[PATCH v2 13/15] phy: qcom-qmp-pcie: add support for pipediv2 clock
Johan Hovold
johan+linaro at kernel.org
Wed Oct 19 04:35:50 PDT 2022
Some QMP PHYs have a second fixed-divider pipe clock that needs to be
enabled along with the pipe clock.
Add support for an optional "pipediv2" clock.
Signed-off-by: Johan Hovold <johan+linaro at kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 42 ++++++++++++++++++++----
1 file changed, 36 insertions(+), 6 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index 9c8e009033f1..c1d74c06fad1 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -1379,7 +1379,9 @@ struct qmp_pcie {
void __iomem *rx2;
struct clk *pipe_clk;
+ struct clk *pipediv2_clk;
struct clk_bulk_data *clks;
+
struct reset_control_bulk_data *resets;
struct regulator_bulk_data *vregs;
@@ -1902,6 +1904,36 @@ static int qmp_pcie_exit(struct phy *phy)
return 0;
}
+static int pipe_clk_enable(struct qmp_pcie *qmp)
+{
+ int ret;
+
+ ret = clk_prepare_enable(qmp->pipe_clk);
+ if (ret) {
+ dev_err(qmp->dev, "failed to enable pipe clock: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(qmp->pipediv2_clk);
+ if (ret) {
+ dev_err(qmp->dev, "failed to enable pipediv2 clock: %d\n", ret);
+ goto err_disable_pipe_clk;
+ }
+
+ return 0;
+
+err_disable_pipe_clk:
+ clk_disable_unprepare(qmp->pipe_clk);
+
+ return ret;
+}
+
+static void pipe_clk_disable(struct qmp_pcie *qmp)
+{
+ clk_disable_unprepare(qmp->pipediv2_clk);
+ clk_disable_unprepare(qmp->pipe_clk);
+}
+
static int qmp_pcie_power_on(struct phy *phy)
{
struct qmp_pcie *qmp = phy_get_drvdata(phy);
@@ -1923,11 +1955,9 @@ static int qmp_pcie_power_on(struct phy *phy)
qmp_pcie_init_registers(qmp, &cfg->tables);
qmp_pcie_init_registers(qmp, mode_tables);
- ret = clk_prepare_enable(qmp->pipe_clk);
- if (ret) {
- dev_err(qmp->dev, "pipe_clk enable failed err=%d\n", ret);
+ ret = pipe_clk_enable(qmp);
+ if (ret)
return ret;
- }
/* Pull PHY out of reset state */
qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
@@ -1950,7 +1980,7 @@ static int qmp_pcie_power_on(struct phy *phy)
return 0;
err_disable_pipe_clk:
- clk_disable_unprepare(qmp->pipe_clk);
+ pipe_clk_disable(qmp);
return ret;
}
@@ -1960,7 +1990,7 @@ static int qmp_pcie_power_off(struct phy *phy)
struct qmp_pcie *qmp = phy_get_drvdata(phy);
const struct qmp_phy_cfg *cfg = qmp->cfg;
- clk_disable_unprepare(qmp->pipe_clk);
+ pipe_clk_disable(qmp);
/* PHY reset */
qphy_setbits(qmp->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
--
2.37.3
More information about the linux-phy
mailing list