[RFC v4 15/21] ath10k: per target configurablity of various items
Erik Stromdahl
erik.stromdahl at gmail.com
Tue Feb 21 08:15:35 PST 2017
Added ability to set bus type and configure the max number of
peers in the ath10k_hw_params struct.
With this functionality it is possible to have a different
hw configuration depending on bus type for the same radio
chipset.
E.g. SDIO and USB devices using the same chipset as PCIe
devices will potentially use different board files and perhaps
other configuration parameters.
One such parameter is the max number of peers.
Instead of using a default value (suitable for PCIe devices)
derived from the WMI op version, a per target value can be
used instead.
This is needed by the QCA9377 USB device in order to prevent
the target fw to crash after HTT RX ring cfg is issued.
Apparently, the QCA9377 HL device does not seem to handle the
same amount of peers as the LL devices.
Signed-off-by: Erik Stromdahl <erik.stromdahl at gmail.com>
---
drivers/net/wireless/ath/ath10k/core.c | 33 +++++++++++++++++++++++--------
drivers/net/wireless/ath/ath10k/core.h | 7 -------
drivers/net/wireless/ath/ath10k/hw.h | 22 +++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 4 ++--
4 files changed, 49 insertions(+), 17 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 9d60f4b..6b667c7 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -1592,9 +1592,19 @@ static int ath10k_init_hw_params(struct ath10k *ar)
for (i = 0; i < ARRAY_SIZE(ath10k_hw_params_list); i++) {
hw_params = &ath10k_hw_params_list[i];
- if (hw_params->id == ar->target_version &&
- hw_params->dev_id == ar->dev_id)
- break;
+ if (ar->is_high_latency) {
+ /* High latency devices will use different fw depending
+ * on if it is a USB or SDIO device.
+ */
+ if (hw_params->bus == ar->hif.bus &&
+ hw_params->id == ar->target_version &&
+ hw_params->dev_id == ar->dev_id)
+ break;
+ } else {
+ if (hw_params->id == ar->target_version &&
+ hw_params->dev_id == ar->dev_id)
+ break;
+ }
}
if (i == ARRAY_SIZE(ath10k_hw_params_list)) {
@@ -1685,6 +1695,7 @@ static void ath10k_core_set_coverage_class_work(struct work_struct *work)
static int ath10k_core_init_firmware_features(struct ath10k *ar)
{
struct ath10k_fw_file *fw_file = &ar->normal_mode_fw.fw_file;
+ int max_num_peers;
if (test_bit(ATH10K_FW_FEATURE_WMI_10_2, fw_file->fw_features) &&
!test_bit(ATH10K_FW_FEATURE_WMI_10X, fw_file->fw_features)) {
@@ -1764,7 +1775,7 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
switch (fw_file->wmi_op_version) {
case ATH10K_FW_WMI_OP_VERSION_MAIN:
- ar->max_num_peers = TARGET_NUM_PEERS;
+ max_num_peers = TARGET_NUM_PEERS;
ar->max_num_stations = TARGET_NUM_STATIONS;
ar->max_num_vdevs = TARGET_NUM_VDEVS;
ar->htt.max_num_pending_tx = TARGET_NUM_MSDU_DESC;
@@ -1776,10 +1787,10 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
case ATH10K_FW_WMI_OP_VERSION_10_2:
case ATH10K_FW_WMI_OP_VERSION_10_2_4:
if (ath10k_peer_stats_enabled(ar)) {
- ar->max_num_peers = TARGET_10X_TX_STATS_NUM_PEERS;
+ max_num_peers = TARGET_10X_TX_STATS_NUM_PEERS;
ar->max_num_stations = TARGET_10X_TX_STATS_NUM_STATIONS;
} else {
- ar->max_num_peers = TARGET_10X_NUM_PEERS;
+ max_num_peers = TARGET_10X_NUM_PEERS;
ar->max_num_stations = TARGET_10X_NUM_STATIONS;
}
ar->max_num_vdevs = TARGET_10X_NUM_VDEVS;
@@ -1788,7 +1799,7 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
ar->max_spatial_stream = WMI_MAX_SPATIAL_STREAM;
break;
case ATH10K_FW_WMI_OP_VERSION_TLV:
- ar->max_num_peers = TARGET_TLV_NUM_PEERS;
+ max_num_peers = TARGET_TLV_NUM_PEERS;
ar->max_num_stations = TARGET_TLV_NUM_STATIONS;
ar->max_num_vdevs = TARGET_TLV_NUM_VDEVS;
ar->max_num_tdls_vdevs = TARGET_TLV_NUM_TDLS_VDEVS;
@@ -1799,7 +1810,7 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
ar->max_spatial_stream = WMI_MAX_SPATIAL_STREAM;
break;
case ATH10K_FW_WMI_OP_VERSION_10_4:
- ar->max_num_peers = TARGET_10_4_NUM_PEERS;
+ max_num_peers = TARGET_10_4_NUM_PEERS;
ar->max_num_stations = TARGET_10_4_NUM_STATIONS;
ar->num_active_peers = TARGET_10_4_ACTIVE_PEERS;
ar->max_num_vdevs = TARGET_10_4_NUM_VDEVS;
@@ -1816,10 +1827,16 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
break;
case ATH10K_FW_WMI_OP_VERSION_UNSET:
case ATH10K_FW_WMI_OP_VERSION_MAX:
+ default:
WARN_ON(1);
return -EINVAL;
}
+ if (ar->hw_params.max_num_peers)
+ ar->max_num_peers = ar->hw_params.max_num_peers;
+ else
+ ar->max_num_peers = max_num_peers;
+
/* Backwards compatibility for firmwares without
* ATH10K_FW_IE_HTT_OP_VERSION.
