April 2022 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Fri Apr 1 01:17:22 PDT 2022
Ending: Fri Apr 29 07:21:32 PDT 2022
Messages: 159

• problem with wpa_supplicant 2.10   Jouni Malinen
• Fail to access RSN property with DBus if pairwise cipher suite count is 0   Jouni Malinen
• Retansmitted associate requests with OWE   Jouni Malinen
• Retansmitted associate requests with OWE   James Prestwood
• [PATCH] Fix SIGSEGV of eapol_test   Masashi Honma
• [PATCH v2] Fix SIGSEGV of eapol_test   Masashi Honma
• SIGSEGV in dpp_tcp_conn_status_requested   Masashi Honma
• [PATCH] hostapd: add the missing CONFIG_SAE option to the defconfig   Jouni Malinen
• [PATCH v2] Fix SIGSEGV of eapol_test   Jouni Malinen
• [PATCH] SAE-PK: add the option to the defconfigs   yegorslists at googlemail.com
• hostapd wireguard   Barry Cisna
• [PATCH] AP: guard FT-SAE code with CONFIG_IEEE80211R_AP   Beniamino Galvani
• Can't connec to PEAP anymore on current Ubuntu (2.10 built with openssl3)   Masashi Honma
• Fail to access RSN property with DBus if pairwise cipher suite count is 0   Deroire, Guillaume
• Can't connec to PEAP anymore on current Ubuntu (2.10 built with openssl3)   Sebastien Bacher
• SAE on 6GHz should not allow sae_pwe=0   Nicolas Escande
• [PATCH] Mesh mode: Add check to the disable open mode key in 6GHz.   sharadanandk at gmail.com
• Can't connec to PEAP anymore on current Ubuntu (2.10 built with openssl3)   Masashi Honma
• Can't connec to PEAP anymore on current Ubuntu (2.10 built with openssl3)   Sebastien Bacher
• WPA3-Personal: wpa_supplicant in AP mode issue   Yegor Yefremov
• WPA 3 on (k)FreeBSD?   Andrej Shadura
• [PATCH v2 1/2] nl80211: set NL80211_SCAN_FLAG_COLOCATED_6GHZ in scan   Ilan Peer
• [PATCH v2 2/2] P2P: Do not use collocated scan logic when scanning 6GHz   Ilan Peer
• [PATCH v2 1/2] nl80211: set NL80211_SCAN_FLAG_COLOCATED_6GHZ in scan   Ben Greear
• [PATCH v2 1/2] nl80211: set NL80211_SCAN_FLAG_COLOCATED_6GHZ in scan   Johannes Berg
• WPA 3 on (k)FreeBSD?   Jouni Malinen
• [PATCH] AP: guard FT-SAE code with CONFIG_IEEE80211R_AP   Jouni Malinen
• [PATCH] Fix MIN() macro   Jouni Malinen
• Can't connec to PEAP anymore on current Ubuntu (2.10 built with openssl3)   Jouni Malinen
• WPA 3 on (k)FreeBSD?   Andrej Shadura
• [PATCH v2] wpa_supplicant: Do not associate on 6GHz with forbidden configurations   Jouni Malinen
• [PATCH] SAE-PK: add the option to the defconfigs   Jouni Malinen
• [PATCH v2 1/2] nl80211: set NL80211_SCAN_FLAG_COLOCATED_6GHZ in scan   Peer, Ilan
• [PATCH] Fix MIN() macro   Baligh GASMI
• [PATCH] AP: SAE on 6GHz requires H2E enabled in config   Nicolas Escande
• [PATCH v2 1/2] nl80211: set NL80211_SCAN_FLAG_COLOCATED_6GHZ in scan   Ben Greear
• [PATCH 1/2] tests: Active beacon req for primary/center channel   Jouni Malinen
• [PATCH 02/13] mbssid: retrieve driver capabilities   Jouni Malinen
• [PATCH 01/13] mbssid: add configuration options   Jouni Malinen
• [PATCH 03/13] mbssid: configure all BSSes before beacon setup   Jouni Malinen
• [PATCH 04/13] mbssid: get and set configuration parameters   Jouni Malinen
• [PATCH 05/13] mbssid: add multiple BSSID elements   Jouni Malinen
