January 2021 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri Jan 1 17:51:39 EST 2021
Ending: Sun Jan 31 15:38:43 EST 2021
Messages: 189

• [PATCH] driver: provide dev_request_mem_resource_by_name() helper   Ahmad Fatoum
  • [PATCH] driver: provide dev_request_mem_resource_by_name() helper   Sascha Hauer
• [PATCH 1/4] video: edid: make accessible without i2c   Ahmad Fatoum
  • [PATCH 3/4] video: implement bochs dispi / QEMU VGA driver for PCI and ISA   Ahmad Fatoum
    • [PATCH] fixup! video: implement bochs dispi / QEMU VGA driver for PCI and ISA   Ahmad Fatoum
    • [PATCH 3/4] video: implement bochs dispi / QEMU VGA driver for PCI and ISA   Sascha Hauer
  • [PATCH 4/4] MIPS: qemu-malta_defconfig: enable VGA output   Ahmad Fatoum
• [PATCH 2/4] video: edid: make edid_check_header externally visible   Ahmad Fatoum
• [PATCH] ARM: at91: constify struct at91_ddramc_register parameters   Ahmad Fatoum
  • [PATCH] ARM: at91: constify struct at91_ddramc_register parameters   Sascha Hauer
• [PATCH master] ARM: at91: at91sam9x5: fix co-existance of erratum-aware and generic reset   Ahmad Fatoum
  • [PATCH master] ARM: at91: at91sam9x5: fix co-existance of erratum-aware and generic reset   Sascha Hauer
• [PATCH] ARM: imx8mq: reclock ARM PLL to 800MHz   Sascha Hauer
• [PATCH] video: sdl: delete useless debug output   Sascha Hauer
• [PATCH] include: <linux/math64.h>: sync with upstream   Sascha Hauer
• [PATCH 1/5] ddr: imx8m: implement i.MX8MQ support   Sascha Hauer
• [PATCH v2 2/5] usb: dwc2: add clk dependency for probe via oftree   Sascha Hauer
• [PATCH] arm/at91: Replace license and copyright boilerplate by SPDX identifiers   Sascha Hauer
• [PATCH] fixup! usb: dwc2: add clk dependency for probe via oftree   Michael Grzeschik
• [PATCH] overlay: return error if target for firmware is missing   Sascha Hauer
• [PATCH v2 0/5] dwc2: improve gadget support   Sascha Hauer
• [PATCH 1/2] fixup! usb: dwc2: Add support for optional usb phy   Sascha Hauer
• [PATCH 1/3] i.MX7: Add CCM definitions for UART3   Sascha Hauer
• No oob scheme defined for oobsize 224 on imx6ull board   Sascha Hauer
  • No oob scheme defined for oobsize 224 on imx6ull board   jameszxj
• [PATCH 1/1]mtd:nand_mxs:update get/set features legacy function call   jameszxj
  • [PATCH 1/1]mtd:nand_mxs:update get/set features legacy function call   Sascha Hauer
• [PATCH v1] MIPS: dts: ar9331: add stdout-path properties   Oleksij Rempel
  • [PATCH v1] MIPS: dts: ar9331: add stdout-path properties   Sascha Hauer
• Rugged Design Industrial touchscreen panel PC   donnie at sihovision.com
• [PATCH 1/2] image-sparse: change retlen to size_t   Steffen Trumtrar
  • [PATCH 1/2] image-sparse: change retlen to size_t   Sascha Hauer
• [PATCH 2/2] image-sparse: change chunk_data_sz to u64   Steffen Trumtrar
• [PATCH] Documentation: boards: sandbox: describe --image flags   Ahmad Fatoum
  • [PATCH] Documentation: boards: sandbox: describe --image flags   Sascha Hauer
• [PATCH] imd: change disabled checksum tag info to debug   Steffen Trumtrar
  • [PATCH] imd: change disabled checksum tag info to debug   Sascha Hauer
• [PATCH] documentation: devicetree: migrate remaining binding to reST   Ahmad Fatoum
  • [PATCH] documentation: devicetree: migrate remaining binding to reST   Sascha Hauer
• [PATCH 1/2] of: overlay: do not parse phandles as properties   Rouven Czerwinski
  • [PATCH 1/2] of: overlay: do not parse phandles as properties   Sascha Hauer
• [PATCH 2/2] ARM: qemu: support for state & env via DT overlay   Rouven Czerwinski
• Barebox OF-Overlay Handling   Marco Felsch
  • Barebox OF-Overlay Handling   Rouven Czerwinski
    • Barebox OF-Overlay Handling   Michael Tretter
      • Barebox OF-Overlay Handling   Michael Tretter
