[PATCH 1/2 v2] at91rm9200: fix lowlovel init PIOC base

[Sascha Hauer]

On Wed, Jan 04, 2012 at 07:08:59PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>

Missed v2, used this one instead.

Sascha

> ---
>  arch/arm/mach-at91/at91rm9200_lowlevel_init.c |    6 +-
>  2 files changed, 44 insertions(+), 14 deletions(-)
> 
> diff --git a/arch/arm/mach-at91/at91rm9200_lowlevel_init.c b/arch/arm/mach-at91/at91rm9200_lowlevel_init.c
> index 8d9ae08..dc54bcf 100644
> --- a/arch/arm/mach-at91/at91rm9200_lowlevel_init.c
> +++ b/arch/arm/mach-at91/at91rm9200_lowlevel_init.c
> @@ -101,11 +101,11 @@ void __naked __bare_init board_init_lowlevel(void)
>  	 */
>  
>  	/* PIOC_ASR: Configure PIOC as peripheral (D16/D31) */
> -	at91_sys_write(AT91_PIOC + PIO_ASR, CONFIG_SYS_PIOC_ASR_VAL);
> +	__raw_writel(CONFIG_SYS_PIOC_ASR_VAL, AT91_BASE_PIOC + PIO_ASR);
>  	/* PIOC_BSR */
> -	at91_sys_write(AT91_PIOC + PIO_BSR, CONFIG_SYS_PIOC_BSR_VAL);
> +	__raw_writel(CONFIG_SYS_PIOC_BSR_VAL, AT91_BASE_PIOC + PIO_BSR);
>  	/* PIOC_PDR */
> -	at91_sys_write(AT91_PIOC + PIO_PDR, CONFIG_SYS_PIOC_PDR_VAL);
> +	__raw_writel(CONFIG_SYS_PIOC_PDR_VAL, AT91_BASE_PIOC + PIO_PDR);
>  
>  	/* EBI_CSA : CS1=SDRAM */
>  	at91_sys_write(AT91_EBI_CSA, CONFIG_SYS_EBI_CSA_VAL);
> -- 
> 1.7.7
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |