmp-usb: drop unused in-layout configuration   Johan Hovold
• [PATCH v2 08/14] phy: qcom-qmp-pcie: drop power-down delay config   Johan Hovold
• [PATCH v2 09/14] phy: qcom-qmp-pcie: replace power-down delay   Johan Hovold
• [PATCH v2 10/14] phy: qcom-qmp-pcie-msm8996: drop power-down delay config   Johan Hovold
• [PATCH v2 11/14] phy: qcom-qmp-combo: drop sc8280xp power-down delay   Johan Hovold
• [PATCH v2 12/14] phy: qcom-qmp-combo: drop power-down delay config   Johan Hovold
• [PATCH v2 13/14] phy: qcom-qmp-usb: drop sc8280xp power-down delay   Johan Hovold
• [PATCH v2 14/14] phy: qcom-qmp-usb: drop power-down delay config   Johan Hovold
• [PATCH v2 01/10] mailmap: update Icenowy Zheng's mail address   Arnd Bergmann
• [PATCH v2 01/10] mailmap: update Icenowy Zheng's mail address   Icenowy Zheng
• [PATCH v2 01/10] mailmap: update Icenowy Zheng's mail address   Arnd Bergmann
• [PATCH 00/20] phy: qcom-qmp: further prep fixes and cleanups (set 3)   Johan Hovold
• [PATCH 01/20] phy: qcom-qmp-pcie: fix sc8180x initialisation   Johan Hovold
• [PATCH 02/20] phy: qcom-qmp-pcie: fix ipq8074-gen3 initialisation   Johan Hovold
• [PATCH 03/20] phy: qcom-qmp-pcie: fix ipq6018 initialisation   Johan Hovold
• [PATCH 04/20] phy: qcom-qmp-pcie: clean up status polling   Johan Hovold
• [PATCH 05/20] phy: qcom-qmp-pcie: increase status polling period   Johan Hovold
• [PATCH 06/20] phy: qcom-qmp-pcie-msm8996: clean up ready and status polling   Johan Hovold
• [PATCH 07/20] phy: qcom-qmp-pcie-msm8996: increase status polling period   Johan Hovold
• [PATCH 08/20] phy: qcom-qmp-combo: clean up status polling   Johan Hovold
• [PATCH 09/20] phy: qcom-qmp-combo: increase status polling period   Johan Hovold
• [PATCH 10/20] phy: qcom-qmp-ufs: drop unused phy-status config   Johan Hovold
• [PATCH 11/20] phy: qcom-qmp-ufs: clean up ready polling   Johan Hovold
• [PATCH 12/20] phy: qcom-qmp-ufs: increase ready polling period   Johan Hovold
• [PATCH 13/20] phy: qcom-qmp-usb: clean up status polling   Johan Hovold
• [PATCH 14/20] phy: qcom-qmp-usb: increase status polling period   Johan Hovold
• [PATCH 15/20] phy: qcom-qmp-combo: drop start and pwrdn-ctrl abstraction   Johan Hovold
• [PATCH 16/20] phy: qcom-qmp-pcie: drop start-ctrl abstraction   Johan Hovold
• [PATCH 17/20] phy: qcom-qmp-pcie: add config sanity checks   Johan Hovold
• [PATCH 18/20] phy: qcom-qmp-pcie-msm8996: drop start and pwrdn-ctrl abstraction   Johan Hovold
• [PATCH 19/20] phy: qcom-qmp-ufs: drop start and pwrdn-ctrl abstraction   Johan Hovold
• [PATCH 20/20] phy: qcom-qmp-usb: drop start and pwrdn-ctrl abstraction   Johan Hovold
• [PATCH v2 10/10] ARM: dts: suniv: add device tree for PopStick v1.1   Clément Péron
• [PATCH v9 08/12] dt-bindings: phy: mxs-usb-phy: Add i.MX8DXL compatible string   Peng Fan
• [PATCH v2 00/14] phy: qcom-qmp: further prep cleanups   Johan Hovold
• [PATCH 00/20] phy: qcom-qmp: further prep fixes and cleanups (set 3)   Johan Hovold
• [PATCH v9 08/12] dt-bindings: phy: mxs-usb-phy: Add i.MX8DXL compatible string   Krzysztof Kozlowski
• [PATCH v2 03/10] dt-bindings: usb: sunxi-musb: add F1C100s MUSB compatible string   Krzysztof Kozlowski
• [PATCH v2 08/10] dt-bindings: vendor-prefixes: add Source Parts   Krzysztof Kozlowski
• [PATCH v2 09/10] dt-binding: arm: sunxi: add compatible strings for PopStick v1.1   Krzysztof Kozlowski
• [PATCH v2 10/10] ARM: dts: suniv: add device tree for PopStick v1.1   Krzysztof Kozlowski
• [PATCH v2 07/10] ARM: suniv: f1c100s: enable USB on Lichee Pi Nano   Krzysztof Kozlowski
• [PATCH v7 1/5] PCI: qcom: Add system suspend and resume support   Krishna Chaitanya Chundru
• [PATCH v12 0/4] Add the iMX8MP PCIe support   Tim Harvey
• [PATCH v2 07/14] phy: qcom-qmp-usb: drop unused in-layout configuration   Dmitry Baryshkov
• [PATCH v2 09/14] phy: qcom-qmp-pcie: replace power-down delay   Dmitry Baryshkov
• [PATCH v2 11/14] phy: qcom-qmp-combo: drop sc8280xp power-down delay   Dmitry Baryshkov
• [PATCH v2 13/14] phy: qcom-qmp-usb: drop sc8280xp power-down delay   Dmitry Baryshkov
• [PATCH 01/20] phy: qcom-qmp-pcie: fix sc8180x initialisation   Dmitry Baryshkov
• [PATCH 02/20] phy: qcom-qmp-pcie: fix ipq8074-gen3 initialisation   Dmitry Baryshkov
• [PATCH 03/20] phy: qcom-qmp-pcie: fix ipq6018 initialisation   Dmitry Baryshkov
• [PATCH 04/20] phy: qcom-qmp-pcie: clean up status polling   Dmitry Baryshkov
• [PATCH 06/20] phy: qcom-qmp-pcie-msm8996: clean up ready and status polling   Dmitry Baryshkov
• [PATCH 08/20] phy: qcom-qmp-combo: clean up status polling   Dmitry Baryshkov
• [PATCH 10/20] phy: qcom-qmp-ufs: drop unused phy-status config   Dmitry Baryshkov
• [PATCH 11/20] phy: qcom-qmp-ufs: clean up ready polling   Dmitry Baryshkov
• [PATCH 13/20] phy: qcom-qmp-usb: clean up status polling   Dmitry Baryshkov
• [PATCH 15/20] phy: qcom-qmp-combo: drop start and pwrdn-ctrl abstraction   Dmitry Baryshkov
• [PATCH 16/20] phy: qcom-qmp-pcie: drop start-ctrl abstraction   Dmitry Baryshkov
• [PATCH 17/20] phy: qcom-qmp-pcie: add config sanity checks   Dmitry Baryshkov
• [PATCH 18/20] phy: qcom-qmp-pcie-msm8996: drop start and pwrdn-ctrl abstraction   Dmitry Baryshkov
• [PATCH 19/20] phy: qcom-qmp-ufs: drop start and pwrdn-ctrl abstraction   Dmitry Baryshkov
• [PATCH 20/20] phy: qcom-qmp-usb: drop start and pwrdn-ctrl abstraction   Dmitry Baryshkov
• [PATCH v2 04/10] phy: sun4i-usb: add support for the USB PHY on F1C100s SoC   Jernej Škrabec
• [PATCH v2 05/10] musb: sunxi: add support for the F1C100s MUSB controller   Jernej Škrabec
• [PATCH v7 1/5] PCI: qcom: Add system suspend and resume support   Bjorn Helgaas
• [PATCH v12 0/4] Add the iMX8MP PCIe support   Hongxing Zhu
• [PATCH RESEND v12 0/4] Add the iMX8MP PCIe support   Richard Zhu
• [RESEND v12 1/4] dt-binding: phy: Add i.MX8MP PCIe PHY binding   Richard Zhu
• [RESEND v12 2/4] phy: freescale: imx8m-pcie: Refine register definitions   Richard Zhu
• [RESEND v12 3/4] phy: freescale: imx8m-pcie: Refine i.MX8MM PCIe PHY driver   Richard Zhu
• [RESEND v12 4/4] phy: freescale: imx8m-pcie: Add i.MX8MP PCIe PHY support   Richard Zhu
• [PATCH v2 04/10] phy: sun4i-usb: add support for the USB PHY on F1C100s SoC   Icenowy Zheng
• [PATCH v2 04/10] phy: sun4i-usb: add support for the USB PHY on F1C100s SoC   Jernej Škrabec
