January 2012 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Mon Jan 2 05:42:08 EST 2012
Ending: Tue Jan 31 16:29:10 EST 2012
Messages: 357

• *** PROBABLY SPAM *** [PATCH 01/12] oftree: add of_fix_tree()   Sascha Hauer
• [PATCH 0/2] PPC multiple architecture preparation   Sascha Hauer
• [PATCH 0/5] ARM omap: Some fixes and enhancements   Sanjeev Premi
• [PATCH 0/5] ARM omap: Some fixes and enhancements   Premi, Sanjeev
• [PATCH 0/5] ARM omap: Some fixes and enhancements   Premi, Sanjeev
• [PATCH 0/5] Calao dfu upload kernel or uImage and boot it   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/5] fec_imx & miidev: support for 10 MBit connections   Wolfram Sang
• [PATCH 0/6] code size reduction for xloader   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/6] code size reduction for xloader   Sascha Hauer
• [PATCH 0/6] code size reduction for xloader   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/6] code size reduction for xloader   Premi, Sanjeev
• [PATCH 0/6] code size reduction for xloader   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/6] update mx35_3ds suppoprt   Marc Kleine-Budde
• [PATCH 0/9] MPC8xxx support   Renaud Barbier
• [PATCH 0/9] MPC8xxx support   Sascha Hauer
• [PATCH 01/10] ARM omap3: remove OMAP3_COPY_CLOCK_SRAM   Sascha Hauer
• [PATCH 01/12] atmel: reference boards and Caloa boards bbt option enabled   Sascha Hauer
• [PATCH 01/12] atmel: reference boards and Caloa boards bbt option enabled   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/14] MACH SAMSUNG: Rename the whole mach to add more CPUs in future   Juergen Beisert
• [PATCH 02/10] ARM omap3 beagle xload: Move stack to SRAM   Sascha Hauer
• [PATCH 02/14] MACH SAMSUNG/S3C: Do not compile S3C24xx's GPIO support unconditionally   Juergen Beisert
• [PATCH 03/10] ARM omap3: move board_init to pure_initcall   Sascha Hauer
• [PATCH 03/14] MACH SAMSUNG/S3C: Make it more generic for future updates   Juergen Beisert
• [PATCH 04/10] ARM omap3: call a_init from board code   Sascha Hauer
• [PATCH 04/14] MACH SAMSUNG/S3C: Use the correct CPU family name to reflect NAND driver's usage   Juergen Beisert
• [PATCH 05/10] ARM omap3 clock: move pll tables to C code   Sascha Hauer
• [PATCH 05/12] at91: add sram memory devices   Sascha Hauer
• [PATCH 05/14] MACH SAMSUNG/S3C: Parts of the SDHC driver can be shared in the S3C CPU family   Juergen Beisert
• [PATCH 06/10] ARM omap3: remove vector setup from lowlevel code   Sascha Hauer
• [PATCH 06/14] MACH SAMSUNG/S3C: Reflect the CPU name the LCD driver is for   Juergen Beisert
• [PATCH 07/10] ARM omap3: reimplement setup_auxcr in pure asm   Sascha Hauer
• [PATCH 07/14] MACH SAMSUNG/S3C: Separate S3C24XX clock management   Juergen Beisert
• [PATCH 08/10] ARM cache-armv7: Add additional ISB   Sascha Hauer
• [PATCH 08/12] at91/gpio: simplify resources   Sascha Hauer
• [PATCH 08/12] at91/gpio: simplify resources   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/12] at91/gpio: simplify resources   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/14] MACH SAMSUNG/S3C: Separate the clocksource for the S3C family   Juergen Beisert
• [PATCH 09/10] mtd omap nand: fix driver without CONFIG_PARAMETER   Sascha Hauer
• [PATCH 09/10] mtd omap nand: fix driver without CONFIG_PARAMETER   Sascha Hauer
• [PATCH 09/14] MACH SAMSUNG/S3C: Rename register macros to reflect the MACH they are valid for   Juergen Beisert
• [PATCH 1/1] at91: add Calao TNY-A9260/TNY-A9263/TNY-A9G20   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] at91: add Calao TNY-A9260/TNY-A9263/TNY-A9G20   Sascha Hauer
