[PATCH 12/14] MACH SAMSUNG/S3C: Unify the UART driver for the S3C family of CPUs

Juergen Beisert jbe at pengutronix.de
Mon Jan 2 06:44:00 EST 2012


The UART is one of the units which differs only slightly inside the S3C family.
Prepare this driver to share it with more recent CPUs.

Signed-off-by: Juergen Beisert <jbe at pengutronix.de>
---
 arch/arm/boards/a9m2410/a9m2410.c                 |    2 +-
 arch/arm/boards/a9m2440/a9m2440.c                 |    2 +-
 arch/arm/boards/mini2440/mini2440.c               |    2 +-
 arch/arm/mach-samsung/include/mach/s3c-iomap.h    |   15 ++---
 drivers/serial/Kconfig                            |   10 ++--
 drivers/serial/Makefile                           |    2 +-
 drivers/serial/{serial_s3c24x0.c => serial_s3c.c} |   68 +++++++++++++--------
 7 files changed, 58 insertions(+), 43 deletions(-)
 rename drivers/serial/{serial_s3c24x0.c => serial_s3c.c} (68%)

diff --git a/arch/arm/boards/a9m2410/a9m2410.c b/arch/arm/boards/a9m2410/a9m2410.c
index 989dcf7..a66afb9 100644
--- a/arch/arm/boards/a9m2410/a9m2410.c
+++ b/arch/arm/boards/a9m2410/a9m2410.c
@@ -167,7 +167,7 @@ void __bare_init nand_boot(void)
 
 static int a9m2410_console_init(void)
 {
-	add_generic_device("s3c24x0_serial", -1, NULL, UART1_BASE, UART1_SIZE,
+	add_generic_device("s3c_serial", -1, NULL, S3C_UART1_BASE, S3C_UART1_SIZE,
 			   IORESOURCE_MEM, NULL);
 	return 0;
 }
diff --git a/arch/arm/boards/a9m2440/a9m2440.c b/arch/arm/boards/a9m2440/a9m2440.c
index 1986efb..077d726 100644
--- a/arch/arm/boards/a9m2440/a9m2440.c
+++ b/arch/arm/boards/a9m2440/a9m2440.c
@@ -168,7 +168,7 @@ void __bare_init nand_boot(void)
 
 static int a9m2440_console_init(void)
 {
-	add_generic_device("s3c24x0_serial", -1, NULL, UART1_BASE, UART1_SIZE,
+	add_generic_device("s3c_serial", -1, NULL, S3C_UART1_BASE, S3C_UART1_SIZE,
 			   IORESOURCE_MEM, NULL);
 	return 0;
 }
diff --git a/arch/arm/boards/mini2440/mini2440.c b/arch/arm/boards/mini2440/mini2440.c
index 0186465..ec4eb05 100644
--- a/arch/arm/boards/mini2440/mini2440.c
+++ b/arch/arm/boards/mini2440/mini2440.c
@@ -342,7 +342,7 @@ static int mini2440_console_init(void)
 	s3c_gpio_mode(GPH2_TXD0);
 	s3c_gpio_mode(GPH3_RXD0);
 
-	add_generic_device("s3c24x0_serial", -1, NULL, UART1_BASE, UART1_SIZE,
+	add_generic_device("s3c_serial", -1, NULL, S3C_UART1_BASE, S3C_UART1_SIZE,
 			   IORESOURCE_MEM, NULL);
 	return 0;
 }
diff --git a/arch/arm/mach-samsung/include/mach/s3c-iomap.h b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
index 9677803..7c45c53 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-iomap.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
@@ -28,7 +28,7 @@
 #define S3C_CLOCK_POWER_BASE		0x4C000000
 #define S3C2410_LCD_BASE		0x4D000000
 #define S3C24X0_NAND_BASE		0x4E000000
-#define S3C24X0_UART_BASE		0x50000000
+#define S3C_UART_BASE			0x50000000
 #define S3C_TIMER_BASE			0x51000000
 #define S3C2410_USB_DEVICE_BASE		0x52000140
 #define S3C_WATCHDOG_BASE		0x53000000
@@ -52,13 +52,12 @@
 #endif
 #define NFC_RAM_SIZE 4096
 
-/* internal UARTs (driver based) */
-#define UART1_BASE (S3C24X0_UART_BASE)
-#define UART1_SIZE 0x4000
-#define UART2_BASE (S3C24X0_UART_BASE + 0x4000)
-#define UART2_SIZE 0x4000
-#define UART3_BASE (S3C24X0_UART_BASE + 0x8000)
-#define UART3_SIZE 0x4000
+#define S3C_UART1_BASE (S3C_UART_BASE)
+#define S3C_UART1_SIZE 0x4000
+#define S3C_UART2_BASE (S3C_UART_BASE + 0x4000)
+#define S3C_UART2_SIZE 0x4000
+#define S3C_UART3_BASE (S3C_UART_BASE + 0x8000)
+#define S3C_UART3_SIZE 0x4000
 