• [PATCH 09/13] mbssid: set extended capabilities   Jouni Malinen
• [PATCH 10/13] mbssid: DTIM period configuration for EMA AP   Jouni Malinen
• [PATCH 11/13] mbssid: hidden SSID support   Jouni Malinen
• [PATCH 13/13] mbssid: add nl80211 support   Jouni Malinen
• [PATCH 1/2] tests: Active beacon req for primary/center channel   Baligh GASMI
• OpenSSL 3 compatibility patch   Alan DeKok
• [PATCH] ANQP/hostapd: RNR response to RNR query to ANQP query through action frame.   Jouni Malinen
• OpenSSL 3 compatibility patch   Jouni Malinen
• [PATCH v2 1/2] ANQP/hostapd RNR response to RNR query to ANQP query through action frame.   Jouni Malinen
• [PATCH v2 2/2] ANQP/hostapd: Add more data to the ANQP RNR response.   Jouni Malinen
• [PATCH] wpa_supplicant: Use unique IDs for networks and credentials   Jouni Malinen
• [PATCH] RRM: include passive channels in active beacon report scan   Jouni Malinen
• Update eapol_test output for list of supported EAP types   Alan DeKok
• [PATCH v2 1/2] nl80211: set NL80211_SCAN_FLAG_COLOCATED_6GHZ in scan   Peer, Ilan
• [PATCH v3 1/4] nl80211: set NL80211_SCAN_FLAG_COLOCATED_6GHZ in scan   Ilan Peer
• [PATCH v3 2/4] scan: Add a configuration option to disable 6GHz collocated scanning   Ilan Peer
• [PATCH v3 3/4] tests: Extend 'wpas_config_file' test to cover 'non_coloc_6ghz'   Ilan Peer
• [PATCH v3 4/4] P2P: Do not use collocated scan logic when scanning 6GHz   Ilan Peer
• [PATCH v3 2/4] scan: Add a configuration option to disable 6GHz collocated scanning   Ben Greear
• [PATCH] tests: vm: pretend the RNG is initialized   Johannes Berg
• [PATCH v3 2/4] scan: Add a configuration option to disable 6GHz collocated scanning   Peer, Ilan
• [PATCH v3 2/4] scan: Add a configuration option to disable 6GHz collocated scanning   Ben Greear
• [PATCH v4 1/4] nl80211: set NL80211_SCAN_FLAG_COLOCATED_6GHZ in scan   Ilan Peer
• [PATCH v4 2/4] scan: Add a configuration option to disable 6GHz collocated scanning   Ilan Peer
• [PATCH v4 3/4] tests: Extend 'wpas_config_file' test to cover 'non_coloc_6ghz'   Ilan Peer
• [PATCH v4 4/4] P2P: Do not use collocated scan logic when scanning 6GHz   Ilan Peer
• [PATCH] hostapd: allow disabling background radar   greearb at candelatech.com
• [PATCH] hostapd: allow disabling background radar   Janusz Dziedzic
• [PATCH] wpa_supplicant: add the missing CONFIG_HE_OVERRIDES option to the defconfig   yegorslists at googlemail.com
• hostapd config parsing issues   Richard Schleich
• [PATCH] hostapd: allow disabling background radar   Jouni Malinen
• [PATCH] hostapd: allow disabling background radar   Ben Greear
• [PATCH] hostapd: allow disabling background radar   Jouni Malinen
• [PATCH] hostapd: allow disabling background radar   Ben Greear
• [PATCH] hostapd: allow disabling background radar   Jouni Malinen
• [PATCH] tests: vm: pretend the RNG is initialized   Jouni Malinen
• [PATCH] wpa_supplicant: add the missing CONFIG_HE_OVERRIDES option to the defconfig   Jouni Malinen
• [PATCH v3 0/5] Introduce 802.11ax bss coloring support   Jouni Malinen
• [PATCH] hostapd: allow disabling background radar   Ryder Lee
• [PATCH] ACS: always discard DFS channels when DFS isn't allowed   Jouni Malinen