• [PATCH 1/1] at91sam9/lowlevel_init: allow to select the smc chipselect   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] atmel/mci: fix slot_b support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] atmel_nand: disable hardware ecc if not enable   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] calao/usb-926x: update usb gadget support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] calao/usb-926x: update usb gadget support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] CMD_UNCOMPRESS: select UNCOMPRESS   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] devfs-code: fix warning   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] dummy_malloc: add calloc support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] environment: export_/getenv_ull as inline ifndef CONFIG_ENVIRONMENT_VARIABLES   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] mci_spi: specify hw_dev   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] mci_spi: specify hw_dev   Franck JULLIEN
• [PATCH 1/1] Revert "mtd omap nand: fix driver without CONFIG_PARAMETER"   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] usb: fix driver name   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] usb: fix driver name   Sascha Hauer
• [PATCH 1/2] add CONFIG_BAREBOX_MAX_SIZE to check if the size of barebox exceed the target size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] add CONFIG_BAREBOX_MAX_SIZE to check if the size of barebox exceed the target size   Sascha Hauer
• [PATCH 1/2] Add OpenRISC arch   Franck JULLIEN
• [PATCH 1/2] at91: add spi device ressources   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] at91rm9200: fix lowlovel init PIOC base   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] at91rm9200: fix lowlovel init PIOC base   Sascha Hauer
• [PATCH 1/2] at91sam9260/9g20ek: add dfu and usb serial support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] introduce barebox_bare_init_size to known the bare_init size and check it   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] introduce barebox_bare_init_size to known the bare_init size and check it   Peter Korsgaard
• [PATCH 1/2] MAKEALL: explicitly use bash   Sascha Hauer
• [PATCH 1/2] Mini2440: enable more working devices for a more broad compile time test   Juergen Beisert
• [PATCH 1/2] MTD/NAND/DOC: add forgotten change due to API change   Juergen Beisert
• [PATCH 1/2] omap: Remove OMAP_GPMC prompt and usage.   Marek Belisko
• [PATCH 1/2] Preparation stage to support multiple PPC architectures.   Sascha Hauer
• [PATCH 1/2] serial: drop non used at91rm9200 driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2 v2] add config to check if the size of barebox exceed the target size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2 v2] add config to check if the size of barebox exceed the target size   Sascha Hauer
• [PATCH 1/2 v2] add config to check if the size of barebox exceed the target size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2 v2] at91rm9200: fix lowlovel init PIOC base   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2 v2] at91rm9200: fix lowlovel init PIOC base   Sascha Hauer
• [PATCH 1/2 v3] add config to check if the size of barebox exceed the target size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] ARM AT91: Add missing on_flash_bbt in atmel_nand_data   Sascha Hauer
• [PATCH 1/3] ARM AT91: Add missing on_flash_bbt in atmel_nand_data   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] ARM AT91: Add missing on_flash_bbt in atmel_nand_data   Sascha Hauer
• [PATCH 1/3] ARM AT91: Add missing on_flash_bbt in atmel_nand_data   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] ARM AT91: Add missing on_flash_bbt in atmel_nand_data   Sascha Hauer
• [PATCH 1/3] tlsf: enable assertions   Sascha Hauer
• [PATCH 1/4] fsl_udc: update and fix   Eric Bénard
• [PATCH 1/4] fsl_udc: update and fix   Sascha Hauer
• [PATCH 1/4] fsl_udc: update and fix   Eric Bénard
• [PATCH 1/4] omap3: move platform lowlevel init to mach-omap   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] ARM omap: Use updated config option   Sanjeev Premi
