[PATCH 11/13] dt-bindings: phy: qcom,qmp-usb: fix sc8280xp binding

[Johan Hovold]

On Fri, Oct 28, 2022 at 08:09:11AM +0200, Johan Hovold wrote:
> On Thu, Oct 27, 2022 at 10:15:45PM -0400, Krzysztof Kozlowski wrote:
> > On 24/10/2022 06:06, Johan Hovold wrote:
> > > The current QMP USB PHY bindings are based on the original MSM8996 PCIe
> > > PHY binding which provided multiple PHYs per IP block and these in turn
> > > were described by child nodes.
> > > 
> > > The QMP USB PHY block only provide a single PHY and the remnant child
> > > node does not really reflect the hardware.
> > > 
> > > The original MSM8996 binding also ended up describing the individual
> > > register blocks as belonging to either the wrapper node or the PHY child
> > > nodes.
> > > 
> > 
> > (...)
> > 
> > >      then:
> > > diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb-phy.yaml
> > > new file mode 100644
> > > index 000000000000..95ee81d782f9
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb-phy.yaml
> > 
> > Filename based on compatible, so in this case
> > "qcom,sc8280xp-qmp-usb3-uni-phy.yaml", unless it's like the PCI case?
> 
> Yes, you're right. Thanks for catching that. This should be the only
> sc8280xp USB PHY compatible so the file name should be updates as you
> suggested.

Looks like I missed the '3' in 'usb3' in the previous patch as well.

Johan