[PATCH v4 3/5] serial gadget: enable/disable on request
Eric Bénard
eric at eukrea.com
Wed Jan 4 04:36:47 EST 2012
- add a usbserial command to enable/disable the serial gadget
- allow dfu and usbserial to cohexist in the same barebox
- add a timeout in u_serial so that we don't get locked if the user
enable usbserial from a UART console but doesn't consume the data
on the usbserial port created on the PC
- remove debug or verbose printf
- tested on i.MX25 & i.MX35 & usb-a926x
Signed-off-by: Eric Bénard <eric at eukrea.com>
Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
v4 : introduce HAVE_OBEX as suggested by Sascha
v3 : fix comment in usbserial.c and add usbserial.h
v2 : always recompile after fixing checkpatch notes ...
commands/Makefile | 1 +
commands/usbserial.c | 108 +++++++++++++++++++++++++++++++++++++++++
drivers/usb/gadget/Kconfig | 5 +--
drivers/usb/gadget/f_acm.c | 4 +-
drivers/usb/gadget/serial.c | 48 ++++++++++++++++--
drivers/usb/gadget/u_serial.c | 22 +++++---
include/usb/usbserial.h | 19 +++++++
7 files changed, 188 insertions(+), 19 deletions(-)
create mode 100644 commands/usbserial.c
create mode 100644 include/usb/usbserial.h
diff --git a/commands/Makefile b/commands/Makefile
index 24753be..43630e1 100644
--- a/commands/Makefile
+++ b/commands/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_CMD_LSMOD) += lsmod.o
obj-$(CONFIG_CMD_INSMOD) += insmod.o
obj-$(CONFIG_CMD_BMP) += bmp.o
obj-$(CONFIG_USB_GADGET_DFU) += dfu.o
+obj-$(CONFIG_USB_GADGET_SERIAL) += usbserial.o
obj-$(CONFIG_CMD_GPIO) += gpio.o
obj-$(CONFIG_CMD_UNCOMPRESS) += uncompress.o
obj-$(CONFIG_CMD_I2C) += i2c.o
diff --git a/commands/usbserial.c b/commands/usbserial.c
new file mode 100644
index 0000000..eb31934
--- /dev/null
+++ b/commands/usbserial.c
@@ -0,0 +1,108 @@
+/*
+ * usbserial.c - usb serial gadget command
+ *
+ * Copyright (c) 2011 Eric Bénard <eric at eukrea.com>, Eukréa Electromatique
+ * based on dfu.c which is :
+ * Copyright (c) 2009 Sascha Hauer <s.hauer at pengutronix.de>, Pengutronix
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <common.h>
+#include <command.h>
+#include <errno.h>
+#include <malloc.h>
+#include <getopt.h>
+#include <fs.h>
+#include <xfuncs.h>
+#include <usb/usbserial.h>
+
+static int do_usbserial(struct command *cmdtp, int argc, char *argv[])
+{
+ int opt;
+ struct usb_serial_pdata pdata;
+ char *argstr;
+ char *manufacturer = "barebox";
+ char *productname = CONFIG_BOARDINFO;
+ u16 idVendor = 0, idProduct = 0;
+ int mode = 0;
+
+ while ((opt = getopt(argc, argv, "m:p:V:P:asd")) > 0) {
+ switch (opt) {
+ case 'm':
+ manufacturer = optarg;
+ break;
+ case 'p':
+ productname = optarg;
+ break;
+ case 'V':
+ idVendor = simple_strtoul(optarg, NULL, 0);
+ break;
+ case 'P':
+ idProduct = simple_strtoul(optarg, NULL, 0);
+ break;
+ case 'a':
+ mode = 0;
+ break;
+#ifdef HAVE_OBEX
+ case 'o':
+ mode = 1;
+ break;
+#endif
+ case 's':
+ mode = 2;
+ break;
+ case 'd':
+ usb_serial_unregister();
+ return 0;
+ }
+ }
+
+ argstr = argv[optind];
+
+ pdata.manufacturer = manufacturer;
+ pdata.productname = productname;
+ pdata.idVendor = idVendor;
+ pdata.idProduct = idProduct;
+ pdata.mode = mode;
+
+ return usb_serial_register(&pdata);
+}
+
+BAREBOX_CMD_HELP_START(usbserial)
+BAREBOX_CMD_HELP_USAGE("usbserial [OPTIONS] <description>\n")
