[PATCH 03/11] dt-bindings: usb: Add binding for Cypress cypd4226 I2C driver

[Rob Herring]

On Mon, Oct 24, 2022 at 03:41:20PM +0800, Wayne Chang wrote:
> add device-tree binding documentation for Cypress cypd4226 type-C
> controller's I2C interface. It is a standard i2c slave with GPIO
> input as IRQ interface.
> 
> Signed-off-by: Wayne Chang <waynec at nvidia.com>
> ---
>  .../bindings/usb/cypress,cypd4226.yaml        | 86 +++++++++++++++++++
>  1 file changed, 86 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml
> 
> diff --git a/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml
> new file mode 100644
> index 000000000000..5ac28ab4e7a1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml
> @@ -0,0 +1,86 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/cypress,cypd4226.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Cypress cypd4226 UCSI I2C Type-C Controller
> +
> +maintainers:
> +  - Wayne Chang <waynec at nvidia.com>
> +
> +description: |

Don't need '|'.

> +  The Cypress cypd4226 UCSI I2C type-C controller is a I2C interface type-C
> +  controller.
> +
> +properties:
> +  compatible:
> +    const: cypress,cypd4226
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +
> +  reg:
> +    const: 0x08
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  cypress,firmware-build:
> +    enum:
> +      - nv
> +      - gn
> +    description: |
> +      the name of the CCGx firmware built for product series.
> +      should be set one of following:
> +      - "nv" for the RTX product series
> +      - "gn" for the Jetson product series
> +
> +patternProperties:
> +  '^connector@[0-9a-f]+$':

Looks like the part only has 2 PD controllers, so 2 connectors only, 
right?

> +    $ref: /schemas/connector/usb-connector.yaml#

       unevaluatedProperties: false

> +    properties:
> +      reg:
> +        maxItems: 1

maximum: 1

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +additionalProperties: true

false

true is only for incomplete, common schemas.

> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/tegra194-gpio.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      #interrupt-cells = <2>;
> +
> +      ucsi_ccg: ucsi_ccg at 8 {
> +        compatible = "cypress,cypd4226";
> +        interrupt-parent = <&gpio_aon>;
> +        interrupts = <TEGRA194_AON_GPIO(BB, 2) IRQ_TYPE_LEVEL_LOW>;
> +        reg = <0x08>;
> +        cypress,firmware-build = "gn";
> +        status = "okay";

Don't need status in examples.

> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        ccg_typec_con0: connector at 0 {
> +          compatible = "usb-c-connector";
> +          reg = <0>;
> +          label = "USB-C";
> +          data-role = "dual";
> +          port {
> +            ucsi_ccg_p0: endpoint {
> +              remote-endpoint = <&usb_role_switch0>;
> +            };
> +          };
> +        };
> +      };
> +    };
> -- 
> 2.25.1
> 
>