[PATCH 10/15] dt-bindings: phy: qcom,qmp-pcie: add sc8280xp bindings

[Krzysztof Kozlowski]

On 17/10/2022 10:53, Johan Hovold wrote:
> Add bindings for the PCIe QMP PHYs found on SC8280XP.
> 
> The PCIe2 and PCIe3 controllers and PHYs on SC8280XP can be used in
> 4-lane mode or as separate controllers and PHYs in 2-lane mode (e.g. as
> PCIe2A and PCIe2B).
> 
> The configuration for a specific system can be read from a TCSR register.
> 
> Signed-off-by: Johan Hovold <johan+linaro at kernel.org>
> ---
>  .../bindings/phy/qcom,qmp-pcie-phy.yaml       | 163 ++++++++++++++++++
>  1 file changed, 163 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml
> new file mode 100644
> index 000000000000..82da95eaa9d6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml

Filename based on compatible, so for example:

qcom,sc8280xp-qmp-pcie-phy.yaml


> @@ -0,0 +1,163 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/qcom,qmp-pcie-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm QMP PHY controller (PCIe)
> +
> +maintainers:
> +  - Vinod Koul <vkoul at kernel.org>
> +
> +description:
> +  QMP PHY controller supports physical layer functionality for a number of
> +  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,sc8280xp-qmp-gen3x1-pcie-phy
> +      - qcom,sc8280xp-qmp-gen3x2-pcie-phy
> +      - qcom,sc8280xp-qmp-gen3x4-pcie-phy
> +
> +  reg:
> +    minItems: 1
> +    maxItems: 2
> +
> +  clocks:
> +    maxItems: 6
> +
> +  clock-names:
> +    items:
> +      - const: aux
> +      - const: cfg_ahb
> +      - const: ref
> +      - const: rchng
> +      - const: pipe
> +      - const: pipediv2
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +  reset-names:
> +    items:
> +      - const: phy
> +
> +  vdda-phy-supply: true
> +
> +  vdda-pll-supply: true
> +
> +  qcom,4ln-config-sel:
> +    description: 4-lane configuration as TCSR syscon phandle, register offset
> +                 and bit number
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    items:
> +      maxItems: 3

You have only one phandle, so you need to describe the items and limit
their number, like here:

https://elixir.bootlin.com/linux/v5.18-rc1/source/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml#L42

This allows you to skip most of property description.

> +
> +  "#clock-cells":
> +    const: 0
> +
> +  clock-output-names:
> +    maxItems: 1
> +
> +  "#phy-cells":
> +    const: 0

Best regards,
Krzysztof