February 2017 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed Feb 1 00:21:00 PST 2017
Ending: Tue Feb 28 23:32:57 PST 2017
Messages: 261

• QCA988X firmware pull-push support   Sergey Ryazanov
• 9984 VHT   Ben Greear
  • 9984 VHT   Sebastian Gottschall
    • 9984 VHT   Ben Greear
      • 9984 VHT   Ben Greear
      • 9984 VHT   Sebastian Gottschall
      • 9984 VHT   Ben Greear
      • 9984 VHT   Sebastian Gottschall
      • 9984 VHT   Ben Greear
      • 9984 VHT   Sebastian Gottschall
      • 9984 VHT   Ben Greear
      • 9984 VHT   Sebastian Gottschall
      • 9984 VHT   Ben Greear
      • 9984 VHT   Sebastian Gottschall
      • 9984 VHT   Ben Greear
      • 9984 VHT   Sebastian Gottschall
      • 9984 VHT   Sebastian Gottschall
      • 9984 VHT   Valo, Kalle
      • 9984 VHT   Sebastian Gottschall
      • 9984 VHT   Valo, Kalle
      • 9984 VHT   Valo, Kalle
      • 9984 VHT   Sebastian Gottschall
      • 9984 VHT   Adrian Chadd
      • 9984 VHT   Sebastian Gottschall
      • 9984 VHT   Adrian Chadd
      • 9984 VHT   Valo, Kalle
• [PATCH v2 1/2] cfg80211: Add support to set tx power for a station associated   Ashok Raj Nagarajan
  • [PATCH v2 1/2] cfg80211: Add support to set tx power for a station associated   Ben Greear
    • [PATCH v2 1/2] cfg80211: Add support to set tx power for a station associated   Ashok Raj Nagarajan
      • [PATCH v2 1/2] cfg80211: Add support to set tx power for a station associated   Ben Greear
      • [PATCH v2 1/2] cfg80211: Add support to set tx power for a station associated   Johannes Berg
• [PATCH v2 2/2] mac80211: store tx power value from user to station   Ashok Raj Nagarajan
  • [PATCH v2 2/2] mac80211: store tx power value from user to station   Ben Greear
    • [PATCH v2 2/2] mac80211: store tx power value from user to station   Ashok Raj Nagarajan
• [PATCH v2] ath10k: add support for controlling tx power to a station   Ashok Raj Nagarajan
  • [PATCH v2] ath10k: add support for controlling tx power to a station   Ben Greear
  • [PATCH v2] ath10k: add support for controlling tx power to a station   Valo, Kalle
• firmware register dump description   Sergey Stepanov
  • firmware register dump description   Ben Greear
• Recent driver changes destabilized QCA9377 connection quality   Valo, Kalle
  • Recent driver changes destabilized QCA9377 connection quality   Tobias Predel
    • Recent driver changes destabilized QCA9377 connection quality   Mohammed Shafi Shajakhan
    • Recent driver changes destabilized QCA9377 connection quality   Michal Kazior
      • Recent driver changes destabilized QCA9377 connection quality   Tobias Predel
• [PATCH 1/3] ath10k: remove ath10k_vif_to_arvif()   Amadeusz Sławiński
  • [PATCH 1/3] ath10k: remove ath10k_vif_to_arvif()   Adrian Chadd
    • [PATCH 1/3] ath10k: remove ath10k_vif_to_arvif()   Valo, Kalle
      • [PATCH 1/3] ath10k: remove ath10k_vif_to_arvif()   Ben Greear
      • [PATCH 1/3] ath10k: remove ath10k_vif_to_arvif()   Valo, Kalle
      • [PATCH 1/3] ath10k: remove ath10k_vif_to_arvif()   Adrian Chadd
      • [PATCH 1/3] ath10k: remove ath10k_vif_to_arvif()   Joe Perches
      • [PATCH 1/3] ath10k: remove ath10k_vif_to_arvif()   Adrian Chadd
      • [PATCH 1/3] ath10k: remove ath10k_vif_to_arvif()   Ben Greear
  • [1/3] ath10k: remove ath10k_vif_to_arvif()   Kalle Valo
• [PATCH 2/3] ath10k: use size_t for len variables   Amadeusz Sławiński
  • [PATCH 2/3] ath10k: use size_t for len variables   Sebastian Gottschall
• [PATCH 3/3] ath10k: fix comment   Amadeusz Sławiński
• [PATCH 1/3] ath10k: prefer unsigned int over just unsigned   Kalle Valo
  • [PATCH 2/3] ath10k: use names in function definition arguments   Kalle Valo