• [PATCH] fixup! of: overlay: do not parse phandles as properties   Rouven Czerwinski
  • [PATCH] fixup! of: overlay: do not parse phandles as properties   Marco Felsch
    • [PATCH] fixup! of: overlay: do not parse phandles as properties   Sascha Hauer
• Cordless Design Industrial Embedded Touch Panel PC   donnie at sihovision.com
  • Cordless Design Industrial Embedded Touch Panel PC   donnie at sihovision.com
• Shock-proof Design Industrial AIO Panel PC   donnie at sihovision.com
  • Shock-proof Design Industrial AIO Panel PC   donnie at sihovision.com
• [PATCH] mtd: nand: fix NAND_ECC_HW mode   Sascha Hauer
• [PATCH] startup: export PATH variable   Sascha Hauer
• Environment is not overwritten at barebox update   AD
  • Environment is not overwritten at barebox update   Ahmad Fatoum
    • Environment is not overwritten at barebox update   AD
      • Environment is not overwritten at barebox update   Ahmad Fatoum
• v2021.01.0   Sascha Hauer
• [PATCH] usb: hub: fix state change check for not powercycled ports   Michael Grzeschik
  • [PATCH] usb: hub: fix state change check for not powercycled ports   Sascha Hauer
• [PATCH] of: overlay: split debug messages for of_overlay_apply_symbols   Marco Felsch
  • [PATCH] of: overlay: split debug messages for of_overlay_apply_symbols   Sascha Hauer
• [PATCH 1/6] ARM: boards: kontron-samx6i: fix memory detection helper   Marco Felsch
  • [PATCH 4/6] ARM: dts: imx6qdl-samx6i: switch to SPDX license identifier   Marco Felsch
  • [PATCH 5/6] ARM: dts: imx6qdl-samx6i: use upstream device tree files   Marco Felsch
  • [PATCH 1/6] ARM: boards: kontron-samx6i: fix memory detection helper   Sascha Hauer
• [PATCH 2/6] ARM: boards: kontron-samx6i: simplify memory detection function   Marco Felsch
• [PATCH 3/6] ARM: dts: imx6qdl-smarc-samx6i: remove iomuxc hog   Marco Felsch
• [PATCH 6/6] ARM: dts: imx6qdl-samx6i: cosmetic partition cleanup   Marco Felsch
• [PATCH 1/2] blspec: allow board files to overwrite config file settings   Marco Felsch
  • [PATCH 2/2] Documentation: blspec: Add blspec fixup documentation   Marco Felsch
  • [PATCH 1/2] blspec: allow board files to overwrite config file settings   Sascha Hauer
    • [PATCH 1/2] blspec: allow board files to overwrite config file settings   Marco Felsch
      • [PATCH 1/2] blspec: allow board files to overwrite config file settings   Sascha Hauer
      • [PATCH 1/2] blspec: allow board files to overwrite config file settings   Marco Felsch
      • [PATCH 1/2] blspec: allow board files to overwrite config file settings   Michael Olbrich
      • [PATCH 1/2] blspec: allow board files to overwrite config file settings   Marco Felsch
• [PATCH 1/4] nvmem: sync stub return values with linux code   Marco Felsch
  • [PATCH 3/4] nvmem: make nvmem_device_write/read public   Marco Felsch
  • [PATCH 1/4] nvmem: sync stub return values with linux code   Sascha Hauer
• [PATCH 2/4] nvmem: add missing stubs   Marco Felsch
• [PATCH 4/4] nvmem: make id optional for of_nvmem_device_get()   Marco Felsch
• [PATCH 0/3] GPMI NAND xload for i.MX6   Andrej Picej
  • [PATCH 1/3] ARM: i.MX: move BCB structures to header file   Andrej Picej
  • [PATCH 2/3] ARM: i.MX: implement GPMI NAND xload   Andrej Picej
    • [PATCH 2/3] ARM: i.MX: implement GPMI NAND xload   Roland Hieber
    • [PATCH 2/3] ARM: i.MX: implement GPMI NAND xload   Sascha Hauer
      • [PATCH 2/3] ARM: i.MX: implement GPMI NAND xload   Andrej Picej
      • [PATCH 2/3] ARM: i.MX: implement GPMI NAND xload   Sascha Hauer
      • [PATCH 2/3] ARM: i.MX: implement GPMI NAND xload   Andrej Picej
      • [PATCH 2/3] ARM: i.MX: implement GPMI NAND xload   Andrej Picej
      • [PATCH 2/3] ARM: i.MX: implement GPMI NAND xload   Sascha Hauer
      • [PATCH 2/3] ARM: i.MX: implement GPMI NAND xload   Andrej Picej
