[PATCH 02/11] dt-bindings: usb: Add NVIDIA Tegra XUSB host controller binding
Wayne Chang
waynec at nvidia.com
Mon Oct 24 00:41:19 PDT 2022
Add device-tree binding documentation for the XUSB host controller present
on Tegra194 and Tegra234 SoC. This controller supports the USB 3.1
specification.
Signed-off-by: Wayne Chang <waynec at nvidia.com>
---
.../bindings/usb/nvidia,tegra-xhci.yaml | 213 ++++++++++++++++++
1 file changed, 213 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra-xhci.yaml
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xhci.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xhci.yaml
new file mode 100644
index 000000000000..d261a419a04f
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xhci.yaml
@@ -0,0 +1,213 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/nvidia,tegra-xhci.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Device tree binding for NVIDIA Tegra XUSB host controller
+
+description:
+ The Tegra XHCI controller supports both USB 2.0 HighSpeed/FullSpeed and
+ USB 3.1 SuperSpeed protocols.
+
+maintainers:
+ - Wayne Chang <waynec at nvidia.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - nvidia,tegra194-xusb # For Tegra194
+ - nvidia,tegra234-xusb # For Tegra234
+
+ reg:
+ minItems: 2
+ items:
+ - description: XUSB host controller registers
+ - description: XUSB host PCI Config registers
+ - description: XUSB host bar2 registers
+
+ reg-names:
+ minItems: 2
+ items:
+ - const: hcd
+ - const: fpci
+ - const: bar2
+
+ interrupts:
+ items:
+ - description: Must contain the XUSB host interrupt.
+ - description: Must contain the XUSB mbox interrupt.
+
+ clocks:
+ items:
+ - description: Clock to enable core XUSB host clock.
+ - description: Clock to enable XUSB falcon clock.
+ - description: Clock to enable XUSB super speed clock.
+ - description: Clock to enable XUSB super speed dev clock.
+ - description: Clock to enable XUSB high speed dev clock.
+ - description: Clock to enable XUSB full speed dev clock.
+ - description: Clock to enable XUSB UTMI PLL clock.
+ - description: Clock to enable core XUSB dev clock.
+ - description: Clock to enable XUSB PLLE clock.
+
+ clock-names:
+ items:
+ - const: xusb_host
+ - const: xusb_falcon_src
+ - const: xusb_ss
+ - const: xusb_ss_src
+ - const: xusb_hs_src
+ - const: xusb_fs_src
+ - const: pll_u_480m
+ - const: clk_m
+ - const: pll_e
+
+ interconnects:
+ items:
+ - description: memory read client
+ - description: memory write client
+
+ interconnect-names:
+ items:
+ - const: dma-mem # read
+ - const: write
+
+ iommus:
+ maxItems: 1
+
+ power-domains:
+ items:
+ - description: XUSBC(host) power-domain
+ - description: XUSBA(superspeed) power-domain
+
+ power-domain-names:
+ items:
+ - const: xusb_host
+ - const: xusb_ss
+
+ nvidia,xusb-padctl:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to the XUSB pad controller that is used to configure the USB pads
+ used by the XUDC controller.
+
+ phys:
+ minItems: 1
+ maxItems: 8
+ description:
+ Must contain an entry for each entry in phy-names.
+ See ../phy/phy-bindings.txt for details.
+
+ phy-names:
+ minItems: 1
+ maxItems: 8
+ items:
+ anyOf:
+ - const: usb2-0
+ - const: usb2-1
+ - const: usb2-2
+ - const: usb2-3
+ - const: usb3-0
+ - const: usb3-1
+ - const: usb3-2
+ - const: usb3-3
+
+ dma-coherent:
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - clocks
+ - clock-names
+ - power-domains
+ - power-domain-names
+ - nvidia,xusb-padctl
+ - phys
+ - phy-names
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra194-xusb
+ then:
+ properties:
+ reg:
+ minItems: 2
+ reg-names:
+ minItems: 2
+ clocks:
+ minItems: 9
+ clock-names:
+ minItems: 9
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra234-xusb
+ then:
+ properties:
+ reg:
+ minItems: 3
+ reg-names:
+ minItems: 3
+ clocks:
+ minItems: 9
+ clock-names:
+ minItems: 9
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/tegra234-gpio.h>
+ #include <dt-bindings/clock/tegra234-clock.h>
+ #include <dt-bindings/memory/tegra234-mc.h>
+ #include <dt-bindings/power/tegra234-powergate.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ usb at 3610000 {
+ compatible = "nvidia,tegra234-xusb";
+ reg = <0x03610000 0x40000>,
+ <0x03600000 0x10000>,
+ <0x03650000 0x10000>;
+ reg-names = "hcd", "fpci", "bar2";
+
+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&bpmp TEGRA234_CLK_XUSB_CORE_HOST>,
+ <&bpmp TEGRA234_CLK_XUSB_FALCON>,
+ <&bpmp TEGRA234_CLK_XUSB_CORE_SS>,
+ <&bpmp TEGRA234_CLK_XUSB_SS>,
+ <&bpmp TEGRA234_CLK_CLK_M>,
+ <&bpmp TEGRA234_CLK_XUSB_FS>,
+ <&bpmp TEGRA234_CLK_UTMIP_PLL>,
+ <&bpmp TEGRA234_CLK_CLK_M>,
+ <&bpmp TEGRA234_CLK_PLLE>;
+ clock-names = "xusb_host", "xusb_falcon_src",
+ "xusb_ss", "xusb_ss_src", "xusb_hs_src",
+ "xusb_fs_src", "pll_u_480m", "clk_m",
+ "pll_e";
+ interconnects = <&mc TEGRA234_MEMORY_CLIENT_XUSB_HOSTR &emc>,
+ <&mc TEGRA234_MEMORY_CLIENT_XUSB_HOSTW &emc>;
+ interconnect-names = "dma-mem", "write";
+ iommus = <&smmu_niso1 TEGRA234_SID_XUSB_HOST>;
+
+ power-domains = <&bpmp TEGRA234_POWER_DOMAIN_XUSBC>,
+ <&bpmp TEGRA234_POWER_DOMAIN_XUSBA>;
+ power-domain-names = "xusb_host", "xusb_ss";
+
+ nvidia,xusb-padctl = <&xusb_padctl>;
+
+ phys = <&pad_lanes_usb2_0>;
+ phy-names = "usb2-0";
+
+ };
--
2.25.1
More information about the linux-phy
mailing list