• [PATCH V3 00/21] Enhancements to pcie-tegra194 driver   Vidya Sagar
• [PATCH V3 01/21] PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"   Vidya Sagar
• [PATCH V3 02/21] PCI: tegra194: Drive CLKREQ signal low explicitly   Vidya Sagar
• [PATCH V3 03/21] PCI: tegra194: Fix polling delay for L2 state   Vidya Sagar
• [PATCH V3 04/21] PCI: tegra194: Handle errors in BPMP response   Vidya Sagar
• [PATCH V3 05/21] PCI: tegra194: Apply pinctrl settings for both PCIe RP and EP   Vidya Sagar
• [PATCH V3 06/21] PCI: tegra194: Refactor LTSSM state polling on surprise down   Vidya Sagar
• [PATCH V3 07/21] PCI: tegra194: Disable direct speed change for EP   Vidya Sagar
• [PATCH V3 08/21] phy: tegra: p2u: Set ENABLE_L2_EXIT_RATE_CHANGE in calibration   Vidya Sagar
• [PATCH V3 09/21] PCI: tegra194: Calibrate P2U for endpoint mode   Vidya Sagar
• [PATCH V3 10/21] PCI: tegra194: Free resources during controller deinitialization   Vidya Sagar
• [PATCH V3 11/21] PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration   Vidya Sagar
• [PATCH V3 12/21] PCI: tegra194: Enable DMA interrupt   Vidya Sagar
• [PATCH V3 13/21] PCI: tegra194: Enable hardware hot reset mode in Endpoint   Vidya Sagar
• [PATCH V3 14/21] PCI: tegra194: Allow system suspend when the Endpoint link is not up   Vidya Sagar
• [PATCH V3 15/21] PCI: tegra194: Disable L1.2 capability of Tegra234 EP   Vidya Sagar
• [PATCH V3 16/21] PCI: tegra194: Set LTR message request before PCIe link up   Vidya Sagar
• [PATCH V3 17/21] PCI: tegra194: Reduce AXI slave timeout value   Vidya Sagar
• [PATCH V3 18/21] PCI: tegra194: Don't force the device into the D0 state before L2   Vidya Sagar
• [PATCH V3 19/21] PCI: tegra194: Free up EP resources during remove()   Vidya Sagar
• [PATCH V3 20/21] dt-bindings: PCI: tegra194: Add monitor clock support   Vidya Sagar
• [PATCH V3 21/21] PCI: tegra194: Add core monitor clock support   Vidya Sagar
• [PATCH v2 04/10] phy: sun4i-usb: add support for the USB PHY on F1C100s SoC   Icenowy Zheng
• [PATCH] phy: stm32: fix an error code in probe   Dan Carpenter
• [PATCH] dt-bindings: phy: imx8mq-usb: add power-domains property   Peng Fan (OSS)
• [PATCH] phy: stm32: fix an error code in probe   Amelie Delaunay
• [PATCH] dt-bindings: phy: imx8mq-usb: add power-domains property   Alexander Stein
• [PATCH v1 11/17] drm/mediatek: hdmi: add mt8195 support   Guillaume Ranquet
• [PATCH] dt-bindings: phy: imx8mq-usb: add power-domains property   Rob Herring
• [PATCH v2 00/12] Add MT8195 HDMI support   Guillaume Ranquet
• [PATCH v2 01/12] dt-bindings: phy: mediatek: hdmi-phy: Add mt8195 compatible   Guillaume Ranquet
• [PATCH v2 02/12] dt-bindings: display: mediatek: add MT8195 hdmi bindings   Guillaume Ranquet
• [PATCH v2 03/12] drm/mediatek: hdmi: use a regmap instead of iomem   Guillaume Ranquet
• [PATCH v2 04/12] drm/mediatek: extract common functions from the mtk hdmi driver   Guillaume Ranquet
• [PATCH v2 05/12] drm/mediatek: hdmi: make the cec dev optional   Guillaume Ranquet
• [PATCH v2 06/12] drm/mediatek: hdmi: add frame_colorimetry flag   Guillaume Ranquet
• [PATCH v2 07/12] drm/mediatek: hdmi: add v2 support   Guillaume Ranquet
• [PATCH v2 08/12] drm/mediatek: hdmi: v2: add audio support   Guillaume Ranquet
• [PATCH v2 09/12] phy: phy-mtk-hdmi: Add generic phy configure callback   Guillaume Ranquet
• [PATCH v2 10/12] phy: mediatek: add support for phy-mtk-hdmi-mt8195   Guillaume Ranquet
• [PATCH v2 11/12] dt-bindings: display: mediatek: dpi: Add compatible for MediaTek MT8195   Guillaume Ranquet
• [PATCH v2 12/12] drm/mediatek: dpi: Add mt8195 hdmi to DPI driver   Guillaume Ranquet
• [PATCH v2 02/12] dt-bindings: display: mediatek: add MT8195 hdmi bindings   Krzysztof Kozlowski
• [PATCH] dt-bindings: Remove "status" from schema examples, again   Rob Herring
• [PATCH] dt-bindings: Remove "status" from schema examples, again   Krzysztof Kozlowski
• [PATCH] dt-bindings: Remove "status" from schema examples, again   Jonathan Cameron
• [PATCH 0/2] phy: ti: phy-j721e-wiz: add j784s4 support   Matt Ranostay
• [PATCH 1/2] dt-bindings: phy-j721e-wiz: add j784s4 compatible string   Matt Ranostay
• [PATCH 2/2] phy: ti: phy-j721e-wiz: add j784s4-wiz-10g module support   Matt Ranostay
• [PATCH 1/2] dt-bindings: phy-j721e-wiz: add j784s4 compatible string   Krzysztof Kozlowski
• [PATCH] dt-bindings: Remove "status" from schema examples, again   Vinod Koul
• [PATCH] phy: stm32: fix an error code in probe   Vinod Koul
• [PATCH] dt-bindings: phy: imx8mq-usb: add power-domains property   Vinod Koul
• [PATCH 0/2] phy: ti: phy-j721e-wiz: add j784s4 support   Vinod Koul
• [PATCH RESEND v12 0/4] Add the iMX8MP PCIe support   Vinod Koul
• [PATCH] phy: tegra: xusb: Fix crash during pad power on/down   Vinod Koul
• [PATCH] phy: marvell: phy-mvebu-a3700-comphy: Reset COMPHY registers before USB 3.0 power on   Vinod Koul
• Patch "phy: qcom-qmp-combo: disable runtime PM on unbind" has been added to the 5.15-stable tree   Johan Hovold
• [PATCH v3 00/11] phy: qcom-qmp: more fixes and cleanups (set 1)   Johan Hovold
• [PATCH v3 01/11] phy: qcom-qmp: fix obsolete lane comments   Johan Hovold
• [PATCH v3 02/11] phy: qcom-qmp-combo: drop unused UFS reset   Johan Hovold
• [PATCH v3 03/11] phy: qcom-qmp-pcie: drop unused common-block registers   Johan Hovold
• [PATCH v3 04/11] phy: qcom-qmp-pcie: clean up power-down handling   Johan Hovold
• [PATCH v3 05/11] phy: qcom-qmp-pcie: move power-down update   Johan Hovold
• [PATCH v3 06/11] phy: qcom-qmp-pcie-msm8996: clean up power-down handling   Johan Hovold
• [PATCH v3 07/11] phy: qcom-qmp-combo: clean up power-down handling   Johan Hovold
• [PATCH v3 08/11] phy: qcom-qmp-ufs: clean up power-down handling   Johan Hovold
• [PATCH v3 09/11] phy: qcom-qmp-usb: clean up power-down handling   Johan Hovold
• [PATCH v3 10/11] phy: qcom-qmp-pcie: clean up clock lists   Johan Hovold
• [PATCH v3 11/11] phy: qcom-qmp-pcie: drop bogus register update   Johan Hovold
• [PATCH 08/20] phy: qcom-qmp-combo: clean up status polling   Johan Hovold
• [PATCH] dt-bindings: Remove "status" from schema examples, again   Nicolas Ferre
• [PATCH v6 0/5] PCI: qcom: Support using the same PHY for both RC and EP   Vinod Koul
• [PATCH v3 00/11] phy: qcom-qmp: more fixes and cleanups (set 1)   Vinod Koul