• [PATCH 1/5] dfu: add description how to specify the "description" to the long help   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] imx-ipu-fb: Add support for multiple video modes   Teresa Gámez
• [PATCH 1/5] imx-ipu-fb: Add support for multiple video modes   Sascha Hauer
• [PATCH 1/5] net: fec_imx: small cleanups   Wolfram Sang
• [PATCH 1/5] scripts/Kbuild.include: update to latest kernel version   Sascha Hauer
• [PATCH 1/6] banner: add config to disable it   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/6] defaultenv: source the init_board so we can keep exported env   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/6] net/nfs: increase timeout to 15 seconds   Marc Kleine-Budde
• [PATCH 1/7] console: remove unused function prototypes   Sascha Hauer
• [PATCH 1/9] Preparation stage to support multiple PPC architectures.   Renaud Barbier
• [PATCH 1/9] Preparation stage to support multiple PPC architectures.   Sascha Hauer
• [PATCH 10/10] ARM omap3: make omap3_core.S thumb safe   Sascha Hauer
• [PATCH 10/14] MACH SAMSUNG/S3C: Re-work the S3C family timer driver   Juergen Beisert
• [PATCH 11/14] MACH SAMSUNG/S3C: Prepare watchdog unit to be shared in the S3C family   Juergen Beisert
• [PATCH 12/14] MACH SAMSUNG/S3C: Unify the UART driver for the S3C family of CPUs   Juergen Beisert
• [PATCH 13/14] MACH SAMSUNG/S3C: Re-work the memory detection and handling   Juergen Beisert
• [PATCH 14/14] MACH SAMSUNG/S3C: Re-work the GPIO handling for S3C24xx CPUs   Juergen Beisert
• [PATCH 2/2] at91: 9260 and 9g20 add support of join SRAM Memory Mapping   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] at91: add default spi chipselect ressources   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] at91: specify the bare_init max size for each soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] at91rm9200_devices: add missing sizes.h   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] at91sam9260/9g20ek: add led support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] calao/boards: specific BAREBOX_MAX_SIZE to 256KiB   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] defconfig update   Sascha Hauer
• [PATCH 2/2] Make clock shift and mask configurable based on the processor type.   Sascha Hauer
• [PATCH 2/2] MTD/NAND/S3C: re-add change due to API change   Juergen Beisert
• [PATCH 2/2] pandaboard: Add gpmc_generic_init to board init.   Marek Belisko
• [PATCH 2/2] S3C24xx/video: fix forgotten include file name change   Juergen Beisert
• [PATCH 2/2 v2] calao/boards: specify BAREBOX_MAX_IMAGE_SIZE to 256KiB   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2 v2] calao/boards: specify BAREBOX_MAX_IMAGE_SIZE to 256KiB   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] ARM omap beagle xload: update defconfig   Sascha Hauer
• [PATCH 2/3] tlsf: implement malloc_stats   Sascha Hauer
• [PATCH 2/4] beagle: move to arch/arm/boards/beagle   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] dfu: fill bwPollTimeout and better handle detach   Eric Bénard
• [PATCH 2/4] dfu: fill bwPollTimeout and better handle detach   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] ARM omap3beagle: Fix incorrect base addresses   Sanjeev Premi
• [PATCH 2/5] defaultenv/boot: add getopt option support to select boot mode   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] Makefile: disable unused-but-set-variable warning   Sascha Hauer
• [PATCH 2/5] net: fec_imx: refactor R_CNTRL setup   Wolfram Sang
• [PATCH 2/5] video imx-ipu-fb: add num_modes to imx3 boards   Teresa Gámez
• [PATCH 2/6] defaultenv: enable progress for cp   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/6] show_progress: fix progress bar for files > 32 MiB   Marc Kleine-Budde
• [PATCH 2/6] uncompress: add config to disable it   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] kfifo: change kfifo_init to work with a preallocated fifo   Sascha Hauer
• [PATCH 2/9] Define clock source shift and mask.   Renaud Barbier
