[PATCH v2 04/10] phy: sun4i-usb: add support for the USB PHY on F1C100s SoC

Icenowy Zheng uwu at icenowy.me
Tue Oct 11 22:55:56 PDT 2022


The F1C100s SoC has one USB OTG port connected to a MUSB controller.

Add support for its USB PHY.

Signed-off-by: Icenowy Zheng <uwu at icenowy.me>
---
No changes since v1.

 drivers/phy/allwinner/phy-sun4i-usb.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index 3a3831f6059a..2f94cb77637b 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -109,6 +109,7 @@ enum sun4i_usb_phy_type {
 	sun8i_v3s_phy,
 	sun50i_a64_phy,
 	sun50i_h6_phy,
+	suniv_f1c100s_phy,
 };
 
 struct sun4i_usb_phy_cfg {
@@ -859,6 +860,14 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct sun4i_usb_phy_cfg suniv_f1c100s_cfg = {
+	.num_phys = 1,
+	.type = suniv_f1c100s_phy,
+	.disc_thresh = 3,
+	.phyctl_offset = REG_PHYCTL_A10,
+	.dedicated_clocks = true,
+};
+
 static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
 	.num_phys = 3,
 	.type = sun4i_a10_phy,
@@ -988,6 +997,8 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
 	{ .compatible = "allwinner,sun50i-a64-usb-phy",
 	  .data = &sun50i_a64_cfg},
 	{ .compatible = "allwinner,sun50i-h6-usb-phy", .data = &sun50i_h6_cfg },
+	{ .compatible = "allwinner,suniv-f1c100s-usb-phy",
+	  .data = &suniv_f1c100s_cfg },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
-- 
2.37.1




More information about the linux-phy mailing list