• [PATCH] dt-bindings: Remove "status" from schema examples, again   Thierry Reding
• [PATCH 00/15] phy: qcom-qmp-pcie: add support for sc8280xp   Johan Hovold
• [PATCH 01/15] phy: qcom-qmp-pcie: sort device-id table   Johan Hovold
• [PATCH 02/15] phy: qcom-qmp-pcie: move device-id table   Johan Hovold
• [PATCH 03/15] phy: qcom-qmp-pcie: merge driver data   Johan Hovold
• [PATCH 04/15] phy: qcom-qmp-pcie: clean up device-tree parsing   Johan Hovold
• [PATCH 05/15] phy: qcom-qmp-pcie: clean up probe initialisation   Johan Hovold
• [PATCH 06/15] phy: qcom-qmp-pcie: rename PHY ops structure   Johan Hovold
• [PATCH 07/15] phy: qcom-qmp-pcie: clean up PHY lane init   Johan Hovold
• [PATCH 08/15] phy: qcom-qmp-pcie: add register init helper   Johan Hovold
• [PATCH 09/15] dt-bindings: phy: qcom,qmp-pcie: mark current bindings as legacy   Johan Hovold
• [PATCH 10/15] dt-bindings: phy: qcom,qmp-pcie: add sc8280xp bindings   Johan Hovold
• [PATCH 11/15] phy: qcom-qmp-pcie: restructure PHY creation   Johan Hovold
• [PATCH 12/15] phy: qcom-qmp-pcie: fix initialisation reset   Johan Hovold
• [PATCH 13/15] phy: qcom-qmp-pcie: add support for pipediv2 clock   Johan Hovold
• [PATCH 14/15] phy: qcom-qmp-pcie: add support for sc8280xp   Johan Hovold
• [PATCH 15/15] phy: qcom-qmp-pcie: add support for sc8280xp 4-lane PHYs   Johan Hovold
• [PATCH 09/15] dt-bindings: phy: qcom,qmp-pcie: mark current bindings as legacy   Krzysztof Kozlowski
• [PATCH 10/15] dt-bindings: phy: qcom,qmp-pcie: add sc8280xp bindings   Krzysztof Kozlowski
• (subset) [PATCH v13 0/3] Add QCOM SNPS PHY overriding params support   Bjorn Andersson
• [PATCH 09/15] dt-bindings: phy: qcom,qmp-pcie: mark current bindings as legacy   Johan Hovold
• [PATCH] phy/rockchip: Remove the unused function hw_to_inno   Jiapeng Chong
• [PATCH v2 0/3] Add support to PHY GMII SEL for J721e CPSW9G QSGMII   Siddharth Vadapalli
• [PATCH v2 1/3] dt-bindings: phy: ti: phy-gmii-sel: Add bindings for J721e   Siddharth Vadapalli
• [PATCH v2 2/3] phy: ti: gmii-sel: Update methods for fetching and using qsgmii main port   Siddharth Vadapalli
• [PATCH v2 3/3] phy: ti: gmii-sel: Add support for CPSW9G GMII SEL in J721e   Siddharth Vadapalli
• [PATCH 10/15] dt-bindings: phy: qcom,qmp-pcie: add sc8280xp bindings   Johan Hovold
• [PATCH 09/15] dt-bindings: phy: qcom,qmp-pcie: mark current bindings as legacy   Dmitry Baryshkov
• [PATCH 09/15] dt-bindings: phy: qcom,qmp-pcie: mark current bindings as legacy   Johan Hovold
• [PATCH 09/15] dt-bindings: phy: qcom,qmp-pcie: mark current bindings as legacy   Dmitry Baryshkov
• [PATCH 09/15] dt-bindings: phy: qcom,qmp-pcie: mark current bindings as legacy   Johan Hovold
• [PATCH 13/15] phy: qcom-qmp-pcie: add support for pipediv2 clock   Dmitry Baryshkov
• [PATCH v2 1/3] dt-bindings: phy: ti: phy-gmii-sel: Add bindings for J721e   Rob Herring
• [PATCH 13/15] phy: qcom-qmp-pcie: add support for pipediv2 clock   Johan Hovold
• [PATCH 10/15] dt-bindings: phy: qcom,qmp-pcie: add sc8280xp bindings   Krzysztof Kozlowski
• [PATCH 09/15] dt-bindings: phy: qcom,qmp-pcie: mark current bindings as legacy   Krzysztof Kozlowski
• [PATCH 09/15] dt-bindings: phy: qcom,qmp-pcie: mark current bindings as legacy   Krzysztof Kozlowski
• [PATCH 10/15] dt-bindings: phy: qcom,qmp-pcie: add sc8280xp bindings   Johan Hovold
• [PATCH 09/15] dt-bindings: phy: qcom,qmp-pcie: mark current bindings as legacy   Johan Hovold
• [PATCH 09/15] dt-bindings: phy: qcom,qmp-pcie: mark current bindings as legacy   Johan Hovold
• [PATCH 09/15] dt-bindings: phy: qcom,qmp-pcie: mark current bindings as legacy   Krzysztof Kozlowski
• [PATCH] doc: phy: Document typical order of API calls   Sean Anderson
• [PATCH] doc: phy: Document typical order of API calls   Sean Anderson
• [PATCH v7 0/8] phy: Add support for Lynx 10G SerDes   Sean Anderson
• [PATCH v7 1/8] dt-bindings: phy: Add 2500BASE-X and 10GBASE-R   Sean Anderson
• [PATCH v7 2/8] dt-bindings: phy: Add Lynx 10G phy binding   Sean Anderson
• [PATCH v7 3/8] dt-bindings: clock: Add ids for Lynx 10g PLLs   Sean Anderson
• [PATCH v7 4/8] phy: fsl: Add Lynx 10G SerDes driver   Sean Anderson
• [PATCH v7 5/8] arm64: dts: ls1046a: Add serdes bindings   Sean Anderson
• [PATCH v7 6/8] arm64: dts: ls1088a: Add serdes bindings   Sean Anderson
• [PATCH v7 7/8] arm64: dts: ls1046ardb: Add serdes bindings   Sean Anderson
• [PATCH v7 8/8] [WIP] arm64: dts: ls1088ardb: Add serdes bindings   Sean Anderson
• [PATCH v2 1/3] dt-bindings: phy: ti: phy-gmii-sel: Add bindings for J721e   Siddharth Vadapalli
• [PATCH v7 4/8] phy: fsl: Add Lynx 10G SerDes driver   kernel test robot
• [PATCH] doc: phy: Document typical order of API calls   Vinod Koul
• [PATCH 09/15] dt-bindings: phy: qcom,qmp-pcie: mark current bindings as legacy   Johan Hovold
• [PATCH v2 00/15] phy: qcom-qmp-pcie: add support for sc8280xp   Johan Hovold
• [PATCH v2 01/15] phy: qcom-qmp-pcie: sort device-id table   Johan Hovold
• [PATCH v2 02/15] phy: qcom-qmp-pcie: move device-id table   Johan Hovold
• [PATCH v2 03/15] phy: qcom-qmp-pcie: merge driver data   Johan Hovold
• [PATCH v2 04/15] phy: qcom-qmp-pcie: clean up device-tree parsing   Johan Hovold
• [PATCH v2 05/15] phy: qcom-qmp-pcie: clean up probe initialisation   Johan Hovold
• [PATCH v2 06/15] phy: qcom-qmp-pcie: rename PHY ops structure   Johan Hovold
• [PATCH v2 07/15] phy: qcom-qmp-pcie: clean up PHY lane init   Johan Hovold
• [PATCH v2 08/15] phy: qcom-qmp-pcie: add register init helper   Johan Hovold
• [PATCH v2 09/15] dt-bindings: phy: qcom,qmp-pcie: rename current bindings   Johan Hovold
• [PATCH v2 10/15] dt-bindings: phy: qcom,qmp-pcie: add sc8280xp bindings   Johan Hovold
• [PATCH v2 11/15] phy: qcom-qmp-pcie: restructure PHY creation   Johan Hovold
• [PATCH v2 12/15] phy: qcom-qmp-pcie: fix initialisation reset   Johan Hovold
• [PATCH v2 13/15] phy: qcom-qmp-pcie: add support for pipediv2 clock   Johan Hovold
• [PATCH v2 14/15] phy: qcom-qmp-pcie: add support for sc8280xp   Johan Hovold
• [PATCH v2 15/15] phy: qcom-qmp-pcie: add support for sc8280xp 4-lane PHYs   Johan Hovold
• [PATCH v2 01/15] phy: qcom-qmp-pcie: sort device-id table   Dmitry Baryshkov
• [PATCH v2 02/15] phy: qcom-qmp-pcie: move device-id table   Dmitry Baryshkov
