Re: who care of addba/delba in ath10k?

[KwangMin Kim]

Thank you for your reply.

OK, I know.

If so, will the bit-rate be lower if all (the station side)TIDs are closed? 

Thanks.

-----

Kim Kwang Min

Mobile +82 010-5521-6393 
Mail gwondori at nimbus.kr 






>-----Original Message-----
>From: "Ben Greear"<greearb at candelatech.com> 
>To: "Kwang Min Kim"<gwondori at nimbus.kr>; 
>Cc: <ath10k at lists.infradead.org>; <mohammed at qti.qualcomm.com>; 
>Sent: 2017-02-23 (목) 23:43:00
>Subject: Re: who care of addba/delba in ath10k?
> 
>Well, block-ack seems to work for me, so I assume it is working properly...
>
>Thanks,
>Ben
>
>On 02/21/2017 08:39 PM, Kwang Min Kim wrote:
>> Thank you for your reply.
>>
>> I will ask another question...
>>
>> When debugging from "ath10k HTT", I usually see ADDBA requests coming when "associated" is finish.
>>
>> But very rarely, after "associated" completion, I could see the following behavior.
>>
>> Associated -> ADDBA -> DELBA -> ADDBA -> DELBA
>>
>> Is this normal case?
>>
>> Thanks.
>>
>> -----
>>
>> Kim Kwang Min
>>
>> Mobile +82 010-5521-6393
>> Mail gwondori at nimbus.kr
>>
>>
>>
>>
>>
>> -----Original Message-----
>> From: "Ben Greear"<greearb at candelatech.com>
>> To: "Shajakhan, Mohammed Shafi (Mohammed Shafi)"<mohammed at qti.qualcomm.com>; "ath10k at lists.infradead.org"<ath10k at lists.infradead.org>; >"KwangMin Kim"<kim25444 at naver.com>;
>> Cc: "gwondori at nimbus.kr"<gwondori at nimbus.kr>;
>> Sent: 2017-02-21 (화) 02:50:44
>> Subject: Re: who care of addba/delba in ath10k?
>>
>> Yes, it is in firmware.
>>
>> Thanks,
>> Ben
>>
>> On 02/20/2017 06:37 AM, Shajakhan, Mohammed Shafi (Mohammed Shafi) wrote:
>>> I think that ath10k's addba / delba is doing firmware. Is this right?
>>>
>>> [shafi] http://lxr.free-electrons.com/source/drivers/net/wireless/ath/ath10k/debugfs_sta.c#L144
>>> yes WMI command is sent to f/w
>>> _______________________________________________
>>> ath10k mailing list
>>> ath10k at lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/ath10k
>>>
>>
>>
>>
>>
>> _______________________________________________
>> ath10k mailing list
>> ath10k at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/ath10k
>>
>
>-- 
>Ben Greear <greearb at candelatech.com>
>Candela Technologies Inc  http://www.candelatech.com
>
>
>
>
>-----Original Message-----
>From: "KwangMin Kim"<kim25444 at naver.com> 
>To: <ath10k at lists.infradead.org>; 
>Cc: <gwondori at nimbus.kr>; 
>Sent: 2017-02-19 (일) 17:30:41
>Subject: who care of addba/delba in ath10k?
> 
>I think that ath10k's addba / delba is doing firmware. Is this right?
>
>And I have another question.
>
>If wmm is on, should TID '0' in agg_status (debugfs on mac80211) always be on?
>
>Thanks.
>
>-----
>
>Kwang-Min Kim(kim25444 at naver.com)
>
>+82 10-5521-6393