• [PATCH 2/9] Define clock source shift and mask.   Sascha Hauer
• [PATCH 3/3] fat fs: Fix compile warning   Sascha Hauer
• [PATCH 3/3] tlsf: remove unused stuff from tlsfbits.h   Sascha Hauer
• [PATCH 3/4] omap3evm: move to arch/arm/boards/omap3evm   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] serial gadget: enable/disable on request   Eric Bénard
• [PATCH 3/5] ARM omap3evm: Allow building first stage bootloader   Sanjeev Premi
• [PATCH 3/5] defaultenv/boot: add boot the kernel from the mem   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] imx-ipu-fb: Fix offset for IPU Clock.   Teresa Gámez
• [PATCH 3/5] mtd Kconfig: only select NAND_READ_OOB when NAND is enabled   Sascha Hauer
• [PATCH 3/5] net: fec_imx: enable payload length check and pause frames   Wolfram Sang
• [PATCH 3/6] defaultenv: update: add nfs support   Marc Kleine-Budde
• [PATCH 3/6] filetype: add config to disable it   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/6] poller_call: move from getc to is_timeout   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/6] poller_call: move from getc to is_timeout   Sascha Hauer
• [PATCH 3/6] poller_call: move from getc to is_timeout   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] console: make it work without malloc   Sascha Hauer
• [PATCH 3/9] Added support for the mpc8xxx architecture.   Renaud Barbier
• [PATCH 4/4] eukrea_cpuimx35: fix compilation when CONFIG_USB_GADGET is enabled   Eric Bénard
• [PATCH 4/4] omap343xdsp: move to arch/arm/boards/omap343xdsp   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4] omap343xdsp: move to arch/arm/boards/omap343xdsp   Premi, Sanjeev
• [PATCH 4/5] ARM omap3evm: Enable HSMMC device   Sanjeev Premi
• [PATCH 4/5] filetype: add command support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/5] filetype: add command support   Sascha Hauer
• [PATCH 4/5] imx-ipu-fb: Add overlay support   Teresa Gámez
• [PATCH 4/5] net: miidev: factor out miidev_get_status()   Wolfram Sang
• [PATCH 4/5] net dm9k: Fix compiler warning   Sascha Hauer
• [PATCH 4/6] arm: introduce barebox_bare_init_size to known the bare_init size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/6] ARM: mx3/mx35_3ds: add missing nand device   Marc Kleine-Budde
• [PATCH 4/6] kconfig: sync to linux 3.2-rc4   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/7] ARM: panic on div 0   Sascha Hauer
• [PATCH 4/9] Header files added to support the mpc8xxx architecture.   Renaud Barbier
• [PATCH 5/5] ARM omap: Set IFT target as MLO   Sanjeev Premi
• [PATCH 5/5] ARM pcm043: Add overlay support   Teresa Gámez
• [PATCH 5/5] Makefile: disable warning: generating trampoline in object   Sascha Hauer
• [PATCH 5/5] net: fec_imx: configure FEC for 10Mbit when necessary   Wolfram Sang
• [PATCH 5/5] net: fec_imx: configure FEC for 10Mbit when necessary   Eric Bénard
• [PATCH 5/5] net: fec_imx: configure FEC for 10Mbit when necessary   Wolfram Sang
• [PATCH 5/5] usb-926x: add dfu mem options support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5] usb-926x: add dfu mem options support   Sascha Hauer
• [PATCH 5/6] ARM: add ARM_EXCEPTION_VECTOR6 options   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/6] ARM: add ARM_EXCEPTION_VECTOR6 options   Sascha Hauer
• [PATCH 5/6] ARM: mx3/mx35_3ds: increase kernel partition size to 4 MiB   Marc Kleine-Budde
• [PATCH 5/6] param: add config to disable it   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] initcalls: do not hang if an initcall fails   Sascha Hauer
• [PATCH 5/9] Update to existing header files.   Renaud Barbier
• [PATCH 6/6] ARM: mx3/mx35_3ds: add (optinal) support for flexcan0   Marc Kleine-Budde
• [PATCH 6/6] at91: use ARM_EXCEPTION_VECTOR6 options   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/6] driver: switch driver_d name to const char*   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] startup: use regular debug statements in initcall debugging   Sascha Hauer