• [PATCH] ACS: honor acs_exclude_dfs with hostapd's ACS implementation   Jouni Malinen
• Update eapol_test output for list of supported EAP types   Jouni Malinen
• [PATCH] sae: enable HMAC_SHA384_KDF and HMAC_SHA512_KDF unconditionally   Jouni Malinen
• [PATCH] hostapd: allow disabling background radar   Johannes Berg
• [PATCH] hostapd: allow disabling background radar   Ben Greear
• [PATCH] Implement new functions for EAP:   Jouni Malinen
• [PATCH] EAPOL_SUPP: ignore Response at CONNECTING state   Jouni Malinen
• [PATCH v4 1/4] nl80211: set NL80211_SCAN_FLAG_COLOCATED_6GHZ in scan   Jouni Malinen
• [PATCH v4 2/4] scan: Add a configuration option to disable 6GHz collocated scanning   Jouni Malinen
• [PATCH v4 4/4] P2P: Do not use collocated scan logic when scanning 6GHz   Jouni Malinen
• General Support   scotty42 at csweber.com
• [PATCH v4 2/4] scan: Add a configuration option to disable 6GHz collocated scanning   Dennis Bland
• FT in combination with WPA/EAP supported ?   roland at treslong.com
• [PATCH] ctrliface: add the debug log, print out the source address of the Ctrl iface when recv command   Jouni Malinen
• [PATCH] ACS: always discard DFS channels when DFS isn't allowed   Nicolas Escande
• [PATCH] wolfSSL: Fix the memory leak of crypto_ec_point_compute_y_sqr()   MurphyZhao
• [PATCH] EAPOL_SUPP: ignore Response at CONNECTING state   xinpeng wang
• [PATCH v4 1/4] nl80211: set NL80211_SCAN_FLAG_COLOCATED_6GHZ in scan   Peer, Ilan
• [PATCH v4 2/4] scan: Add a configuration option to disable 6GHz collocated scanning   Peer, Ilan
• [PATCH v4 4/4] P2P: Do not use collocated scan logic when scanning 6GHz   Peer, Ilan
• [PATCH] Implement new functions for EAP:   Juliusz Sosinowicz
• [PATCH] scan: Added printing of ssid in dump scan res   xinpeng wang
• [PATCH v4 2/4] scan: Add a configuration option to disable 6GHz collocated scanning   Ben Greear
• Key Server support for Group CAs   Greg Goblirsch
• [PATCH] Install wpa_passphrase when not disabled   Alex Kiernan
• [PATCH 11/13] mbssid: hidden SSID support   Aloka Dixit
• [PATCH 10/13] mbssid: DTIM period configuration for EMA AP   Aloka Dixit
• [PATCH 05/13] mbssid: add multiple BSSID elements   Aloka Dixit
• [PATCH 11/13] mbssid: hidden SSID support   Jouni Malinen
• [PATCH 10/13] mbssid: DTIM period configuration for EMA AP   Jouni Malinen
• [PATCH] hostapd: allow enabling background radar   greearb at candelatech.com
• Key Server support for Group CAs   Jouni Malinen
• [PATCH] wolfSSL: Fix the memory leak of crypto_ec_point_compute_y_sqr()   Jouni Malinen
• [PATCH] scan: Added printing of ssid in dump scan res   Jouni Malinen
• [PATCH] Install wpa_passphrase when not disabled   Jouni Malinen
• [PATCH] hostapd: allow enabling background radar   Jouni Malinen
• FT in combination with WPA/EAP supported ?   Jouni Malinen
• [PATCH v4 2/4] scan: Add a configuration option to disable 6GHz collocated scanning   Peer, Ilan
• [PATCH v5 1/4] nl80211: set NL80211_SCAN_FLAG_COLOCATED_6GHZ in scan   Ilan Peer
• [PATCH v5 2/4] scan: Add options to disable 6GHz collocated scanning   Ilan Peer
• [PATCH v5 3/4] tests: Add coverage for testing disabling collocated 6GHz scan   Ilan Peer