• [PATCH v2 09/15] dt-bindings: phy: qcom,qmp-pcie: rename current bindings   Krzysztof Kozlowski
• [PATCH v2 10/15] dt-bindings: phy: qcom,qmp-pcie: add sc8280xp bindings   Krzysztof Kozlowski
• [PATCH v2 03/15] phy: qcom-qmp-pcie: merge driver data   Dmitry Baryshkov
• [PATCH v2 05/15] phy: qcom-qmp-pcie: clean up probe initialisation   Dmitry Baryshkov
• [PATCH v2 06/15] phy: qcom-qmp-pcie: rename PHY ops structure   Dmitry Baryshkov
• [PATCH v2 08/15] phy: qcom-qmp-pcie: add register init helper   Dmitry Baryshkov
• [PATCH v2 08/15] phy: qcom-qmp-pcie: add register init helper   Johan Hovold
• [PATCH v2 08/15] phy: qcom-qmp-pcie: add register init helper   Dmitry Baryshkov
• [PATCH v2 07/15] phy: qcom-qmp-pcie: clean up PHY lane init   Dmitry Baryshkov
• [PATCH v2 11/15] phy: qcom-qmp-pcie: restructure PHY creation   Dmitry Baryshkov
• [PATCH v2 08/15] phy: qcom-qmp-pcie: add register init helper   Johan Hovold
• [PATCH v2 12/15] phy: qcom-qmp-pcie: fix initialisation reset   Dmitry Baryshkov
• [PATCH v2 12/15] phy: qcom-qmp-pcie: fix initialisation reset   Dmitry Baryshkov
• [PATCH 1/2] phy: phy-mtk-tphy: Add PCIe 2 lane efuse support   Daniel Golle
• [PATCH 2/2] dt-bindings: phy: mediatek: tphy: add compatible for tphy-v4   Daniel Golle
• [PATCH v7 0/8] phy: Add support for Lynx 10G SerDes   Bagas Sanjaya
• [PATCH] doc: phy: Document typical order of API calls   Bagas Sanjaya
• [PATCH v2 15/15] phy: qcom-qmp-pcie: add support for sc8280xp 4-lane PHYs   Dmitry Baryshkov
• [PATCH v2 15/15] phy: qcom-qmp-pcie: add support for sc8280xp 4-lane PHYs   Johan Hovold
• [PATCH v2 13/15] phy: qcom-qmp-pcie: add support for pipediv2 clock   Dmitry Baryshkov
• [PATCH v2 13/15] phy: qcom-qmp-pcie: add support for pipediv2 clock   Johan Hovold
• [PATCH v2 13/15] phy: qcom-qmp-pcie: add support for pipediv2 clock   Dmitry Baryshkov
• [PATCH v2 15/15] phy: qcom-qmp-pcie: add support for sc8280xp 4-lane PHYs   Dmitry Baryshkov
• [PATCH v2 13/15] phy: qcom-qmp-pcie: add support for pipediv2 clock   Johan Hovold
• [PATCH v2 13/15] phy: qcom-qmp-pcie: add support for pipediv2 clock   Dmitry Baryshkov
• [PATCH v2 15/15] phy: qcom-qmp-pcie: add support for sc8280xp 4-lane PHYs   Johan Hovold
• [PATCH] dt-bindings: Remove "status" from schema examples, again   Rob Herring
• [PATCH v7 0/8] phy: Add support for Lynx 10G SerDes   Sean Anderson
• [PATCH v7 4/8] phy: fsl: Add Lynx 10G SerDes driver   kernel test robot
• [PATCH v2 2/2] phy: renesas: Add Renesas Ethernet SERDES driver for R-Car S4-8   kernel test robot
• [PATCH v2 1/2] dt-bindings: phy: renesas: Document Renesas Ethernet SERDES   Krzysztof Kozlowski
• [PATCH v2 1/2] dt-bindings: phy: renesas: Document Renesas Ethernet SERDES   Yoshihiro Shimoda
• [PATCH 2/2] dt-bindings: phy: mediatek: tphy: add compatible for tphy-v4   Rob Herring
• [PATCH 1/2] phy: phy-mtk-tphy: Add PCIe 2 lane efuse support   Sam Shih
• [PATCH] phy: tegra: xusb: Remove usb3 supply   Haotien Hsu
• [PATCH 1/2] phy: phy-mtk-tphy: Add PCIe 2 lane efuse support   Chunfeng Yun
• [PATCH 2/2] dt-bindings: phy: mediatek: tphy: add compatible for tphy-v4   Chunfeng Yun
• [PATCH v2 10/12] phy: mediatek: add support for phy-mtk-hdmi-mt8195   Chunfeng Yun
• [PATCH v2 12/15] phy: qcom-qmp-pcie: fix initialisation reset   Johan Hovold
• [PATCH v3 00/15] phy: qcom-qmp-pcie: add support for sc8280xp   Johan Hovold
• [PATCH v3 01/15] phy: qcom-qmp-pcie: sort device-id table   Johan Hovold
• [PATCH v3 02/15] phy: qcom-qmp-pcie: move device-id table   Johan Hovold
• [PATCH v3 03/15] phy: qcom-qmp-pcie: merge driver data   Johan Hovold
• [PATCH v3 04/15] phy: qcom-qmp-pcie: clean up device-tree parsing   Johan Hovold
• [PATCH v3 05/15] phy: qcom-qmp-pcie: clean up probe initialisation   Johan Hovold
• [PATCH v3 06/15] phy: qcom-qmp-pcie: rename PHY ops structure   Johan Hovold
• [PATCH v3 07/15] phy: qcom-qmp-pcie: clean up PHY lane init   Johan Hovold
• [PATCH v3 08/15] phy: qcom-qmp-pcie: add register init helper   Johan Hovold
• [PATCH v3 09/15] dt-bindings: phy: qcom,qmp-pcie: rename current bindings   Johan Hovold
• [PATCH v3 10/15] dt-bindings: phy: qcom,qmp-pcie: add sc8280xp bindings   Johan Hovold
• [PATCH v3 11/15] phy: qcom-qmp-pcie: restructure PHY creation   Johan Hovold
• [PATCH v3 12/15] phy: qcom-qmp-pcie: fix initialisation reset   Johan Hovold
• [PATCH v3 13/15] phy: qcom-qmp-pcie: add support for pipediv2 clock   Johan Hovold
• [PATCH v3 14/15] phy: qcom-qmp-pcie: add support for sc8280xp   Johan Hovold
• [PATCH v3 15/15] phy: qcom-qmp-pcie: add support for sc8280xp 4-lane PHYs   Johan Hovold
• [PATCH v3 13/15] phy: qcom-qmp-pcie: add support for pipediv2 clock   Dmitry Baryshkov
• [PATCH v3 08/15] phy: qcom-qmp-pcie: add register init helper   Dmitry Baryshkov
• [PATCH v3 15/15] phy: qcom-qmp-pcie: add support for sc8280xp 4-lane PHYs   Dmitry Baryshkov
• [PATCH v3 08/15] phy: qcom-qmp-pcie: add register init helper   Johan Hovold
• [PATCH] phy: tegra: xusb: Remove usb3 supply   Jon Hunter
• [PATCH 00/11] Enable USB host and device functions on Jetson   Wayne Chang
• [PATCH 01/11] dt-bindings: usb: tegra-xudc: Add Tegra234 XUSB controller support   Wayne Chang
• [PATCH 02/11] dt-bindings: usb: Add NVIDIA Tegra XUSB host controller binding   Wayne Chang
• [PATCH 03/11] dt-bindings: usb: Add binding for Cypress cypd4226 I2C driver   Wayne Chang
• [PATCH 04/11] arm64: tegra: Enable XUSB host and device on Jetson AGX Orin   Wayne Chang
• [PATCH 05/11] usb: typec: ucsi_ccg: Add OF support   Wayne Chang
• [PATCH 06/11] usb: typec: ucsi_ccg: Replace ccgx to well-known regex   Wayne Chang
• [PATCH 07/11] i2c: nvidia-gpu: Replace ccgx to well-known regex   Wayne Chang
• [PATCH 08/11] phy: tegra: xusb: Disable trk clk when not using   Wayne Chang
• [PATCH 09/11] phy: tegra: xusb: Add Tegra234 support   Wayne Chang
• [PATCH 10/11] usb: host: xhci-tegra: Add Tegra234 XHCI support   Wayne Chang
• [PATCH 11/11] usb: gadget: tegra-xudc: Add Tegra234 support   Wayne Chang
• [PATCH 06/11] usb: typec: ucsi_ccg: Replace ccgx to well-known regex   Heikki Krogerus
• [PATCH 06/11] usb: typec: ucsi_ccg: Replace ccgx to well-known regex   Felipe Balbi
• [PATCH 06/11] usb: typec: ucsi_ccg: Replace ccgx to well-known regex   Heikki Krogerus