• [PATCH 6/9] Add file and compilation of strmhz.   Renaud Barbier
• [PATCH 7/7] Add dump_stack function   Sascha Hauer
• [PATCH 7/9] Add-ons to the PPC library to support the mpc8xxx.   Renaud Barbier
• [PATCH 7/9] ARM: move exception vectors away from start of binary   Sascha Hauer
• [PATCH 7/9] ARM: move exception vectors away from start of binary   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/9] ARM: move exception vectors away from start of binary   Sascha Hauer
• [PATCH 7/9] ARM: move exception vectors away from start of binary   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/9] Update (ppc) Makefile and Kconfig.   Renaud Barbier
• [PATCH 9/9] P1_P2 platform support code and configuratin file for the P2020RDB.   Renaud Barbier
• [PATCH] Add pwm core support   Sascha Hauer
• [PATCH] arm/mach-pxa: add CCCR bits definitions   Robert Jarzmik
• [PATCH] arm/mach-pxa: add pulse width modulator controller   Robert Jarzmik
• [PATCH] arm/mach-pxa: add pulse width modulator controller   Sascha Hauer
• [PATCH] arm/mach-pxa: add pulse width modulator controller   Robert Jarzmik
• [PATCH] arm/mach-pxa: add pulse width modulator controller   Sascha Hauer
• [PATCH] arm/mach-pxa: add standard LCD panel GPIO settings   Robert Jarzmik
• [PATCH] ARM: mark 'lr' as clobbered by inline assembler   Enrico Scholz
• [PATCH] ARM: move exception vectors away from start of binary   Sascha Hauer
• [PATCH] ARM: move exception vectors away from start of binary   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: move exception vectors away from start of binary   Sascha Hauer
• [PATCH] ARM: set SCTRL[A] only when architecture does not support unaligned access   Enrico Scholz
• [PATCH] arm: update mach-types   Juergen Kilb
• [PATCH] ARM omap pandaboard: update defconfig   Sascha Hauer
• [PATCH] ARM pca-a-l1: call omap3_core_init from board code   Juergen Kilb
• [PATCH] ARM pca-a-l1: delete platform.S   Juergen Kilb
• [PATCH] ARM pca-a-l1: fix board_init   Sascha Hauer
• [PATCH] ARM pca-a-l1: fix board_init   Juergen Kilb
• [PATCH] ARM pca-a-l1: fix board_init   Sascha Hauer
• [PATCH] ARM pca-a-l1: fix board_init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM pca-a-l1: fix board_init   Jürgen Kilb
• [PATCH] ARM pca-a-l1: should depend on ARCH_OMAP3   Juergen Kilb
• [PATCH] atmel_spi: add mesg->actual_length, so devices can use it for read/write   Michael Grzeschik
• [PATCH] boards: mx23evk: add MMC support   Wolfram Sang
• [PATCH] decompress_inflate.c: fix "no previous prototype for 'gunzip'" warning   Antony Pavlov
• [PATCH] decompress_inflate.c: fix "no previous prototype for 'gunzip'" warning   Sascha Hauer
• [PATCH] drivers/mtd: fix docg3 write support   Robert Jarzmik
• [PATCH] drivers/mtd: fix mtdraw write support   Robert Jarzmik
• [PATCH] Fix compile failures due to arch move   Juergen Beisert
• [PATCH] freescale-mx35-3-stack: support 256 MiB RAM   Thomas Mayer
• [PATCH] freescale-mx35-3-stack: support 256 MiB RAM   Sascha Hauer
• [PATCH] freescale-mx35-3-stack: support 256 MiB RAM   Thomas Mayer
• [PATCH] fs: fat: gen_numname() is only need with FS_FAT_WRITE   Wolfram Sang
• [PATCH] fs: fat: gen_numname() is only need with FS_FAT_WRITE   Sascha Hauer
• [PATCH] fs: fat: gen_numname() is only need with FS_FAT_WRITE   Wolfram Sang
• [PATCH] loadb: only try to change the baudrate if the driver has this feature   Eric Bénard
• [PATCH] loadb: only try to change the baudrate if the driver has this feature   Sascha Hauer
• [PATCH] loadb: only try to change the baudrate if the driver has this feature   Eric Bénard
• [PATCH] loadb: only try to change the baudrate if the driver has this feature   Sascha Hauer
• [PATCH] mtd/core.c: fix MTDPGALG   Eric Bénard
• [PATCH] mxs: add support for mx28-evk   Wolfram Sang
• [PATCH] nand_omap_bch_decoder: Fix up error detection   Sascha Hauer
• [PATCH] omap3 towards thumb2 support   Sascha Hauer
