April 2013 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Mon Apr 1 01:25:11 EDT 2013
Ending: Tue Apr 30 22:07:36 EDT 2013
Messages: 6748

• [BUG] mod/file2alias: build error in devicetable-offsets.c [was: asm/types.h Header file wont get generated while building uImage ?]   Jon Medhurst (Tixy)
• RFC: right way to conditional-ize some macros for LTO   Jon Medhurst (Tixy)
• [PATCH] ARM: kprobes: fix test coverage missing failures   Jon Medhurst (Tixy)
• [PATCH] ARM: kprobes: fix test coverage missing failures   Jon Medhurst (Tixy)
• [PATCH v4 15/15] ARM: vexpress: Select multi-cluster SMP operation if required   Jon Medhurst (Tixy)
• [PATCH v4 15/15] ARM: vexpress: Select multi-cluster SMP operation if required   Jon Medhurst (Tixy)
• [PATCH v4 14/15] ARM: Enable selection of SMP operations at boot time   Jon Medhurst (Tixy)
• [PATCH v4 15/15] ARM: vexpress: Select multi-cluster SMP operation if required   Jon Medhurst (Tixy)
• [PATCH] ARM: make cpu_init() notrace   Jon Medhurst (Tixy)
• [PATCH] ARM: make cpu_init() notrace   Jon Medhurst (Tixy)
• [RFC PATCH] drivers: bus: add ARM CCI support   Jon Medhurst (Tixy)
• [PATCH] mfd: vexpress: Handle pending config transactions   Jon Medhurst (Tixy)
• [PATCH] ARM: make cpu_init() notrace   Jon Medhurst (Tixy)
• [PATCH v2] mfd: vexpress: Handle pending config transactions   Jon Medhurst (Tixy)
• [RFC][PATCH] arm: highmem: Add support for flushing kmap_atomic mappings   Laura Abbott
• [RFC][PATCH] arm: highmem: Add support for flushing kmap_atomic mappings   Laura Abbott
• [RFC PATCHv2 1/2] arm: highmem: Add support for flushing kmap_atomic mappings   Laura Abbott
• [RFC PATCHv2 2/2] mm: highmem: Add definitions for kmap_atomic_flush_unused   Laura Abbott
• [RFC/PATCH v2 2/2] drivers: dma-contiguous: add initialization from device tree   Laura Abbott
• [RFC][PATCH] arm: highmem: Add support for flushing kmap_atomic mappings   Laura Abbott
• [PATCH] arm: mm: Use phys_addr_t properly for ioremap functions   Laura Abbott
• [PATCH] of: Set the DMA mask to 64 bits on ARM LPAE systems   Laura Abbott
• RFC: Unified DMA allocation algorithms   Laura Abbott
• [PATCH] of: Set the DMA mask to 64 bits on ARM LPAE systems   Laura Abbott
• [PATCH] of: Set the DMA mask to 64 bits on ARM LPAE systems   Laura Abbott
• [PATCH v2] of: Set the DMA mask to 64 bits when dma_addr_t is 64-bits   Laura Abbott
• [PATCH v2] of: Set the DMA mask to 64 bits when dma_addr_t is 64-bits   Laura Abbott
• [PATCH V3] of: Set the DMA mask to 64 bits when dma_addr_t is 64-bits   Laura Abbott
• [PATCH v2] mmc: dwmmc: let device core setup the default pin configuration   Thomas Abraham
• [PATCH v3] mmc: dw_mmc: let device core setup the default pin configuration   Thomas Abraham
• [PATCH v4] mmc: dw_mmc: let device core setup the default pin configuration   Thomas Abraham
• [PATCH v3] mmc: dw_mmc: let device core setup the default pin configuration   Thomas Abraham
• [PATCH v3] mmc: dw_mmc: let device core setup the default pin configuration   Thomas Abraham
• [PATCH v4] mmc: dw_mmc: let device core setup the default pin configuration   Thomas Abraham
• [PATCH] ARM: dts: add ohci and ehci controller nodes for Exynos5440 SoC   Thomas Abraham
• [PATCH v4] mmc: dw_mmc: let device core setup the default pin configuration   Thomas Abraham
• [PATCH v5] mmc: dw_mmc: let device core setup the default pin configuration   Thomas Abraham
• [PATCH 3/7] ARM: exynos: add missing properties for combiner IRQs   Thomas Abraham
• [PATCH 1/7] clk: exynos: prepare for multiplatform   Thomas Abraham
• [PATCH 0/2] ARM: Exynos: Add DT based I/O mapping for Chip-ID controller   Thomas Abraham
• [PATCH v2 0/2] ARM: Exynos: Add DT based I/O mapping for Chip-ID controller   Thomas Abraham
• [PATCH v2 1/2] ARM: Exynos: Create virtual I/O mapping for Chip-ID controller using device tree   Thomas Abraham
• [PATCH v2 2/2] ARM: dts: Add chip-id controller node on Exynos4/5 SoC   Thomas Abraham
• [PATCH v3 00/10] ARM: exynos multiplatform series, part 1   Thomas Abraham
• [PATCH] ARM: dts: add pinctrl nodes for Exynos5250 SoC   Thomas Abraham
• [PATCH 1/3] ARM: tegra: pcie: Add tegra3 support   Jay Agarwal
• [PATCH 2/3] ARM: dts: tegra: Correct PCIe entry   Jay Agarwal
• [PATCH 3/3] ARM: dts: tegra: Add PCIe entry for cardhu   Jay Agarwal
• [PATCH 1/3] ARM: tegra: pcie: Add tegra3 support   Jay Agarwal
• [PATCH 2/3] ARM: dts: tegra: Correct PCIe entry   Jay Agarwal
• [PATCH 1/3] ARM: tegra: pcie: Add tegra3 support   Jay Agarwal
• [PATCH 1/3] ARM: tegra: pcie: Add tegra3 support   Jay Agarwal
• [PATCH] mmc: dwmmc: let device core setup the default pin configuration   Doug Anderson
• [PATCH v2] mmc: dwmmc: let device core setup the default pin configuration   Doug Anderson
• [PATCH 0/2] These two patches to s3c_pm_arch_prepare_irqs() were part of the work   Doug Anderson
• [PATCH v3] mmc: dw_mmc: let device core setup the default pin configuration   Doug Anderson
• [PATCH] ARM: dts: fix bad merge of display timing node to exynos5250-smdk5250.dts   Doug Anderson
• [PATCH] ARM: dts: Disable the RTC by default on exynos5   Doug Anderson
• [PATCH] ARM: dts: fix bad merge of display timing node to exynos5250-smdk5250.dts   Doug Anderson
• [PATCH] ARM: dts: fix bad merge of display timing node to exynos5250-smdk5250.dts   Doug Anderson
• [PATCH] ARM: dts: fix bad merge of display timing node to exynos5250-smdk5250.dts   Doug Anderson
• [PATCH v5 2/3] ARM: dts: Add i2c-arbitrator bus for exynos5250-snow   Doug Anderson
• [PATCH v5 3/3] ARM: dts: Add sbs-battery for exynos5250-snow   Doug Anderson
• [PATCH v5 2/3] ARM: dts: Add i2c-arbitrator bus for exynos5250-snow   Doug Anderson
• [PATCH v5 3/3] ARM: dts: Add sbs-battery for exynos5250-snow   Doug Anderson
• [PATCH v4] mmc: dw_mmc: let device core setup the default pin configuration   Doug Anderson
• [PATCH v4] mmc: dw_mmc: let device core setup the default pin configuration   Doug Anderson
• [PATCH v4] mmc: dw_mmc: let device core setup the default pin configuration   Doug Anderson
• [PATCH] spi: s3c64xx: let device core setup the default pin configuration   Doug Anderson
• [REPOST PATCH] spi: s3c64xx: let device core setup the default pin configuration   Doug Anderson
• [PATCH v6 2/3] ARM: dts: Add i2c-arbitrator bus for exynos5250-snow   Doug Anderson
• [PATCH v6 3/3] ARM: dts: Add sbs-battery for exynos5250-snow   Doug Anderson
• [PATCH] ARM: exynos: dts: cros5250: add EC device   Doug Anderson
• [PATCH] ARM: exynos: dts: cros5250: add cyapa trackpad   Doug Anderson
• [PATCH] ARM: exynos: dts: cros5250: add EC device   Doug Anderson
• [PATCH v2] ARM: exynos: dts: cros5250: add EC device   Doug Anderson
• [PATCH V2 03/12] PM / Domains: Add on-off notifiers   Rickard Andersson
• [PATCH V2 03/12] PM / Domains: Add on-off notifiers   Rickard Andersson
• [PATCH] clk: remove clock notifier at unregister   David Andrey
• [GIT PULL] mailbox driver framework for v3.10 merge window   Anna, Suman
• [GIT PULL] mailbox driver framework for v3.10 merge window   Anna, Suman
• [PATCHv3 00/14] drivers: mailbox: framework creation   Anna, Suman
• [PATCHv3 00/14] drivers: mailbox: framework creation   Anna, Suman
• [PATCHv3 00/14] drivers: mailbox: framework creation   Suman Anna
• [PATCHv3 00/14] drivers: mailbox: framework creation   Suman Anna
• [PATCHv3 00/14] drivers: mailbox: framework creation   Suman Anna
• [PATCHv3 00/14] drivers: mailbox: framework creation   Suman Anna
• [PATCHv3 00/14] drivers: mailbox: framework creation   Suman Anna
• [RFC 3/3] mailbox: pl320: Introduce common API driver   Suman Anna
• Manufacturer of PCB Solid Carbide Drills and Routers   Archer
• v7_flush_kern_cache_louis flushes up to L2?   Jonathan Austin
• v7_flush_kern_cache_louis flushes up to L2?   Jonathan Austin
• [PATCH v10 1/3] ARM: Add base support for ARMv7-M   Jonathan Austin
• [PATCH v11 0/3] Another round of ARMv7-M patches   Jonathan Austin
• [PATCH v11 0/3] Another round of ARMv7-M patches   Jonathan Austin
• [PATCH v4] ARM: davinci: da850: add EHRPWM & ECAP DT node   Philip Avinash
• [PATCH v5] ARM: davinci: da850: add EHRPWM & ECAP DT node   Philip Avinash
• [PATCH] ARM: at91/tc: fix clock source id for tc block > 1   Boris BREZILLON
• [PATCH] ARM: at91/tc: fix clock source id for tc block > 1   Boris BREZILLON
• [PATCH 1/5 v2] mv643xx_eth: add Device Tree bindings   Simon Baatz
• [PATCH 3/5 v2] ARM: kirkwood: add device node entries for the gigabit interfaces   Simon Baatz
• [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Simon Baatz
• [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Simon Baatz
• [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Simon Baatz
• [PATCH 0/3] ARM: Kirkwood: Add DT support for (eSATA) Sheevaplug   Simon Baatz
• [PATCH 1/3] mmc: mvsdio: Support inverted CD and WP GPIO lines   Simon Baatz
• [PATCH 2/3] ARM: Kirkwood: Add dts files for Sheevaplug and eSATA Sheevaplug   Simon Baatz
• [PATCH 3/3] ARM: Kirkwood: Add DT support for Sheevaplug and Sheevaplug eSATA   Simon Baatz
• [PATCH 1/3] mmc: mvsdio: Support inverted CD and WP GPIO lines   Simon Baatz
• [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Simon Baatz
• [PATCH] clk: si5351: Add gapless tuning for SI5351 PLL   Michal Bachraty
• [PATCH] clk: si5351: Add gapless tuning for SI5351 PLL   Michal Bachraty
• [PATCH v7] clk: add si5351 i2c common clock driver   Michal Bachraty
• [PATCH v7] clk: add si5351 i2c common clock driver   Michal Bachraty
• [PATCH v8] clk: add si5351 i2c common clock driver   Michal Bachraty
• [PATCH 3/5] USB chipidea: introduce dual role mode pdata flags   Felipe Balbi
• [PATCH 1/2] ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY   Felipe Balbi
• [PATCH V2 6/6] usb: mv_usb: remove clock name from pdata   Felipe Balbi
• [PATCH 1/2] ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY   Felipe Balbi
• [PATCH v5 1/6] drivers: phy: add generic PHY framework   Felipe Balbi
• [PATCH v5 2/6] usb: phy: omap-usb2: use the new generic PHY framework   Felipe Balbi
• [PATCH v5 1/6] drivers: phy: add generic PHY framework   Felipe Balbi
• [PATCH v5 1/6] drivers: phy: add generic PHY framework   Felipe Balbi
• [PATCH v5 2/6] usb: phy: omap-usb2: use the new generic PHY framework   Felipe Balbi
• [PATCH v5 1/6] drivers: phy: add generic PHY framework   Felipe Balbi
• [PATCH 3/5] gpio/omap: optimise interrupt service routine   Felipe Balbi
• [PATCH v3 1/4] ARM: OMAP4+: PM: Consolidate MPU subsystem PM code for re-use   Felipe Balbi
• [PATCH v3 2/4] ARM: OMAP4+: PM: Consolidate OMAP4 PM code to re-use it for OMAP5   Felipe Balbi
• [PATCH v3 1/4] ARM: OMAP4+: PM: Consolidate MPU subsystem PM code for re-use   Felipe Balbi
• [PATCH v3 1/4] ARM: OMAP4+: PM: Consolidate MPU subsystem PM code for re-use   Felipe Balbi
• [PATCH v3 4/9] rcar-phy: remove EHCI internal buffer setup   Felipe Balbi
• [PATCH v3 0/9] Reorganize R8A7779/Marzen USB code   Felipe Balbi
• [PATCH v3 4/9] rcar-phy: remove EHCI internal buffer setup   Felipe Balbi
• [PATCH v3 6/9] rcar-phy: correct base address   Felipe Balbi
• [PATCH v3 0/9] Reorganize R8A7779/Marzen USB code   Felipe Balbi
• [PATCH] ahci: sata: add support for exynos5440 sata   Felipe Balbi
• Multiple issues with omap4 panda es in linux next   Felipe Balbi
• linux-next ARM multi-platform randconfig errors   Felipe Balbi
• linux-next ARM multi-platform randconfig errors   Felipe Balbi
• linux-next ARM multi-platform randconfig errors   Felipe Balbi
• [PATCH 06/10] usb: musb: ux500: add device tree probing support   Felipe Balbi
• [PATCH 06/10] usb: musb: ux500: add device tree probing support   Felipe Balbi
• [PATCH] usb: phy: phy core cannot yet be a module   Felipe Balbi
• [PATCH] usb: phy: phy core cannot yet be a module   Felipe Balbi
• [PATCH v2] usb: phy: don't mark usb_bind_phy as __init   Felipe Balbi
• [PATCH 04/10] usb: musb: ux500: harden checks for platform data   Felipe Balbi
• Multiple issues with omap4 panda es in linux next   Felipe Balbi
• Multiple issues with omap4 panda es in linux next   Felipe Balbi
• [V9 PATCH 01/12] usb: phy: protect phy init and shutdown for mutiple deivces   Felipe Balbi
• [PATCH v7 0/5] Add DT support for davinci_mmc driver   Chris Ball
• [PATCH 2/2] mmc: mxs-mmc: add non-removeable property   Chris Ball
• [PATCH] mmc: atmel-mci: pio hang on block errors   Chris Ball
• [PATCH 09/30] mmc: sdhci-s3c: remove platform dependencies   Chris Ball
• [PATCH] mmc: mxcmmc: Fix bug when card is present during boot   Chris Ball
• [PATCH v5] mmc: dw_mmc: let device core setup the default pin configuration   Chris Ball
• [PATCH v3] mmc: mxcmmc: DT support   Chris Ball
• [PATCH v3] mmc: mxcmmc: DT support   Chris Ball
• [PATCH 1/3] mmc: mvsdio: Support inverted CD and WP GPIO lines   Chris Ball
• [PATCH 1/3] mmc: mvsdio: Support inverted CD and WP GPIO lines   Chris Ball
• [PATCH 12/21] mmc: sdhci-tegra: fix MODULE_DEVICE_TABLE   Chris Ball
• [PATCH 12/21] mmc: sdhci-tegra: fix MODULE_DEVICE_TABLE   Chris Ball
• [PATCH] ARM: ux500: update V-INTCORE constraints   Fabio Baltieri
• [PATCH RESEND] ARM: ux500: update V-INTCORE constraints   Fabio Baltieri
• [PATCH RESEND] ARM: ux500: update V-INTCORE constraints   Fabio Baltieri
• [PATCH 2/3] clk: ux500: abx500: Define clock tree for ab850x   Fabio Baltieri
• [PATCH] mfd: ab8500-core: Add of_compatilbe property for ab8500-usb   Fabio Baltieri
• [PATCH] ARM: ux500: Fix intcore regulator name   Fabio Baltieri
• [PATCH] clk: ux500: abx500-clk: rename ux500 audio codec aliases   Fabio Baltieri
