[PATCH v2 08/15] phy: qcom-qmp-pcie: add register init helper
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Wed Oct 19 06:44:33 PDT 2022
On 19/10/2022 16:25, Johan Hovold wrote:
> On Wed, Oct 19, 2022 at 04:12:02PM +0300, Dmitry Baryshkov wrote:
>> On 19/10/2022 14:35, Johan Hovold wrote:
>>> Generalise the serdes initialisation helper so that it can be used to
>>> initialise all the PHY registers (e.g. serdes, tx, rx, pcs).
>>>
>>> Note that this defers the ungating of the PIPE clock somewhat, which is
>>> fine as it isn't needed until starting the PHY.
>>>
>>> Signed-off-by: Johan Hovold <johan+linaro at kernel.org>
>>> ---
>>> drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 51 +++++++-----------------
>>> 1 file changed, 15 insertions(+), 36 deletions(-)
>>>
>>> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
>>> index dd7e72424fc0..f57d10f20277 100644
>>> --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
>>> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
>>> @@ -1820,46 +1820,32 @@ static void qmp_pcie_configure(void __iomem *base,
>>> qmp_pcie_configure_lane(base, tbl, num, 0xff);
>>> }
>>>
>>> -static void qmp_pcie_serdes_init(struct qmp_pcie *qmp, const struct qmp_phy_cfg_tables *tables)
>>> -{
>>> - void __iomem *serdes = qmp->serdes;
>>> -
>>> - if (!tables)
>>> - return;
>>> -
>>> - qmp_pcie_configure(serdes, tables->serdes, tables->serdes_num);
>>> -}
>>> -
>>> -static void qmp_pcie_lanes_init(struct qmp_pcie *qmp, const struct qmp_phy_cfg_tables *tables)
>>> +static void qmp_pcie_init_registers(struct qmp_pcie *qmp, const struct qmp_phy_cfg_tables *tbls)
>>> {
>>> const struct qmp_phy_cfg *cfg = qmp->cfg;
>>> + void __iomem *serdes = qmp->serdes;
>>> void __iomem *tx = qmp->tx;
>>> void __iomem *rx = qmp->rx;
>>> void __iomem *tx2 = qmp->tx2;
>>> void __iomem *rx2 = qmp->rx2;
>>> + void __iomem *pcs = qmp->pcs;
>>> + void __iomem *pcs_misc = qmp->pcs_misc;
>>>
>>> - if (!tables)
>>> + if (!tbls)
>>> return;
>>>
>>> - qmp_pcie_configure_lane(tx, tables->tx, tables->tx_num, 1);
>>> - qmp_pcie_configure_lane(rx, tables->rx, tables->rx_num, 1);
>>> + qmp_pcie_configure(serdes, tbls->serdes, tbls->serdes_num);
>>> +
>>> + qmp_pcie_configure_lane(tx, tbls->tx, tbls->tx_num, 1);
>>> + qmp_pcie_configure_lane(rx, tbls->rx, tbls->rx_num, 1);
>>>
>>> if (cfg->lanes >= 2) {
>>> - qmp_pcie_configure_lane(tx2, tables->tx, tables->tx_num, 2);
>>> - qmp_pcie_configure_lane(rx2, tables->rx, tables->rx_num, 2);
>>> + qmp_pcie_configure_lane(tx2, tbls->tx, tbls->tx_num, 2);
>>> + qmp_pcie_configure_lane(rx2, tbls->rx, tbls->rx_num, 2);
>>> }
>>> -}
>>> -
>>> -static void qmp_pcie_pcs_init(struct qmp_pcie *qmp, const struct qmp_phy_cfg_tables *tables)
>>> -{
>>> - void __iomem *pcs = qmp->pcs;
>>> - void __iomem *pcs_misc = qmp->pcs_misc;
>>> -
>>> - if (!tables)
>>> - return;
>>>
>>> - qmp_pcie_configure(pcs, tables->pcs, tables->pcs_num);
>>> - qmp_pcie_configure(pcs_misc, tables->pcs_misc, tables->pcs_misc_num);
>>> + qmp_pcie_configure(pcs, tbls->pcs, tbls->pcs_num);
>>> + qmp_pcie_configure(pcs_misc, tbls->pcs_misc, tbls->pcs_misc_num);
>>
>> Nit: could we please keep it as `tables'?
>
> I considered that but found that the longer identifier hurt
> readability so I prefer to use "tbls" here.
>
> Compare
>
> qmp_pcie_configure(serdes, tbls->serdes, tbls->serdes_num);
>
> qmp_pcie_configure_lane(tx, tbls->tx, tbls->tx_num, 1);
> qmp_pcie_configure_lane(rx, tbls->rx, tbls->rx_num, 1);
>
> if (cfg->lanes >= 2) {
> qmp_pcie_configure_lane(tx2, tbls->tx, tbls->tx_num, 2);
> qmp_pcie_configure_lane(rx2, tbls->rx, tbls->rx_num, 2);
> }
>
> qmp_pcie_configure(pcs, tbls->pcs, tbls->pcs_num);
> qmp_pcie_configure(pcs_misc, tbls->pcs_misc, tbls->pcs_misc_num);
>
> with
>
> qmp_pcie_configure(serdes, tables->serdes, tables->serdes_num);
>
> qmp_pcie_configure_lane(tx, tables->tx, tables->tx_num, 1);
> qmp_pcie_configure_lane(rx, tables->rx, tables->rx_num, 1);
>
> if (cfg->lanes >= 2) {
> qmp_pcie_configure_lane(tx2, tables->tx, tables->tx_num, 2);
> qmp_pcie_configure_lane(rx2, tables->rx, tables->rx_num, 2);
> }
>
> qmp_pcie_configure(pcs, tables->pcs, tables->pcs_num);
> qmp_pcie_configure(pcs_misc, tables->pcs_misc, tables->pcs_misc_num);
I'd say, it's up to Vinod. I'd prefer the second version.
--
With best wishes
Dmitry
More information about the linux-phy
mailing list