  • [PATCH 3/3] ath10k: few whitespace fixes   Kalle Valo
  • [1/3] ath10k: prefer unsigned int over just unsigned   Kalle Valo
• [PATCH] ath10k: remove unneeded semicolon   Waldemar Rymarkiewicz
  • ath10k: remove unneeded semicolon   Kalle Valo
• Does ath10k's spectral scan support I/Q or phase-magnitude?   Michael Everett Feder
  • Does ath10k's spectral scan support I/Q or phase-magnitude?   Adrian Chadd
• [PATCH v3] ath10k: Fix crash during rmmod when probe firmware fails   Mohammed Shafi Shajakhan
  • [PATCH v3] ath10k: Fix crash during rmmod when probe firmware fails   Mohammed Shafi Shajakhan
    • [PATCH v3] ath10k: Fix crash during rmmod when probe firmware fails   Michael Ney
      • [PATCH v3] ath10k: Fix crash during rmmod when probe firmware fails   Shajakhan, Mohammed Shafi (Mohammed Shafi)
    • [PATCH v3] ath10k: Fix crash during rmmod when probe firmware fails   Valo, Kalle
      • [PATCH v3] ath10k: Fix crash during rmmod when probe firmware fails   Valo, Kalle
      • [PATCH v3] ath10k: Fix crash during rmmod when probe firmware fails   Shajakhan, Mohammed Shafi (Mohammed Shafi)
• Incomplete scan results after rf(un)kill   Daniel J Blueman
• ath10k: Add debugfs support to get per peer tids log via tracing   Kalle Valo
• [PATCHv3] ath10k: fix boot failure in UTF mode/testmode   Kalle Valo
• ath10k: fix reading sram contents for QCA4019   Kalle Valo
• QCA4019 firmware: wrong numChain setting for bmi-board 16+17   Sven Eckelmann
• QCA4019: calibration files and board files   Sven Eckelmann
  • QCA4019: calibration files and board files   akolli at codeaurora.org
    • QCA4019: calibration files and board files   Adrian Chadd
    • QCA4019: calibration files and board files   Sven Eckelmann
      • QCA4019: calibration files and board files   Rajkumar Manoharan
      • QCA4019: calibration files and board files   Sven Eckelmann
• [PATCH v3 1/2] cfg80211: Add support to set tx power for a station associated   Ashok Raj Nagarajan
  • [PATCH v3 1/2] cfg80211: Add support to set tx power for a station associated   Johannes Berg
• [PATCH v3 2/2] mac80211: store tx power value from user to station   Ashok Raj Nagarajan
  • [PATCH v3 2/2] mac80211: store tx power value from user to station   Johannes Berg
• [PATCH v3] ath10k: add support for controlling tx power to a station   Ashok Raj Nagarajan
  • [PATCH v3] ath10k: add support for controlling tx power to a station   kbuild test robot
  • [PATCH v3] ath10k: add support for controlling tx power to a station   kbuild test robot
    • [PATCH v3] ath10k: add support for controlling tx power to a station   Valo, Kalle
  • [PATCH v3] ath10k: add support for controlling tx power to a station   Johannes Berg
• [PATCH v3] iw: Add support for controlling tx power for per station   Ashok Raj Nagarajan
  • [PATCH v3] iw: Add support for controlling tx power for per station   Johannes Berg
• QCA9880 3x3 80Mhz low performance   Phyu The
  • QCA9880 3x3 80Mhz low performance   Ben Greear
    • QCA9880 3x3 80Mhz low performance   Phyu The
      • QCA9880 3x3 80Mhz low performance   Ben Greear
      • QCA9880 3x3 80Mhz low performance   Phyu The
      • QCA9880 3x3 80Mhz low performance   Ben Greear
• [PATCH v4] ath10k: fix napi crash during rmmod when probe firmware fails   Kalle Valo
  • [v4] ath10k: fix napi crash during rmmod when probe firmware fails   Kalle Valo
  • [v4] ath10k: fix napi crash during rmmod when probe firmware fails   Kalle Valo
• [PATCH v2 0/4] ath10k: silence firmware file probing warnings   Kalle Valo
  • [PATCH v2 1/4] ath10k: fetch firmware images in a loop   Kalle Valo