• [PATCH 0/5] various ab8500 fixes   Fabio Baltieri
• [PATCH 1/5] mfd: abx500-core: fix sparse warning   Fabio Baltieri
• [PATCH 2/5] mfd: ab8500-sysctrl: fix sparse warning   Fabio Baltieri
• [PATCH 3/5] mfd: ab8500: drop references to ab8500-leds   Fabio Baltieri
• [PATCH 4/5] mfd: ab8500-sysctrl: set sysctrl_dev during probe   Fabio Baltieri
• [PATCH 5/5] mfd: ab8500-sysctrl: let sysctrl driver work without pdata   Fabio Baltieri
• [PATCH 00/10] usb: musb: ux500: pathe the way for Device Tree enablement   Fabio Baltieri
• [PATCH] clk: ux500: clk-sysctrl: handle clocks with no parents   Fabio Baltieri
• [PATCH 0/3] gpio: remove GENERIC_GPIO completely   Chen Baozi
• [PATCH] gpio: update gpio Chinese documentation   Chen Baozi
• [PATCH] Support fsl-dcp crypto coprocessor   Christoph G. Baumann
• [PATCH 0/2] Support fsl-dcp crypto coprocessor   Christoph G. Baumann
• [PATCH 1/2] Support fsl-dcp crypto coprocessor   Christoph G. Baumann
• [PATCH 2/2] Support fsl-dcp crypto coprocessor   Christoph G. Baumann
• [PATCH] Support fsl-dcp crypto coprocessor   Christoph G. Baumann
• [PATCH 0/2] crypto: added support for fsl-dcp on iMX23,28,50   Christoph G. Baumann
• [PATCH 1/2] crypto: added support for fsl-dcp on iMX23,28,50   Christoph G. Baumann
• [PATCH 2/2] crypto: added support for fsl-dcp on iMX23,28,50   Christoph G. Baumann
• Driver for OCOTP with write support for i.MX23/28   Christoph G. Baumann
• [RFC v2 16/18] ARM: OMAP2+: AM33XX: Basic suspend resume support   Bedia, Vaibhav
• [PATCH] ARM: EXYNOS: Use wfi macro in platform_do_lowpower   Tushar Behera
• [PATCH] ARM i.MX6: Fix ldb_di clock selection   Dirk Behme
• [PATCH] ARM i.MX6q: Fix periph_clk2_sel and periph2_clk2_sel clocks   Dirk Behme
• [PATCH] ARM i.MX6: correct MLB clock configuration   Dirk Behme
• [PATCH 1/2] ARM: dts: i.MX6: configure L2 cache data and tag latency   Dirk Behme
• [PATCH 2/2] ARM: i.MX6: add i.MX6 specific L2 cache configuration   Dirk Behme
• [PATCH RESEND] video: mxsfb: Fix colors display on lower color depth   Juergen Beisert
• [PATCH 1/2] clk: si5351: Fix clkout rate computation.   Marek Belisko
• [PATCH 2/2] clk: si5351: Apply rate when clock-frequency is defined in devicetree.   Marek Belisko
• [PATCH] clk: si5351: Allow user to define disabled state for every clock output.   Marek Belisko
• [PATCH] ARM: dts: cfa10036: Add touchscreen support to the CFA-10049   Alexandre Belloni
• [PATCH 0/3] Add support for the Nuvoton NAU7802 ADC to the cfa10049   Alexandre Belloni
• [PATCH 1/3] iio: Add Nuvoton NAU7802 ADC driver   Alexandre Belloni
• [PATCH 2/3] ARM: mxs: cfa10049: Switch bus i2c1 to bitbanging   Alexandre Belloni
• [PATCH 3/3] ARM: mxs: cfa10049: Add NAU7802 ADCs to the device tree   Alexandre Belloni
• [PATCH 1/3] iio: Add Nuvoton NAU7802 ADC driver   Alexandre Belloni
• [PATCH v9 2/6] remoteproc: Change typo FW_CONFIG to FW_LOADER for REMOTEPROC   Ohad Ben-Cohen
• [PATCH v9 3/6] remoteproc: Add support to rproc_alloc() for a default firmware name   Ohad Ben-Cohen
• [PATCH v9 1/6] rpmsg: Process all available messages in virtqueue callback   Ohad Ben-Cohen
• [PATCH v9 4/6] ARM: davinci: Add a remoteproc driver implementation for OMAP-L13x DSP   Ohad Ben-Cohen
• [PATCH v9 0/6] ARM: davinci: remoteproc support   Ohad Ben-Cohen
• [GIT PULL] remoteproc fixes for 3.9   Ohad Ben-Cohen
• [GIT PULL] an hwspinlock fix for 3.9   Ohad Ben-Cohen
• [PATCH v9 1/6] rpmsg: Process all available messages in virtqueue callback   Ohad Ben-Cohen
• [PATCH v9 4/6] ARM: davinci: Add a remoteproc driver implementation for OMAP-L13x DSP   Ohad Ben-Cohen
• [PATCH v9 1/6] rpmsg: Process all available messages in virtqueue callback   Ohad Ben-Cohen
• adding rpmsg.git to linux next   Ohad Ben-Cohen
• [PATCH v10 1/1] ARM: davinci: Add a remoteproc driver implementation for OMAP-L13x DSP   Ohad Ben-Cohen
• adding rpmsg.git to linux next   Ohad Ben-Cohen
• [PATCH 0/10] LPC32XX: Various patches and improvements   Cedric Berger
• [PATCH 1/10] LPC32XX: 001-mmc.1: Define + Implement DMA_FORCE_BURST for pl032   Cedric Berger
• [PATCH 2/10] LPC32XX: 002-mmc.1: Workaround for MMC+DMA on LPC32xx   Cedric Berger
• [PATCH 3/10] LPC32XX: 003-mmc.1: Don't access private fields in MMC controller   Cedric Berger
• [PATCH 4/10] LPC32XX: 004-mmc.1: Enable dma for Phytec board   Cedric Berger
• [PATCH 5/10] LPC32XX: 005-clock.1: Allows clock input other than 13MHz for lpc32xx   Cedric Berger
• [PATCH 6/10] LPC32XX: 006-clock.1: Fully enable SSP devices   Cedric Berger
• [PATCH 7/10] LPC32XX: 007-pl022.1: Add start_control board hook   Cedric Berger
• [PATCH 8/10] LPC32XX: 008-pl022.1: Supports is_dma_mapped for pl022   Cedric Berger
• [PATCH 9/10] LPC32XX: 009-plat.1: lpc23xx => lpc32xx in LPC32xx platform code   Cedric Berger
• [PATCH 10/10] LPC32XX: 010-fiq.1: Enable FIQ interrupts for the LPC32xx controllers   Cedric Berger
• [PATCH 1/10] LPC32XX: 001-mmc.2: Define + Implement DMA_FORCE_BURST for pl08x (V2)   Cedric Berger
• [PATCH 2/10] LPC32XX: 002-mmc.2: Workaround for MMC+DMA on LPC32xx (V2)   Cedric Berger
• [PATCH 3/10] LPC32XX: 003-mmc.2: Cleanup, Don't access private fields in MMC controller (V2)   Cedric Berger
• [PATCH 4/10] LPC32XX: 004-mmc.2: Enable dma for Phytec board (V2)   Cedric Berger
• [PATCH 2/10] LPC32XX: 002-mmc.1: Workaround for MMC+DMA on LPC32xx   Cedric Berger
• [PATCH 1/2] ARM: tegra: move <mach/powergate.h> to <linux/tegra-powergate.h>   Arnd Bergmann
• [GIT PULL v2] Renesas ARM-based SoC board updates for v3.10   Arnd Bergmann
• [GIT PULL] ARM: cns3xxx: v3.9-rc1_cns3xxx_fixes   Arnd Bergmann
• [GIT PULL] arm-soc fixes for 3.9-rc5   Arnd Bergmann
• [PATCH 16/30] ARM: shmobile: sh7372: use fixed ratio clock   Arnd Bergmann
• [PATCH V5 0/6] USB: EHCI multiplatform for 3.10   Arnd Bergmann
• [PATCH V5 1/6] USB: EHCI: make ehci-orion a separate driver   Arnd Bergmann
• [PATCH V5 2/6] USB: EHCI: make ehci-spear a separate driver   Arnd Bergmann
• [PATCH V5 3/6] USB: EHCI: make ehci-s5p a separate driver   Arnd Bergmann
• [PATCH V5 4/6] USB: EHCI: make ehci-atmel a separate driver   Arnd Bergmann
• [PATCH V5 5/6] USB: EHCI: make ehci-msm a separate driver   Arnd Bergmann
• [PATCH V5 6/6] USB: OHCI: avoid conflicting platform drivers   Arnd Bergmann
• [GIT PULL] at91: soc for 3.10 #2   Arnd Bergmann
• [RFC PATCH] at_hdmac: move to generic DMA binding   Arnd Bergmann
• [PATCH v5 2/6] usb: phy: omap-usb2: use the new generic PHY framework   Arnd Bergmann
• [RFC PATCH arm: initial TI-Nspire support]   Arnd Bergmann
• [PATCH V2 1/2] ARM: bcm281xx: Add L2 cache enable code   Arnd Bergmann
• [PATCH 11/11] RFC: ARM: get PCI device IRQs from device tree   Arnd Bergmann
• [PATCH 00/11] ARM: integrator PCI DT adaption   Arnd Bergmann
• [PATCH v2, part1 03/29] mm/ARM: use common help functions to free reserved pages   Arnd Bergmann
• linux-next: manual merge of the arm-soc tree with the xilinx tree   Arnd Bergmann
• mvebu-mbus: defining a DT binding   Arnd Bergmann
• linux-next: manual merge of the arm-soc tree with the xilinx tree   Arnd Bergmann
• mvebu-mbus: defining a DT binding   Arnd Bergmann
• [PATCH 00/14] Ux500 multiplatform v2   Arnd Bergmann
• mvebu-mbus: defining a DT binding   Arnd Bergmann
• [PATCH v4 04/14] mfd: Add Samsung PWM/timer master driver   Arnd Bergmann
• mvebu-mbus: defining a DT binding   Arnd Bergmann
• mvebu-mbus: defining a DT binding   Arnd Bergmann
• [PATCH v4 04/14] mfd: Add Samsung PWM/timer master driver   Arnd Bergmann
• [GIT PULL] Multi Cluster Power Management infrastructure   Arnd Bergmann
• [PATCH v2 1/9] arm: mvebu: Limit the DMA zone when LPAE is selected   Arnd Bergmann
• [PATCH v2 7/9] arm: dts: mvebu: introduce internal-regs node   Arnd Bergmann
• [PATCH v2 8/9] arm: dts: mvebu: fix cpus section indentation   Arnd Bergmann
• [PATCH v2 0/9] rm: mvebu: Enable LPAE support for Armada XP SoCs   Arnd Bergmann
• [PATCH v2 2/9] arm: mvebu: Align the internal registers virtual base to support LPAE   Arnd Bergmann
• mvebu-mbus: defining a DT binding   Arnd Bergmann
• [PATCH v2 2/9] arm: mvebu: Align the internal registers virtual base to support LPAE   Arnd Bergmann
• mvebu-mbus: defining a DT binding   Arnd Bergmann
• [RFC PATCH arm: initial TI-Nspire support]   Arnd Bergmann
• [PATCH v3 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Arnd Bergmann
• [PATCH v3 0/5] Device Bus support for Marvell EBU SoC   Arnd Bergmann
• [RFC PATCH arm: initial TI-Nspire support]   Arnd Bergmann
• [PATCH v2 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Arnd Bergmann
• [PATCH v3 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Arnd Bergmann
• [RFC PATCH arm: initial TI-Nspire support]   Arnd Bergmann
• [PATCH 00/14] Ux500 multiplatform v2   Arnd Bergmann
• [RFC PATCH arm: initial TI-Nspire support]   Arnd Bergmann
• [PATCH v4 0/5] Device Bus support for Marvell EBU SoC   Arnd Bergmann
• [GIT PULL] mxs fixes for 3.9, take 4   Arnd Bergmann
• [GIT PULL] Update for Renesas INTC External IRQ pin driver for v3.10   Arnd Bergmann
• [GIT PULL] Update for Renesas INTC External IRQ pin driver for v3.10   Arnd Bergmann
• [PATCH 2/5] dmaengine: ste_dma40: Assign memcpy channels in the driver   Arnd Bergmann
• [PATCH 3/5] dmaengine: ste_dma40: Move default memcpy configs into the driver   Arnd Bergmann
• [PATCH 1/5] ARM: ux500: Move DMA40 platform data includes file out to include/   Arnd Bergmann
• [PATCH 4/5] dmaengine: ste_dma40: Only configure a channel during a configure request   Arnd Bergmann
• [GIT PULL 1/3] omap non critical fixes for v3.10 merge window   Arnd Bergmann
• [GIT PULL] arm: vt8500: Add support for pinctrl/gpio module   Arnd Bergmann
• [GIT PULL] arm-soc: Xilinx zynq timer changes for v3.10   Arnd Bergmann
• [GIT PULL] arm-soc: Xilinx zynq core - pmu enable for v3.10   Arnd Bergmann
• [GIT PULL] arm-soc: Xilinx zynq core - smp for v3.10   Arnd Bergmann
• [PATCH V5 0/6] USB: EHCI multiplatform for 3.10   Arnd Bergmann
• [GIT PULL 1/3] omap usb platform init changes for v3.10 merge window   Arnd Bergmann
• [GIT PULL 2/3] omap timer changes for v3.10 merge window   Arnd Bergmann
• [GIT PULL 2/3] omap timer changes for v3.10 merge window   Arnd Bergmann
• [GIT PULL 3/3] omap gpmc changes for v3.10 merge window   Arnd Bergmann
• [GIT PULL 1/3] ARM: bcm2835: device tree updates   Arnd Bergmann
• [GIT PULL] Renesas ARM based SoC bockw defconfig updates for v3.10   Arnd Bergmann
• [PATCH v4 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Arnd Bergmann
• GENERIC_GPIO considered deprecated   Arnd Bergmann
• [RFC PATCH arm: initial TI-Nspire support]   Arnd Bergmann
• [RFC PATCH arm: initial TI-Nspire support]   Arnd Bergmann
• [PATCHv7 08/17] pci: PCIe driver for Marvell Armada 370/XP systems   Arnd Bergmann
• [PATCHv7 08/17] pci: PCIe driver for Marvell Armada 370/XP systems   Arnd Bergmann
• [PATCHv7 08/17] pci: PCIe driver for Marvell Armada 370/XP systems   Arnd Bergmann
• linux-next: build warning after merge of the final tree (probably arm-soc tree related)   Arnd Bergmann
• linux-next: manual merge of the arm-soc tree with the omap_dss2 tree   Arnd Bergmann
• [PATCH 1/5] ARM: ux500: Move DMA40 platform data includes file out to include/   Arnd Bergmann
• [PATCH 4/5] dmaengine: ste_dma40: Do not configure channels during an channel allocation   Arnd Bergmann
• [PATCH v4 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Arnd Bergmann
• [GIT PULL] at91: DT changes for 3.10 #3   Arnd Bergmann
• [PATCH 4/5] dmaengine: ste_dma40: Do not configure channels during an channel allocation   Arnd Bergmann
• [PATCH v4 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Arnd Bergmann
• [GIT PULL] at91: DT changes for 3.10 #3   Arnd Bergmann
• [GIT PULL] mailbox driver framework for v3.10 merge window   Arnd Bergmann
• [GIT PULL] ARM: sunxi: dt for 3.10, take 2   Arnd Bergmann
• [GIT PULL 1/8] ARM: tegra: DT-related fixes needed by the MMC tree   Arnd Bergmann
• [GIT PULL 2/3] DaVinci DT updates for v3.10   Arnd Bergmann
• [PATCH] ARM: EXYNOS: no more support non-DT for EXYNOS SoCs   Arnd Bergmann
• [GIT PULL 3/3] DaVinci board updates for v3.10   Arnd Bergmann
• [GIT PULL 3/5] omap board changes for v3.10 merge window   Arnd Bergmann
• [GIT PULL] Renesas ARM r8a7778 SoC update for v3.10   Arnd Bergmann
• [GIT PULL] Renesas ARM-based SoC bockw board updates for v3.10   Arnd Bergmann
• [GIT PULL] Renesas ARM r8a7779 SoC update for v3.10   Arnd Bergmann
• [GIT PULL v2] imx fixes for 3.9, take 5   Arnd Bergmann
• [GIT PULL 2/8] ARM: tegra: minor fixes   Arnd Bergmann
• [GIT PULL 1/5] omap pm fixes for v3.10 merge window   Arnd Bergmann
• [GIT PULL 3/8] ARM: tegra: cleanup   Arnd Bergmann
• [GIT PULL 1/4] ARM: mxs: cleanup for 3.10   Arnd Bergmann
• [GIT PULL 01/10] cleanup-samsung for v3.10   Arnd Bergmann
• [GIT PULL] at91: little cleanup for 3.10 #3   Arnd Bergmann
• [GIT PULL] ux500 multiplatform tags   Arnd Bergmann
• [GIT PULL 2/4] ARM: mxs: multiplatform for 3.10   Arnd Bergmann
• multi-platform broken in -next   Arnd Bergmann
• [GIT PULL 4/8] ARM: tegra: core SoC support development   Arnd Bergmann
• [GIT PULL 3/4] ARM: mxs: soc changes for 3.10   Arnd Bergmann
• [GIT PULL 4/5] omap soc changes for v3.10 merge window   Arnd Bergmann
• [GIT PULL 2/5] omap pm clean-up for v3.10 merge window   Arnd Bergmann
• [GIT PULL 7/8] ARM: tegra: multi-platform conversion   Arnd Bergmann
• [GIT PULL 6/8] ARM: tegra: device tree changes   Arnd Bergmann
• [GIT PULL 5/8] ARM: tegra: clock driver development   Arnd Bergmann
• [GIT PULL 8/8] ARM: tegra: defconfig changes   Arnd Bergmann