• [PATCH 00/10] phy: qcom-qmp-ufs: fix sc8280xp binding   Johan Hovold
• [PATCH 01/10] phy: qcom-qmp-ufs: move device-id table   Johan Hovold
• [PATCH 02/10] phy: qcom-qmp-ufs: merge driver data   Johan Hovold
• [PATCH 03/10] phy: qcom-qmp-ufs: clean up device-tree parsing   Johan Hovold
• [PATCH 04/10] phy: qcom-qmp-ufs: clean up probe initialisation   Johan Hovold
• [PATCH 05/10] phy: qcom-qmp-ufs: rename PHY ops structure   Johan Hovold
• [PATCH 06/10] phy: qcom-qmp-ufs: clean up PHY init   Johan Hovold
• [PATCH 07/10] dt-bindings: phy: qcom,qmp-ufs: rename current bindings   Johan Hovold
• [PATCH 08/10] dt-bindings: phy: qcom,qmp-ufs: fix sc8280xp binding   Johan Hovold
• [PATCH 09/10] phy: qcom-qmp-ufs: restructure PHY creation   Johan Hovold
• [PATCH 10/10] phy: qcom-qmp-ufs: add support for updated sc8280xp binding   Johan Hovold
• [PATCH 00/13] phy: qcom-qmp-usb: fix sc8280xp binding   Johan Hovold
• [PATCH 01/13] phy: qcom-qmp-usb: fix sc8280xp PCS_USB offset   Johan Hovold
• [PATCH 02/13] phy: qcom-qmp-usb: sort device-id table   Johan Hovold
• [PATCH 03/13] phy: qcom-qmp-usb: move device-id table   Johan Hovold
• [PATCH 04/13] phy: qcom-qmp-usb: move pm ops   Johan Hovold
• [PATCH 05/13] phy: qcom-qmp-usb: merge driver data   Johan Hovold
• [PATCH 06/13] phy: qcom-qmp-usb: clean up device-tree parsing   Johan Hovold
• [PATCH 07/13] phy: qcom-qmp-usb: clean up probe initialisation   Johan Hovold
• [PATCH 08/13] phy: qcom-qmp-usb: rename PHY ops structure   Johan Hovold
• [PATCH 09/13] phy: qcom-qmp-usb: clean up PHY init   Johan Hovold
• [PATCH 10/13] dt-bindings: phy: qcom,qmp-usb: rename current bindings   Johan Hovold
• [PATCH 11/13] dt-bindings: phy: qcom,qmp-usb: fix sc8280xp binding   Johan Hovold
• [PATCH 12/13] phy: qcom-qmp-usb: restructure PHY creation   Johan Hovold
• [PATCH 13/13] phy: qcom-qmp-usb: add support for updated sc8280xp binding   Johan Hovold
• [PATCH 01/10] phy: qcom-qmp-ufs: move device-id table   Dmitry Baryshkov
• [PATCH 02/11] dt-bindings: usb: Add NVIDIA Tegra XUSB host controller binding   Rob Herring
• [PATCH 02/10] phy: qcom-qmp-ufs: merge driver data   Dmitry Baryshkov
• [PATCH 03/10] phy: qcom-qmp-ufs: clean up device-tree parsing   Dmitry Baryshkov
• [PATCH 04/10] phy: qcom-qmp-ufs: clean up probe initialisation   Dmitry Baryshkov
• [PATCH 05/10] phy: qcom-qmp-ufs: rename PHY ops structure   Dmitry Baryshkov
• [PATCH 06/10] phy: qcom-qmp-ufs: clean up PHY init   Dmitry Baryshkov
• [PATCH 09/10] phy: qcom-qmp-ufs: restructure PHY creation   Dmitry Baryshkov
• [PATCH 10/10] phy: qcom-qmp-ufs: add support for updated sc8280xp binding   Dmitry Baryshkov
• [PATCH 01/13] phy: qcom-qmp-usb: fix sc8280xp PCS_USB offset   Dmitry Baryshkov
• [PATCH 02/13] phy: qcom-qmp-usb: sort device-id table   Dmitry Baryshkov
• [PATCH 03/13] phy: qcom-qmp-usb: move device-id table   Dmitry Baryshkov
• [PATCH 04/13] phy: qcom-qmp-usb: move pm ops   Dmitry Baryshkov
• [PATCH 05/13] phy: qcom-qmp-usb: merge driver data   Dmitry Baryshkov
• [PATCH 06/13] phy: qcom-qmp-usb: clean up device-tree parsing   Dmitry Baryshkov
• [PATCH 07/13] phy: qcom-qmp-usb: clean up probe initialisation   Dmitry Baryshkov
• [PATCH 08/13] phy: qcom-qmp-usb: rename PHY ops structure   Dmitry Baryshkov
• [PATCH 09/13] phy: qcom-qmp-usb: clean up PHY init   Dmitry Baryshkov
• [PATCH 12/13] phy: qcom-qmp-usb: restructure PHY creation   Dmitry Baryshkov
• [PATCH 13/13] phy: qcom-qmp-usb: add support for updated sc8280xp binding   Dmitry Baryshkov
• [PATCH 13/13] phy: qcom-qmp-usb: add support for updated sc8280xp binding   Johan Hovold
• [PATCH 00/10] phy: qcom-qmp-ufs: fix sc8280xp binding   Dmitry Baryshkov
• [PATCH v2 06/10] ARM: suniv: add USB-related device nodes   Andre Przywara
• [PATCH v2 02/10] dt-bindings: phy: add binding document for Allwinner F1C100s USB PHY   Andre Przywara
• [PATCH v2 09/10] dt-binding: arm: sunxi: add compatible strings for PopStick v1.1   Andre Przywara
• [PATCH v2 09/10] dt-binding: arm: sunxi: add compatible strings for PopStick v1.1   Icenowy Zheng
• [PATCH 02/11] dt-bindings: usb: Add NVIDIA Tegra XUSB host controller binding   Rob Herring
• [PATCH v2 10/10] ARM: dts: suniv: add device tree for PopStick v1.1   Andre Przywara
• [PATCH v2 06/10] ARM: suniv: add USB-related device nodes   Icenowy Zheng
• [PATCH 02/11] dt-bindings: usb: Add NVIDIA Tegra XUSB host controller binding   Jon Hunter
• [PATCH RESEND v3 1/2] phy: core: add debugfs root   Chunfeng Yun
• [PATCH RESEND v3 2/2] phy: mediatek: tphy: add debugfs files   Chunfeng Yun
• [PATCH 06/11] usb: typec: ucsi_ccg: Replace ccgx to well-known regex   Wayne Chang
• [PATCH 02/11] dt-bindings: usb: Add NVIDIA Tegra XUSB host controller binding   Wayne Chang
• [PATCH 01/11] dt-bindings: usb: tegra-xudc: Add Tegra234 XUSB controller support   Rob Herring
• [PATCH 03/11] dt-bindings: usb: Add binding for Cypress cypd4226 I2C driver   Rob Herring
• [PATCH 03/11] dt-bindings: usb: Add binding for Cypress cypd4226 I2C driver   Jon Hunter
• [PATCH v3 0/3] Add support to PHY GMII SEL for J721e CPSW9G QSGMII   Siddharth Vadapalli
• [PATCH v3 1/3] dt-bindings: phy: ti: phy-gmii-sel: Add bindings for J721e   Siddharth Vadapalli
• [PATCH v3 2/3] phy: ti: gmii-sel: Update methods for fetching and using qsgmii main port   Siddharth Vadapalli
• [PATCH v3 3/3] phy: ti: gmii-sel: Add support for CPSW9G GMII SEL in J721e   Siddharth Vadapalli
• [PATCH] phy: qcom-qmp-pcie: Fix the SM8450 PCS registers   Manivannan Sadhasivam
• [PATCH] phy: qcom-qmp-combo: fix NULL-deref on runtime resume   Johan Hovold
• [PATCH] phy: qcom-qmp-pcie: Fix the SM8450 PCS registers   Dmitry Baryshkov
• [PATCH] phy: qcom-qmp-combo: fix NULL-deref on runtime resume   Andrew Halaney
• [PATCH] phy: qcom-qmp-combo: fix NULL-deref on runtime resume   Dmitry Baryshkov
• [PATCH v3 1/3] dt-bindings: phy: ti: phy-gmii-sel: Add bindings for J721e   Rob Herring
• [PATCH] phy: phy-brcm-usb: Utilize platform_get_irq_byname_optional()   Florian Fainelli
• [PATCH 0/2] dt-bindings: phy: Fix UniPhier controller node names   Kunihiko Hayashi
• [PATCH 1/2] dt-bindings: phy: Fix UniPhier USB3 controller node names in example   Kunihiko Hayashi
• [PATCH 2/2] dt-bindings: phy: Fix UniPhier SATA controller node names in example   Kunihiko Hayashi