 /* CS configuration (direct access) */
 #define BWSCON (S3C24X0_MEMCTL_BASE)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 592d543..186b596 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -78,16 +78,16 @@ config DRIVER_SERIAL_PL010
 	help
 	  Enable this to get support for AMBA PL010 based serial devices
 
-config DRIVER_SERIAL_S3C24X0
-	bool "Samsung S3C24X0 serial driver"
+config DRIVER_SERIAL_S3C
+	bool "Samsung S3C serial driver"
 	depends on ARCH_S3C24xx
 	default y
 	help
-	  Say Y here if you want to use the CONS on a S3C24X0 CPU
+	  Say Y here if you want to use the CONS on a Samsung S3C CPU
 
-config DRIVER_SERIAL_S3C24X0_AUTOSYNC
+config DRIVER_SERIAL_S3C_AUTOSYNC
 	bool "Enable auto flow"
-	depends on DRIVER_SERIAL_S3C24X0
+	depends on DRIVER_SERIAL_S3C
 	help
 	  Say Y here if you want to use the auto flow feature of this
 	  UART. RTS and CTS will be handled by the hardware when enabled.
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index a702125..e2d56b9 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -15,7 +15,7 @@ obj-$(CONFIG_DRIVER_SERIAL_MPC5XXX)		+= serial_mpc5xxx.o
 obj-$(CONFIG_DRIVER_SERIAL_BLACKFIN)		+= serial_blackfin.o
 obj-$(CONFIG_DRIVER_SERIAL_NS16550)		+= serial_ns16550.o
 obj-$(CONFIG_DRIVER_SERIAL_PL010)		+= serial_pl010.o
-obj-$(CONFIG_DRIVER_SERIAL_S3C24X0)		+= serial_s3c24x0.o
+obj-$(CONFIG_DRIVER_SERIAL_S3C)			+= serial_s3c.o
 obj-$(CONFIG_DRIVER_SERIAL_ALTERA)		+= serial_altera.o
 obj-$(CONFIG_DRIVER_SERIAL_ALTERA_JTAG)		+= serial_altera_jtag.o
 obj-$(CONFIG_DRIVER_SERIAL_PXA)			+= serial_pxa.o
diff --git a/drivers/serial/serial_s3c24x0.c b/drivers/serial/serial_s3c.c
similarity index 68%
rename from drivers/serial/serial_s3c24x0.c
rename to drivers/serial/serial_s3c.c
index 4191a49..b7e0987 100644
--- a/drivers/serial/serial_s3c24x0.c
+++ b/drivers/serial/serial_s3c.c
@@ -1,5 +1,5 @@
 /*
- * (c) 2009 Juergen Beisert <j.beisert at saschahauer.de>
+ * (c) 2009...2011 Juergen Beisert <j.beisert at pengutronix.de>
  *
  * Based on code from:
  * (c) 2004 Sascha Hauer <sascha at saschahauer.de>
@@ -41,20 +41,36 @@
 #define URXH 0x24		/* receive */
 #define UBRDIV 0x28		/* baudrate generator */
 
-static int s3c24x0_serial_setbaudrate(struct console_device *cdev, int baudrate)
+static unsigned s3c_get_arch_uart_input_clock(void __iomem *base)
+{
+	unsigned reg = readw(base + UCON);
+
+	switch (reg & 0xc00) {
+		case 0x000:
+		case 0x800:
+			return s3c_get_pclk();
+		case 0x400:
+			break;	/* TODO UEXTCLK */
+		case 0xc00:
+			break;	/* TODO FCLK/n */
+	}
+
+	return 0;	/* not nice, but we can't emit an error message! */
+}
+
+static int s3c_serial_setbaudrate(struct console_device *cdev, int baudrate)
 {
 	struct device_d *dev = cdev->dev;
 	void __iomem *base = dev->priv;
 	unsigned val;
 
-	/* value is calculated so : PCLK / (16 * baudrate) -1 */
-	val = s3c_get_pclk() / (16 * baudrate) - 1;
+	val = s3c_get_arch_uart_input_clock(base) / (16 * baudrate) - 1;
 	writew(val, base + UBRDIV);
 
 	return 0;
 }
 
-static int s3c24x0_serial_init_port(struct console_device *cdev)
+static int s3c_serial_init_port(struct console_device *cdev)
 {
 	struct device_d *dev = cdev->dev;
 	void __iomem *base = dev->priv;
@@ -71,7 +87,7 @@ static int s3c24x0_serial_init_port(struct console_device *cdev)
 	 */
 	writew(0x0245, base + UCON);
 