• [GIT PULL] Samsung fixes-2 for v3.9   Arnd Bergmann
• [GIT PULL] Samsung fixes-2 for v3.9   Arnd Bergmann
• [GIT PULL 6/8] ARM: tegra: device tree changes   Arnd Bergmann
• [GIT PULL 4/4] ARM: mxs: device tree changes for 3.10   Arnd Bergmann
• [GIT PULL] ux500 pinctrl patches   Arnd Bergmann
• [PATCHv2] ARM: Push selects for TWD/SCU into machine entries   Arnd Bergmann
• [PATCH 8/8] ARM: ux500: Amalgamate DMA source and destination channel numbers   Arnd Bergmann
• [PATCH 7/8] dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s   Arnd Bergmann
• [PATCH 6/8] dmaengine: ste_dma40: Move LCPA allocation and real-time config   Arnd Bergmann
• [PATCH 5/8] dmaengine: ste_dma40: Ensure src and dst registers are configured correctly   Arnd Bergmann
• [PATCH 3/8] dmaengine: ste_dma40: Actually write the runtime configuration to registers   Arnd Bergmann
• [PATCHv7 08/17] pci: PCIe driver for Marvell Armada 370/XP systems   Arnd Bergmann
• [PATCH 7/8] dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s   Arnd Bergmann
• [PATCHv2] ARM: Push selects for TWD/SCU into machine entries   Arnd Bergmann
• [GIT PULL 7/8] ARM: tegra: multi-platform conversion   Arnd Bergmann
• [GIT PULL 02/10] 2nd irq-s3c24xx for v3.10   Arnd Bergmann
• [GIT PULL 02/10] 2nd irq-s3c24xx for v3.10   Arnd Bergmann
• [GIT PULL 04/10] clk-exynos for v3.10   Arnd Bergmann
• [PATCH 3/8] dmaengine: ste_dma40: Actually write the runtime configuration to registers   Arnd Bergmann
• [PATCH 5/8] dmaengine: ste_dma40: Ensure src and dst registers are configured correctly   Arnd Bergmann
• [GIT PULL 05/10] dt-exynos for v3.10   Arnd Bergmann
• [GIT PULL 09/10] 2nd timer-samsung for v3.10   Arnd Bergmann
• [GIT PULL 07/10] pmu-exynos for v3.10   Arnd Bergmann
• [GIT PULL 08/10] secure-exynos for v3.10   Arnd Bergmann
• [GIT PULL v2 10/10] devel-samsung for v3.10   Arnd Bergmann
• [GIT PULL 0/10] Samsung stuff for v3.10   Arnd Bergmann
• [PATCH 7/8] dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s   Arnd Bergmann
• [PATCH RESEND] ARM: EXYNOS: no more support non-DT for EXYNOS SoCs   Arnd Bergmann
• [PATCH RESEND] ARM: EXYNOS: no more support non-DT for EXYNOS SoCs   Arnd Bergmann
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Arnd Bergmann
• [PATCH v4 04/14] mfd: Add Samsung PWM/timer master driver   Arnd Bergmann
• [PATCH 00/30] ARM: exynos multiplatform support   Arnd Bergmann
• [PATCH 01/30] ARM: exynos: introduce EXYNOS_ATAGS symbol   Arnd Bergmann
• [PATCH 02/30] ARM: exynos: prepare for sparse IRQ   Arnd Bergmann
• [PATCH 03/30] ARM: exynos: move debug-macro.S to include/debug/   Arnd Bergmann
• [PATCH 04/30] ARM: samsung: move mfc device definition to s5p-dev-mfc.c   Arnd Bergmann
• [PATCH 05/30] tty: serial/samsung: prepare for common clock API   Arnd Bergmann
• [PATCH 06/30] tty: serial/samsung: make register definitions global   Arnd Bergmann
• [PATCH 07/30] tty: serial/samsung: fix modular build   Arnd Bergmann
• [PATCH 08/30] i2c: s3c2410: make header file local   Arnd Bergmann
• [PATCH 09/30] mmc: sdhci-s3c: remove platform dependencies   Arnd Bergmann
• [PATCH 10/30] usb: exynos: do not include plat/usb-phy.h   Arnd Bergmann
• [PATCH 11/30] [media] exynos: remove unnecessary header inclusions   Arnd Bergmann
• [PATCH 12/30] video/exynos: remove unnecessary header inclusions   Arnd Bergmann
• [PATCH 13/30] video/s3c: move platform_data out of arch/arm   Arnd Bergmann
• [PATCH 14/30] thermal/exynos: remove unnecessary header inclusions   Arnd Bergmann
• [PATCH 15/30] mtd: onenand/samsung: make regs-onenand.h file local   Arnd Bergmann
• [PATCH 16/30] rtc: s3c: make header file local   Arnd Bergmann
• [PATCH 17/30] pwm: samsung: repair the worst MMIO abuses   Arnd Bergmann
• [PATCH 18/30] ASoC: samsung: move plat/ headers to local directory   Arnd Bergmann
• [PATCH 19/30] ASoC: samsung: use irq resource for idma   Arnd Bergmann
• [PATCH 20/30] ASoC: samsung: convert to dmaengine API   Arnd Bergmann
• [PATCH 21/30] ASoC: samsung/i2s: fix module_device_table   Arnd Bergmann
• [PATCH 22/30] ASoC: samsung/idma: export idma_reg_addr_init   Arnd Bergmann
• [PATCH 23/30] clk: exynos: prepare for multiplatform   Arnd Bergmann
• [PATCH 24/30] clocksource: exynos_mct: remove platform header dependency   Arnd Bergmann
• [PATCH 25/30] irqchip: exynos: pass max combiner number to combiner_init   Arnd Bergmann
• [PATCH 26/30] irqchip: exynos: allocate combiner_data dynamically   Arnd Bergmann
• [PATCH 27/30] irqchip: exynos: localize irq lookup for ATAGS   Arnd Bergmann
• [PATCH 28/30] irqchip: exynos: pass irq_base from platform   Arnd Bergmann
• [PATCH 29/30] spi: s3c64xx: move to generic dmaengine API   Arnd Bergmann
• [PATCH 30/30] ARM: exynos: enable multiplatform support   Arnd Bergmann
• [PATCH 11/30] [media] exynos: remove unnecessary header inclusions   Arnd Bergmann
• [PATCH 12/30] video/exynos: remove unnecessary header inclusions   Arnd Bergmann
• [RFC PATCHv2 arm: initial TI-Nspire support]   Arnd Bergmann
• [RFC PATCHv2 arm: initial TI-Nspire support]   Arnd Bergmann
• [PATCH 20/30] ASoC: samsung: convert to dmaengine API   Arnd Bergmann
• [GIT PULL] ARM: mvebu: fixes for v3.9 (round 3)   Arnd Bergmann
• [GIT PULL] arm-soc fixes for 3.9-rc6   Arnd Bergmann
• [PATCH 18/30] ASoC: samsung: move plat/ headers to local directory   Arnd Bergmann
• [PATCH v2] spi: s3c64xx: move to generic dmaengine API   Arnd Bergmann
• [PATCH v3] usb: exynos: do not include plat/usb-phy.h   Arnd Bergmann
• [GIT PULL] Timer clean-ups for 3.10, Part 2   Arnd Bergmann
• [PATCH v4 04/14] mfd: Add Samsung PWM/timer master driver   Arnd Bergmann
• [PATCH v3 00/10] ARM: exynos multiplatform series, part 1   Arnd Bergmann
• [PATCH v3 01/10] ARM: exynos: introduce EXYNOS_ATAGS symbol   Arnd Bergmann
• [PATCH v3 02/10] ARM: exynos: prepare for sparse IRQ   Arnd Bergmann
• [PATCH v3 03/10] ARM: exynos: move debug-macro.S to include/debug/   Arnd Bergmann
• [PATCH v3 04/10] ARM: samsung: move mfc device definition to s5p-dev-mfc.c   Arnd Bergmann
• [PATCH v3 05/10] i2c: s3c2410: make header file local   Arnd Bergmann
• [PATCH v3 06/10] mmc: sdhci-s3c: remove platform dependencies   Arnd Bergmann
• [PATCH v3 07/10] thermal/exynos: remove unnecessary header inclusions   Arnd Bergmann
• [PATCH v3 08/10] mtd: onenand/samsung: make regs-onenand.h file local   Arnd Bergmann
• [PATCH v3 09/10] rtc: s3c: make header file local   Arnd Bergmann
• [PATCH v3 10/10] ARM: exynos: enable multiplatform support   Arnd Bergmann
• [PATCH v3 05/10] i2c: s3c2410: make header file local   Arnd Bergmann
• [PATCH] ARM: pci: pass a parent to pci_common_init()   Arnd Bergmann
• [PATCH] ARM: pci: pass a parent to pci_common_init()   Arnd Bergmann
• [PATCH 0/7] exynos multiplatform support, part 2   Arnd Bergmann
• [PATCH 1/7] clk: exynos: prepare for multiplatform   Arnd Bergmann
• [PATCH 2/7] clocksource: exynos_mct: remove platform header dependency   Arnd Bergmann
• [PATCH 3/7] ARM: exynos: add missing properties for combiner IRQs   Arnd Bergmann
• [PATCH 4/7] irqchip: exynos: pass max combiner number to combiner_init   Arnd Bergmann
• [PATCH 5/7] irqchip: exynos: allocate combiner_data dynamically   Arnd Bergmann
• [PATCH 6/7] irqchip: exynos: localize irq lookup for ATAGS   Arnd Bergmann
• [PATCH 7/7] irqchip: exynos: pass irq_base from platform   Arnd Bergmann
• [PATCH 1/2] ARM: default machine descriptor for multiplatform   Arnd Bergmann
• [PATCH 2/2] ARM: remove all trivial init_machine callbacks   Arnd Bergmann
• [PATCH 2/2] ARM: remove all trivial init_machine callbacks   Arnd Bergmann
• [PATCH 2/2] ARM: remove all trivial init_machine callbacks   Arnd Bergmann
• [PATCH v3] mmc: mxcmmc: DT support   Arnd Bergmann
• [PATCH v5 03/14] clocksource: samsung-pwm: Add infrastructure to share PWM hardware   Arnd Bergmann
• [PATCH v5 01/14] ARM: SAMSUNG: Move samsung-time to drivers/clocksource   Arnd Bergmann
• [PATCH v5 00/14] ARM: samsung-time: Prepare for multiplatform support   Arnd Bergmann
• [PATCH v5 00/14] ARM: samsung-time: Prepare for multiplatform support   Arnd Bergmann
• [PATCH 1/7] clk: exynos: prepare for multiplatform   Arnd Bergmann
• [PATCH 3/7] ARM: exynos: add missing properties for combiner IRQs   Arnd Bergmann
• [PATCH 3/7] ARM: exynos: add missing properties for combiner IRQs   Arnd Bergmann
• [PATCH 3/7] ARM: exynos: add missing properties for combiner IRQs   Arnd Bergmann
• Latest randconfig build errors   Arnd Bergmann
• [GIT PULL] Timer clean-ups for 3.10, Part 2   Arnd Bergmann
• [RFC PATCH 2/2] ARM: DT: kernel: DT cpu node bindings update   Arnd Bergmann
• [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig   Arnd Bergmann
• [PATCH] mmc: mmci: Allow MMCI to request channels with information acquired from DT   Arnd Bergmann
• [PATCH] mmc: mmci: Allow MMCI to request channels with information acquired from DT   Arnd Bergmann
• [PATCH 29/30] spi: s3c64xx: move to generic dmaengine API   Arnd Bergmann
• [PATCH v3] irqchip: Add support for ARMv7-M's NVIC   Arnd Bergmann
• [PATCH v3] irqchip: Add support for ARMv7-M's NVIC   Arnd Bergmann
• [PATCH] mmc: mmci: Allow MMCI to request channels with information acquired from DT   Arnd Bergmann
• [PATCH v3] irqchip: Add support for ARMv7-M's NVIC   Arnd Bergmann
• [PATCH 0/9] Fix ux500 crypto drivers and init DMA in the correct way   Arnd Bergmann
• [PATCH 08/32] dmaengine: ste_dma40: Optimise local MAX() macro   Arnd Bergmann
• [PATCH 07/32] ARM: ux500: Supply address location names for the DMA40 DMA controller   Arnd Bergmann
• [PATCH 05/32] dmaengine: ste_dma40: Supply macros to resolve 'src' and 'dst' directions   Arnd Bergmann
• [PATCH 06/32] ARM: ux500: Strip out duplicate USB DMA configuration   Arnd Bergmann
• [PATCH 14/32] dmaengine: ste_dma40: Remove 'always true' checking   Arnd Bergmann
• [PATCH 15/32] dmaengine: ste_dma40: Separate Logical Global Interrupt Mask (GIM) unmasking   Arnd Bergmann
• [PATCH 16/32] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()   Arnd Bergmann
• [PATCH 23/32] dmaengine: ste_dma40: Allow driver to be probe()able when DT is enabled   Arnd Bergmann
• [PATCH 24/32] dmaengine: ste_dma40: Supply full Device Tree parsing support   Arnd Bergmann
• [PATCH 24/32] dmaengine: ste_dma40: Supply full Device Tree parsing support   Arnd Bergmann
• [PATCH 25/32] ARM: ux500: Setup the DMA40 driver's DT node using the new DMA API   Arnd Bergmann
• [PATCH 28/32] ARM: ux500: Pass remnant platform data though to DMA40 driver   Arnd Bergmann
• [PATCH 1/6] at_hdmac: move to generic DMA binding   Arnd Bergmann
• [PATCH 08/32] dmaengine: ste_dma40: Optimise local MAX() macro   Arnd Bergmann
• [PATCH 24/32] dmaengine: ste_dma40: Supply full Device Tree parsing support   Arnd Bergmann
• [PATCH 24/32] dmaengine: ste_dma40: Supply full Device Tree parsing support   Arnd Bergmann
• [PATCH 24/32 v2] dmaengine: ste_dma40: Supply full Device Tree parsing support   Arnd Bergmann
• [PATCH 18/19] ARM: at91: suspend both memory controllers on at91sam9263   Arnd Bergmann
• [PATCH 18/19] ARM: at91: suspend both memory controllers on at91sam9263   Arnd Bergmann
• [PATCH 24/32 v3] dmaengine: ste_dma40: Supply full Device Tree parsing support   Arnd Bergmann
• [Suggestion] ARM64: kernel: compiling issue, need implement cmpxchg64 with assembler language.   Arnd Bergmann
• [PATCH] ARM64: kernel: compiling issue: need define readq and writeq for driver module using.   Arnd Bergmann
• [PATCH] ARM64: kernel: compiling issue, duplicate definition of early_console   Arnd Bergmann
• [PATCH 4/9 v2] crypto: ux500/cryp - Prepare clock before enabling it   Arnd Bergmann
• [PATCH 1/9 v2] crypto: ux500/hash - Prepare clock before enabling it   Arnd Bergmann
• [PATCH v3 00/10] ARM: exynos multiplatform series, part 1   Arnd Bergmann
• [PATCH v3] irqchip: Add support for ARMv7-M's NVIC   Arnd Bergmann
• [PATCH 1/2] ARM: default machine descriptor for multiplatform   Arnd Bergmann
• [PATCH v3] ARM: default machine descriptor for multiplatform   Arnd Bergmann
• [PATCH] cpufreq: exynos: allow disabling cpufreq drivers   Arnd Bergmann
• linux-next ARM multi-platform randconfig errors   Arnd Bergmann
• [PATCH] cpufreq: exynos: allow disabling cpufreq drivers   Arnd Bergmann
• linux-next ARM multi-platform randconfig errors   Arnd Bergmann
• [PATCH] ARM: exynos: restore mach/regs-clock.h for exynos5   Arnd Bergmann
• [PATCH v3] ARM: default machine descriptor for multiplatform   Arnd Bergmann
• linux-next ARM multi-platform randconfig errors   Arnd Bergmann
• [PATCH v3] ARM: default machine descriptor for multiplatform   Arnd Bergmann
• [Suggestion] ARM64: kernel: compiling issue, need implement cmpxchg64 with assembler language.   Arnd Bergmann
• [PATCH 2/4] arm64: Initial defconfig for APM X-Gene SOC family   Arnd Bergmann
• [PATCH 4/4] arm64: Add initial DTS for APM X-Gene Storm SOC and APM Mustang board   Arnd Bergmann
• [PATCH 2/4] arm64: Initial defconfig for APM X-Gene SOC family   Arnd Bergmann
• [PATCH v2] serial: pl011: Add Device Tree support to request DMA channels   Arnd Bergmann
• [PATCH] clocksource: add samsung pwm timer driver   Arnd Bergmann
• [PATCH 01/23] ARM: u300: fix ages old copy/paste bug   Arnd Bergmann
• [PATCH 03/23] ARM: u300: device tree support for the timer   Arnd Bergmann
• [PATCH 05/23] pinctrl: coh901: add device tree support   Arnd Bergmann
• [PATCH 06/23] ARM: u300: basic device tree support   Arnd Bergmann
• [PATCH v3] irqchip: Add support for ARMv7-M's NVIC   Arnd Bergmann