  • [PATCH 3/3] ARM: i.MX: xload-gpmi-nand: apply errata 007117   Andrej Picej
    • [PATCH 3/3] ARM: i.MX: xload-gpmi-nand: apply errata 007117   Sascha Hauer
      • [PATCH 3/3] ARM: i.MX: xload-gpmi-nand: apply errata 007117   Andrej Picej
      • [PATCH 3/3] ARM: i.MX: xload-gpmi-nand: apply errata 007117   Sascha Hauer
      • [PATCH 3/3] ARM: i.MX: xload-gpmi-nand: apply errata 007117   Andrej Picej
      • [PATCH 3/3] ARM: i.MX: xload-gpmi-nand: apply errata 007117   Sascha Hauer
• [RFC PATCH] ARM: phytec-som-imx6: phycard DRAM autodetection   Andrej Picej
  • [RFC PATCH] ARM: phytec-som-imx6: phycard DRAM autodetection   Sascha Hauer
• /env/init script order   barebox+mailing at cookiesoft.de
  • /env/init script order   Sascha Hauer
    • /env/init script order   barebox+mailing at cookiesoft.de
      • /env/init script order   Sascha Hauer
• [PATCH 01/13] ARM: add fncpy.h from linux v4.6   Steffen Trumtrar
  • [PATCH 04/13] reset: add of_reset_control_get to header   Steffen Trumtrar
  • [PATCH 05/13] drivers: add fpga bridge framework   Steffen Trumtrar
  • [PATCH 06/13] drivers: fpga: add socfpga bridges   Steffen Trumtrar
  • [PATCH 07/13] firmware: socfpga: change function prefixes   Steffen Trumtrar
  • [PATCH 08/13] firmware: import fpga-mgr.h from linux   Steffen Trumtrar
  • [PATCH 10/13] of: of_firmware: add support for fpga bridges   Steffen Trumtrar
    • [PATCH 10/13] of: of_firmware: add support for fpga bridges   Sascha Hauer
      • [PATCH 10/13] of: of_firmware: add support for fpga bridges   Steffen Trumtrar
      • [PATCH 10/13] of: of_firmware: add support for fpga bridges   Sascha Hauer
  • [PATCH 11/13] commands: firmwareload: allow loading firmware from dt   Steffen Trumtrar
  • [PATCH 01/13] ARM: add fncpy.h from linux v4.6   Sascha Hauer
• [PATCH 02/13] ARM: mmu: inherit pte flags from pmd   Steffen Trumtrar
• [PATCH 03/13] firmware: socfpga: set APPLYCFG after loading bitstream   Steffen Trumtrar
• [PATCH 09/13] of: kconfig: of_overlay uses firmwaremgr_load_file   Steffen Trumtrar
• [PATCH 12/13] drivers: firmware: socfpga: remove bridges shutdown   Steffen Trumtrar
• [PATCH 13/13] firmware: add support for compressed images   Steffen Trumtrar
• AM335x NAND write hungs   Alexander Shiyan
  • AM335x NAND write hungs   Ahmad Fatoum
    • AM335x NAND write hungs   Alexander Shiyan
      • AM335x NAND write hungs   Ahmad Fatoum
  • [PATCH] mtd: nand: omap_gpmc: Fix wrong length check for real   Sascha Hauer
• [PATCH] ARM: dts: imx6qdl: pfla02: Use NAND pinmux entries from upstream   Alexander Shiyan
  • [PATCH] ARM: dts: imx6qdl: pfla02: Use NAND pinmux entries from upstream   Sascha Hauer
• MAC address set in OCOTP but not visible from ETH0 - i.MX6   DEMIRDJIAN, Antoine
  • MAC address set in OCOTP but not visible from ETH0 - i.MX6   Ahmad Fatoum
    • MAC address set in OCOTP but not visible from ETH0 - i.MX6   DEMIRDJIAN, Antoine
• [PATCH v2 1/3] ARM: i.MX: move BCB structures to header file   Andrej Picej
  • [PATCH v2 2/3] ARM: i.MX: implement GPMI NAND xload   Andrej Picej
  • [PATCH v2 3/3] ARM: i.MX: xload-gpmi-nand: apply errata 007117   Andrej Picej
  • [PATCH v2 1/3] ARM: i.MX: move BCB structures to header file   Sascha Hauer
• Rugged industrial touch monitor for harsh environment   donnie at sihovision.com
• [PATCH] hush: stop parsing string at its end   Sascha Hauer
• [PATCH v2 01/12] ARM: mmu: inherit pte flags from pmd   Steffen Trumtrar
  • [PATCH v2 11/12] drivers: firmware: socfpga: remove bridges shutdown   Steffen Trumtrar
• [PATCH v2 02/12] firmware: socfpga: set APPLYCFG after loading bitstream   Steffen Trumtrar
• [PATCH v2 03/12] reset: add of_reset_control_get to header   Steffen Trumtrar