-#ifdef CONFIG_DRIVER_SERIAL_S3C24X0_AUTOSYNC
+#ifdef CONFIG_DRIVER_SERIAL_S3C_AUTOSYNC
 	writeb(0x10, base + UMCON); /* enable auto flow control */
 #else
 	writeb(0x01, base + UMCON); /* RTS up */
@@ -80,7 +96,7 @@ static int s3c24x0_serial_init_port(struct console_device *cdev)
 	return 0;
 }
 
-static void s3c24x0_serial_putc(struct console_device *cdev, char c)
+static void s3c_serial_putc(struct console_device *cdev, char c)
 {
 	struct device_d *dev = cdev->dev;
 	void __iomem *base = dev->priv;
@@ -92,7 +108,7 @@ static void s3c24x0_serial_putc(struct console_device *cdev, char c)
 	writeb(c, base + UTXH);
 }
 
-static int s3c24x0_serial_tstc(struct console_device *cdev)
+static int s3c_serial_tstc(struct console_device *cdev)
 {
 	struct device_d *dev = cdev->dev;
 	void __iomem *base = dev->priv;
@@ -104,7 +120,7 @@ static int s3c24x0_serial_tstc(struct console_device *cdev)
 	return 0;
 }
 
-static int s3c24x0_serial_getc(struct console_device *cdev)
+static int s3c_serial_getc(struct console_device *cdev)
 {
 	struct device_d *dev = cdev->dev;
 	void __iomem *base = dev->priv;
@@ -116,7 +132,7 @@ static int s3c24x0_serial_getc(struct console_device *cdev)
 	return readb(base + URXH);
 }
 
-static void s3c24x0_serial_flush(struct console_device *cdev)
+static void s3c_serial_flush(struct console_device *cdev)
 {
 	struct device_d *dev = cdev->dev;
 	void __iomem *base = dev->priv;
@@ -125,7 +141,7 @@ static void s3c24x0_serial_flush(struct console_device *cdev)
 		;
 }
 
-static int s3c24x0_serial_probe(struct device_d *dev)
+static int s3c_serial_probe(struct device_d *dev)
 {
 	struct console_device *cdev;
 
@@ -134,13 +150,13 @@ static int s3c24x0_serial_probe(struct device_d *dev)
 	dev->priv = dev_request_mem_region(dev, 0);
 	cdev->dev = dev;
 	cdev->f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR;
-	cdev->tstc = s3c24x0_serial_tstc;
-	cdev->putc = s3c24x0_serial_putc;
-	cdev->getc = s3c24x0_serial_getc;
-	cdev->flush = s3c24x0_serial_flush;
-	cdev->setbrg = s3c24x0_serial_setbaudrate;
+	cdev->tstc = s3c_serial_tstc;
+	cdev->putc = s3c_serial_putc;
+	cdev->getc = s3c_serial_getc;
+	cdev->flush = s3c_serial_flush;
+	cdev->setbrg = s3c_serial_setbaudrate;
 
-	s3c24x0_serial_init_port(cdev);
+	s3c_serial_init_port(cdev);
 
 	/* Enable UART */
 	console_register(cdev);
@@ -148,25 +164,25 @@ static int s3c24x0_serial_probe(struct device_d *dev)
 	return 0;
 }
 
-static void s3c24x0_serial_remove(struct device_d *dev)
+static void s3c_serial_remove(struct device_d *dev)
 {
 	struct console_device *cdev = dev->type_data;
 
-	s3c24x0_serial_flush(cdev);
+	s3c_serial_flush(cdev);
 	free(cdev);
 	dev->type_data = NULL;
 }
 
-static struct driver_d s3c24x0_serial_driver = {
-	.name   = "s3c24x0_serial",
-	.probe  = s3c24x0_serial_probe,
-	.remove = s3c24x0_serial_remove,
+static struct driver_d s3c_serial_driver = {
+	.name   = "s3c_serial",
+	.probe  = s3c_serial_probe,
+	.remove = s3c_serial_remove,
 };
 
-static int s3c24x0_serial_init(void)
+static int s3c_serial_init(void)
 {
-	register_driver(&s3c24x0_serial_driver);
+	register_driver(&s3c_serial_driver);
 	return 0;
 }
 
-console_initcall(s3c24x0_serial_init);
+console_initcall(s3c_serial_init);
-- 
1.7.7.3




More information about the barebox mailing list