9984 VHT
Ben Greear
greearb at candelatech.com
Thu Feb 2 08:18:44 PST 2017
On 02/01/2017 10:45 AM, Sebastian Gottschall wrote:
> Am 01.02.2017 um 17:48 schrieb Ben Greear:
>> On 01/30/2017 02:28 AM, Sebastian Gottschall wrote:
>>> Hello
>>>
>>> with recent 9984 firmares vht160 seem to crash the firmware itself for no reason i see.
>>> is there any internal structure change in these newer firmwares we need to consider?
>>> i also tested the even more recent firmware firmware-5.bin_10.4-3.4-00068 from codeaurora. this one doesnt crash but the vdev_start returns with a error
>>>
>>> i compared the more recent wmi headers from the qca drivers, but wasnt able to find anything which could explain the behaviour
>>>
>>> Sebastian
>>>
>>>
>>
>> Hello Sebastian,
>>
>> Could you share the hostapd/supplicant config file you are using?
>>
>> And, what kernel (or backports kernel) are you using? I'd like to
>> see how 160Mhz works on my firmware....
> always state of art for sure
Using a somewhat hacked 4.9.2+ kernel and my CT firmware, I get failure to start CAC:
1486052184.818710: Mode: IEEE 802.11a Channel: 100 Frequency: 5500 MHz
1486052184.818714: DFS 8 channels required radar detection
1486052184.818717: DFS all channels available, (SKIP CAC): no
1486052184.818719: DFS 0 chans unavailable - choose other channel: no
1486052184.818722: vap0: interface state COUNTRY_UPDATE->DFS
1486052184.818725: DFS start CAC on 5500 MHz
1486052184.818733: vap0: DFS-CAC-START freq=5500 chan=100 sec_chan=1, width=2, seg0=114, seg1=0, cac_time=60s
1486052184.818737: nl80211: Start radar detection (CAC) 5500 MHz (ht_enabled=1, vht_enabled=1, bandwidth=160 MHz, cf1=5570 MHz, cf2=0 MHz)
1486052184.818742: * freq=5500
1486052184.818745: * vht_enabled=1
1486052184.818747: * ht_enabled=1
1486052184.818749: * bandwidth=160
1486052184.818751: * channel_width=5
1486052184.818754: * center_freq1=5570
1486052184.818756: * center_freq2=0
1486052184.823437: nl80211: Failed to start radar detection: -16 (Device or resource busy)
1486052184.823444: DFS start_dfs_cac() failed, -1
I'll go dig around to see if I can figure out why...
Thanks,
Ben
--
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc http://www.candelatech.com
More information about the ath10k
mailing list