• [PATCH v2 04/12] drivers: add fpga bridge framework   Steffen Trumtrar
• [PATCH v2 05/12] drivers: fpga: add socfpga bridges   Steffen Trumtrar
• [PATCH v2 06/12] firmware: socfpga: change function prefixes   Steffen Trumtrar
• [PATCH v2 07/12] firmware: import fpga-mgr.h from linux   Steffen Trumtrar
• [PATCH v2 08/12] of: kconfig: of_overlay uses firmwaremgr_load_file   Steffen Trumtrar
• [PATCH v2 09/12] of: of_firmware: add support for fpga bridges   Steffen Trumtrar
  • [PATCH v2 09/12] of: of_firmware: add support for fpga bridges   Sascha Hauer
• [PATCH v2 10/12] commands: firmwareload: allow loading firmware from dt   Steffen Trumtrar
  • [PATCH v2 10/12] commands: firmwareload: allow loading firmware from dt   Sascha Hauer
• [PATCH v2 12/12] firmware: add support for compressed images   Steffen Trumtrar
  • [PATCH v2 12/12] firmware: add support for compressed images   Sascha Hauer
• Durable Industrial Touchsceen Monitor dusproof/waterproof design   donnie at sihovision.com
  • Durable Industrial Touchsceen Monitor dusproof/waterproof design   donnie at sihovision.com
• [RFC PATCH] usb: gadget: dfu: Wrap fs operation in workqueue   Jules Maselbas
  • [RFC PATCH] usb: gadget: dfu: Wrap fs operation in workqueue   Ahmad Fatoum
    • [RFC PATCH] usb: gadget: dfu: Wrap fs operation in workqueue   Jules Maselbas
      • [RFC PATCH] usb: gadget: dfu: Wrap fs operation in workqueue   Ahmad Fatoum
• [PATCH] scripts: Replace license and copyright boilerplate by SPDX identifiers   Uwe Kleine-König
  • [PATCH] scripts: Replace license and copyright boilerplate by SPDX identifiers   Sascha Hauer
• [PATCH] common: Kconfig: improve defaultenv help texts   Roland Hieber
• [PATCH] Documentation: state: recommend a partition type GUID for state GPT partitions   Bastian Krause
• [PATCH] efi: declare prototype for close_protocol BootService   Ahmad Fatoum
• [PATCH 1/2] ARM: i.MX8MM: fix sparse warnings in early clock code   Ahmad Fatoum
  • [PATCH 2/2] ARM: i.MX8MM: move system counter enabling into imx8mm_cpu_lowlevel_init   Ahmad Fatoum
• [PATCH 1/8] commands: usbgadget: remove deprecated s option from help text   Ahmad Fatoum
  • [PATCH 2/8] asm-generic: define fallback memcpy and memset for device I/O   Ahmad Fatoum
  • [PATCH 3/8] ARM: <asm/io.h>: define macros for I/O memcpy/memset   Ahmad Fatoum
  • [PATCH 4/8] asm-generic: io.h: remove wrong use of IOMEM   Ahmad Fatoum
  • [PATCH 5/8] ppc: <asm/io.h>: remove duplicate definition   Ahmad Fatoum
  • [PATCH 6/8] printk: port over Linux print_hex_dump_bytes/print_hex_dump_debug   Ahmad Fatoum
  • [PATCH 7/8] usb: add fallback ->detect method for USB host drivers   Ahmad Fatoum
  • [PATCH 8/8] usb: host: ehci: remove duplicated usb_host_detect() calls   Ahmad Fatoum
• [PATCH] drivers: smc911x fix inverted wait_on_timeout   Mike Nawrocki
  • [PATCH] drivers: smc911x fix inverted wait_on_timeout   Ahmad Fatoum
• Layerscape secure boot   Barbier, Renaud
• [PATCH] Kbuild: add compile_commands.json target   Ahmad Fatoum
• [PATCH 0/7] Add sound and GRUB beep tune support   Ahmad Fatoum
  • [PATCH 1/7] sandbox: migrate to SDL 2.0   Ahmad Fatoum
  • [PATCH 2/7] drivers: add sound card driver support   Ahmad Fatoum
  • [PATCH 3/7] sound: add basic synthesizers for PCM beeper use   Ahmad Fatoum
  • [PATCH 4/7] sound: add SDL 2.0 sound driver   Ahmad Fatoum
  • [PATCH 5/7] commands: add beep command   Ahmad Fatoum
  • [PATCH 6/7] sound: add PWM beeper support   Ahmad Fatoum
  • [PATCH 7/7] sound: add gpio-beeper support   Ahmad Fatoum
• [PATCH] of: overlay: fix warning about format specifier in debug message   Ahmad Fatoum

Last message date: Sun Jan 31 15:38:43 EST 2021
Archived on: Sun Jan 31 15:38:51 EST 2021

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...