• [PATCH v3 0/2] phy: renesas: Add Renesas Ethernet SERDES driver for R-Car S4-8   Yoshihiro Shimoda
• [PATCH v3 1/2] dt-bindings: phy: renesas: Document Renesas Ethernet SERDES   Yoshihiro Shimoda
• [PATCH v3 2/2] phy: renesas: Add Renesas Ethernet SERDES driver for R-Car S4-8   Yoshihiro Shimoda
• [PATCH v3 0/2] phy: renesas: Add Renesas Ethernet SERDES driver for R-Car S4-8   Yoshihiro Shimoda
• [RESEND PATCH v3 0/2] phy: renesas: Add Renesas Ethernet SERDES driver for R-Car S4-8   Yoshihiro Shimoda
• [RESEND PATCH v3 1/2] dt-bindings: phy: renesas: Document Renesas Ethernet SERDES   Yoshihiro Shimoda
• [RESEND PATCH v3 2/2] phy: renesas: Add Renesas Ethernet SERDES driver for R-Car S4-8   Yoshihiro Shimoda
• [PATCH] phy: phy-brcm-usb: Utilize platform_get_irq_byname_optional()   Justin Chen
• [PATCH v8 0/9] phy: Add support for Lynx 10G SerDes   Sean Anderson
• [PATCH v8 1/9] dt-bindings: phy: Add 2500BASE-X and 10GBASE-R   Sean Anderson
• [PATCH v8 2/9] dt-bindings: phy: Add Lynx 10G phy binding   Sean Anderson
• [PATCH v8 3/9] dt-bindings: clock: Add ids for Lynx 10g PLLs   Sean Anderson
• [PATCH v8 4/9] phy: fsl: Add Lynx 10G SerDes driver   Sean Anderson
• [PATCH v8 5/9] arm64: dts: ls1046a: Add serdes bindings   Sean Anderson
• [PATCH v8 6/9] arm64: dts: ls1046ardb: Add serdes bindings   Sean Anderson
• [PATCH v8 7/9] arm64: dts: ls1088a: Add serdes bindings   Sean Anderson
• [PATCH v8 8/9] arm64: dts: ls1088a: Prevent PCSs from probing as phys   Sean Anderson
• [PATCH v8 9/9] [DO NOT MERGE] arm64: dts: ls1088ardb: Add serdes bindings   Sean Anderson
• [PATCH v7 3/8] dt-bindings: clock: Add ids for Lynx 10g PLLs   Stephen Boyd
• [PATCH v8 3/9] dt-bindings: clock: Add ids for Lynx 10g PLLs   Stephen Boyd
• [PATCH v8 3/9] dt-bindings: clock: Add ids for Lynx 10g PLLs   Sean Anderson
• [PATCH v8 4/9] phy: fsl: Add Lynx 10G SerDes driver   Stephen Boyd
• [PATCH v3 1/2] dt-bindings: phy: renesas: Document Renesas Ethernet SERDES   Krzysztof Kozlowski
• [RESEND PATCH v3 1/2] dt-bindings: phy: renesas: Document Renesas Ethernet SERDES   Krzysztof Kozlowski
• [PATCH 07/10] dt-bindings: phy: qcom,qmp-ufs: rename current bindings   Krzysztof Kozlowski
• [PATCH 08/10] dt-bindings: phy: qcom,qmp-ufs: fix sc8280xp binding   Krzysztof Kozlowski
• [PATCH 10/13] dt-bindings: phy: qcom,qmp-usb: rename current bindings   Krzysztof Kozlowski
• [PATCH 11/13] dt-bindings: phy: qcom,qmp-usb: fix sc8280xp binding   Krzysztof Kozlowski
• [PATCH 02/11] dt-bindings: usb: Add NVIDIA Tegra XUSB host controller binding   Krzysztof Kozlowski
• [PATCH 04/11] arm64: tegra: Enable XUSB host and device on Jetson AGX Orin   Krzysztof Kozlowski
• [PATCH 11/13] dt-bindings: phy: qcom,qmp-usb: fix sc8280xp binding   Johan Hovold
• [PATCH 11/13] dt-bindings: phy: qcom,qmp-usb: fix sc8280xp binding   Johan Hovold
• [PATCH 02/11] dt-bindings: usb: Add NVIDIA Tegra XUSB host controller binding   Jon Hunter
• [PATCH 04/11] arm64: tegra: Enable XUSB host and device on Jetson AGX Orin   Jon Hunter
• [PATCH v3 2/3] phy: ti: gmii-sel: Update methods for fetching and using qsgmii main port   Roger Quadros
• [PATCH v3 3/3] phy: ti: gmii-sel: Add support for CPSW9G GMII SEL in J721e   Roger Quadros
• [PATCH v3 2/3] phy: ti: gmii-sel: Update methods for fetching and using qsgmii main port   Siddharth Vadapalli
• [PATCH v3 2/3] phy: ti: gmii-sel: Update methods for fetching and using qsgmii main port   Roger Quadros
• [PATCH 02/11] dt-bindings: usb: Add NVIDIA Tegra XUSB host controller binding   Jon Hunter
• [PATCH 04/11] arm64: tegra: Enable XUSB host and device on Jetson AGX Orin   Krzysztof Kozlowski
• [PATCH 02/11] dt-bindings: usb: Add NVIDIA Tegra XUSB host controller binding   Thierry Reding
• [PATCH 04/11] arm64: tegra: Enable XUSB host and device on Jetson AGX Orin   Jon Hunter
• [PATCH V3 08/21] phy: tegra: p2u: Set ENABLE_L2_EXIT_RATE_CHANGE in calibration   Vinod Koul
• [PATCH V3 08/21] phy: tegra: p2u: Set ENABLE_L2_EXIT_RATE_CHANGE in calibration   Vidya Sagar
• [PATCH v2 00/14] phy: qcom-qmp: further prep cleanups   Vinod Koul
• [PATCH V3 08/21] phy: tegra: p2u: Set ENABLE_L2_EXIT_RATE_CHANGE in calibration   Vinod Koul
• [PATCH 16/20] phy: qcom-qmp-pcie: drop start-ctrl abstraction   Vinod Koul
• [PATCH 00/20] phy: qcom-qmp: further prep fixes and cleanups (set 3)   Vinod Koul
• [PATCH 03/11] dt-bindings: usb: Add binding for Cypress cypd4226 I2C driver   Thierry Reding
• [PATCH 04/11] arm64: tegra: Enable XUSB host and device on Jetson AGX Orin   Thierry Reding
• [PATCH] phy: qcom-qmp-usb: correct registers layout for IPQ8074 USB3 PHY   Vinod Koul
• [PATCH 03/11] dt-bindings: usb: Add binding for Cypress cypd4226 I2C driver   Jon Hunter
• [PATCH v4 3/3] phy: qcom-qmp-ufs: provide symbol clocks   Vinod Koul
• [PATCH v4 3/3] phy: qcom-qmp-ufs: provide symbol clocks   Vinod Koul
• [PATCH v5] phy: qcom-qmp-ufs: provide symbol clocks   Dmitry Baryshkov
• [PATCH v3 08/15] phy: qcom-qmp-pcie: add register init helper   Vinod Koul
• [PATCH] phy: qcom-qmp-combo: fix NULL-deref on runtime resume   Vinod Koul
• [PATCH 09/11] phy: tegra: xusb: Add Tegra234 support   Thierry Reding
• [PATCH 00/10] phy: qcom-qmp-ufs: fix sc8280xp binding   Vinod Koul
• [PATCH 11/13] dt-bindings: phy: qcom,qmp-usb: fix sc8280xp binding   Vinod Koul
• [PATCH v3 08/15] phy: qcom-qmp-pcie: add register init helper   Johan Hovold
• [PATCH v5] phy: qcom-qmp-ufs: provide symbol clocks   Vinod Koul
• [PATCH v3 08/15] phy: qcom-qmp-pcie: add register init helper   Vinod Koul
• [PATCH v4 00/16] phy: qcom-qmp-pcie: add support for sc8280xp   Johan Hovold
• [PATCH v4 01/16] phy: qcom-qmp-pcie: sort device-id table   Johan Hovold
• [PATCH v4 02/16] phy: qcom-qmp-pcie: move device-id table   Johan Hovold
• [PATCH v4 03/16] phy: qcom-qmp-pcie: merge driver data   Johan Hovold
• [PATCH v4 04/16] phy: qcom-qmp-pcie: clean up device-tree parsing   Johan Hovold
• [PATCH v4 05/16] phy: qcom-qmp-pcie: clean up probe initialisation   Johan Hovold
• [PATCH v4 06/16] phy: qcom-qmp-pcie: rename PHY ops structure   Johan Hovold
• [PATCH v4 07/16] phy: qcom-qmp-pcie: clean up PHY lane init   Johan Hovold
• [PATCH v4 08/16] phy: qcom-qmp-pcie: use shorter tables identifier   Johan Hovold