• [PATCH v5 4/4] P2P: Do not use collocated scan logic when scanning 6GHz   Ilan Peer
• [PATCH 1/1] MBO: Check association disallowed attribute in beacons and probe responses   Jouni Malinen
• [RFC PATCH 4/4] ACS: allow selecting a better channel when using 40/80/160MHz   Jouni Malinen
• [RFC PATCH 1/4] ACS: extract bw40/80/160 freqs out of acs_usable_bwXXX_chan   Jouni Malinen
• [PATCH] Add support for mbedtls crypto library for STA mode   krish271828 at gmail.com
• [PATCH] MKA: delay allReceiving until potential peer list is empty   Greg Goblirsch
• [PATCH] MKA: Reliable election of the key_server   Greg Goblirsch
• [PATCH] Fix TLS 1.3 and OCSP stapling with wolfSSL   Juliusz Sosinowicz
• [PATCH] SAE-PK support with wolfSSL   Juliusz Sosinowicz
• [PATCH] Fix TLS 1.3 and OCSP stapling with wolfSSL   Juliusz Sosinowicz
• [PATCH] MKA: Do not enable MACsec transmission if there is any risk of a duplicate SCI   Greg Goblirsch
• [PATCH 2/2] MKA: Do not enable MACsec transmission if there is any risk of a duplicate SCI   Greg Goblirsch
• [PATCH] MKA: Do not set new_sak false until the SAK has be generated   Greg Goblirsch
• [PATCH] MKA: Peer message number updated twice   Greg Goblirsch
• [PATCH] Fix TLS 1.3 and OCSP stapling with wolfSSL   Jouni Malinen
• [PATCH v2] MKA: Do not set new_sak false until the SAK has be generated   Greg Goblirsch
• [PATCH v2] MKA: Do not enable MACsec transmission if there is any risk of a duplicate SCI   Greg Goblirsch
• [PATCH v2] MKA: Reliable election of the key_server   Greg Goblirsch
• [PATCH v2] MKA: delay allReceiving until potential peer list is empty   Greg Goblirsch
• [PATCH] MKA: Process DIST-SAK after SAK-USE.   Greg Goblirsch
• [RFC PATCH 4/4] ACS: allow selecting a better channel when using 40/80/160MHz   Nicolas Escande
• [RFC PATCH 1/4] ACS: extract bw40/80/160 freqs out of acs_usable_bwXXX_chan   Nicolas Escande
• [RFC PATCH 4/4] ACS: allow selecting a better channel when using 40/80/160MHz   Nicolas Escande
• [PATCH v2 0/4] ACS: better channel selection for 40/80/160 MHz   Nicolas Escande
• [PATCH v2 1/4] ACS: extract bw40/80/160 freqs out of acs_usable_bwXXX_chan   Nicolas Escande
• [PATCH v2 2/4] ACS: introduce acs_get_bw_center_chan   Nicolas Escande
• [PATCH v2 3/4] ACS: introduce acs_adjust_secondary   Nicolas Escande
• [PATCH v2 4/4] ACS: allow selecting a better channel when using 40/80/160MHz   Nicolas Escande
• [PATCH] Add missing free calls for wolfSSL structs   Juliusz Sosinowicz
• [PATCH] add SSLKEYLOGFILE capability to allow Wireshark TLS decoding of payloads   Alexander Clouter
• [PATCH] MKA: Do not delay transmitting MKPDU at startup   Greg Goblirsch
• [PATCH] Check the return of pbkdf2_sha1 for errors   Juliusz Sosinowicz
• [PATCH] wolfSSL: support both DER and PEM blobs   Juliusz Sosinowicz
• [PATCH] wolfSSL: Fixes for FIPS builds   Juliusz Sosinowicz
• [PATCH] wolfSSL: support both DER and PEM blobs   Juliusz Sosinowicz
• [PATCH] wolfSSL: Fixes for FIPS builds   Juliusz Sosinowicz

Last message date: Fri Apr 29 07:21:32 PDT 2022
Archived on: Sun May 1 05:55:42 PDT 2022

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...