• [PATCH 19/23] ARM: u300: add the COH 901 318 DMAC to device tree   Arnd Bergmann
• [PATCH v3 00/10] ARM: exynos multiplatform series, part 1   Arnd Bergmann
• [PATCH 0/4] ARM 64 bit sched_clock take #2   Arnd Bergmann
• [PATCH RESEND] ARM: EXYNOS: no more support non-DT for EXYNOS SoCs   Arnd Bergmann
• [RFC PATCH v2 00/13] ARM: DT cpu bindings updates   Arnd Bergmann
• [PATCH 2/4] arm64: Initial defconfig for APM X-Gene SOC family   Arnd Bergmann
• [PATCH v2 1/3] ARM: dts: exynos4: Add node for PWM device   Arnd Bergmann
• [PATCH v2 2/3] ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC   Arnd Bergmann
• [PATCH v2 3/3] ARM: dts: exynos4210: Add basic dts file for universal_c210 board   Arnd Bergmann
• [PATCH v3 00/10] ARM: exynos multiplatform series, part 1   Arnd Bergmann
• [PATCH 06/10] usb: musb: ux500: add device tree probing support   Arnd Bergmann
• [PATCH 00/10] usb: musb: ux500: pathe the way for Device Tree enablement   Arnd Bergmann
• [PATCH 06/10] usb: musb: ux500: add device tree probing support   Arnd Bergmann
• [PATCH] ARM: bcm: mark bcm_kona_smc_init as __init   Arnd Bergmann
• [PATCH] ARM: allmodconfig regressions in linux-next   Arnd Bergmann
• [PATCH] usb: phy: phy core cannot yet be a module   Arnd Bergmann
• [PATCH] ASoC: don't call of_dma_request_slave_channel directly   Arnd Bergmann
• [PATCH] hwrng: bcm2835: fix MODULE_LICENSE tag   Arnd Bergmann
• [PATCH] clocksource: kona: adapt to CLOCKSOURCE_OF_DECLARE change   Arnd Bergmann
• [PATCH] usb: phy: phy core cannot yet be a module   Arnd Bergmann
• [PATCH 00/21] ARM build fixes for 3.10   Arnd Bergmann
• [PATCH 01/21] Turn off -Wmaybe-uninitialized when building with -Os   Arnd Bergmann
• [PATCH 02/21] ARM: compressed/head.S: work around new binutils warning   Arnd Bergmann
• [PATCH 03/21] ARM: use optimized do_div only for EABI   Arnd Bergmann
• [PATCH 04/21] ARM: kvm: define KVM_ARM_MAX_VCPUS unconditionally   Arnd Bergmann
• [PATCH 05/21] ARM: OMAP2+: add dependencies on ARCH_MULTI_V6/V7   Arnd Bergmann
• [PATCH 06/21] ARM: tegra: call cpu_do_idle from C code   Arnd Bergmann
• [PATCH 07/21] ARM: tegra: unify tegra_idle_device definitions   Arnd Bergmann
• [PATCH 08/21] ASoC: ux500: forward declare msp_i2s_platform_data   Arnd Bergmann
• [PATCH 09/21] spi/sirf: fix MODULE_DEVICE_TABLE   Arnd Bergmann
• [PATCH 10/21] ssb: fix alignment of struct bcma_device_id   Arnd Bergmann
• [PATCH 11/21] drm/tilcdc: use only a single module device table   Arnd Bergmann
• [PATCH 12/21] mmc: sdhci-tegra: fix MODULE_DEVICE_TABLE   Arnd Bergmann
• [PATCH 13/21] misc: mark spear13xx-pcie-gadget as broken   Arnd Bergmann
• [PATCH 14/21] staging: nvec: allow modular build   Arnd Bergmann
• [PATCH 15/21] staging: comedi/dawboard2000: use mdelay for large delays   Arnd Bergmann
• [PATCH 16/21] staging/zsmalloc: don't use pgtable-mapping from modules   Arnd Bergmann
• [PATCH 17/21] tty/serial/sirf: fix MODULE_DEVICE_TABLE   Arnd Bergmann
• [PATCH 18/21] usb: phy: tegra: don't call into tegra-ehci directly   Arnd Bergmann
• [PATCH 19/21] usb: phy: don't mark usb_bind_phy as __init   Arnd Bergmann
• [PATCH 20/21] MFD: ab8500: export ab8500_gpadc_sw_hw_convert properly   Arnd Bergmann
• [PATCH 21/21] mtd: omap2: allow bulding as a module   Arnd Bergmann
• [PATCH 12/21] mmc: sdhci-tegra: fix MODULE_DEVICE_TABLE   Arnd Bergmann
• [PATCH 07/21] ARM: tegra: unify tegra_idle_device definitions   Arnd Bergmann
• [PATCH 18/21] usb: phy: tegra: don't call into tegra-ehci directly   Arnd Bergmann
• [PATCH v2] usb: phy: tegra: don't call into tegra-ehci directly   Arnd Bergmann
• [PATCH v2] usb: phy: don't mark usb_bind_phy as __init   Arnd Bergmann
• [PATCH 05/21] ARM: OMAP2+: add dependencies on ARCH_MULTI_V6/V7   Arnd Bergmann
• [PATCH 14/21] staging: nvec: allow modular build   Arnd Bergmann
• [PATCH v2] usb: phy: don't mark usb_bind_phy as __init   Arnd Bergmann
• [PATCH 14/21] staging: nvec: allow modular build   Arnd Bergmann
• [PATCH] ARM: OMAP: remove unused variable   Arnd Bergmann
• [PATCH 04/11] dmaengine: dw_dmac: simplify master selection   Arnd Bergmann
• [PATCH] ASoC: don't call of_dma_request_slave_channel directly   Arnd Bergmann
• [PATCH 2/2] dma: imx-sdma: move to generic device tree bindings   Arnd Bergmann
• [PATCH 2/2] dma: imx-sdma: move to generic device tree bindings   Arnd Bergmann
• [PATCH 04/10] usb: musb: ux500: harden checks for platform data   Arnd Bergmann
• Exynos regressions w.r.t. config and debuggability due to multiplatform   Arnd Bergmann
• [PATCH 04/32] dmaengine: ste_dma40: Amalgamate DMA source and destination channel numbers   Arnd Bergmann
• [PATCH 6/9] crypto: ux500/cryp - Set DMA configuration though dma_slave_config()   Arnd Bergmann
• [PATCH v3 00/13] ARM: EXYNOS: Fix Universal C210 support   Arnd Bergmann
• [PATCH 00/21] more arm build fixes   Arnd Bergmann
• [PATCH 01/21] ARM: topology: export cpu_topology   Arnd Bergmann
• [PATCH 02/21] ARM: default machine descriptor for multiplatform   Arnd Bergmann
• [PATCH 03/21] ARM: shmobile: don't call irqchip_init unconditionally   Arnd Bergmann
• [PATCH 04/21] ARM: orion5x: include linux/cpu.h   Arnd Bergmann
• [PATCH 05/21] atm: he: use mdelay instead of large udelay constants   Arnd Bergmann
• [PATCH 06/21] ALSA: ali5451: use mdelay instead of large udelay constants   Arnd Bergmann
• [PATCH 07/21] oss/dmabuf: use dma_map_single   Arnd Bergmann
• [PATCH 08/21] drm/nouveau: use mdelay instead of large udelay constants   Arnd Bergmann
• [PATCH 09/21] drm: export drm_vm_open_locked   Arnd Bergmann
• [PATCH 10/21] [SCSI] nsp32: use mdelay instead of large udelay constants   Arnd Bergmann
• [PATCH 11/21] irqdomain: export irq_domain_add_simple   Arnd Bergmann
• [PATCH 12/21] irqchip: s3c24xx: add missing __init annotations   Arnd Bergmann
• [PATCH 13/21] iommu: tegra: print dma_addr_t using %lld   Arnd Bergmann
• [PATCH 14/21] cpufreq: pxa2xx: initialize variables   Arnd Bergmann
• [PATCH 15/21] thermal: cooling: avoid uninitialied used gcc warning   Arnd Bergmann
• [PATCH 16/21] OF: remove #ifdef from linux/of_platform.h   Arnd Bergmann
• [PATCH 17/21] X.509: do not emit any informational output   Arnd Bergmann
• [PATCH 18/21] USB: ehci-msm: USB_MSM_OTG needs USB_PHY   Arnd Bergmann
• [PATCH 19/21] USB: lpc32xx: ISP1301 needs USB_PHY   Arnd Bergmann
• [PATCH 20/21] USB: OMAP: ISP1301 needs USB_PHY   Arnd Bergmann
• [PATCH 21/21] USB: OHCI: avoid conflicting platform drivers   Arnd Bergmann
• Exynos regressions w.r.t. config and debuggability due to multiplatform   Arnd Bergmann
• [PATCH 15/21] thermal: cooling: avoid uninitialied used gcc warning   Arnd Bergmann
• [PATCH 14/21] cpufreq: pxa2xx: initialize variables   Arnd Bergmann
• [PATCH 18/21] USB: ehci-msm: USB_MSM_OTG needs USB_PHY   Arnd Bergmann
• [PATCH 6/9] crypto: ux500/cryp - Set DMA configuration though dma_slave_config()   Arnd Bergmann
• [PATCH 6/9] crypto: ux500/cryp - Set DMA configuration though dma_slave_config()   Arnd Bergmann
• [PATCH 0/2] Early printk support for virtio console devices.   Arnd Bergmann
• [PATCH V3 2/3] ARM: net: bpf_jit: make code generation less dependent on struct sk_filter.   Arnd Bergmann
• [PATCH v2] pinctrl: move subsystem mutex to pinctrl_dev struct   Arnd Bergmann
• [PATCH 0/2] Early printk support for virtio console devices.   Arnd Bergmann
• [PATCH 01/21] ARM: topology: export cpu_topology   Arnd Bergmann
• [PATCH v2 1/3] GPIO: clps711x: Rewrite driver for using generic GPIO code   Arnd Bergmann
• [PATCH] media: coda: Fix compile breakage   Arnd Bergmann
• [PATCH] media: coda: Fix compile breakage   Arnd Bergmann
• [PATCH] clk: si5351: Allow to build without CONFIG_OF   Arnd Bergmann
• [PATCH 03/21] ARM: shmobile: don't call irqchip_init unconditionallyA   Arnd Bergmann
• [PATCH v2 05/21] atm: he: use msleep instead of large udelay constants   Arnd Bergmann
• [PATCH 10/21] [SCSI] nsp32: use mdelay instead of large udelay constants   Arnd Bergmann
• [PATCH 21/21] mtd: omap2: allow bulding as a module   Arnd Bergmann
• [PATCH 03/21] ARM: shmobile: don't call irqchip_init unconditionally   Arnd Bergmann
• [PATCH V2] video: implement a simple framebuffer driver   Arnd Bergmann
• [PATCH V2] video: implement a simple framebuffer driver   Arnd Bergmann
• [PATCH V2] video: implement a simple framebuffer driver   Arnd Bergmann
• Latest build results - errors/warnings - lots of them   Arnd Bergmann
• Latest build results - errors/warnings - lots of them   Arnd Bergmann
• [PATCH V2] video: implement a simple framebuffer driver   Arnd Bergmann
• [PATCH 1/5] dmaengine: ste_dma40: Allow memcpy channels to be configured from DT   Arnd Bergmann
• [PATCH 3/5] ARM: ux500: Stop passing DMA platform data though AUXDATA   Arnd Bergmann
• Latest build results - errors/warnings - lots of them   Arnd Bergmann
• [PATCH] idle: fix hlt/nohlt command-line handling in new generic idle   Srivatsa S. Bhat
• RFC: right way to conditional-ize some macros for LTO   Tim Bird
• RFC: right way to conditional-ize some macros for LTO   Tim Bird
• [PATCH 1/4] mtd: merge mtdchar module with mtdcore   Artem Bityutskiy
• [PATCH] omap2+: Remove useless Makefile line   Paul Bolle
• [PATCH] omap2+: Remove useless Makefile line   Paul Bolle
• [PATCH] ARM: imx: remove configs ARCH_MX5 and ARCH_MX51   Paul Bolle
• [PATCH] ARM: EXYNOS: remove "config EXYNOS_DEV_DRM"   Paul Bolle
• [PATCH] ARM i.MX53: remove platform ahci support   Paul Bolle
• [PATCH] ARM i.MX53: remove platform ahci support   Paul Bolle
• [PATCH 2/2] ARM: i.MX: remove unused ARCH_* configs   Paul Bolle
• [PATCH V3 2/3] ARM: net: bpf_jit: make code generation less dependent on struct sk_filter.   Daniel Borkmann
• [PATCH V3 2/3] ARM: net: bpf_jit: make code generation less dependent on struct sk_filter.   Daniel Borkmann
• [PATCH V3 2/3] ARM: net: bpf_jit: make code generation less dependent on struct sk_filter.   Daniel Borkmann
• [PATCH V3 2/3] ARM: net: bpf_jit: make code generation less dependent on struct sk_filter.   Daniel Borkmann
• [PATCH] ARM: arch_timer: Silence debug preempt warnings   Stephen Boyd
• [RFC PATCH v1 0/3] clk: implement remuxing during set_rate   Stephen Boyd
• [PATCHv3 01/10] clocksource: add generic dummy timer driver   Stephen Boyd
• [PATCH] ARM: arch_timer: Silence debug preempt warnings   Stephen Boyd
• [PATCH] ARM: arch_timer: Silence debug preempt warnings   Stephen Boyd
• [PATCHv2] ARM: arch_timer: Silence debug preempt warnings   Stephen Boyd
• [PATCHv4 00/11] Remove ARM local timer API   Stephen Boyd
• [PATCHv4 01/11] clockevents: Prefer CPU local devices over global devices   Stephen Boyd
• [PATCHv4 02/11] clocksource: add generic dummy timer driver   Stephen Boyd
• [PATCHv4 03/11] ARM: smp: Remove duplicate dummy timer implementation   Stephen Boyd
• [PATCHv4 04/11] ARM: smp_twd: Divorce smp_twd from local timer API   Stephen Boyd
• [PATCHv4 05/11] ARM: OMAP2+: Divorce from local timer API   Stephen Boyd
• [PATCHv4 06/11] ARM: EXYNOS4: Divorce mct from local timer API   Stephen Boyd
• [PATCHv4 07/11] ARM: PRIMA2: Divorce timer-marco from local timer API   Stephen Boyd
• [PATCHv4 08/11] ARM: msm: Divorce msm_timer from local timer API   Stephen Boyd
• [PATCHv4 09/11] clocksource: time-armada-370-xp: Fix sparse warning   Stephen Boyd
• [PATCHv4 10/11] clocksource: time-armada-370-xp: Divorce from local timer API   Stephen Boyd
• [PATCHv4 11/11] ARM: smp: Remove local timer API   Stephen Boyd
• [PATCH 0/4] Memory mapped architected timers   Stephen Boyd
• [PATCH 1/4] Documentation: Add memory mapped ARM architected timer binding   Stephen Boyd
• [PATCH 2/4] ARM: arch_timers: Pass clock event to set_mode callback   Stephen Boyd
• [PATCH 3/4] clocksource: arch_timer: Push the read/write wrappers deeper   Stephen Boyd
• [PATCH 4/4] clocksource: arch_timer: Add support for memory mapped timers   Stephen Boyd
• [PATCH 3/4] clocksource: arch_timer: Push the read/write wrappers deeper   Stephen Boyd
• [PATCH 1/4] Documentation: Add memory mapped ARM architected timer binding   Stephen Boyd
• [PATCHv2] ARM: Push selects for TWD/SCU into machine entries   Stephen Boyd
• [PATCHv4 01/11] clockevents: Prefer CPU local devices over global devices   Stephen Boyd
• [PATCH] ARM: msm: Fix uncompess.h tx underrun check   Stephen Boyd
• [PATCH 1/4] Documentation: Add memory mapped ARM architected timer binding   Stephen Boyd
• [PATCH 1/4] Documentation: Add memory mapped ARM architected timer binding   Stephen Boyd
• [PATCHv2 0/4] Memory mapped architected timers   Stephen Boyd
• [PATCHv2 1/4] Documentation: Add memory mapped ARM architected timer binding   Stephen Boyd
• [PATCHv2 2/4] ARM: arch_timers: Pass clock event to set_mode callback   Stephen Boyd
• [PATCHv2 3/4] clocksource: arch_timer: Push the read/write wrappers deeper   Stephen Boyd
• [PATCHv2 4/4] clocksource: arch_timer: Add support for memory mapped timers   Stephen Boyd
• [PATCHv2] ARM: arch_timer: Silence debug preempt warnings   Stephen Boyd
• [PATCHv2 1/4] Documentation: Add memory mapped ARM architected timer binding   Stephen Boyd
• [GIT PULL] Timer clean-ups for 3.10, Part 2   Stephen Boyd
• [GIT PULL] Timer clean-ups for 3.10, Part 2   Stephen Boyd
• [PATCH v11 1/3] ARM: Add base support for ARMv7-M   Stephen Boyd
• [PATCH v11 1/3] ARM: Add base support for ARMv7-M   Stephen Boyd
• [PATCHv4 00/11] Remove ARM local timer API   Stephen Boyd
• [PATCH/RESEND] ARM: arch_timer: Silence debug preempt warnings   Stephen Boyd
• [PATCH] ARM: sched_clock: Add more notrace to prevent recursion   Stephen Boyd
• [RFC PATCH] drivers: bus: add ARM CCI support   Stephen Boyd
