[PATCHv3] ath10k: fix boot failure in UTF mode/testmode

[Kalle Valo]

c_traja at qti.qualcomm.com wrote:
> From: Tamizh chelvam <c_traja at qti.qualcomm.com>
> 
> Rx filter reset and the dynamic tx switch mode (EXT_RESOURCE_CFG)
> configuration are causing the following errors when UTF firmware
> is loaded to the target.
> 
> Error message 1:
> [ 598.015629] ath10k_pci 0001:01:00.0: failed to ping firmware: -110
> [ 598.020828] ath10k_pci 0001:01:00.0: failed to reset rx filter: -110
> [ 598.141556] ath10k_pci 0001:01:00.0: failed to start core (testmode): -110
> 
> Error message 2:
> [ 668.615839] ath10k_ahb a000000.wifi: failed to send ext resource cfg command : -95
> [ 668.618902] ath10k_ahb a000000.wifi: failed to start core (testmode): -95
> 
> Avoiding these configurations while bringing the target in
> testmode is solving the problem.
> 
> Cc: stable at vger.kernel.org
> Signed-off-by: Tamizh chelvam <c_traja at qti.qualcomm.com>

Patch applied to ath-next branch of ath.git, thanks.

cb4281528b62 ath10k: fix boot failure in UTF mode/testmode

-- 
https://patchwork.kernel.org/patch/9546451/

Documentation about submitting wireless patches and checking status
from patchwork:

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches