[PATCH] arm/mach-pxa: add CCCR bits definitions

[Robert Jarzmik]

Add CCCR bits definition for PXA SoC, so that the bootloader
can setup a stable core clock frequency, which is not the
initial reset clock, as required by Intel's PXA27x Processor
family developer's guide, chapter 3.5.5, table 3.7 (clock
frequencies).

Signed-off-by: Robert Jarzmik <robert.jarzmik at free.fr>
---
 arch/arm/mach-pxa/include/mach/pxa2xx-regs.h |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
index 4762d8a..b43648e 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -222,6 +222,11 @@
 #define CCCR_N_MASK	0x0380	/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
 #define CCCR_M_MASK	0x0060	/* Memory Frequency to Run Mode Frequency Multiplier */
 #define CCCR_L_MASK	0x001f	/* Crystal Frequency to Memory Frequency Multiplier */
+#define CCCR_CPDIS	(1 << 31)
+#define CCCR_PPDIS	(1 << 30)
+#define CCCR_LCD26	(1 << 27)
+#define CCCR_PLL_EARLY	(1 << 26)
+#define CCCR_A		(1 << 25)
 
 #define CKEN_AC97CONF   (1 << 31)    /* AC97 Controller Configuration */
 #define CKEN_CAMERA	(1 << 24)	/* Camera Interface Clock Enable */
-- 
1.7.5.4