• [RFC PATCH] drivers: bus: add ARM CCI support   Stephen Boyd
• [PATCH 1/2] clocksource: arm_arch_timer: unify sched_clock init   Stephen Boyd
• [PATCHv5 00/11] Remove ARM local timer API   Stephen Boyd
• [PATCHv5 01/11] clockevents: Prefer CPU local devices over global devices   Stephen Boyd
• [PATCHv5 02/11] clocksource: add generic dummy timer driver   Stephen Boyd
• [PATCHv5 03/11] ARM: smp: Remove duplicate dummy timer implementation   Stephen Boyd
• [PATCHv5 04/11] ARM: smp_twd: Divorce smp_twd from local timer API   Stephen Boyd
• [PATCHv5 05/11] ARM: OMAP2+: Divorce from local timer API   Stephen Boyd
• [PATCHv5 06/11] ARM: EXYNOS4: Divorce mct from local timer API   Stephen Boyd
• [PATCHv5 07/11] ARM: PRIMA2: Divorce timer-marco from local timer API   Stephen Boyd
• [PATCHv5 08/11] ARM: msm: Divorce msm_timer from local timer API   Stephen Boyd
• [PATCHv5 09/11] clocksource: time-armada-370-xp: Fix sparse warning   Stephen Boyd
• [PATCHv5 10/11] clocksource: time-armada-370-xp: Divorce from local timer API   Stephen Boyd
• [PATCHv5 11/11] ARM: smp: Remove local timer API   Stephen Boyd
• [PATCH 1/2] clocksource: arm_arch_timer: unify sched_clock init   Stephen Boyd
• [PATCH 0/4] ARM 64 bit sched_clock take #2   Stephen Boyd
• [PATCH 1/4] ARM: sched_clock: Remove unused needs_suspend member   Stephen Boyd
• [PATCH 2/4] ARM: sched_clock: Return suspended count earlier   Stephen Boyd
• [PATCH 3/4] ARM: sched_clock: Add support for >32 bit sched_clock   Stephen Boyd
• [PATCH 4/4] ARM: arch_timer: Move to setup_sched_clock_64()   Stephen Boyd
• [PATCH 3/4] ARM: sched_clock: Add support for >32 bit sched_clock   Stephen Boyd
• [PATCH 0/4] ARM 64 bit sched_clock take #2   Stephen Boyd
• [PATCH 0/4] ARM 64 bit sched_clock take #2   Stephen Boyd
• [PATCH/RESEND] ARM: arch_timer: Silence debug preempt warnings   Stephen Boyd
• [PATCHv2 1/4] Documentation: Add memory mapped ARM architected timer binding   Stephen Boyd
• [PATCHv2 1/4] Documentation: Add memory mapped ARM architected timer binding   Stephen Boyd
• [PATCHv2 1/4] Documentation: Add memory mapped ARM architected timer binding   Stephen Boyd
• [PATCH 5/4] sched: Make ARM's sched_clock generic for all architectures   Stephen Boyd
• [PATCH 6/4] arm64: Move to generic sched_clock infrastructure   Stephen Boyd
• [PATCH] cpu_kill/cpu_die coordination   Kevin Bracey
• [PATCH] ARM: smp: call platform's cpu_die in ipi_cpu_stop   Kevin Bracey
• [PATCH] ARM: smp: call platform's cpu_die in ipi_cpu_stop   Kevin Bracey
• [PATCH] ARM: smp: call platform's cpu_die in ipi_cpu_stop   Kevin Bracey
• [PATCH 0/2] Support device_prep_dma_sg for pl330   Jassi Brar
• [PATCHv3 00/14] drivers: mailbox: framework creation   Jassi Brar
• [PATCHv3 00/14] drivers: mailbox: framework creation   Jassi Brar
• [PATCHv3 00/14] drivers: mailbox: framework creation   Jassi Brar
• [PATCHv3 00/14] drivers: mailbox: framework creation   Jassi Brar
• [PATCHv3 00/14] drivers: mailbox: framework creation   Jassi Brar
• [PATCHv3 00/14] drivers: mailbox: framework creation   Jassi Brar
• [PATCHv3 00/14] drivers: mailbox: framework creation   Jassi Brar
• [PATCHv3 00/14] drivers: mailbox: framework creation   Jassi Brar
• [GIT PULL] mailbox driver framework for v3.10 merge window   Jassi Brar
• [PATCHv3 00/14] drivers: mailbox: framework creation   Jassi Brar
• [RFC 3/3] mailbox: pl320: Introduce common API driver   Jassi Brar
• [RFC 3/3] mailbox: pl320: Introduce common API driver   Jassi Brar
• [PATCH] clk: divider: Introduce CLK_DIVIDER_ALLOW_ZERO flag   Soren Brinkmann
• [PATCH] clk: Properly handle notifier return values   Soren Brinkmann
• [PATCH] clk: Always notify whole subtree when reparenting   Soren Brinkmann
• [PATCH 0/7] Zynq: revised CCF code   Soren Brinkmann
• [PATCH 1/7] tty: xuartps: Sort #includes alphabetically   Soren Brinkmann
• [PATCH 2/7] tty: xuartps: Remove suspend/resume functions   Soren Brinkmann
• [PATCH 3/7] clocksource/cadence_ttc: Sort #includes alphabetically   Soren Brinkmann
• [PATCH 4/7] clk: zynq: Factor out PLL driver   Soren Brinkmann
• [PATCH 5/7] clk: zynq: Add clock controller driver   Soren Brinkmann
• [PATCH 6/7] arm: zynq: Migrate platform to clock controller   Soren Brinkmann
• [PATCH 7/7] clk: zynq: Remove deprecated clock code   Soren Brinkmann
• [PATCH RFC] clk: divider: Tolerate 0 divider for one based dividers   Sören Brinkmann
• [PATCH] clk: divider: Use DIV_ROUND_CLOSEST   Sören Brinkmann
• [PATCH] clk: divider: Introduce CLK_DIVIDER_ALLOW_ZERO flag   Sören Brinkmann
• [PATCH] clk: Always notify whole subtree when reparenting   Sören Brinkmann
• [PATCH 1/7] tty: xuartps: Sort #includes alphabetically   Sören Brinkmann
• [PATCH v3 6/7] USB: EHCI: make ehci-msm a separate driver   David Brown
• [GIT PULL] msm cleanup for 3.10   David Brown
• [GIT PULL] msm core for 3.10   David Brown
• [GIT PULL] msm defconfig for 3.10   David Brown
• [GIT PULL] msm fixes for 3.10   David Brown
• [PATCH 7/9] intel: cpuidle: remove stop/start critical timings   Len Brown
• [PATCH 03/13] ASoC: mxs-saif: remove mach header inclusion   Mark Brown
• [PATCH V3 4/5] spi: s3c64xx: Added provision for dedicated cs pin   Mark Brown
• [PATCH V3 1/5] spi: s3c64xx: modified error interrupt handling and init   Mark Brown
• [PATCH V3 2/5] spi: s3c64xx: added support for polling mode   Mark Brown
• [PATCH v7 01/14] spi/spi-atmel: detect the capabilities of SPI core by reading the VERSION register.   Mark Brown
• [PATCH v7 02/14] spi/spi-atmel: add support transfer on CS1, 2, 3, not only on CS0   Mark Brown
• [PATCH v7 03/14] spi/spi-atmel: add physical base address   Mark Brown
• [PATCH v7 04/14] spi/spi-atmel: call unmapping on transfers buffers   Mark Brown
• [PATCH v7 05/14] spi/spi-atmel: status information passed through controller data   Mark Brown
• [PATCH v7 06/14] spi/spi-atmel: add flag to controller data for lock operations   Mark Brown
• [PATCH v7 08/14] spi/spi-atmel: fix spi-atmel driver to adapt to slave_config changes   Mark Brown
• [PATCH v7 09/14] spi/spi-atmel: correct 16 bits transfers using PIO   Mark Brown
• [PATCH v7 10/14] spi/spi-atmel: correct 16 bits transfers with DMA   Mark Brown
• [PATCH] ARM: ux500: update V-INTCORE constraints   Mark Brown
• [PATCH] ARM: ux500: update V-INTCORE constraints   Mark Brown
• [PATCH 1/2] dmaengine: add const for name parameter   Mark Brown
• [PATCH V3 2/5] spi: s3c64xx: added support for polling mode   Mark Brown
• [PATCH 1/2] ASoC: Samsung: return error if drvdata is not set   Mark Brown
• regulator: query on regulator re-entrance   Mark Brown
• PWM backlight build warning   Mark Brown
• [PATCH] regulator: mc13783: Add device tree probe support   Mark Brown
• [PATCH V3 4/5] spi: s3c64xx: Added provision for dedicated cs pin   Mark Brown
• [PATCH V3 4/5] spi: s3c64xx: Added provision for dedicated cs pin   Mark Brown
• [PATCH V3 4/5] spi: s3c64xx: Added provision for dedicated cs pin   Mark Brown
• [PATCH 20/30] ASoC: samsung: convert to dmaengine API   Mark Brown
• [PATCH 20/30] ASoC: samsung: convert to dmaengine API   Mark Brown
• [PATCH v4 04/14] mfd: Add Samsung PWM/timer master driver   Mark Brown
• [PATCH 18/30] ASoC: samsung: move plat/ headers to local directory   Mark Brown
• [PATCH 19/30] ASoC: samsung: use irq resource for idma   Mark Brown
• [PATCH 21/30] ASoC: samsung/i2s: fix module_device_table   Mark Brown
• [PATCH 22/30] ASoC: samsung/idma: export idma_reg_addr_init   Mark Brown
• [PATCH 29/30] spi: s3c64xx: move to generic dmaengine API   Mark Brown
• [PATCH 18/30] ASoC: samsung: move plat/ headers to local directory   Mark Brown
• [alsa-devel] [PATCH 18/30] ASoC: samsung: move plat/ headers to local directory   Mark Brown
• [PATCH] ASoC: samsung: fix neo1973-wm8753 compilation   Mark Brown
• [PATCH v2] spi: s3c64xx: move to generic dmaengine API   Mark Brown
• [alsa-devel] [PATCH 20/30] ASoC: samsung: convert to dmaengine API   Mark Brown
• [PATCH v2] UCB1400: Pass ucb1400-gpio data through ac97 bus   Mark Brown
• [RFC v1] regulator: core: introduce regulator chain locking scheme   Mark Brown
• [PATCH v2 05/11] ASoC: fsl-ssi: Add support for imx-pcm-fiq   Mark Brown
• [RFC v1] regulator: core: introduce regulator chain locking scheme   Mark Brown
• [PATCH V4 2/5] spi: s3c64xx: added support for polling mode   Mark Brown
• [PATCH v3 05/15] ASoC: phycore-ac97: Add DT support   Mark Brown
• [PATCH v3 08/15] ASoC: fsl-ssi: Add SACNT definitions   Mark Brown
• [PATCH V4 2/5] spi: s3c64xx: added support for polling mode   Mark Brown
• [PATCH V3 RESEND 3/5] spi: s3c64xx: Added provision for non-gpio i/o's   Mark Brown
• [PATCH v5 00/14] ARM: samsung-time: Prepare for multiplatform support   Mark Brown
• [PATCH v5 2/6] ARM: s3c64xx: Skip legacy EINT setup if pinctrl-s3c64xx driver is present   Mark Brown
• [PATCH v5 3/6] gpio: samsung: Skip legacy GPIO registration if pinctrl-s3c64xx is present   Mark Brown
• [PATCH v5 0/6] Initial Device Tree support for S3C64xx   Mark Brown
• [PATCH v5 3/6] gpio: samsung: Skip legacy GPIO registration if pinctrl-s3c64xx is present   Mark Brown
• [PATCH v5 0/6] Initial Device Tree support for S3C64xx   Mark Brown
• [PATCH v3 00/15] ASoC: fsl-ssi: ac97-slave support   Mark Brown
• [PATCH v2] spi: s3c64xx: move to generic dmaengine API   Mark Brown
• [alsa-devel] [PATCH v4 02/10] ASoC: imx-pcm-dma: DT support   Mark Brown
• [PATCH 29/30] spi: s3c64xx: move to generic dmaengine API   Mark Brown
• [PATCH 13/23] regulator: ab3100: refactor probe to use IDs   Mark Brown
• [PATCH 2/3] spi: s3c64xx: Added provision for dedicated cs pin   Mark Brown
• [PATCH 1/3] spi: s3c64xx: added support for polling mode   Mark Brown
• [PATCH] ASoC: don't call of_dma_request_slave_channel directly   Mark Brown
• [PATCH 08/21] ASoC: ux500: forward declare msp_i2s_platform_data   Mark Brown
• [PATCH 09/21] spi/sirf: fix MODULE_DEVICE_TABLE   Mark Brown
• [PATCH v8 1/8] spi/spi-atmel: add physical base address   Mark Brown
• [PATCH v8 2/8] spi/spi-atmel: add flag to controller data for lock operations   Mark Brown
• [PATCH v8 3/8] spi/spi-atmel: add dmaengine support   Mark Brown
• [PATCH 13/23] regulator: ab3100: refactor probe to use IDs   Mark Brown
• [PATCH 14/23] regulator: ab3100: device tree support   Mark Brown
• [PATCH v8 3/8] spi/spi-atmel: add dmaengine support   Mark Brown
• [PATCH v8 4/8] spi/spi-atmel: BUG: fix doesn' support 16 bits transfers using PIO   Mark Brown
• [PATCH v8 5/8] ARM: at91: add clocks for spi dt entries   Mark Brown
• [PATCH v8 6/8] ARM: dts: add spi nodes for atmel SoC   Mark Brown
• [PATCH v8 7/8] ARM: dts: add spi nodes for the atmel boards   Mark Brown
• [PATCH v8 8/8] ARM: dts: add pinctrl property for spi node for atmel SoC   Mark Brown
• [PATCH 15/23] ARM: u300: set up board power from device tree   Mark Brown
• [PATCH v2 1/2] regulator: mc13xxx: Add warning of incorrect names of regulators   Mark Brown
• [alsa-devel] [PATCH] MAINTAINERS: Add linux-samsung-soc list to all related entries   Mark Brown
• [PATCH] remove vlan tags in CPSW dual emac mode   Markus Brunner
• iMX28 DTS GPIO IRQ Definition   Ryan Bryngelson
• iMX28 DTS GPIO IRQ Definition   Ryan Bryngelson
• [PATCH] cpuimx27 and mbimx27: prepend CONFIG_ to Kconfig macro   Eric Bénard
• [PATCH 1/3] ARM: mx28: add auart2 2 pins pinmux to imx28.dtsi   Eric Bénard
• [PATCH 2/3] ARM: mx28: add auart3 2 pins pinmux to imx28.dtsi   Eric Bénard
• [PATCH 3/3] ARM: mx28: add auart4 2 pins pinmux to imx28.dtsi   Eric Bénard
• [PATCH v3 2/2] video: imxfb: Add DT support   Eric Bénard
• [PATCH] ARM: mx28: add dma channels for all auarts   Eric Bénard
• [PATCH] ARM: mx28: add dma channels for all auarts   Eric Bénard
• [RFC/PATCH v2 2/2] drivers: dma-contiguous: add initialization from device tree   Marc C
• [PATCH] pinctrl: move subsystem mutex to pinctrl_dev struct   Patrice CHOTARD
• [PATCH] arm: mvebu: Fix the memory size on the Mirabox   Gregory CLEMENT
• [PATCH v2 1/7] clk: sunxi: Add support for AXI, AHB, APB0 and APB1 gates   Gregory CLEMENT
• [PATCH 3.9-rc6] arm: mvebu: Fix the irq map function in SMP mode   Gregory CLEMENT
• [PATCH] arm: mvebu: Fix the irq map function in SMP mode   Gregory CLEMENT
• [PATCH v2 0/9] rm: mvebu: Enable LPAE support for Armada XP SoCs   Gregory CLEMENT
• [PATCH v2 1/9] arm: mvebu: Limit the DMA zone when LPAE is selected   Gregory CLEMENT
• [PATCH v2 2/9] arm: mvebu: Align the internal registers virtual base to support LPAE   Gregory CLEMENT
• [PATCH v2 3/9] arm: mvebu: Enable pj4b on LPAE compilations   Gregory CLEMENT
• [PATCH v2 4/9] arm: dts: Add a 64 bits version of the skeleton device tree   Gregory CLEMENT
• [PATCH v2 5/9] arm: dts: mvebu: move all peripherals inside soc   Gregory CLEMENT
• [PATCH v2 6/9] arm: dts: mvebu: Convert all the mvebu files to use the range property   Gregory CLEMENT
• [PATCH v2 7/9] arm: dts: mvebu: introduce internal-regs node   Gregory CLEMENT
• [PATCH v2 8/9] arm: dts: mvebu: fix cpus section indentation   Gregory CLEMENT
• [PATCH v2 9/9] arm: dts: mvebu: Convert mvebu device tree files to 64 bits   Gregory CLEMENT
• [PATCH v2 7/9] arm: dts: mvebu: introduce internal-regs node   Gregory CLEMENT
• [PATCH v2 1/9] arm: mvebu: Limit the DMA zone when LPAE is selected   Gregory CLEMENT
• [PATCH v2 0/9] rm: mvebu: Enable LPAE support for Armada XP SoCs   Gregory CLEMENT
• [PATCH v2 2/9] arm: mvebu: Align the internal registers virtual base to support LPAE   Gregory CLEMENT
• [PATCH] ARM: makefile: add tuning options for Armada 370/XP   Gregory CLEMENT
