[PATCH v2 2/7] dt-bindings: phy: Add special clock for Allwinner H616 PHY

[Andre Przywara]

The USB PHY IP in the Allwinner H616 SoC requires a quirk that involves
some resources from port 2's PHY and HCI IP. In particular the PMU clock
for port 2 must be surely ungated before accessing the REG_HCI_PHY_CTL
register of port 2. To allow each USB port to be controlled
independently of port 2, we need a handle to that particular PMU clock
in the *PHY* node, as the HCI and PHY part might be handled by separate
drivers.

Add that clock to the requirements of the H616 PHY binding, so that a
PHY driver can apply the quirk in isolation, without requiring help from
port 2's HCI driver.

Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
 .../phy/allwinner,sun8i-h3-usb-phy.yaml       | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
index 77539b4601c24..2df012d13655e 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
@@ -36,18 +36,22 @@ properties:
       - const: pmu3
 
   clocks:
+    minItems: 4
     items:
       - description: USB OTG PHY bus clock
       - description: USB Host 0 PHY bus clock
       - description: USB Host 1 PHY bus clock
       - description: USB Host 2 PHY bus clock
+      - description: PMU clock for host port 2
 
   clock-names:
+    minItems: 4
     items:
       - const: usb0_phy
       - const: usb1_phy
       - const: usb2_phy
       - const: usb3_phy
+      - const: pmu2_clk
 
   resets:
     items:
@@ -96,6 +100,28 @@ required:
   - resets
   - reset-names
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun50i-h616-usb-phy
+    then:
+      properties:
+        clocks:
+          minItems: 5
+
+        clock-names:
+          minItems: 5
+    else:
+      properties:
+        clocks:
+          maxItems: 4
+
+        clock-names:
+          maxItems: 4
+
 additionalProperties: false
 
 examples:
-- 
2.25.1