[PATCH v2 08/13] phy: qcom-qmp-usb: rename PHY ops structure

[Johan Hovold]

Rename the PHY operation structure so that it has a "phy_ops" suffix and
move it next to the implementation.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
Signed-off-by: Johan Hovold <johan+linaro at kernel.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index 2e603831e45e..4a7b961d2965 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -2149,6 +2149,13 @@ static int qmp_usb_set_mode(struct phy *phy, enum phy_mode mode, int submode)
 	return 0;
 }
 
+static const struct phy_ops qmp_usb_phy_ops = {
+	.init		= qmp_usb_enable,
+	.exit		= qmp_usb_disable,
+	.set_mode	= qmp_usb_set_mode,
+	.owner		= THIS_MODULE,
+};
+
 static void qmp_usb_enable_autonomous_mode(struct qmp_usb *qmp)
 {
 	const struct qmp_phy_cfg *cfg = qmp->cfg;
@@ -2366,13 +2373,6 @@ static int phy_pipe_clk_register(struct qmp_usb *qmp, struct device_node *np)
 	return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
 }
 
-static const struct phy_ops qmp_usb_ops = {
-	.init		= qmp_usb_enable,
-	.exit		= qmp_usb_disable,
-	.set_mode	= qmp_usb_set_mode,
-	.owner		= THIS_MODULE,
-};
-
 static void __iomem *qmp_usb_iomap(struct device *dev, struct device_node *np,
 					int index, bool exclusive)
 {
@@ -2451,7 +2451,7 @@ static int qmp_usb_create(struct qmp_usb *qmp, struct device_node *np)
 				     "failed to get pipe clock\n");
 	}
 
-	generic_phy = devm_phy_create(dev, np, &qmp_usb_ops);
+	generic_phy = devm_phy_create(dev, np, &qmp_usb_phy_ops);
 	if (IS_ERR(generic_phy)) {
 		ret = PTR_ERR(generic_phy);
 		dev_err(dev, "failed to create PHY: %d\n", ret);
-- 
2.37.3