[PATCH 03/11] dt-bindings: usb: Add binding for Cypress cypd4226 I2C driver

[Wayne Chang]

add device-tree binding documentation for Cypress cypd4226 type-C
controller's I2C interface. It is a standard i2c slave with GPIO
input as IRQ interface.

Signed-off-by: Wayne Chang <waynec at nvidia.com>
---
 .../bindings/usb/cypress,cypd4226.yaml        | 86 +++++++++++++++++++
 1 file changed, 86 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml

diff --git a/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml
new file mode 100644
index 000000000000..5ac28ab4e7a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/cypress,cypd4226.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress cypd4226 UCSI I2C Type-C Controller
+
+maintainers:
+  - Wayne Chang <waynec at nvidia.com>
+
+description: |
+  The Cypress cypd4226 UCSI I2C type-C controller is a I2C interface type-C
+  controller.
+
+properties:
+  compatible:
+    const: cypress,cypd4226
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  reg:
+    const: 0x08
+
+  interrupts:
+    maxItems: 1
+
+  cypress,firmware-build:
+    enum:
+      - nv
+      - gn
+    description: |
+      the name of the CCGx firmware built for product series.
+      should be set one of following:
+      - "nv" for the RTX product series
+      - "gn" for the Jetson product series
+
+patternProperties:
+  '^connector@[0-9a-f]+$':
+    $ref: /schemas/connector/usb-connector.yaml#
+    properties:
+      reg:
+        maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/gpio/tegra194-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      #interrupt-cells = <2>;
+
+      ucsi_ccg: ucsi_ccg at 8 {
+        compatible = "cypress,cypd4226";
+        interrupt-parent = <&gpio_aon>;
+        interrupts = <TEGRA194_AON_GPIO(BB, 2) IRQ_TYPE_LEVEL_LOW>;
+        reg = <0x08>;
+        cypress,firmware-build = "gn";
+        status = "okay";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        ccg_typec_con0: connector at 0 {
+          compatible = "usb-c-connector";
+          reg = <0>;
+          label = "USB-C";
+          data-role = "dual";
+          port {
+            ucsi_ccg_p0: endpoint {
+              remote-endpoint = <&usb_role_switch0>;
+            };
+          };
+        };
+      };
+    };
-- 
2.25.1