• [PATCH v4 09/16] phy: qcom-qmp-pcie: add register init helper   Johan Hovold
• [PATCH v4 10/16] dt-bindings: phy: qcom,qmp-pcie: rename current bindings   Johan Hovold
• [PATCH v4 11/16] dt-bindings: phy: qcom,qmp-pcie: add sc8280xp bindings   Johan Hovold
• [PATCH v4 12/16] phy: qcom-qmp-pcie: restructure PHY creation   Johan Hovold
• [PATCH v4 13/16] phy: qcom-qmp-pcie: fix initialisation reset   Johan Hovold
• [PATCH v4 14/16] phy: qcom-qmp-pcie: add support for pipediv2 clock   Johan Hovold
• [PATCH v4 15/16] phy: qcom-qmp-pcie: add support for sc8280xp   Johan Hovold
• [PATCH v4 16/16] phy: qcom-qmp-pcie: add support for sc8280xp 4-lane PHYs   Johan Hovold
• [PATCH 10/11] usb: host: xhci-tegra: Add Tegra234 XHCI support   Thierry Reding
• [PATCH v5] phy: qcom-qmp-ufs: provide symbol clocks   Bjorn Andersson
• [PATCH v4 0/4] Add support for Toshiba TC358746   Marco Felsch
• [PATCH v2 00/13] phy: qcom-qmp-usb: fix sc8280xp binding   Johan Hovold
• [PATCH v2 01/13] phy: qcom-qmp-usb: fix sc8280xp PCS_USB offset   Johan Hovold
• [PATCH v2 02/13] phy: qcom-qmp-usb: sort device-id table   Johan Hovold
• [PATCH v2 03/13] phy: qcom-qmp-usb: move device-id table   Johan Hovold
• [PATCH v2 04/13] phy: qcom-qmp-usb: move pm ops   Johan Hovold
• [PATCH v2 05/13] phy: qcom-qmp-usb: merge driver data   Johan Hovold
• [PATCH v2 06/13] phy: qcom-qmp-usb: clean up device-tree parsing   Johan Hovold
• [PATCH v2 07/13] phy: qcom-qmp-usb: clean up probe initialisation   Johan Hovold
• [PATCH v2 08/13] phy: qcom-qmp-usb: rename PHY ops structure   Johan Hovold
• [PATCH v2 09/13] phy: qcom-qmp-usb: clean up PHY init   Johan Hovold
• [PATCH v2 10/13] dt-bindings: phy: qcom,qmp-usb: rename current bindings   Johan Hovold
• [PATCH v2 11/13] dt-bindings: phy: qcom,qmp-usb: fix sc8280xp binding   Johan Hovold
• [PATCH v2 12/13] phy: qcom-qmp-usb: restructure PHY creation   Johan Hovold
• [PATCH v2 13/13] phy: qcom-qmp-usb: add support for updated sc8280xp binding   Johan Hovold
• [PATCH v2 11/13] dt-bindings: phy: qcom,qmp-usb: fix sc8280xp binding   Rob Herring
• [PATCH 03/11] dt-bindings: usb: Add binding for Cypress cypd4226 I2C driver   Thierry Reding
• [PATCH v5] phy: qcom-qmp-ufs: provide symbol clocks   Dmitry Baryshkov
• [PATCH v4 04/16] phy: qcom-qmp-pcie: clean up device-tree parsing   Dmitry Baryshkov
• [PATCH v4 09/16] phy: qcom-qmp-pcie: add register init helper   Dmitry Baryshkov
• [PATCH v4 15/16] phy: qcom-qmp-pcie: add support for sc8280xp   Dmitry Baryshkov
• [PATCH RESEND v2 00/13] phy: qcom-qmp-usb: fix sc8280xp binding   Johan Hovold
• [PATCH RESEND v2 01/13] phy: qcom-qmp-usb: fix sc8280xp PCS_USB offset   Johan Hovold
• [PATCH RESEND v2 02/13] phy: qcom-qmp-usb: sort device-id table   Johan Hovold
• [PATCH RESEND v2 03/13] phy: qcom-qmp-usb: move device-id table   Johan Hovold
• [PATCH RESEND v2 04/13] phy: qcom-qmp-usb: move pm ops   Johan Hovold
• [PATCH RESEND v2 05/13] phy: qcom-qmp-usb: merge driver data   Johan Hovold
• [PATCH RESEND v2 06/13] phy: qcom-qmp-usb: clean up device-tree parsing   Johan Hovold
• [PATCH RESEND v2 07/13] phy: qcom-qmp-usb: clean up probe initialisation   Johan Hovold
• [PATCH RESEND v2 08/13] phy: qcom-qmp-usb: rename PHY ops structure   Johan Hovold
• [PATCH RESEND v2 09/13] phy: qcom-qmp-usb: clean up PHY init   Johan Hovold
• [PATCH RESEND v2 10/13] dt-bindings: phy: qcom,qmp-usb: rename current bindings   Johan Hovold
• [PATCH RESEND v2 11/13] dt-bindings: phy: qcom,qmp-usb: fix sc8280xp binding   Johan Hovold
• [PATCH RESEND v2 12/13] phy: qcom-qmp-usb: restructure PHY creation   Johan Hovold
• [PATCH RESEND v2 13/13] phy: qcom-qmp-usb: add support for updated sc8280xp binding   Johan Hovold
• [PATCH v2 11/13] dt-bindings: phy: qcom,qmp-usb: fix sc8280xp binding   Johan Hovold
• [PATCH v8 4/9] phy: fsl: Add Lynx 10G SerDes driver   Sean Anderson
• [PATCH v8 4/9] phy: fsl: Add Lynx 10G SerDes driver   Sean Anderson
• [PATCH v6] phy: qcom-qmp-ufs: provide symbol clocks   Dmitry Baryshkov
• [PATCH 1/2] dt-bindings: phy: Fix UniPhier USB3 controller node names in example   Rob Herring
• [PATCH 2/2] dt-bindings: phy: Fix UniPhier SATA controller node names in example   Rob Herring
• [PATCH 04/11] arm64: tegra: Enable XUSB host and device on Jetson AGX Orin   Krzysztof Kozlowski
• [PATCH v4 10/16] dt-bindings: phy: qcom,qmp-pcie: rename current bindings   Krzysztof Kozlowski
• [PATCH RESEND v3 2/2] phy: mediatek: tphy: add debugfs files   kernel test robot
• [PATCH v4 10/16] dt-bindings: phy: qcom,qmp-pcie: rename current bindings   Johan Hovold
• [PATCH v6] phy: qcom-qmp-ufs: provide symbol clocks   Johan Hovold
• [PATCH v8 4/9] phy: fsl: Add Lynx 10G SerDes driver   Bagas Sanjaya
• [PATCH v6] phy: qcom-qmp-ufs: provide symbol clocks   Johan Hovold
• [PATCH 00/15] ufs: qcom: Add HS-G4 support   Manivannan Sadhasivam
• [PATCH 01/15] phy: qcom-qmp-ufs: Move register settings to qmp_phy_cfg_tables struct   Manivannan Sadhasivam
• [PATCH 02/15] phy: qcom-qmp-ufs: Add support for configuring PHY in HS Series B mode   Manivannan Sadhasivam
• [PATCH 03/15] phy: qcom-qmp-ufs: Add support for configuring PHY in HS G4 mode   Manivannan Sadhasivam
• [PATCH 04/15] phy: qcom-qmp-ufs: Add HS G4 mode support to SM8250 SoC   Manivannan Sadhasivam
• [PATCH 05/15] phy: qcom-qmp-ufs: Move HS Rate B register setting to tables_hs_b   Manivannan Sadhasivam
• [PATCH 06/15] dt-bindings: ufs: Add "max-gear" property for UFS device   Manivannan Sadhasivam
• [PATCH 07/15] arm64: dts: qcom: qrb5165-rb5: Add max-gear property to UFS node   Manivannan Sadhasivam
• [PATCH 08/15] scsi: ufs: ufs-qcom: Remove un-necessary goto statements   Manivannan Sadhasivam
• [PATCH 09/15] scsi: ufs: ufs-qcom: Remove un-necessary WARN_ON()   Manivannan Sadhasivam
• [PATCH 10/15] scsi: ufs: ufs-qcom: Use bitfields where appropriate   Manivannan Sadhasivam
• [PATCH 11/15] scsi: ufs: ufs-qcom: Use dev_err_probe() for printing probe error   Manivannan Sadhasivam
• [PATCH 12/15] scsi: ufs: ufs-qcom: Fix the Qcom register name for offset 0xD0   Manivannan Sadhasivam
• [PATCH 13/15] scsi: ufs: ufs-qcom: Factor out the logic finding the HS Gear   Manivannan Sadhasivam
• [PATCH 14/15] scsi: ufs: ufs-qcom: Add support for finding HS gear on new UFS versions   Manivannan Sadhasivam
