[PATCH 2/3] ARM: i.MX: implement GPMI NAND xload

[Roland Hieber]

On Wed, Jan 20, 2021 at 01:51:06PM +0100, Andrej Picej wrote:
> From: Sascha Hauer <s.hauer at pengutronix.de>
> 
> Commit is based on initial Sascha Hauer's work. It implements PBL xload
> mechanism to load image from GPMI NAND flash.
> 
> Additional work was done, so that the NAND's size, page size and OOB's
> size are autodetected and not hardcoded. Detection method follows the
> same methods as used in NAND driver, meaning NAND ONFI support is probed
> and if NAND supports ONFI, NAND memory organization is read from ONFI
> parameter page otherwise "READ ID" is used.
> 
> Currently only implemented for i.MX6 familly of SoCs.
> 
> Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> Signed-off-by: Primoz Fiser <primoz.fiser at norik.com>
> Signed-off-by: Andrej Picej <andrej.picej at norik.com>

I did not look at the code, but I appreciate how those names line up
nicely :-)

 - Roland

-- 
Roland Hieber, Pengutronix e.K.          | r.hieber at pengutronix.de     |
Steuerwalder Str. 21                     | https://www.pengutronix.de/ |
31137 Hildesheim, Germany                | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686         | Fax:   +49-5121-206917-5555 |