• [PATCH v3 0/9] ARM: mvebu: Enable LPAE support for Armada XP SoCs   Gregory CLEMENT
• [PATCH v3 1/9] ARM: dts: mvebu: fix cpus section indentation   Gregory CLEMENT
• [PATCH v3 2/9] ARM: mvebu: Limit the DMA zone when LPAE is selected   Gregory CLEMENT
• [PATCH v3 3/9] ARM: mvebu: Align the internal registers virtual base to support LPAE   Gregory CLEMENT
• [PATCH v3 4/9] ARM: mvebu: Enable pj4b on LPAE compilations   Gregory CLEMENT
• [PATCH v3 5/9] ARM: dts: Add a 64 bits version of the skeleton device tree   Gregory CLEMENT
• [PATCH v3 6/9] ARM: dts: mvebu: move all peripherals inside soc   Gregory CLEMENT
• [PATCH v3 7/9] ARM: dts: mvebu: Convert all the mvebu files to use the range property   Gregory CLEMENT
• [PATCH v3 8/9] ARM: dts: mvebu: introduce internal-regs node   Gregory CLEMENT
• [PATCH v3 9/9] ARM: dts: mvebu: Convert mvebu device tree files to 64 bits   Gregory CLEMENT
• [PATCH 0/3] sunxi: unify main oscillator and its gate   Gregory CLEMENT
• [PATCH 1/3] clk: composite: Add fixed-rate support   Gregory CLEMENT
• [PATCH] clk: Add device tree binding to clk-fixed-factor   Gregory CLEMENT
• [PATCH] clk: Add device tree binding to clk-fixed-factor   Gregory CLEMENT
• [PATCH v3 4/9] ARM: mvebu: Enable pj4b on LPAE compilations   Gregory CLEMENT
• [PATCH v3 5/9] ARM: dts: Add a 64 bits version of the skeleton device tree   Gregory CLEMENT
• [PATCH] clk: Add device tree binding to clk-fixed-factor   Gregory CLEMENT
• [PATCH] clk: Add device tree binding to clk-fixed-factor   Gregory CLEMENT
• [PATCH] clk: Add device tree binding to clk-fixed-factor   Gregory CLEMENT
• [PATCH v2] clk: add device tree fixed-factor-clock binding support   Gregory CLEMENT
• [PATCH v2] clk: add device tree fixed-factor-clock binding support   Gregory CLEMENT
• [PATCH v2] clk: add device tree fixed-factor-clock binding support   Gregory CLEMENT
• [PATCH v3] clk: add device tree fixed-factor-clock binding support   Gregory CLEMENT
• [PATCH v3] clk: add device tree fixed-factor-clock binding support   Gregory CLEMENT
• [PATCH v4 0/5] LPAE remaining device tree file   Gregory CLEMENT
• [PATCH v4 1/5] ARM: dts: mvebu: fix cpus section indentation   Gregory CLEMENT
• [PATCH v4 2/5] ARM: dts: mvebu: move all peripherals inside soc   Gregory CLEMENT
• [PATCH v4 3/5] ARM: dts: mvebu: Convert all the mvebu files to use the range property   Gregory CLEMENT
• [PATCH v4 4/5] ARM: dts: mvebu: introduce internal-regs node   Gregory CLEMENT
• [PATCH v4 5/5] ARM: dts: mvebu: Convert mvebu device tree files to 64 bits   Gregory CLEMENT
• net: mvneta: fix improper tx queue usage in mvneta_tx()   Gregory CLEMENT
• [PATCH v4 0/5] LPAE remaining device tree file   Gregory CLEMENT
• [PATCH] ARM: Orion: Remove redundent init_dma_coherent_pool_size()   Gregory CLEMENT
• [PATCH RFC] Fix bug if earlyprintk is called twice   Gregory CLEMENT
• [PATCH RFC] ARM: don't allow to register the early_console twice   Gregory CLEMENT
• [GIT PULL V2 1/4] mvebu driver changes for v3.10   Gregory CLEMENT
• MVEBU and MVNETA driver   Gregory CLEMENT
• [GIT PULL V2 1/4] mvebu driver changes for v3.10   Gregory CLEMENT
• [GIT PULL V3 1/4] mvebu driver changes for v3.10   Gregory CLEMENT
• [PATCH 05/21] atm: he: use mdelay instead of large udelay constants   chas williams - CONTRACTOR
• [PATCH] ARM: at91: dts: add adc resolution stuff   Jonathan Cameron
• [PATCH 1/3] iio: at91_adc: add low and high res support   Jonathan Cameron
• [PATCH 2/3] iio: at91_adc: add sleep mode support   Jonathan Cameron
• [PATCH 3/3] iio: at91_adc: fix missing Sample and Hold time   Jonathan Cameron
• [PATCH 1/3] iio: Add Nuvoton NAU7802 ADC driver   Jonathan Cameron
• [PATCH 1/3] iio: Add Nuvoton NAU7802 ADC driver   Jonathan Cameron
• hypervisor/firmware calling conventions (Was: Re: [Xen-devel] [PATCH 1/4] xen/arm: basic PSCI support, implement cpu_on)   Ian Campbell
• hypervisor/firmware calling conventions (Was: Re: [Xen-devel] [PATCH 1/4] xen/arm: basic PSCI support, implement cpu_on)   Ian Campbell
• [PATCH] arm64: remove PSR bit macros from uapi   Ian Campbell
• [PATCH] arm64: remove PSR bit macros from uapi   Ian Campbell
• [Xen-devel] [PATCH] arm64: remove PSR bit macros from uapi   Ian Campbell
• [Xen-devel] [PATCH] arm64: remove PSR bit macros from uapi   Ian Campbell
• [Xen-devel] [PATCH] arm64: remove PSR bit macros from uapi   Ian Campbell
• [Xen-devel] [PATCH v6 1/4] arm: introduce psci_smp_ops   Ian Campbell
• [Xen-devel] [PATCH v6 1/4] arm: introduce psci_smp_ops   Ian Campbell
• [Xen-devel] [PATCH v6 1/4] arm: introduce psci_smp_ops   Ian Campbell
• [RFC] device-tree.git automatic sync from linux.git   Ian Campbell
• [Xen-devel] [PATCH v6 1/4] arm: introduce psci_smp_ops   Ian Campbell
• [PATCH v4 2/7] xen/arm: SMP support   Ian Campbell
• [PATCH v4 4/7] xen/arm: implement HYPERVISOR_vcpu_op   Ian Campbell
• [PATCH v4 1/7] xen/arm: actually pass a non-NULL percpu pointer to request_percpu_irq   Ian Campbell
• [PATCH v4 2/7] xen/arm: SMP support   Ian Campbell
• [PATCH v4 2/7] xen/arm: SMP support   Ian Campbell
• [PATCH v4 2/7] xen/arm: SMP support   Ian Campbell
• [RFC][BUG] arm/dts: OMAP3: set #interrupt-cells to two   Javier Martinez Canillas
• [RFC 1/1] of/irq: store IRQ trigger/level in struct resource flags   Javier Martinez Canillas
• [PATCH 1/1] of/irq: store IRQ trigger/level in struct resource flags   Javier Martinez Canillas
• [PATCH 1/1] of/irq: store IRQ trigger/level in struct resource flags   Javier Martinez Canillas
• [PATCH 1/1] of/irq: store IRQ trigger/level in struct resource flags   Javier Martinez Canillas
• [PATCH 1/1] of/irq: store IRQ trigger/level in struct resource flags   Javier Martinez Canillas
• [PATCH 1/1] of/irq: store IRQ trigger/level in struct resource flags   Javier Martinez Canillas
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Javier Martinez Canillas
• [RFC][BUG] arm/dts: OMAP3: set #interrupt-cells to two   Javier Martinez Canillas
• [RFC][BUG] arm/dts: OMAP3: set #interrupt-cells to two   Javier Martinez Canillas
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Javier Martinez Canillas
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Javier Martinez Canillas
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Javier Martinez Canillas
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Javier Martinez Canillas
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Javier Martinez Canillas
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Javier Martinez Canillas
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Javier Martinez Canillas
• [PATCH 1/1] of/irq: store IRQ trigger/level in struct resource flags   Javier Martinez Canillas
• [PATCH] arm: mm: lockless get_user_pages_fast   Steve Capper
• [PATCH] arm: mm: lockless get_user_pages_fast   Steve Capper
• [PATCH] arm: mm: lockless get_user_pages_fast   Steve Capper
• [PATCH] ARM64: mm: Correct show_pte behaviour.   Steve Capper
• [PATCH] ARM64: mm: Correct show_pte behaviour.   Steve Capper
• [RFC PATCH 0/9] HugeTLB and THP support for ARM64.   Steve Capper
• [RFC PATCH 1/9] mm: hugetlb: Copy huge_pmd_share from x86 to mm.   Steve Capper
• [RFC PATCH 2/9] x86: mm: Remove x86 version of huge_pmd_share.   Steve Capper
• [RFC PATCH 3/9] mm: hugetlb: Copy general hugetlb code from x86 to mm.   Steve Capper
• [RFC PATCH 4/9] x86: mm: Remove general hugetlb code from x86.   Steve Capper
• [RFC PATCH 5/9] ARM64: mm: Add support for flushing huge pages.   Steve Capper
• [RFC PATCH 6/9] ARM64: mm: Restore memblock limit when map_mem finished.   Steve Capper
• [RFC PATCH 7/9] ARM64: mm: HugeTLB support.   Steve Capper
• [RFC PATCH 8/9] ARM64: mm: Introduce MAX_ZONE_ORDER for 64K and THP.   Steve Capper
• [RFC PATCH 9/9] ARM64: mm: THP support.   Steve Capper
• [PATCHv2 6/6] video: fb: vt8500: Convert framebuffer drivers to standardized binding   Alexey Charkov
• [PATCH v8 0/2] ARM: davinci: dm355: add support for vpbe display   Mauro Carvalho Chehab
• [PATCH v8 0/2] ARM: davinci: dm355: add support for vpbe display   Mauro Carvalho Chehab
• [PATCH 11/30] [media] exynos: remove unnecessary header inclusions   Mauro Carvalho Chehab
• [PATCH 0/2] mm: vmemmap: add vmemmap_verify check for hot-add node/memory case   Tang Chen
• [PATCH 0/2] mm: vmemmap: add vmemmap_verify check for hot-add node/memory case   Tang Chen
• [PATCH V6 0/9] Add mandatory regulator for all users of pwm-backlight.   Andrew Chew
• [PATCH V6 1/9] ARM: OMAP: board-4430sdp: Provide regulator to pwm-backlight   Andrew Chew
• [PATCH V6 2/9] ARM: S3C24XX: Provide regulator to pwm-backlight   Andrew Chew
• [PATCH V6 3/9] ARM: pxa: Provide regulator to pwm-backlight   Andrew Chew
• [PATCH V6 4/9] ARM: EXYNOS: Provide regulator to pwm-backlight   Andrew Chew
• [PATCH V6 5/9] unicore32: Provide regulator to pwm-backlight   Andrew Chew
• [PATCH V6 6/9] ARM: mxs: Provide regulator to pwm-backlight   Andrew Chew
• [PATCH V6 7/9] ARM: vt8500: Provide regulator to pwm-backlight   Andrew Chew
• [PATCH V6 8/9] ARM: tegra: Provide regulator to pwm-backlight   Andrew Chew
• [PATCH V6 9/9] pwm_bl: Add mandatory backlight power regulator   Andrew Chew
• [PATCH] KVM: ARM: Fix wrong address in comment   Jonghwan Choi
• Problem porting driver for OTP cells on Freescale i.MX28   Christoph
• Patch for Crypto-Cop​rocesor (DCP) on Freescale​ i.MX28​   Christoph
• Latest randconfig build errors   Rob Clark
• Latest randconfig build errors   Rob Clark
• [PATCH 11/21] drm/tilcdc: use only a single module device table   Rob Clark
• [alsa-devel] [PATCH v2 00/11] ASoC: fsl-ssi: ac97-slave support   Lars-Peter Clausen
• [alsa-devel] [PATCH v2 00/11] ASoC: fsl-ssi: ac97-slave support   Lars-Peter Clausen
• [alsa-devel] [PATCH 18/30] ASoC: samsung: move plat/ headers to local directory   Lars-Peter Clausen
• [PATCH] SPI: spidev: Add DT compatible string for spidev driver.   Lars-Peter Clausen
• [alsa-devel] [PATCH 20/30] ASoC: samsung: convert to dmaengine API   Lars-Peter Clausen
• [alsa-devel] [PATCH v2 00/11] ASoC: fsl-ssi: ac97-slave support   Lars-Peter Clausen
• [PATCH v3 00/15] ASoC: fsl-ssi: ac97-slave support   Lars-Peter Clausen
• [PATCH v3 00/15] ASoC: fsl-ssi: ac97-slave support   Lars-Peter Clausen
• [alsa-devel] [PATCH v4 02/10] ASoC: imx-pcm-dma: DT support   Lars-Peter Clausen
• [PATCH RESEND v5 1/2] dma: imx-dma: Add oftree support   Lars-Peter Clausen
• [PATCH 1/3] iio: Add Nuvoton NAU7802 ADC driver   Lars-Peter Clausen
• [RFC/PATCH 1/4] arm64: Provide default implementation for dma_{alloc, free}_attrs   Lars-Peter Clausen
• [PATCH 0/3] add devicetree bindings for rtc-m48t86   Alexander Clouter
• [PATCHv2 0/6] add devicetree bindings for rtc-m48t86   Alexander Clouter
• [PATCH 1/6] rtc: rtc-m48t86: move m48t86.h to platform_data   Alexander Clouter
• [PATCH 2/6] rtc: rtc-m48t86: add hooks to support driver side memory mapping   Alexander Clouter
• [PATCH 3/6] rtc: rtc-m48t86: add detect method for RTC   Alexander Clouter
• [PATCH 4/6] arm: orion5x: move ts78xx to use rtc-m48t86 driver side memory interface   Alexander Clouter
• [PATCH 5/6] arm: ep93xx: move ts72xx to use rtc-m48t86 driver side memory interface   Alexander Clouter
• [PATCH 6/6] rtc: rtc-m48t86: add devicetree bindings   Alexander Clouter
• [PATCH 2/6] rtc: rtc-m48t86: add hooks to support driver side memory mapping   Alexander Clouter
• [PATCHv2 2/6] rtc: rtc-m48t86: add hooks to support driver side memory mapping   Alexander Clouter
• [PATCH 0/3] WLAN support for omap4 when booted with devicetree   Luciano Coelho
• [PATCH 1/3] ARM: OMAP2+: Legacy support for wl12xx when booted with devicetree   Luciano Coelho
• [PATCH 3/3] ARM: dts: Add muxing for wl12xx on the SDIO bus for blaze   Luciano Coelho
• [PATCH 1/3] ARM: OMAP2+: Legacy support for wl12xx when booted with devicetree   Luciano Coelho
• [PATCH 1/3] ARM: OMAP2+: Legacy support for wl12xx when booted with devicetree   Luciano Coelho
• [PATCH 2/3] ARM: dts: Add muxing for wl12xx on the SDIO bus for pandaboard   Luciano Coelho
• How to represent negative values for device tree property   David Collins
• How to represent negative values for device tree property   David Collins
• [PATCH V2 1/3] seccomp: add generic code for jitted seccomp filters.   Kees Cook
• [PATCH] Fix typo in the definition of ix2-200 rebuild LED   Jason Cooper
• [PATCH 0/3] add devicetree bindings for rtc-m48t86   Jason Cooper
• [PATCH] ARM: kirkwood: DT board setup for CloudBox   Jason Cooper
• [PATCH 4/6] arm: orion5x: move ts78xx to use rtc-m48t86 driver side memory interface   Jason Cooper
• [PATCH] ARM: kirkwood: DT board setup for CloudBox   Jason Cooper
• [PATCH v3] ARM: dove: add more hardware description in the DT   Jason Cooper
• [RFC PATCHv1 2/5] bus: mvebu: fix mistake in PCIe window target attribute for Kirkwood   Jason Cooper
• [PATCH] ARM: kirkwood: DT board setup for CloudBox   Jason Cooper
• [PATCH] ARM: kirkwood: DT board setup for CloudBox   Jason Cooper
• [PATCH v4 0/5] Device Bus support for Marvell EBU SoC   Jason Cooper
• [PATCH v4 0/5] Device Bus support for Marvell EBU SoC   Jason Cooper
• [PATCH RESEND v2 1/1] ARM Feroceon: fix kexec by setting outer_cache.inv_all   Jason Cooper
• [PATCH 2/2] Fix GE0/GE1 init on ix2-200 as GE0 has no PHY   Jason Cooper
• [PATCH] arm: mvebu: Fix the irq map function in SMP mode   Jason Cooper
• [GIT PULL] ARM: mvebu: fixes for v3.9 (round 3)   Jason Cooper
• [PATCH v2 0/3] Add DT board setup for LaCie CloudBox   Jason Cooper
• [PATCHv1 0/5] Marvell EBU irqchip improvements   Jason Cooper