+BAREBOX_CMD_HELP_SHORT("Enable/disable a serial gadget on the USB device interface.\n")
+BAREBOX_CMD_HELP_OPT ("-m <str>", "Manufacturer string (barebox)\n")
+BAREBOX_CMD_HELP_OPT ("-p <str>", "product string (" CONFIG_BOARDINFO ")\n")
+BAREBOX_CMD_HELP_OPT ("-V <id>", "vendor id\n")
+BAREBOX_CMD_HELP_OPT ("-P <id>", "product id\n")
+BAREBOX_CMD_HELP_OPT ("-a", "CDC ACM (default)\n")
+#ifdef HAVE_OBEX
+BAREBOX_CMD_HELP_OPT ("-o", "CDC OBEX\n")
+#endif
+BAREBOX_CMD_HELP_OPT ("-s", "Generic Serial\n")
+BAREBOX_CMD_HELP_OPT ("-d", "Disable the serial gadget\n")
+BAREBOX_CMD_HELP_END
+
+/**
+ * @page usbserial_command
+ */
+
+BAREBOX_CMD_START(usbserial)
+ .cmd = do_usbserial,
+ .usage = "Serial gadget enable/disable",
+ BAREBOX_CMD_HELP(cmd_usbserial_help)
+BAREBOX_CMD_END
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index fd471c0..797d19f 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -30,8 +30,7 @@ config USB_GADGET_DRIVER_PXA27X
select POLLER
endchoice
-choice
- prompt "USB Gadget drivers"
+comment "USB Gadget drivers"
config USB_GADGET_DFU
bool
@@ -42,7 +41,5 @@ config USB_GADGET_SERIAL
depends on EXPERIMENTAL
prompt "Serial Gadget"
-endchoice
-
endif
diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c
index 43b4992..218aed2 100644
--- a/drivers/usb/gadget/f_acm.c
+++ b/drivers/usb/gadget/f_acm.c
@@ -407,7 +407,7 @@ static void acm_disable(struct usb_function *f)
{
struct f_acm *acm = func_to_acm(f);
- printf("acm ttyGS%d deactivated\n", acm->port_num);
+ VDBG(cdev, "acm ttyGS%d deactivated\n", acm->port_num);
gserial_disconnect(&acm->port);
usb_ep_disable(acm->notify);
acm->notify->driver_data = NULL;
@@ -473,7 +473,7 @@ static int acm_notify_serial_state(struct f_acm *acm)
int status;
if (acm->notify_req) {
- printf("acm ttyGS%d serial state %04x\n",
+ VDBG(cdev, "acm ttyGS%d serial state %04x\n",
acm->port_num, acm->serial_state);
status = acm_cdc_notify(acm, USB_CDC_NOTIFY_SERIAL_STATE,
0, &acm->serial_state, sizeof(acm->serial_state));
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 8ba9ab5..98a501b 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -4,6 +4,7 @@
#include <usb/ch9.h>
#include <usb/gadget.h>
#include <usb/composite.h>
+#include <usb/usbserial.h>
#include <asm/byteorder.h>
#include "u_serial.h"
@@ -52,7 +53,9 @@ static struct usb_gadget_strings *dev_strings[] = {
};
static int use_acm = 1;
+#ifdef HAVE_OBEX
static int use_obex = 0;
+#endif
static unsigned n_ports = 1;
static int serial_bind_config(struct usb_configuration *c)
@@ -63,8 +66,10 @@ static int serial_bind_config(struct usb_configuration *c)
for (i = 0; i < n_ports && status == 0; i++) {
if (use_acm)
status = acm_bind_config(c, i);
+#ifdef HAVE_OBEX
else if (use_obex)
status = obex_bind_config(c, i);
+#endif
else
status = gser_bind_config(c, i);
}
@@ -100,7 +105,7 @@ static int gs_bind(struct usb_composite_dev *cdev)
int gcnum;
struct usb_gadget *gadget = cdev->gadget;
int status;
-printf("%s\n", __func__);
+
status = gserial_setup(cdev->gadget, n_ports);
if (status < 0)
return status;
@@ -174,7 +179,7 @@ static struct usb_composite_driver gserial_driver = {
.bind = gs_bind,
};
-static int __init gserial_init(void)
+int usb_serial_register(struct usb_serial_pdata *pdata)
{
/* We *could* export two configs; that'd be much cleaner...
* but neither of these product IDs was defined that way.
@@ -187,19 +192,43 @@ static int __init gserial_init(void)
#ifdef CONFIG_ARCH_PXA2XX
use_acm = 0;
#endif
+ switch (pdata->mode) {
+ case 1:
+#ifdef HAVE_OBEX
+ use_obex = 1;
+#endif
+ use_acm = 0;
+ break;
+ case 2:
+#ifdef HAVE_OBEX
+ use_obex = 1;
+#endif
+ use_acm = 0;
+ break;
+ default:
+#ifdef HAVE_OBEX
+ use_obex = 0;
+#endif
+ use_acm = 1;
+ }
+
if (use_acm) {
serial_config_driver.label = "CDC ACM config";
serial_config_driver.bConfigurationValue = 2;
device_desc.bDeviceClass = USB_CLASS_COMM;
device_desc.idProduct =
cpu_to_le16(GS_CDC_PRODUCT_ID);
- } else if (use_obex) {
+ }
+#ifdef HAVE_OBEX
+ else if (use_obex) {
serial_config_driver.label = "CDC OBEX config";
serial_config_driver.bConfigurationValue = 3;
device_desc.bDeviceClass = USB_CLASS_COMM;
device_desc.idProduct =
cpu_to_le16(GS_CDC_OBEX_PRODUCT_ID);
- } else {
+ }
+#endif
+ else {
serial_config_driver.label = "Generic Serial config";
serial_config_driver.bConfigurationValue = 1;
device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
@@ -207,8 +236,17 @@ static int __init gserial_init(void)
cpu_to_le16(GS_PRODUCT_ID);
}
strings_dev[STRING_DESCRIPTION_IDX].s = serial_config_driver.label;
+ if (pdata->idVendor)
+ device_desc.idVendor = pdata->idVendor;
+ if (pdata->idProduct)
+ device_desc.idProduct = pdata->idProduct;
+ strings_dev[STRING_MANUFACTURER_IDX].s = pdata->manufacturer;
+ strings_dev[STRING_PRODUCT_IDX].s = pdata->productname;
return usb_composite_register(&gserial_driver);
}
-late_initcall(gserial_init);
+void usb_serial_unregister(void)
+{
+ usb_composite_unregister(&gserial_driver);
+}
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index 49aedc2..e310c3a 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -20,6 +20,7 @@
#include <common.h>
#include <usb/cdc.h>
#include <kfifo.h>
+#include <clock.h>
#include "u_serial.h"
@@ -107,8 +108,6 @@ static unsigned n_ports;
#define GS_CLOSE_TIMEOUT 15 /* seconds */
-
-
#ifdef VERBOSE_DEBUG
#define pr_vdebug(fmt, arg...) \
pr_debug(fmt, ##arg)
@@ -370,6 +369,7 @@ static void serial_putc(struct console_device *cdev, char c)
struct usb_ep *in;
struct usb_request *req;
int status;
+ uint64_t to;
if (list_empty(pool))
return;
@@ -382,8 +382,12 @@ static void serial_putc(struct console_device *cdev, char c)
*(unsigned char *)req->buf = c;
status = usb_ep_queue(in, req);
- while (status >= 0 && list_empty(pool))
+ to = get_time_ns();
+ while (status >= 0 && list_empty(pool)) {
status = usb_gadget_poll();
+ if (is_timeout(to, 300 * MSECOND))
+ break;
+ }
}
static int serial_tstc(struct console_device *cdev)
@@ -399,11 +403,16 @@ static int serial_getc(struct console_device *cdev)
struct gs_port *port = container_of(cdev,
struct gs_port, cdev);
unsigned char ch;
+ uint64_t to;
if (!port->port_usb)
return -EIO;
- while (kfifo_getc(port->recv_fifo, &ch))
+ to = get_time_ns();
+ while (kfifo_getc(port->recv_fifo, &ch)) {
usb_gadget_poll();
+ if (is_timeout(to, 300 * MSECOND))
+ break;
+ }
return ch;
}
@@ -420,8 +429,6 @@ int gserial_connect(struct gserial *gser, u8 port_num)
int status;
struct console_device *cdev;
- printf("%s %p %d\n", __func__, gser, port_num);
-
/* we "know" gserial_cleanup() hasn't been called */
port = ports[port_num].port;
@@ -451,7 +458,7 @@ int gserial_connect(struct gserial *gser, u8 port_num)
port->recv_fifo = kfifo_alloc(1024);
- printf("gserial_connect: start ttyGS%d\n", port->port_num);
+ /*printf("gserial_connect: start ttyGS%d\n", port->port_num);*/
gs_start_io(port);
if (gser->connect)
gser->connect(gser);
@@ -508,7 +515,6 @@ void gserial_disconnect(struct gserial *gser)
struct gs_port *port = gser->ioport;
struct console_device *cdev;
- printf("%s\n", __func__);
if (!port)
return;
diff --git a/include/usb/usbserial.h b/include/usb/usbserial.h
new file mode 100644
index 0000000..43c839c
--- /dev/null
+++ b/include/usb/usbserial.h
@@ -0,0 +1,19 @@
+#ifndef _USB_SERIAL_H
+#define _USB_SERIAL_H
+
+struct usb_serial_pdata {
+ char *manufacturer;
+ char *productname;
+ u16 idVendor;
+ u16 idProduct;
+ int mode;
+};
+
+int usb_serial_register(struct usb_serial_pdata *pdata);
+void usb_serial_unregister(void);
+
+/* OBEX support is missing in barebox */
+/* #define HAVE_OBEX */
+
+#endif /* _USB_SERIAL_H */
+
--
1.7.7.5
More information about the barebox
mailing list