[PATCH] arm/mach-pxa: add pulse width modulator controller
Robert Jarzmik
robert.jarzmik at free.fr
Thu Jan 26 14:55:28 EST 2012
Add PXA embedded pulse width modulator support. The PWM can
generate signals from 49.6kHz to 1.625MHz.
Signed-off-by: Robert Jarzmik <robert.jarzmik at free.fr>
---
arch/arm/mach-pxa/Makefile | 2 +
arch/arm/mach-pxa/include/mach/clock.h | 1 +
arch/arm/mach-pxa/include/mach/pwm.h | 23 ++++++++
arch/arm/mach-pxa/include/mach/regs-pwm.h | 20 +++++++
arch/arm/mach-pxa/pwm.c | 80 +++++++++++++++++++++++++++++
arch/arm/mach-pxa/speed-pxa27x.c | 5 ++
6 files changed, 131 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-pxa/include/mach/pwm.h
create mode 100644 arch/arm/mach-pxa/include/mach/regs-pwm.h
create mode 100644 arch/arm/mach-pxa/pwm.c
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index c01a9e0..461b2fe 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -1,6 +1,8 @@
obj-y += clocksource.o
obj-y += common.o
obj-y += gpio.o
+obj-y += devices.o
+obj-y += pwm.o
obj-$(CONFIG_ARCH_PXA2XX) += mfp-pxa2xx.o
obj-$(CONFIG_ARCH_PXA27X) += speed-pxa27x.o
diff --git a/arch/arm/mach-pxa/include/mach/clock.h b/arch/arm/mach-pxa/include/mach/clock.h
index c53432f..f86152f 100644
--- a/arch/arm/mach-pxa/include/mach/clock.h
+++ b/arch/arm/mach-pxa/include/mach/clock.h
@@ -14,5 +14,6 @@
unsigned long pxa_get_uartclk(void);
unsigned long pxa_get_mmcclk(void);
unsigned long pxa_get_lcdclk(void);
+unsigned long pxa_get_pwmclk(void);
#endif /* !__MACH_CLOCK_H */
diff --git a/arch/arm/mach-pxa/include/mach/pwm.h b/arch/arm/mach-pxa/include/mach/pwm.h
new file mode 100644
index 0000000..03c4f04
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pwm.h
@@ -0,0 +1,23 @@
+/*
+ * (C) 2011 Robert Jarzmik <robert.jarzmik at free.fr>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <mach/regs-pwm.h>
+
+int pwm_config(void __iomem *iobase, int duty_ns, int period_ns);
+int pwm_enable(void __iomem *iobase);
+void pwm_disable(void __iomem *iobase);
diff --git a/arch/arm/mach-pxa/include/mach/regs-pwm.h b/arch/arm/mach-pxa/include/mach/regs-pwm.h
new file mode 100644
index 0000000..cef6dcd
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-pwm.h
@@ -0,0 +1,20 @@
+/*
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_MACH_REGS_PWM_H
+#define __ASM_MACH_REGS_PWM_H
+
+#include <mach/hardware.h>
+
+/*
+ * Pulse modulator registers
+ */
+#define PWM0 0x40B00000
+#define PWM1 0x40C00000
+#define PWM2 0x40B00010
+#define PWM3 0x40C00010
+
+#endif
diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c
new file mode 100644
index 0000000..3750e35
--- /dev/null
+++ b/arch/arm/mach-pxa/pwm.c
@@ -0,0 +1,80 @@
+/*
+ * simple driver for PWM (Pulse Width Modulator) controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * 2008-02-13 initial version
+ * eric miao <eric.miao at marvell.com>
+ * 2012 Robert Jarzmik <robert.jarzmik at free.fr>
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <io.h>
+
+#include <mach/clock.h>
+#include <mach/pxa-regs.h>
+#include <asm-generic/div64.h>
+#include <linux/compiler.h>
+
+/* PWM registers and bits definitions */
+#define PWMCR (0x00)
+#define PWMDCR (0x04)
+#define PWMPCR (0x08)
+
+#define PWMCR_SD (1 << 6)
+#define PWMDCR_FD (1 << 10)
+
+/*
+ * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE
+ * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
+ * PWM_CLK_RATE = 13 MHz
+ */
+int pwm_config(void __iomem *iobase, int duty_ns, int period_ns)
+{
+ unsigned long long c;
+ unsigned long period_cycles, prescale, pv, dc;
+
+ if (iobase == NULL || period_ns == 0 || duty_ns > period_ns)
+ return -EINVAL;
+
+ c = pxa_get_pwmclk();
+ c = c * period_ns;
+ do_div(c, 1000000000);
+ period_cycles = c;
+
+ if (period_cycles < 1)
+ period_cycles = 1;
+ prescale = (period_cycles - 1) / 1024;
+ pv = period_cycles / (prescale + 1) - 1;
+
+ if (prescale > 63)
+ return -EINVAL;
+
+ if (duty_ns == period_ns)
+ dc = PWMDCR_FD;
+ else
+ dc = (pv + 1) * duty_ns / period_ns;
+
+ /* NOTE: the clock to PWM has to be enabled first
+ * before writing to the registers
+ */
+ __raw_writel(prescale, iobase + PWMCR);
+ __raw_writel(dc, iobase + PWMDCR);
+ __raw_writel(pv, iobase + PWMPCR);
+
+ return 0;
+}
+
+int pwm_enable(void __iomem *iobase)
+{
+ CKEN |= CKEN_PWM1 | CKEN_PWM0;
+ return 0;
+}
+
+void pwm_disable(void __iomem *iobase)
+{
+ CKEN &= ~CKEN_PWM1 & ~CKEN_PWM0;
+}
diff --git a/arch/arm/mach-pxa/speed-pxa27x.c b/arch/arm/mach-pxa/speed-pxa27x.c
index 534eb1d..1de034c 100644
--- a/arch/arm/mach-pxa/speed-pxa27x.c
+++ b/arch/arm/mach-pxa/speed-pxa27x.c
@@ -47,3 +47,8 @@ unsigned long pxa_get_lcdclk(void)
{
return pxa_get_lcdclk_10khz() * 10000;
}
+
+unsigned long pxa_get_pwmclk(void)
+{
+ return BASE_CLK;
+}
--
1.7.5.4
More information about the barebox
mailing list