• [PATCH v7 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Jason Cooper
• [PATCHv2 08/10] arm: kirkwood: convert QNAP TS219 to use DT for the PCIe interface   Jason Cooper
• [PATCH 0/5 v2] mv643xx_eth: device tree bindings   Jason Cooper
• [PATCHv2 02/10] bus: mvebu: fix mistake in PCIe window target attribute for Kirkwood   Jason Cooper
• [PATCH v7 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Jason Cooper
• [PATCH v7 2/5] ARM: mvebu: Add Device Bus support for Armada 370/XP SoC   Jason Cooper
• [PATCH v3 2/9] ARM: mvebu: Limit the DMA zone when LPAE is selected   Jason Cooper
• [PATCH v3 3/9] ARM: mvebu: Align the internal registers virtual base to support LPAE   Jason Cooper
• [PATCH v3 4/9] ARM: mvebu: Enable pj4b on LPAE compilations   Jason Cooper
• [PATCH v3 5/9] ARM: dts: Add a 64 bits version of the skeleton device tree   Jason Cooper
• [PATCH v3 4/9] ARM: mvebu: Enable pj4b on LPAE compilations   Jason Cooper
• [PATCH v3 5/9] ARM: dts: Add a 64 bits version of the skeleton device tree   Jason Cooper
• [PATCHv8 12/19] arm: mvebu: add PCIe Device Tree informations for Armada 370   Jason Cooper
• [PATCHv8 12/19] arm: mvebu: add PCIe Device Tree informations for Armada 370   Jason Cooper
• [PATCH 0/5 v2] mv643xx_eth: device tree bindings   Jason Cooper
• [PATCHv2 04/10] arm: kirkwood: add SoC-level Device Tree data for PCIe interfaces   Jason Cooper
• [PATCH 0/5 v2] mv643xx_eth: device tree bindings   Jason Cooper
• [PATCHv8 00/19] PCIe support for the Armada 370 and Armada XP SoCs   Jason Cooper
• [PATCH v4 0/5] LPAE remaining device tree file   Jason Cooper
• [PATCHv3 01/10] pci: mvebu: enable driver usage on Kirkwood   Jason Cooper
• [PATCHv8 07/19] arm: pci: add a align_resource hook   Jason Cooper
• [PATCHv8 00/19] PCIe support for the Armada 370 and Armada XP SoCs   Jason Cooper
• [PATCH v6 0/3] of/pci: Provide common support for PCI DT parsing   Jason Cooper
• [GIT PULL 1/4] mvebu driver changes for v3.10   Jason Cooper
• [GIT PULL 2/4] mvebu soc for v3.10   Jason Cooper
• [PATCH v6 0/3] of/pci: Provide common support for PCI DT parsing   Jason Cooper
• [GIT PULL 3/4] mvebu boards for v3.10   Jason Cooper
• [GIT PULL 4/4] mvebu dt for v3.10   Jason Cooper
• [GIT PULL] mvebu dt (LPAE) for v3.10   Jason Cooper
• [PATCHv1 0/5] Marvell EBU irqchip improvements   Jason Cooper
• [GIT PULL] mvebu irqchip for v3.10   Jason Cooper
• [PATCH v6 0/3] of/pci: Provide common support for PCI DT parsing   Jason Cooper
• [PATCH v6 0/3] of/pci: Provide common support for PCI DT parsing   Jason Cooper
• [GIT PULL V2 1/4] mvebu driver changes for v3.10   Jason Cooper
• [PATCH v7 0/3] of/pci: Provide common support for PCI DT parsing   Jason Cooper
• [PATCHv8 07/19] arm: pci: add a align_resource hook   Jason Cooper
• [PATCH v7 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC   Jason Cooper
• [PATCH v7 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC   Jason Cooper
• [PATCHv3 00/10] Use the mvebu PCIe driver on Kirkwood   Jason Cooper
• [PATCH] ARM: Orion: Remove redundent init_dma_coherent_pool_size()   Jason Cooper
• [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Jason Cooper
• [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Jason Cooper
• [PATCH v7 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC   Jason Cooper
• [PATCH v7 3/3] of/pci: mips: convert to common of_pci_range_parser   Jason Cooper
• [GIT PULL V3 1/4] mvebu driver changes for v3.10   Jason Cooper
• [PATCH v7 3/3] of/pci: mips: convert to common of_pci_range_parser   Jason Cooper
• [PATCH v8 0/3] of/pci: Provide common support for PCI DT parsing   Jason Cooper
• [PATCH 1/3] mmc: mvsdio: Support inverted CD and WP GPIO lines   Jason Cooper
• [PATCH 1/3] mmc: mvsdio: Support inverted CD and WP GPIO lines   Jason Cooper
• [PATCH v8 0/3] of/pci: Provide common support for PCI DT parsing   Jason Cooper
• [PATCHv1 3/3] hwmon: Add DT documentation for g762 driver   Jason Cooper
• [PATCH] cpuidle: add maintainer entry   Jason Cooper
• [PATCH 04/21] ARM: orion5x: include linux/cpu.h   Jason Cooper
• [PATCH 04/21] ARM: orion5x: include linux/cpu.h   Jason Cooper
• [PATCH] ARM: dove: fix Dove cpu type from V7 to PJ4   Jason Cooper
• [PATCH] Kirkwood: Enable PCIe port 1 on QNAP TS-11x/TS-21x   Jason Cooper
• [PATCH] Kirkwood: Enable PCIe port 1 on QNAP TS-11x/TS-21x   Jason Cooper
• Need help to measure and tune the latency in Linux RT   Jason Cooper
• [PATCH 0/3] gpio: remove GENERIC_GPIO completely   Alexandre Courbot
• [PATCH] gpio: update gpio Chinese documentation   Alexandre Courbot
• GENERIC_GPIO considered deprecated   Alexandre Courbot
• [PATCH 0/5] ARM: OMAP: DMTIMER updates for v3.10   Benoit Cousson
• [PATCH] ARM: dts: OMAP4+: Correct L3 interrupts   Benoit Cousson
• [PATCH] ARM: dts: OMAP4+: Correct L3 interrupts   Benoit Cousson
• [PATCH v4 00/21] ARM: OMAP2+: Adapt to ehci-omap changes for 3.10   Benoit Cousson
• [PATCH v4 00/21] ARM: OMAP2+: Adapt to ehci-omap changes for 3.10   Benoit Cousson
• [PATCH v4 00/21] ARM: OMAP2+: Adapt to ehci-omap changes for 3.10   Benoit Cousson
• [PATCH 1/3] ARM: dts: Update OMAP3430 SDP NAND and ONENAND properties   Benoit Cousson
• [GIT PULL] ARM: OMAP: Device Tree for 3.10   Benoit Cousson
• [PATCH] ARM: OMAP4: HWMOD: make 'ocp2scp_usb_phy_phy_48m" as the main clock   Benoit Cousson
• [Suggestion] ARM64:kernel: compiling issue for early_console.   Christopher Covington
• [PATCH] arm64: Fix task tracing   Christopher Covington
• [PATCH] arm64: Fix task tracing   Christopher Covington
• [PATCH v2] arm64: Fix task tracing   Christopher Covington
• [PATCH v2] arm64: Fix task tracing   Christopher Covington
• [PATCH v2] arm64: Fix task tracing   Christopher Covington
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Christopher Covington
• [PATCH v3 1/4] arm: Move the set_handle_irq and handle_arch_irq declarations to asm/irq.h   Christopher Covington
• [RFC PATCH 1/3] pstore-ram: use write-combine mappings   Colin Cross
• [RFC PATCH 3/3] pstore/ram: avoid atomic accesses for ioremapped regions   Colin Cross
• [PATCH 05/18] cpuidle: make a single register function for all   Colin Cross
• [RFC PATCH 1/3] pstore-ram: use write-combine mappings   Colin Cross
• [RFC PATCH 1/3] pstore-ram: use write-combine mappings   Colin Cross
• [PATCH] ARM: imx: add lvds clocks   Sean Cross
• [PATCH] I2C: EXYNOS5: Set up the TX FIFO and RX FIFO for HSI2C   Yuvaraj Kumar C D
• [PATCH] I2C: EXYNOS: High speed mode clock setting for HSI2C   Yuvaraj Kumar C D
• [PATCH] module: fix mutiple defined issue   Inki Dae
• [PATCH] module: fix mutiple defined issue   Inki Dae
• [PATCH] module: fix mutiple defined issue   Inki Dae
• [PATCH 1/7] ARM: KVM: simplify HYP mapping population   Christoffer Dall
• [PATCH 2/7] ARM: KVM: fix HYP mapping limitations around zero   Christoffer Dall
• [PATCH 3/7] ARM: KVM: move to a KVM provided HYP idmap   Christoffer Dall
• [PATCH 4/7] ARM: KVM: enforce page alignment for identity mapped code   Christoffer Dall
• [PATCH 5/7] ARM: KVM: parametrize HYP page table freeing   Christoffer Dall
• [PATCH 6/7] ARM: KVM: switch to a dual-step HYP init code   Christoffer Dall
• [PATCH 6/7] ARM: KVM: switch to a dual-step HYP init code   Christoffer Dall
• [PATCH 7/7] ARM: KVM: perform HYP initilization for hotplugged CPUs   Christoffer Dall
• [PATCH] ARM: KVM: fix KVM_CAP_ARM_SET_DEVICE_ADDR reporting   Christoffer Dall
• [PATCH 0/7] ARM: KVM: Revamping the HYP init code for fun and profit   Christoffer Dall
• [PATCH 2/5] ARM: KVM: arch_timers: zero CNTVOFF upon return to host   Christoffer Dall
• [PATCH] arm: kvm: arch_timer: use symbolic constants   Christoffer Dall
• [PATCH 2/5] ARM: KVM: arch_timers: zero CNTVOFF upon return to host   Christoffer Dall
• [PATCH 4/7] ARM: KVM: enforce page alignment for identity mapped code   Christoffer Dall
• Problem building 3.9rc5 - with CONFIG_AUTO_ZRELADDR   Christoffer Dall
• [PATCH v2 0/7] ARM: KVM: Revamping the HYP init code for fun and profit   Christoffer Dall
• [PATCH v2 6/7] ARM: KVM: switch to a dual-step HYP init code   Christoffer Dall
• [PATCH 0/2] ARM: KVM: pre-KVM/arm64 patches   Christoffer Dall
• [PATCH] KVM: ARM: Fix wrong address in comment   Christoffer Dall
• [PATCH] ARM: KVM: fix L_PTE_S2_RDWR to actually be Read/Write   Christoffer Dall
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Christoffer Dall
• [PATCH] ARM: KVM: fix unbalanced get_cpu() in access_dcsw   Christoffer Dall
• [PATCH v3 5/7] ARM: KVM: rework HYP page table freeing   Christoffer Dall
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Christoffer Dall
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Christoffer Dall
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Christoffer Dall
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Christoffer Dall
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Christoffer Dall
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Christoffer Dall
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Christoffer Dall
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Christoffer Dall
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Christoffer Dall
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Christoffer Dall
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Christoffer Dall
• [PATCH v4 3/7] ARM: KVM: move to a KVM provided HYP idmap   Christoffer Dall
• [PATCH v3 5/7] ARM: KVM: rework HYP page table freeing   Christoffer Dall
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Christoffer Dall
• [PATCH v3 6/7] ARM: KVM: switch to a dual-step HYP init code   Christoffer Dall
• KVM/ARM in next   Christoffer Dall
• [PATCH] KVM: ARM: Fix API documentation for ONE_REG encoding   Christoffer Dall
• [PATCH] ARM: mm: Get rid of L_PTE_USER ref from PAGE_S2_DEVICE   Christoffer Dall
• [PATCH] ARM: mm: Get rid of L_PTE_USER ref from PAGE_S2_DEVICE   Christoffer Dall
• [PATCH 04/21] ARM: kvm: define KVM_ARM_MAX_VCPUS unconditionally   Christoffer Dall
• [PATCH 04/21] ARM: kvm: define KVM_ARM_MAX_VCPUS unconditionally   Christoffer Dall
• [PATCH v3 03/32] arm64: KVM: HYP mode idmap support   Christoffer Dall
• [PATCH v3 07/32] arm64: KVM: fault injection into a guest   Christoffer Dall
• [PATCH v3 08/32] arm64: KVM: architecture specific MMU backend   Christoffer Dall
• [PATCH v3 11/32] arm64: KVM: CPU specific system registers handling   Christoffer Dall
• [PATCH v3 15/32] arm64: KVM: guest one-reg interface   Christoffer Dall
• [PATCH v3 17/32] arm64: KVM: HYP mode world switch implementation   Christoffer Dall
• [PATCH v3 19/32] arm64: KVM: Plug the VGIC   Christoffer Dall
• [PATCH v3 20/32] arm64: KVM: Plug the arch timer   Christoffer Dall
• [PATCH v3 24/32] arm64: KVM: 32bit GP register access   Christoffer Dall
• [PATCH v3 25/32] arm64: KVM: 32bit conditional execution emulation   Christoffer Dall
• [PATCH v3 10/32] arm64: KVM: system register handling   Christoffer Dall
• [PATCH v3 26/32] arm64: KVM: 32bit handling of coprocessor traps   Christoffer Dall
• [PATCH v3 29/32] arm64: KVM: 32bit guest fault injection   Christoffer Dall
• [PATCH v3 30/32] arm64: KVM: enable initialization of a 32bit vcpu   Christoffer Dall
• [PATCH v3 31/32] arm64: KVM: userspace API documentation   Christoffer Dall
• [PATCH v3 00/32] Port of KVM to arm64   Christoffer Dall
• [kvmarm] [PATCH 09/29] arm64: KVM: system register handling   Christoffer Dall
• [PATCH v3 07/32] arm64: KVM: fault injection into a guest   Christoffer Dall
• [PATCH v3 08/32] arm64: KVM: architecture specific MMU backend   Christoffer Dall
• [PATCH v3 08/32] arm64: KVM: architecture specific MMU backend   Christoffer Dall
• [PATCH v3 15/32] arm64: KVM: guest one-reg interface   Christoffer Dall
• [PATCH v3 17/32] arm64: KVM: HYP mode world switch implementation   Christoffer Dall
• [PATCH v3 24/32] arm64: KVM: 32bit GP register access   Christoffer Dall
• [PATCH v3 25/32] arm64: KVM: 32bit conditional execution emulation   Christoffer Dall
• [PATCH v3 26/32] arm64: KVM: 32bit handling of coprocessor traps   Christoffer Dall
• [PATCH v3 29/32] arm64: KVM: 32bit guest fault injection   Christoffer Dall
• [PATCH v3 30/32] arm64: KVM: enable initialization of a 32bit vcpu   Christoffer Dall
• [PATCH v3 08/32] arm64: KVM: architecture specific MMU backend   Christoffer Dall
• [PATCH] ARM: KVM: Allow host virtual timer irq number to be different from guest virtual timer irq number   Christoffer Dall
• [PATCH] ARM: KVM: Allow host virtual timer irq number to be different from guest virtual timer irq number   Christoffer Dall
• [PATCH V3] ARM: KVM: Allow host virtual timer irq number to be different from guest virtual timer irq number   Christoffer Dall
• [PATCH V3] ARM: KVM: Allow host virtual timer irq number to be different from guest virtual timer irq number   Christoffer Dall
• [PATCH v4 5/7] ARM: KVM: rework HYP page table freeing   Christoffer Dall
• [PATCH] arm64: KVM: Reset arch_timer upon vcpu reset   Christoffer Dall
• [GIT PULL] KVM/ARM Changes for 3.10   Christoffer Dall
• [PATCH V2] ARM: KVM: Allow host virt timer irq to be different from guest timer virt irq   Christoffer Dall
• [PATCH V2] arm64: KVM: Reset arch_timer upon vcpu reset   Christoffer Dall
• [GIT PULL] KVM/ARM Changes for 3.10   Christoffer Dall
• [GIT PULL v2] KVM/ARM Changes for 3.10   Christoffer Dall
• [PATCH 01/15] ARM: KVM: add support for minimal host vs guest profiling   Christoffer Dall
• [PATCH 02/15] ARM: KVM: arch_timer: use symbolic constants   Christoffer Dall
