[PATCH 0/5] ARM omap: Some fixes and enhancements

[Premi, Sanjeev]

> -----Original Message-----
> From: Premi, Sanjeev 
> Sent: Wednesday, January 11, 2012 8:27 PM
> To: barebox at lists.infradead.org
> Cc: Premi, Sanjeev
> Subject: [PATCH 0/5] ARM omap: Some fixes and enhancements
> 

It appears that something went wrong in my script for
sending patches and "cc:" list was stripped.

Specifically adding cc: here for review of these patches.

~sanjeev

> First two patches in this series are fixes to problems in the
> existing code.
> 
> Next two patches enable specific features on the OMAP3EVM.
> 
> The last patch is an enhancement to avoid manual copy each
> time barebox is built as the primary bootloader i.e. in the
> xload configuration.
> 
> Sanjeev Premi (5):
>   ARM omap: Use updated config option
>   ARM omap3beagle: Fix incorrect base addresses
>   ARM omap3evm: Allow building first stage bootloader
>   ARM omap3evm: Enable HSMMC device
>   ARM omap: Set IFT target as MLO
> 
>  arch/arm/Makefile                       |    5 +++--
>  arch/arm/boards/omap/board-beagle.c     |   10 +++++-----
>  arch/arm/boards/omap/board-omap3evm.c   |    7 ++++++-
>  arch/arm/boards/omap/board-sdp343x.c    |    2 +-
>  arch/arm/boards/phycard-a-l1/pca-a-l1.c |    2 +-
>  arch/arm/mach-omap/Kconfig              |    1 +
>  6 files changed, 17 insertions(+), 10 deletions(-)
> 
>