[PATCH RESEND v12 0/4] Add the iMX8MP PCIe support

[Vinod Koul]

On 13-10-22, 09:46, Richard Zhu wrote:
> Re-base to the pci-v6.1-changes of pci/next branch. 
> Update the cover-letter, and re-send the v12 patch-set.
> This series adds the i.MX8MP PCIe support and tested on i.MX8MP
> EVK board when one PCIe NVME device is used.
> 
> - i.MX8MP PCIe has reversed initial PERST bit value refer to i.MX8MQ/i.MX8MM.
>   Add the PHY PERST explicitly for i.MX8MP PCIe PHY.
> - Add the i.MX8MP PCIe PHY support in the i.MX8M PCIe PHY driver.
>   And share as much as possible codes with i.MX8MM PCIe PHY.
> - Add the i.MX8MP PCIe support in binding document, DTS files, and PCIe
>   driver.

Applied, thanks

-- 
~Vinod