[PATCH] omap3 towards thumb2 support

[Premi, Sanjeev]

> -----Original Message-----
> From: Sascha Hauer [mailto:s.hauer at pengutronix.de] 
> Sent: Monday, January 16, 2012 5:22 PM
> To: Premi, Sanjeev
> Cc: barebox at lists.infradead.org
> Subject: Re: [PATCH] omap3 towards thumb2 support
> 
> On Mon, Jan 16, 2012 at 11:30:23AM +0000, Premi, Sanjeev wrote:
> > > -----Original Message-----
> > > From: barebox-bounces at lists.infradead.org 
> > > [mailto:barebox-bounces at lists.infradead.org] On Behalf Of 
> Sascha Hauer
> > > Sent: Monday, January 16, 2012 3:48 PM
> > > To: barebox at lists.infradead.org
> > > Subject: [PATCH] omap3 towards thumb2 support
> > > 
> > > The following patches rework the omap3 support to be thumb2 safe.
> > > The initialisation order is changed so that more stuff can be
> > > done in a regular C environment rather than in lowlevel time.
> > > 
> > > Together with git://git.pengutronix.de/git/barebox.git work/thumb2
> > > the beagle board Xload config now fits into 34k.
> > > 
> > > The following changes since commit 
> > > be07ecb5c50e007d71f75145938c66bd04960b43:
> > > 
> > >   omap343xdsp: move to arch/arm/boards/omap343xdsp 
> > > (2012-01-16 10:28:00 +0100)
> > > 
> > > are available in the git repository at:
> > >   git://git.pengutronix.de/git/barebox.git work/omap3
> > > 
> > > Sascha Hauer (10):
> > 
> > I was able to pull in your branch and encountered a minor
> > issue - fixed by the patch at end of this mail.
> > 
> > How can I enable thumb2? Didn't find aything obvious in
> > omap3530_beagle_xload_defconfig.
> 
> Did you merge the work/thumb2 branch into your branch? Then you should
> find THUMB2_BAREBOX in menuconfig.

Found it. I was searching in a "cached" version of the file already
in my editor. Will try immediately.

~sanjeev

> 
> > 
> > ~sanjeev
> > 
> > From 60293bdf05090245456931061895470a8900ca9d Mon Sep 17 
> 00:00:00 2001
> > From: Sanjeev Premi <premi at ti.com>
> > Date: Mon, 16 Jan 2012 16:51:04 +0530
> > Subject: [PATCH] ARM OMAP3: Fix compile errors
> > 
> > Encountered this error wile compiling for omap3evm:
> >   CC      arch/arm/boards/omap3evm/board.o
> > arch/arm/boards/omap3evm/board.c:62:24: fatal error:
> >  mach/board.h: No such file or directory compilation terminated.
> > 
> > File mach/board.h doesn't exist since this commit:
> >   be2559e : ARM omap3: move board_init to pure_initcall
> > 
> > Fixed the same for omap343xsdp as well.
> 
> Thanks for catching this. Will update my series.
> 
> Sascha
> 
> 
> -- 
> Pengutronix e.K.                           |                  
>            |
> Industrial Linux Solutions                 | 
> http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: 
> +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   
> +49-5121-206917-5555 |
>