    • [v2,1/4] ath10k: fetch firmware images in a loop   Kalle Valo
  • [PATCH v2 2/4] ath10k: add directory to board data error message   Kalle Valo
  • [PATCH v2 3/4] ath10k: silence firmware file probing warnings   Kalle Valo
  • [PATCH v2 4/4] ath10k: convert warning about non-existent OTP board id to debug message   Kalle Valo
• [RFC,04/10] ath10k: new fw fetch functionality   Kalle Valo
• peer_bw_rxnss_override for 160Mhz   Ben Greear
• [PATCH] ath10k: fix the garage chars in board file name creation   ryanhsu at qca.qualcomm.com
  • ath10k: fix the garage chars in board file name creation   Kalle Valo
• VHT 160Mhz and nss related config.   Ben Greear
  • VHT 160Mhz and nss related config.   Ben Greear
  • VHT 160Mhz and nss related config.   Sebastian Gottschall
    • VHT 160Mhz and nss related config.   Adrian Chadd
      • VHT 160Mhz and nss related config.   Ben Greear
      • VHT 160Mhz and nss related config.   Sebastian Gottschall
      • VHT 160Mhz and nss related config.   Ben Greear
      • VHT 160Mhz and nss related config.   Sebastian Gottschall
      • VHT 160Mhz and nss related config.   Ben Greear
      • VHT 160Mhz and nss related config.   Sebastian Gottschall
      • VHT 160Mhz and nss related config.   Ben Greear
      • VHT 160Mhz and nss related config.   Sebastian Gottschall
      • VHT 160Mhz and nss related config.   Sebastian Gottschall
      • VHT 160Mhz and nss related config.   Ben Greear
      • VHT 160Mhz and nss related config.   Sebastian Gottschall
  • VHT 160Mhz and nss related config.   Johannes Berg
    • VHT 160Mhz and nss related config.   Ben Greear
      • VHT 160Mhz and nss related config.   Adrian Chadd
      • VHT 160Mhz and nss related config.   Johannes Berg
      • VHT 160Mhz and nss related config.   Ben Greear
      • VHT 160Mhz and nss related config.   Johannes Berg
• [PATCH] ath10k: Configure rxnss_override for 10.4 firmware.   greearb at candelatech.com
  • ath10k: Configure rxnss_override for 10.4 firmware.   Kalle Valo
• Re: All '0' in agg_status   Kwang Min Kim
  • All '0' in agg_status   Valo, Kalle
    • Re: All '0' in agg_status   Kwang Min Kim
• ath10k QCA988x firmware not supporting monitor mode   Diganta Jena
  • ath10k QCA988x firmware not supporting monitor mode   KAVITA MATHUR
    • ath10k QCA988x firmware not supporting monitor mode   Mohammed Shafi Shajakhan
• Suspend resume broken since 4.9   Valo, Kalle
  • Suspend resume broken since 4.9   Enrico Tagliavini
    • Suspend resume broken since 4.9   Enrico Tagliavini
• [PATCH 1/2] ath10k: improve the firmware download time for QCA6174   ryanhsu at qca.qualcomm.com
  • [PATCH 1/2] ath10k: improve the firmware download time for QCA6174   kbuild test robot
• [PATCH 2/2] ath10k: improve the firmware download time for QCA9377   ryanhsu at qca.qualcomm.com
• [PATCH v2 1/2] ath10k: improve the firmware download time for QCA6174   ryanhsu at qca.qualcomm.com
• [PATCH v2 2/2] ath10k: improve the firmware download time for QCA9377   ryanhsu at qca.qualcomm.com
• ath10k: MESH points are associated ,but not pinging each other   kavitam
  • ath10k: MESH points are associated ,but not pinging each other   Valo, Kalle
    • ath10k: MESH points are associated ,but not pinging each other   kavitam
      • ath10k: MESH points are associated ,but not pinging each other   Valo, Kalle
• [PATCH] ath10k: Fix a warning during channel switch with multiple vaps   Mohammed Shafi Shajakhan
• [PATCH v2] ath10k: Fix a warning during channel switch with multiple vaps   Mohammed Shafi Shajakhan
• [RFC v3 0/8] ath10k sdio support   Valo, Kalle
  • [RFC v3 0/8] ath10k sdio support   Erik Stromdahl
    • [RFC v3 0/8] ath10k sdio support   Valo, Kalle
