[PATCH V3 07/21] PCI: tegra194: Disable direct speed change for EP

[Vidya Sagar]

Disable direct speed change for the endpoint to prevent it from initiating
the speed change post physical layer link up at gen1. This leaves the speed
change ownership with the host.

Signed-off-by: Vidya Sagar <vidyas at nvidia.com>
---
V3:
* Reworded the commit message

V2:
* None

 drivers/pci/controller/dwc/pcie-tegra194.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 897e2a22bcd3..dff38f73d9a7 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -1929,6 +1929,10 @@ static void pex_ep_event_pex_rst_deassert(struct tegra_pcie_dw *pcie)
 
 	reset_control_deassert(pcie->core_rst);
 
+	val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
+	val &= ~PORT_LOGIC_SPEED_CHANGE;
+	dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
+
 	if (pcie->update_fc_fixup) {
 		val = dw_pcie_readl_dbi(pci, CFG_TIMER_CTRL_MAX_FUNC_NUM_OFF);
 		val |= 0x1 << CFG_TIMER_CTRL_ACK_NAK_SHIFT;
-- 
2.17.1