[RESEND v12 4/4] phy: freescale: imx8m-pcie: Add i.MX8MP PCIe PHY support
Richard Zhu
hongxing.zhu at nxp.com
Wed Oct 12 18:47:02 PDT 2022
Add i.MX8MP PCIe PHY support.
Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
Tested-by: Marek Vasut <marex at denx.de>
Tested-by: Richard Leitner <richard.leitner at skidata.com>
Tested-by: Alexander Stein <alexander.stein at ew.tq-group.com>
Reviewed-by: Lucas Stach <l.stach at pengutronix.de>
Reviewed-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 25 ++++++++++++++++++++--
1 file changed, 23 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
index 3e494612db3c..7585e8080b77 100644
--- a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
+++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
@@ -48,6 +48,7 @@
enum imx8_pcie_phy_type {
IMX8MM,
+ IMX8MP,
};
struct imx8_pcie_phy_drvdata {
@@ -60,6 +61,7 @@ struct imx8_pcie_phy {
struct clk *clk;
struct phy *phy;
struct regmap *iomuxc_gpr;
+ struct reset_control *perst;
struct reset_control *reset;
u32 refclk_pad_mode;
u32 tx_deemph_gen1;
@@ -74,11 +76,11 @@ static int imx8_pcie_phy_power_on(struct phy *phy)
u32 val, pad_mode;
struct imx8_pcie_phy *imx8_phy = phy_get_drvdata(phy);
- reset_control_assert(imx8_phy->reset);
-
pad_mode = imx8_phy->refclk_pad_mode;
switch (imx8_phy->drvdata->variant) {
case IMX8MM:
+ reset_control_assert(imx8_phy->reset);
+
/* Tune PHY de-emphasis setting to pass PCIe compliance. */
if (imx8_phy->tx_deemph_gen1)
writel(imx8_phy->tx_deemph_gen1,
@@ -87,6 +89,8 @@ static int imx8_pcie_phy_power_on(struct phy *phy)
writel(imx8_phy->tx_deemph_gen2,
imx8_phy->base + PCIE_PHY_TRSV_REG6);
break;
+ case IMX8MP: /* Do nothing. */
+ break;
}
if (pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ||
@@ -141,6 +145,9 @@ static int imx8_pcie_phy_power_on(struct phy *phy)
IMX8MM_GPR_PCIE_CMN_RST);
switch (imx8_phy->drvdata->variant) {
+ case IMX8MP:
+ reset_control_deassert(imx8_phy->perst);
+ fallthrough;
case IMX8MM:
reset_control_deassert(imx8_phy->reset);
usleep_range(200, 500);
@@ -181,8 +188,14 @@ static const struct imx8_pcie_phy_drvdata imx8mm_drvdata = {
.variant = IMX8MM,
};
+static const struct imx8_pcie_phy_drvdata imx8mp_drvdata = {
+ .gpr = "fsl,imx8mp-iomuxc-gpr",
+ .variant = IMX8MP,
+};
+
static const struct of_device_id imx8_pcie_phy_of_match[] = {
{.compatible = "fsl,imx8mm-pcie-phy", .data = &imx8mm_drvdata, },
+ {.compatible = "fsl,imx8mp-pcie-phy", .data = &imx8mp_drvdata, },
{ },
};
MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
@@ -238,6 +251,14 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
return PTR_ERR(imx8_phy->reset);
}
+ if (imx8_phy->drvdata->variant == IMX8MP) {
+ imx8_phy->perst =
+ devm_reset_control_get_exclusive(dev, "perst");
+ if (IS_ERR(imx8_phy->perst))
+ dev_err_probe(dev, PTR_ERR(imx8_phy->perst),
+ "Failed to get PCIE PHY PERST control\n");
+ }
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
imx8_phy->base = devm_ioremap_resource(dev, res);
if (IS_ERR(imx8_phy->base))
--
2.25.1
More information about the linux-phy
mailing list