      • [RFC v3 0/8] ath10k sdio support   Valo, Kalle
      • [RFC v3 0/8] ath10k sdio support   Erik Stromdahl
      • [RFC v3 0/8] ath10k sdio support   Valo, Kalle
  • [RFC v3 0/8] ath10k sdio support   Erik Stromdahl
    • [RFC v3 0/8] ath10k sdio support   Valo, Kalle
      • [RFC v3 0/8] ath10k sdio support   Erik Stromdahl
• Performance issue with QCA9377   Hugo Poissonnet
• ath10k support AP+ADHOC on single radio   dineshkumar parameswaran
• who care of addba/delba in ath10k?   KwangMin Kim
  • who care of addba/delba in ath10k?   Kwang Min Kim
    • RE: who care of addba/delba in ath10k?   Kwang Min Kim
      • who care of addba/delba in ath10k?   Ben Greear
  • who care of addba/delba in ath10k?   Shajakhan, Mohammed Shafi (Mohammed Shafi)
    • who care of addba/delba in ath10k?   Ben Greear
  • Re: who care of addba/delba in ath10k?   KwangMin Kim
• [PATCHv2] ath10k: Update available channel list for 5G radio   c_traja at qti.qualcomm.com
  • [PATCHv2] ath10k: Update available channel list for 5G radio   Raja, Tamizh Chelvam
  • [PATCHv2] ath10k: Update available channel list for 5G radio   c_traja at qti.qualcomm.com
• [PATCH] ath10k: Update available channel list for 5G radio   c_traja at qti.qualcomm.com
  • [PATCH] ath10k: Update available channel list for 5G radio   Adrian Chadd
  • [PATCH] ath10k: Update available channel list for 5G radio   Rafał Miłecki
• ath10k: MAC Address   K.Mani
  • ath10k: MAC Address   Sebastian Gottschall
• [4.9.10] ath10k workqueue warnings   Daniel J Blueman
  • [4.9.10] ath10k workqueue warnings   Shajakhan, Mohammed Shafi (Mohammed Shafi)
    • [4.9.10] ath10k workqueue warnings   Daniel J Blueman
• [PATCH] ath10k: fix block comments style   Marcin Rokicki
  • [PATCH] ath10k: fix block comments style   Shajakhan, Mohammed Shafi (Mohammed Shafi)
    • [PATCH] ath10k: fix block comments style   Valo, Kalle
• [PATCH] ath10k: use octal permission representation   Marcin Rokicki
• [PATCH] ath10k: Clean header files from bad block comments   Marcin Rokicki
• [PATCH] ath10k: Remove return statement from a void function   Marcin Rokicki
  • [PATCH] ath10k: Remove return statement from a void function   Arend Van Spriel
• ath10k regression on XPS13   Kalle Valo
  • ath10k regression on XPS13   David Miller
    • ath10k regression on XPS13   Kalle Valo
      • ath10k regression on XPS13   David Miller
      • ath10k regression on XPS13   Kalle Valo
      • ath10k regression on XPS13   David Miller
    • ath10k regression on XPS13   Linus Torvalds
      • ath10k regression on XPS13   David Miller
• [PATCH v2] ath10k: Remove return statement from a void function   Marcin Rokicki
  • [PATCH v2] ath10k: Remove return statement from a void function   Arend Van Spriel
    • [PATCH v2] ath10k: Remove return statement from a void function   Joe Perches
• Driver support for QCA6174 chip using SDIO interface   Akesh M Chacko
  • Driver support for QCA6174 chip using SDIO interface   Erik Stromdahl
    • Driver support for QCA6174 chip using SDIO interface   Akesh M Chacko
      • Driver support for QCA6174 chip using SDIO interface   Erik Stromdahl
• [OpenWrt-Devel] ATH10K VLAN firmware issue   Valo, Kalle
  • [OpenWrt-Devel] ATH10K VLAN firmware issue   voncken
  • [OpenWrt-Devel] ATH10K VLAN firmware issue   Bruno Antunes
  • [OpenWrt-Devel] ATH10K VLAN firmware issue   voncken
• [RFC v4 00/21] ath10k sdio and usb support   Erik Stromdahl
  • [RFC v4 02/21] ath10k: htc: rx trailer lookahead support   Erik Stromdahl
  • [RFC v4 03/21] ath10k: htc: move htc ctrl ep connect to htc_init   Erik Stromdahl
  • [RFC v4 05/21] ath10k: various sdio related definitions   Erik Stromdahl
  • [RFC v4 06/21] ath10k: sdio support   Erik Stromdahl
  • [RFC v4 07/21] ath10k: add sdio extra initializations   Erik Stromdahl
  • [RFC v4 08/21] ath10k: sdio get target info   Erik Stromdahl
  • [RFC v4 09/21] ath10k: htc: ready_ext msg support   Erik Stromdahl
  • [RFC v4 10/21] ath10k: various usb related definitions   Erik Stromdahl
  • [RFC v4 11/21] ath10k: usb support   Erik Stromdahl
  • [RFC v4 12/21] ath10k: high_latency detection   Erik Stromdahl
  • [RFC v4 13/21] ath10k: different fw file names for usb and sdio   Erik Stromdahl
  • [RFC v4 14/21] ath10k: htt: RX ring config HL support   Erik Stromdahl
  • [RFC v4 15/21] ath10k: per target configurablity of various items   Erik Stromdahl
  • [RFC v4 16/21] ath10k: add start_once support   Erik Stromdahl
  • [RFC v4 17/21] ath10k: htt: High latency TX support   Erik Stromdahl
  • [RFC v4 18/21] ath10k: htt: High latency RX support   Erik Stromdahl
  • [RFC v4 19/21] ath10k: add QCA9377 usb hw_param item   Erik Stromdahl
  • [RFC v4 20/21] ath10k: add QCA9377 sdio hw_param item   Erik Stromdahl
  • [RFC v4 21/21] ath10k: dma fixes for high latency devices   Erik Stromdahl
• [RFC v4 01/21] ath10k: htc: made static function public   Erik Stromdahl
• [RFC v4 04/21] ath10k: htc: refactorization   Erik Stromdahl
• [PATCH] Revert "ath10k: Search SMBIOS for OEM board file extension"   Kalle Valo
  • [PATCH] Revert "ath10k: Search SMBIOS for OEM board file extension"   David Miller
• [PATCH] ath10k: Modify macros to fix style issues   Marcin Rokicki
  • [PATCH] ath10k: Modify macros to fix style issues   Joe Perches
    • [PATCH] ath10k: Modify macros to fix style issues   Joe Perches
• [PATCH] ath10k: Disallow DFS simulation if DFS channel is not enabled   Mohammed Shafi Shajakhan
• ath10k - spectral scan - and - channel change   Will Kerr
• [PATCHv2 0/4] cfg80211: mac80211: BTCOEX feature support   c_traja at qti.qualcomm.com
  • [PATCHv2 1/4] cfg80211: Add support to enable or disable btcoex   c_traja at qti.qualcomm.com
    • [PATCHv2 1/4] cfg80211: Add support to enable or disable btcoex   kbuild test robot
    • [PATCHv2 1/4] cfg80211: Add support to enable or disable btcoex   kbuild test robot
  • [PATCHv2 2/4] mac80211: Add support to enable or disable btcoex   c_traja at qti.qualcomm.com
  • [PATCHv2 3/4] cfg80211: Add Support set btcoex priority value   c_traja at qti.qualcomm.com
    • [PATCHv2 3/4] cfg80211: Add Support set btcoex priority value   kbuild test robot
  • [PATCHv2 4/4] mac80211: Add support to set/update btcoex priority value   c_traja at qti.qualcomm.com
  • [PATCHv2 0/4] cfg80211: mac80211: BTCOEX feature support   Arend Van Spriel
    • [PATCHv2 0/4] cfg80211: mac80211: BTCOEX feature support   Raja, Tamizh Chelvam
• 4.9 Kernel panic on ACS and intermittent ability to host AP   Chris Price
  • 4.9 Kernel panic on ACS and intermittent ability to host AP   Hsu, Ryan
• [PATCH] ath10k: remove redundant error check   Colin King
• QCA9880 slow performance adhoc/IBSS mode   Ralph Houthoofdt
  • QCA9880 slow performance adhoc/IBSS mode   Ben Greear
    • QCA9880 slow performance adhoc/IBSS mode   Ralph Houthoofdt
      • QCA9880 slow performance adhoc/IBSS mode   Ben Greear
      • QCA9880 slow performance adhoc/IBSS mode   Ralph Houthoofdt
      • QCA9880 slow performance adhoc/IBSS mode   Ben Greear
      • QCA9880 slow performance adhoc/IBSS mode   Ralph Houthoofdt
      • QCA9880 slow performance adhoc/IBSS mode   Ben Greear

Last message date: Tue Feb 28 23:32:57 PST 2017
Archived on: Mon Mar 6 05:42:26 PST 2017

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...