• [PATCH] omap3 towards thumb2 support   Premi, Sanjeev
• [PATCH] omap3 towards thumb2 support   Sascha Hauer
• [PATCH] omap3 towards thumb2 support   Premi, Sanjeev
• [PATCH] omap3 towards thumb2 support   Premi, Sanjeev
• [PATCH] omap3 towards thumb2 support   Sascha Hauer
• [PATCH] omap3 towards thumb2 support   Premi, Sanjeev
• [PATCH] omap3 towards thumb2 support   Premi, Sanjeev
• [PATCH] omap3 towards thumb2 support   Sascha Hauer
• [PATCH] omap3 towards thumb2 support   Premi, Sanjeev
• [PATCH] omap3 towards thumb2 support   Sascha Hauer
• [PATCH] omap3 towards thumb2 support   Premi, Sanjeev
• [PATCH] u_serial: add setbrg to be able to use loadb & co   Eric Bénard
• [PATCH] u_serial: add setbrg to be able to use loadb & co   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] uart drivers: use xzalloc instead of xmalloc   Sascha Hauer
• [PATCH] usb/gadget: fix poller NPE in early polling   Robert Jarzmik
• [PATCH] usb/gadget: fix poller NPE in early polling   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor   Sascha Hauer
• [PATCH] video imx: specify num_modes in platform_data   Sascha Hauer
• [PATCH] video imx: specify num_modes in platform_data   Sascha Hauer
• [PATCH V2 0/3] Add MSystems Disk-On-Chip G3 support   Robert Jarzmik
• [PATCH V2 0/3] Add MSystems Disk-On-Chip G3 support   Sascha Hauer
• [PATCH V2 0/3] Add MSystems Disk-On-Chip G3 support   Robert Jarzmik
• [PATCH V2 1/2] Add support for the Phytec phyCARD-A-L1 (PCA-A-L1).   Jürgen Kilb
• [PATCH v2 3/4] serial gadget: enable/disable on request   Eric Bénard
• [PATCH v2 3/4] serial gadget: enable/disable on request   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 3/4] serial gadget: enable/disable on request   Eric Bénard
• [PATCH v2 3/4] serial gadget: enable/disable on request   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 3/4] serial gadget: enable/disable on request   Sascha Hauer
• [PATCH v2] at91: add Calao TNY-A9260/TNY-A9263/TNY-A9G20   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V2] mxs: add support for mx28-evk   Wolfram Sang
• [PATCH v2] ns16550: support for UART with broken FIFO   Antony Pavlov
• [PATCH v2] Prepare to add more Samsung S3C CPUs to barebox   Juergen Beisert
• [PATCH V2] usb/gadget: fix poller NPE in early polling   Robert Jarzmik
• [PATCH V2] usb/gadget: fix poller NPE in early polling   Marc Kleine-Budde
• [PATCH v3 0/2] ns16550-related patches   Antony Pavlov
• [PATCH v3 1/2] ns16550: support for UART with broken FIFO   Antony Pavlov
• [PATCH v3 2/2] ns16550: make ns16550_serial_init_port() shorter   Antony Pavlov
• [PATCH v3 3/4] serial gadget: enable/disable on request   Eric Bénard
• [PATCH v3 3/4] serial gadget: enable/disable on request   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V3] usb/gadget: fix poller NPE in early polling   Robert Jarzmik
• [PATCH V3] usb/gadget: fix poller NPE in early polling   Sascha Hauer
• [PATCH V3] usb/gadget: fix poller NPE in early polling   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V3] usb/gadget: fix poller NPE in early polling   Robert Jarzmik
• [PATCH v4 0/2] ns16550-related patches   Antony Pavlov
• [PATCH v4 1/4] ns16550: support for UART with broken FIFO   Antony Pavlov
• [PATCH v4 1/5] fsl_udc: update and fix   Eric Bénard
• [PATCH V4 1/7] drivers/mtd: move nand.c into core.c   Sascha Hauer
• [PATCH V4 1/7] drivers/mtd: move nand.c into core.c   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4 2/4] ns16550: make ns16550_serial_init_port() shorter   Antony Pavlov
• [PATCH v4 2/5] dfu: fill bwPollTimeout and better handle detach   Eric Bénard
• [PATCH v4 3/4] ns16550: write zero to ier only once   Antony Pavlov
• [PATCH v4 3/5] serial gadget: enable/disable on request   Eric Bénard
• [PATCH v4 4/4] ns16550: fix ier selection   Antony Pavlov
• [PATCH v4 4/5] timeout: add poller_call   Eric Bénard