*/
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 0c970fe..e3cdaba 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -88,13 +88,6 @@
struct ath10k;
-enum ath10k_bus {
- ATH10K_BUS_PCI,
- ATH10K_BUS_AHB,
- ATH10K_BUS_SDIO,
- ATH10K_BUS_USB,
-};
-
static inline const char *ath10k_bus_str(enum ath10k_bus bus)
{
switch (bus) {
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 4055144..bc4fd43 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -20,6 +20,13 @@
#include "targaddrs.h"
+enum ath10k_bus {
+ ATH10K_BUS_PCI,
+ ATH10K_BUS_AHB,
+ ATH10K_BUS_SDIO,
+ ATH10K_BUS_USB,
+};
+
#define ATH10K_FW_DIR "ath10k"
#define QCA988X_2_0_DEVICE_ID (0x003c)
@@ -447,6 +454,18 @@ struct ath10k_hw_params {
/* hw specific clock control parameters */
const struct ath10k_hw_clk_params *hw_clk;
int target_cpu_freq;
+
+ /* max_num_peers can be used to override the setting derived from
+ * the WMI op version. If this value is non-zero, it will always
+ * be used instead of the default value derived from the WMI op
+ * version.
+ */
+ int max_num_peers;
+
+ /* Specifies whether or not the device is a high latency device */
+ bool is_high_latency;
+
+ enum ath10k_bus bus;
};
struct htt_rx_desc;
@@ -557,6 +576,9 @@ ath10k_rx_desc_get_l3_pad_bytes(struct ath10k_hw_params *hw,
#define TARGET_TLV_NUM_MSDU_DESC (1024 + 32)
#define TARGET_TLV_NUM_WOW_PATTERNS 22
+/* Target specific defines for QCA9377 high latency firmware */
+#define TARGET_QCA9377_HL_NUM_PEERS 15
+
/* Diagnostic Window */
#define CE_DIAG_PIPE 7
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index f918802..754d445 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -1406,7 +1406,7 @@ static struct sk_buff *ath10k_wmi_tlv_op_gen_init(struct ath10k *ar)
cmd->num_host_mem_chunks = __cpu_to_le32(ar->wmi.num_mem_chunks);
cfg->num_vdevs = __cpu_to_le32(TARGET_TLV_NUM_VDEVS);
- cfg->num_peers = __cpu_to_le32(TARGET_TLV_NUM_PEERS);
+ cfg->num_peers = __cpu_to_le32(ar->max_num_peers);
if (test_bit(WMI_SERVICE_RX_FULL_REORDER, ar->wmi.svc_map)) {
cfg->num_offload_peers = __cpu_to_le32(TARGET_TLV_NUM_VDEVS);
@@ -1417,7 +1417,7 @@ static struct sk_buff *ath10k_wmi_tlv_op_gen_init(struct ath10k *ar)
}
cfg->num_peer_keys = __cpu_to_le32(2);
- cfg->num_tids = __cpu_to_le32(TARGET_TLV_NUM_TIDS);
+ cfg->num_tids = __cpu_to_le32(ar->max_num_peers * 2);
cfg->ast_skid_limit = __cpu_to_le32(0x10);
cfg->tx_chain_mask = __cpu_to_le32(0x7);
cfg->rx_chain_mask = __cpu_to_le32(0x7);
--
2.7.4
More information about the ath10k
mailing list