[PATCH 18/20] phy: qcom-qmp-pcie-msm8996: drop start and pwrdn-ctrl abstraction
Johan Hovold
johan+linaro at kernel.org
Wed Oct 12 01:50:00 PDT 2022
Drop the start and pwrdn-ctrl abstractions which are no longer needed
since the QMP driver split.
Signed-off-by: Johan Hovold <johan+linaro at kernel.org>
---
.../phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c | 17 +++++++----------
1 file changed, 7 insertions(+), 10 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
index cd8fafe4c295..ff198d846fd2 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
@@ -196,9 +196,6 @@ struct qmp_phy_cfg {
/* array of registers with different offsets */
const unsigned int *regs;
-
- unsigned int start_ctrl;
- unsigned int pwrdn_ctrl;
};
/**
@@ -311,9 +308,6 @@ static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = pciephy_regs_layout,
-
- .start_ctrl = PCS_START | PLL_READY_GATE_EN,
- .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
};
static void qmp_pcie_msm8996_configure_lane(void __iomem *base,
@@ -503,7 +497,8 @@ static int qmp_pcie_msm8996_power_on(struct phy *phy)
* Pull out PHY from POWER DOWN state.
* This is active low enable signal to power-down PHY.
*/
- qphy_setbits(pcs, QPHY_V2_PCS_POWER_DOWN_CONTROL, cfg->pwrdn_ctrl);
+ qphy_setbits(pcs, QPHY_V2_PCS_POWER_DOWN_CONTROL,
+ SW_PWRDN | REFCLK_DRV_DSBL);
usleep_range(POWER_DOWN_DELAY_US_MIN, POWER_DOWN_DELAY_US_MAX);
@@ -511,7 +506,8 @@ static int qmp_pcie_msm8996_power_on(struct phy *phy)
qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
/* start SerDes and Phy-Coding-Sublayer */
- qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
+ qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL],
+ PCS_START | PLL_READY_GATE_EN);
status = pcs + cfg->regs[QPHY_PCS_STATUS];
ret = readl_poll_timeout(status, val, !(val & PHYSTATUS), 200,
@@ -542,11 +538,12 @@ static int qmp_pcie_msm8996_power_off(struct phy *phy)
qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
/* stop SerDes and Phy-Coding-Sublayer */
- qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
+ qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL],
+ SERDES_START | PCS_START);
/* Put PHY into POWER DOWN state: active low */
qphy_clrbits(qphy->pcs, QPHY_V2_PCS_POWER_DOWN_CONTROL,
- cfg->pwrdn_ctrl);
+ SW_PWRDN | REFCLK_DRV_DSBL);
return 0;
}
--
2.35.1
More information about the linux-phy
mailing list