• [PATCH v4 4/5] timeout: add poller_call   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4 4/5] timeout: add poller_call   Eric Bénard
• [PATCH v4 4/5] timeout: add poller_call   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4 4/5] timeout: add poller_call   Eric Bénard
• [PATCH v4 4/5] timeout: add poller_call   Eric Bénard
• [PATCH v4 5/5] eukrea_cpuimx35: fix compilation when CONFIG_USB_GADGET is enabled   Eric Bénard
• [PATH] Some fixes after global changes   Juergen Beisert
• [RESEND PATCH] atmel_nand: add on_flash_btt option to enable bbt option   Jean-Christophe PLAGNIOL-VILLARD
• [RESEND PATCH] atmel_nand: add on_flash_btt option to enable bbt option   Sascha Hauer
• [RESEND PATCH] atmel_nand: add on_flash_btt option to enable bbt option   Jean-Christophe PLAGNIOL-VILLARD
• [RESEND PATCH] atmel_nand: add on_flash_btt option to enable bbt option   Sascha Hauer
• [RESEND PATCH] atmel_nand: add on_flash_btt option to enable bbt option   Jean-Christophe PLAGNIOL-VILLARD
• [RFC 1/2] ARM omap: Add null console   Sanjeev Premi
• [RFC 1/2] ARM omap: Add null console   Sascha Hauer
• [RFC 2/2] ARM omap: Add CONFIG_SILENT   Sanjeev Premi
• [RFC 2/2] ARM omap: Add CONFIG_SILENT   Sascha Hauer
• [RFC 2/2] ARM omap: Add CONFIG_SILENT   Jean-Christophe PLAGNIOL-VILLARD
• [RFC 2/2] ARM omap: Add CONFIG_SILENT   Premi, Sanjeev
• [RFC 2/2] ARM omap: Add CONFIG_SILENT   Premi, Sanjeev
• [RFC 2/2] ARM omap: Add CONFIG_SILENT   Sascha Hauer
• [RFC] fix gpmc_nand_probe without param support   Jan Weitzel
• [RFC] ns16550: support for UART with broken FIFO   Antony Pavlov
• [RFC] ns16550: support for UART with broken FIFO   Sascha Hauer
• [RFC] ns16550: support for UART with broken FIFO   Antony Pavlov
• [RFC] ns16550: support for UART with broken FIFO   Jean-Christophe PLAGNIOL-VILLARD
• [RFC] ns16550: support for UART with broken FIFO   Antony Pavlov
• [RFC] ns16550: support for UART with broken FIFO   Jean-Christophe PLAGNIOL-VILLARD
• Adding New comand   Sascha Hauer
• Adding New comand   G Rajender
• Adding New comand   Sascha Hauer
• Barebox IRC channel   Franck JULLIEN
• Barebox IRC channel   Jean-Christophe PLAGNIOL-VILLARD
• barebox support for 4460-based pandaboard ES?   Sascha Hauer
• booting kernel from SD card   Belisko Marek
• Booting linux on a custom iMX27 board   Igor
• Booting linux on a custom iMX27 board   Uwe Kleine-König
• Booting linux on a custom iMX27 board   Igor
• compile patches   Sascha Hauer
• git pull failed: CONFLICT   Antony Pavlov
• git pull failed: CONFLICT   Uwe Kleine-König
• git pull failed: CONFLICT   Sascha Hauer
• how to boot from external RAM   G Rajender
• how to boot from external RAM   Sascha Hauer
• how to boot from external RAM   G Rajender
• how to boot from external RAM   Sascha Hauer
• i.MX53 QSB   David Lynch Jr.
• i.MX53 QSB   Sascha Hauer
• i.MX53 QSB   Marc Reilly
• i.MX53 QSB   Jean-Christophe PLAGNIOL-VILLARD
• i.MX53 QSB   Michael Olbrich
• i.MX53 QSB   David Lynch Jr.
• IIM on iMX27 "how-to" needed   Igor
• IIM on iMX27 "how-to" needed   Sascha Hauer
• IIM on iMX27 "how-to" needed   Igor Trevisan
• IIM on iMX27 "how-to" needed   Sascha Hauer
• imx35 NFC and jffs2   guenter.gebhardt at rafi.de
• imx35 NFC and jffs2   Sascha Hauer
• Kconfig   David H. Lynch Jr.
• mx35-3stack 124MiByte RAM   Marc Kleine-Budde
• mx35-3stack 124MiByte RAM   Sascha Hauer
• mx35-3stack 124MiByte RAM   Marc Kleine-Budde
• Pandaboard kernel 3.2.1 loaded from barebox   Belisko Marek
• Pandaboard kernel 3.2.1 loaded from barebox   Sascha Hauer
• Pandaboard kernel 3.2.1 loaded from barebox   Belisko Marek
• Pandaboard kernel 3.2.1 loaded from barebox   Sascha Hauer
• patches for compiler warnings   Sascha Hauer
• some debug patches   Sascha Hauer
• tlsf patches   Sascha Hauer
• v2012.01.0   Sascha Hauer

Last message date: Tue Jan 31 16:29:10 EST 2012
Archived on: Tue Jan 31 16:29:16 EST 2012

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...