• [PATCH 15/15] MAINTAINERS: Add myself as the maintainer for Qcom UFS driver   Manivannan Sadhasivam
• [PATCH v1 0/7] PCI/phy: Add support for PCI on sm8350 platform   Dmitry Baryshkov
• [PATCH v1 1/7] dt-bindings: PCI: qcom: Add sm8350 to bindings   Dmitry Baryshkov
• [PATCH v1 2/7] dt-bindings: phy: qcom,qmp-pcie: add sm8350 bindings   Dmitry Baryshkov
• [PATCH v1 3/7] PCI: qcom: Add support for SM8350   Dmitry Baryshkov
• [PATCH v1 4/7] phy: qcom-qmp-pcie: split and rename the sm8450 gen3 PHY config tables   Dmitry Baryshkov
• [PATCH v1 5/7] phy: qcom-qmp-pcie: add support for sm8350 platform   Dmitry Baryshkov
• [PATCH v1 6/7] arm64: dts: qcom: sm8350: add PCIe devices   Dmitry Baryshkov
• [PATCH v1 7/7] arm64: dts: qcom: sm8350-hdk: enable PCIe devices   Dmitry Baryshkov
• [PATCH 11/15] scsi: ufs: ufs-qcom: Use dev_err_probe() for printing probe error   Dmitry Baryshkov
• [PATCH 14/15] scsi: ufs: ufs-qcom: Add support for finding HS gear on new UFS versions   Dmitry Baryshkov
• [PATCH 01/15] phy: qcom-qmp-ufs: Move register settings to qmp_phy_cfg_tables struct   Dmitry Baryshkov
• [PATCH 02/15] phy: qcom-qmp-ufs: Add support for configuring PHY in HS Series B mode   Dmitry Baryshkov
• [PATCH 03/15] phy: qcom-qmp-ufs: Add support for configuring PHY in HS G4 mode   Dmitry Baryshkov
• [PATCH 04/15] phy: qcom-qmp-ufs: Add HS G4 mode support to SM8250 SoC   Dmitry Baryshkov
• [PATCH 05/15] phy: qcom-qmp-ufs: Move HS Rate B register setting to tables_hs_b   Dmitry Baryshkov
• [PATCH 08/15] scsi: ufs: ufs-qcom: Remove un-necessary goto statements   Dmitry Baryshkov
• [PATCH 10/15] scsi: ufs: ufs-qcom: Use bitfields where appropriate   Dmitry Baryshkov
• [PATCH 12/15] scsi: ufs: ufs-qcom: Fix the Qcom register name for offset 0xD0   Dmitry Baryshkov
• [PATCH v1 0/7] PCI/phy: Add support for PCI on sm8350 platform   Bjorn Helgaas
• [PATCH v1 4/7] phy: qcom-qmp-pcie: split and rename the sm8450 gen3 PHY config tables   Bjorn Helgaas
• [PATCH v1 4/7] phy: qcom-qmp-pcie: split and rename the sm8450 gen3 PHY config tables   Dmitry Baryshkov
• [PATCH v1 0/7] PCI/phy: Add support for PCI on sm8350 platform   Dmitry Baryshkov
• [PATCH v2 0/7] arm64: sunxi: h616: Add USB support   Andre Przywara
• [PATCH v2 1/7] dt-bindings: usb: Add H616 compatible string   Andre Przywara
• [PATCH v2 2/7] dt-bindings: phy: Add special clock for Allwinner H616 PHY   Andre Przywara
• [PATCH v2 3/7] phy: sun4i-usb: Introduce port2 SIDDQ quirk   Andre Przywara
• [PATCH v2 4/7] phy: sun4i-usb: Add support for the H616 USB PHY   Andre Przywara
• [PATCH v2 5/7] arm64: dts: allwinner: h616: Add USB nodes   Andre Przywara
• [PATCH v2 6/7] arm64: dts: allwinner: h616: OrangePi Zero 2: Add USB nodes   Andre Przywara
• [PATCH v2 7/7] arm64: dts: allwinner: h616: X96 Mate: Add USB nodes   Andre Przywara
• [PATCH 10/15] scsi: ufs: ufs-qcom: Use bitfields where appropriate   Manivannan Sadhasivam
• [PATCH 12/15] scsi: ufs: ufs-qcom: Fix the Qcom register name for offset 0xD0   Manivannan Sadhasivam
• [PATCH 14/15] scsi: ufs: ufs-qcom: Add support for finding HS gear on new UFS versions   Manivannan Sadhasivam
• [PATCH v8 4/9] phy: fsl: Add Lynx 10G SerDes driver   Sean Anderson
• [PATCH 14/15] scsi: ufs: ufs-qcom: Add support for finding HS gear on new UFS versions   Manivannan Sadhasivam
• [PATCH 01/15] phy: qcom-qmp-ufs: Move register settings to qmp_phy_cfg_tables struct   Manivannan Sadhasivam
• [PATCH v2 00/15] ufs: qcom: Add HS-G4 support   Manivannan Sadhasivam
• [PATCH v2 01/15] phy: qcom-qmp-ufs: Move register settings to qmp_phy_cfg_tables struct   Manivannan Sadhasivam
• [PATCH v2 02/15] phy: qcom-qmp-ufs: Add support for configuring PHY in HS Series B mode   Manivannan Sadhasivam
• [PATCH v2 03/15] phy: qcom-qmp-ufs: Add support for configuring PHY in HS G4 mode   Manivannan Sadhasivam
• [PATCH v2 04/15] phy: qcom-qmp-ufs: Add HS G4 mode support to SM8250 SoC   Manivannan Sadhasivam
• [PATCH v2 05/15] phy: qcom-qmp-ufs: Move HS Rate B register setting to tables_hs_b   Manivannan Sadhasivam
• [PATCH v2 06/15] dt-bindings: ufs: Add "max-device-gear" property for UFS device   Manivannan Sadhasivam
• [PATCH v2 07/15] arm64: dts: qcom: qrb5165-rb5: Add max-device-gear property to UFS node   Manivannan Sadhasivam
• [PATCH v2 08/15] scsi: ufs: ufs-qcom: Remove un-necessary goto statements   Manivannan Sadhasivam
• [PATCH v2 09/15] scsi: ufs: ufs-qcom: Remove un-necessary WARN_ON()   Manivannan Sadhasivam
• [PATCH v2 10/15] scsi: ufs: ufs-qcom: Use bitfields where appropriate   Manivannan Sadhasivam
• [PATCH v2 11/15] scsi: ufs: ufs-qcom: Use dev_err_probe() for printing probe error   Manivannan Sadhasivam
• [PATCH v2 12/15] scsi: ufs: ufs-qcom: Fix the Qcom register name for offset 0xD0   Manivannan Sadhasivam
• [PATCH v2 13/15] scsi: ufs: ufs-qcom: Factor out the logic finding the HS Gear   Manivannan Sadhasivam
• [PATCH v2 14/15] scsi: ufs: ufs-qcom: Add support for finding HS gear on new UFS versions   Manivannan Sadhasivam
• [PATCH v2 15/15] MAINTAINERS: Add myself as the maintainer for Qcom UFS driver   Manivannan Sadhasivam
• [PATCH 01/15] phy: qcom-qmp-ufs: Move register settings to qmp_phy_cfg_tables struct   Dmitry Baryshkov
• [PATCH 14/15] scsi: ufs: ufs-qcom: Add support for finding HS gear on new UFS versions   Dmitry Baryshkov
• [PATCH v2 09/15] scsi: ufs: ufs-qcom: Remove un-necessary WARN_ON()   Andrew Halaney
• [PATCH v2 11/15] scsi: ufs: ufs-qcom: Use dev_err_probe() for printing probe error   Andrew Halaney
• [PATCH v2 13/15] scsi: ufs: ufs-qcom: Factor out the logic finding the HS Gear   Andrew Halaney
• [PATCH v2 14/15] scsi: ufs: ufs-qcom: Add support for finding HS gear on new UFS versions   Andrew Halaney
• [PATCH 06/15] dt-bindings: ufs: Add "max-gear" property for UFS device   Rob Herring
• [PATCH v1 1/7] dt-bindings: PCI: qcom: Add sm8350 to bindings   Rob Herring
• [PATCH v1 2/7] dt-bindings: phy: qcom,qmp-pcie: add sm8350 bindings   Rob Herring
• [PATCH v1 1/7] dt-bindings: PCI: qcom: Add sm8350 to bindings   Dmitry Baryshkov
• [PATCH v2 2/7] dt-bindings: phy: Add special clock for Allwinner H616 PHY   Rob Herring

Last message date: Mon Oct 31 18:03:27 PDT 2022
Archived on: Mon Oct 31 18:03:31 PDT 2022

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...