• [PATCH 03/15] ARM: KVM: simplify HYP mapping population   Christoffer Dall
• [PATCH 04/15] ARM: KVM: fix HYP mapping limitations around zero   Christoffer Dall
• [PATCH 05/15] ARM: KVM: move to a KVM provided HYP idmap   Christoffer Dall
• [PATCH 06/15] ARM: KVM: enforce maximum size for identity mapped code   Christoffer Dall
• [PATCH 07/15] ARM: KVM: rework HYP page table freeing   Christoffer Dall
• [PATCH 08/15] ARM: KVM: switch to a dual-step HYP init code   Christoffer Dall
• [PATCH 09/15] ARM: KVM: perform HYP initilization for hotplugged CPUs   Christoffer Dall
• [PATCH 10/15] ARM: KVM: add architecture specific hook for capabilities   Christoffer Dall
• [PATCH 11/15] ARM: KVM: promote vfp_host pointer to generic host cpu context   Christoffer Dall
• [PATCH 12/15] KVM: ARM: Fix API documentation for ONE_REG encoding   Christoffer Dall
• [PATCH 13/15] ARM: KVM: define KVM_ARM_MAX_VCPUS unconditionally   Christoffer Dall
• [PATCH 14/15] KVM: ARM: Fix spelling in error message   Christoffer Dall
• [PATCH 15/15] ARM: KVM: iterate over all CPUs for CPU compatibility check   Christoffer Dall
• [PATCH 1/4] ARM: KVM: be more thorough when invalidating TLBs   Christoffer Dall
• [PATCH 4/4] ARM: KVM: fix use of S2_PGD_SIZE   Christoffer Dall
• [PATCH V3] ARM: KVM: Allow host virt timer irq to be different from guest timer virt irq   Christoffer Dall
• [PATCH 4/4] ARM: KVM: fix use of S2_PGD_SIZE   Christoffer Dall
• [GIT PULL v2] Renesas ARM-based SoC board updates for v3.10   Magnus Damm
• [PATCH 00/04] ARM: shmobile: pinmux platform device cleanups   Magnus Damm
• [PATCH 01/04] ARM: shmobile: r8a7740 pinmux platform device cleanup   Magnus Damm
• [PATCH 02/04] ARM: shmobile: r8a7779 pinmux platform device cleanup   Magnus Damm
• [PATCH 03/04] ARM: shmobile: sh7372 pinmux platform device cleanup   Magnus Damm
• [PATCH 04/04] ARM: shmobile: sh73a0 pinmux platform device cleanup   Magnus Damm
• [PATCH 0/5 v3] ARM: shmobile: Add SMSC support on Bock-W   Magnus Damm
• [PATCH] irqchip: irqc: Add runtime PM support   Magnus Damm
• [PATCH v2] irqchip: renesas-intc-irqpin: DT binding for sense bitfield width   Magnus Damm
• [PATCH 00/02] ARM: shmobile: r8a7790 Lager arch timer fixes   Magnus Damm
• [PATCH 01/02] ARM: shmobile: force enable of r8a7790 arch timer   Magnus Damm
• [PATCH 02/02] ARM: shmobile: use r8a7790 timer setup code on Lager   Magnus Damm
• [PATCH] ARM: shmobile: Include all 2 GiB of memory on APE6EVM   Magnus Damm
• [PATCH v3] irqchip: renesas-intc-irqpin: DT binding for sense bitfield width   Magnus Damm
• [PATCH] ARM: shmobile: Include all 2 GiB of memory on APE6EVM   Magnus Damm
• [PATCH] ARM: shmobile: Include all 2 GiB of memory on APE6EVM   Magnus Damm
• [PATCH] Report double word access atomicity on LPAE enabled targets through AUXV   Vladimir Danushevsky
• [PATCH] Report double word access atomicity on LPAE enabled targets through AUXV   Vladimir Danushevsky
• [PATCH] Report double word access atomicity on LPAE enabled targets through AUXV   Vladimir Danushevsky
• [PATCH] Report double word access atomicity on LPAE enabled targets through AUXV   Vladimir Danushevsky
• [PATCH V2 1/2] ARM: bcm281xx: Add L2 cache enable code   Christian Daudt
• [PATCH V2 2/2] ARM: bcm281xx: Add DT support for SMC handler   Christian Daudt
• [GIT PULL] ARM: bcm281xx firmware tags   Christian Daudt
• [PATCH] ARM: bcm: mark bcm_kona_smc_init as __init   Christian Daudt
• [PATCH] clocksource: kona: adapt to CLOCKSOURCE_OF_DECLARE change   Christian Daudt
• [PATCH] ARM: bcm281xx: Add L2 support for Rev A2 chips   Christian Daudt
• [PATCH 1/2] Allow constructor name selection by architecture.   George G. Davis
• [PATCH 1/2] Allow constructor name selection by architecture.   George G. Davis
• [PATCH v4 1/2] arm: introduce psci_smp_ops   Will Deacon
• [PATCH] ARM: imx: do not bring up unavailable cores   Will Deacon
• [PATCH v5 1/3] arm: introduce psci_smp_ops   Will Deacon
• [PATCH] ARM: Fix typo "CONFIG_LPAE" twice   Will Deacon
• [PATCH 3/7] ARM: KVM: move to a KVM provided HYP idmap   Will Deacon
• [PATCH 4/7] ARM: KVM: enforce page alignment for identity mapped code   Will Deacon
• [PATCH 6/7] ARM: KVM: switch to a dual-step HYP init code   Will Deacon
• [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig   Will Deacon
• [PATCH] arm64: Fix task tracing   Will Deacon
• [PATCH] documentation: iommu: add description of ARM System MMU binding   Will Deacon
• [PATCH] documentation: iommu: add description of ARM System MMU binding   Will Deacon
• [PATCH] documentation: iommu: add description of ARM System MMU binding   Will Deacon
• [PATCH] documentation: iommu: add description of ARM System MMU binding   Will Deacon
• [PATCH 2/2] mm: vmemmap: arm64: add vmemmap_verify check for hot-add node case   Will Deacon
• [PATCH] Report double word access atomicity on LPAE enabled targets through AUXV   Will Deacon
• [PATCH] arm64: Fix task tracing   Will Deacon
• [PATCH] Report double word access atomicity on LPAE enabled targets through AUXV   Will Deacon
• [PATCH v2 6/7] ARM: KVM: switch to a dual-step HYP init code   Will Deacon
• [PATCH] ARM: hw_breakpoint: Do not use __cpuinitdata for dbg_cpu_pm_nb   Will Deacon
• [PATCH v2] arm64: Fix task tracing   Will Deacon
• [PATCH] ARM: hw_breakpoint: Do not use __cpuinitdata for dbg_cpu_pm_nb   Will Deacon
• Removal of NWFPE in its entirety, and VFP emulation code   Will Deacon
• [PATCH v3 02/32] arm64: KVM: define HYP and Stage-2 translation page flags   Will Deacon
• [PATCH v3 07/32] arm64: KVM: fault injection into a guest   Will Deacon
• [PATCH v3 09/32] arm64: KVM: user space interface   Will Deacon
• [PATCH v3 10/32] arm64: KVM: system register handling   Will Deacon
• [PATCH v3 11/32] arm64: KVM: CPU specific system registers handling   Will Deacon
• [PATCH v3 12/32] arm64: KVM: virtual CPU reset   Will Deacon
• [PATCH v3 15/32] arm64: KVM: guest one-reg interface   Will Deacon
• [PATCH] documentation: iommu: add description of ARM System MMU binding   Will Deacon
• [PATCH 0/4 v6] arm: introduce psci_smp_ops and use them on Xen   Will Deacon
• Kexec couldn't reboot capture kernel on pandaboard ES with OMAP4460   Will Deacon
• [PATCH] arm64: remove PSR bit macros from uapi   Will Deacon
• [PATCH v2] documentation: iommu: add description of ARM System MMU binding   Will Deacon
• [PATCH] ARM: KVM: fix unbalanced get_cpu() in access_dcsw   Will Deacon
• [PATCH v2] arm64: Fix task tracing   Will Deacon
• [PATCH] documentation: iommu: add description of ARM System MMU binding   Will Deacon
• [PATCH v2] arm64: Fix task tracing   Will Deacon
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Will Deacon
• [RFC PATCH 1/3] pstore-ram: use write-combine mappings   Will Deacon
• [PATCH 1/2] ARM: add diagnostic register access helpers   Will Deacon
• [PATCH] Report double word access atomicity on LPAE enabled targets through AUXV   Will Deacon
• [PATCH] Report double word access atomicity on LPAE enabled targets through AUXV   Will Deacon
• [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig   Will Deacon
• [PATCH v4 3/7] ARM: KVM: move to a KVM provided HYP idmap   Will Deacon
• [PATCH] documentation: iommu: add description of ARM System MMU binding   Will Deacon
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Will Deacon
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Will Deacon
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Will Deacon
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Will Deacon
• arm: ARM_VIRT_EXT is not supported by all v7 platforms, so it should not be enabled by default   Will Deacon
• [PATCH 3/4] ARM: sched_clock: Add support for >32 bit sched_clock   Will Deacon
• [PATCHv2] arm: Preserve TPIDRURW on context switch   Will Deacon
• [RFC PATCH v2 00/13] ARM: DT cpu bindings updates   Will Deacon
• [RFC PATCH v2 00/13] ARM: DT cpu bindings updates   Will Deacon
• [PATCHv2] arm: Preserve TPIDRURW on context switch   Will Deacon
• [PATCHv2] arm: Preserve TPIDRURW on context switch   Will Deacon
• [PATCH] documentation: iommu: add description of ARM System MMU binding   Will Deacon
• [PATCH v2] arm64: compiling issue, need add include/asm/vga.h file   Will Deacon
• [PATCH v3 08/32] arm64: KVM: architecture specific MMU backend   Will Deacon
• [PATCH v8 1/2] arm: introduce psci_smp_ops   Will Deacon
• [PATCH v8 2/2] ARM: Enable selection of SMP operations at boot time   Will Deacon
• [PATCH v4 7/7] mach-virt: support Xen hypercalls for shutdown and reboot   Will Deacon
• [PATCH v8 1/2] arm: introduce psci_smp_ops   Will Deacon
• [PATCH v8 1/2] arm: introduce psci_smp_ops   Will Deacon
• [PATCH v2] ARM: imx: replicate the diagnostic register of boot cpu into secondary cores   Will Deacon
• [PATCH 01/21] ARM: topology: export cpu_topology   Will Deacon
• [PATCH v3] ARM: imx: replicate the diagnostic register of boot cpu into secondary cores   Will Deacon
• [PATCH v8 1/2] arm: introduce psci_smp_ops   Will Deacon
• [PATCH v9 1/2] arm: introduce psci_smp_ops   Will Deacon
• [PATCH 3/4] ARM: KVM: relax cache maintainance when building page pables   Will Deacon
• [PATCH -next] [media] s5p-mfc: fix error return code in s5p_mfc_probe()   Kamil Debski
• [PATCH 1/3] Add support for GMT G72/G763 PWM fan controller   Jean Delvare
• [PATCHv1 1/3] hwmon: Add support for GMT G762/G763 PWM fan controller   Jean Delvare
• [RFC PATCH] at_hdmac: move to generic DMA binding   Ludovic Desroches
• [RFC v2 PATCH] at_hdmac: move to generic DMA binding   Ludovic Desroches
• [PATCH] mmc: atmel-mci: pio hang on block errors   Ludovic Desroches
• [PATCH 1/2] ARM: tegra: dalmore: populate key mapping   Laxman Dewangan
• [PATCH 2/2] ARM: tegra: pluto: populate key mapping   Laxman Dewangan
• [PATCH 1/2] ARM: config: tegra: enable T114 SPI   Laxman Dewangan
• [PATCH 2/2] ARM: tegra: dts: dalmore: enable spi4   Laxman Dewangan
• How to facilitate the cpuidle drivers to go to the same direction (Was: Re: [PATCH 4/9] ARM: OMAP4: cpuidle: fix wrong driver initialization)   Deepthi Dharwar
• [PATCH 9/9] POWERPC: pseries: cpuidle: use time keeping flag   Deepthi Dharwar
• [PATCH 14/21] staging: nvec: allow modular build   Marc Dietrich
• [PATCH 14/21] staging: nvec: allow modular build   Marc Dietrich
• [PATCH 14/21] staging: nvec: allow modular build   Marc Dietrich
• [PATCH V2 1/3] seccomp: add generic code for jitted seccomp filters.   Will Drewry
• [PATCH] net: mv643xx_eth: Add GRO support   Eric Dumazet
• [PATCH] net: mv643xx_eth: Add GRO support   Eric Dumazet
• [PATCH] net: mv643xx_eth: Add GRO support   Eric Dumazet
• [PATCH] net: mv643xx_eth: Add GRO support   Eric Dumazet
• [PATCH] net: mv643xx_eth: Add GRO support   Eric Dumazet
• [PATCH] net: mv643xx_eth: remove deprecated inet_lro support   Eric Dumazet
• [PATCH v2] net: mv643xx_eth: remove deprecated inet_lro support   Eric Dumazet
• [PATCH] mm: add an option to disable bounce   Randy Dunlap
• [PATCH] clk: add option to keep boot clocks on   Randy Dunlap
• gpio-pxa initcall level change and machine init breakage   Mike Dunn
• gpio-pxa initcall level change and machine init breakage   Mike Dunn
• gpio-pxa initcall level change and machine init breakage   Mike Dunn
• gpio-pxa initcall level change and machine init breakage   Mike Dunn
• gpio-pxa initcall level change and machine init breakage   Mike Dunn
• [RFC,PATCHv0 0/3] Add support for GMT G762/G763 PWM fan controller   Arnaud Ebalard
• [PATCH 1/3] Add support for GMT G72/G763 PWM fan controller   Arnaud Ebalard
• [RFC,PATCHv0 2/3] Add DT documentation for G762 PWM fan controller   Arnaud Ebalard
• [PATCH 3/3] Add documentation for g762 driver   Arnaud Ebalard
• [PATCH 1/3] Add support for GMT G72/G763 PWM fan controller   Arnaud Ebalard
• [PATCH 1/3] Add support for GMT G72/G763 PWM fan controller   Arnaud Ebalard
• [PATCH 1/3] Add support for GMT G72/G763 PWM fan controller   Arnaud Ebalard
• [PATCHv1 0/3] hwmon: GMT G72/G763 PWM fan controller   Arnaud Ebalard
• [PATCHv1 1/3] hwmon: Add support for GMT G762/G763 PWM fan controller   Arnaud Ebalard
• [PATCHv1 2/3] hwmon: Add documentation for g762 driver   Arnaud Ebalard
• [PATCHv1 3/3] hwmon: Add DT documentation for g762 driver   Arnaud Ebalard
• [PATCHv1 3/3] hwmon: Add DT documentation for g762 driver   Arnaud Ebalard
• [PATCHv1 1/3] hwmon: Add support for GMT G762/G763 PWM fan controller   Arnaud Ebalard
• [PATCHv1 1/3] hwmon: Add support for GMT G762/G763 PWM fan controller   Arnaud Ebalard
• [PATCHv1 1/3] hwmon: Add support for GMT G762/G763 PWM fan controller   Arnaud Ebalard
• [PATCHv1 2/3] hwmon: Add documentation for g762 driver   Arnaud Ebalard
• [PATCHv1 1/3] hwmon: Add support for GMT G762/G763 PWM fan controller   Arnaud Ebalard
• [PATCH] ARM: hw_breakpoint: Do not use __cpuinitdata for dbg_cpu_pm_nb   Dietmar Eggemann
• [PATCH] ARM: hw_breakpoint: Do not use __cpuinitdata for dbg_cpu_pm_nb   Dietmar Eggemann
• [PATCH 1/8] video: atmel_lcdfb: fix platform data struct   Hans-Christian Egtvedt
• [PATCH 0/6] Add initial imx6dl support   Fabio Estevam
• [PATCH] ARM: imx: do not bring up unavailable cores   Fabio Estevam
• [PATCH] ARM: imx: do not bring up unavailable cores   Fabio Estevam
• [PATCH] ARM: dts: Add initial support for Wandboard Dual-Lite   Fabio Estevam
• [PATCH v2] ARM: dts: Add initial support for Wandboard Dual-Lite   Fabio Estevam
• [PATCH 1/3] ARM: dts: imx28-evk: Use the standard gpio reset binding   Fabio Estevam
• [PATCH 2/3] video: mxsfb: Remove custom method for retrieving GPIO   Fabio Estevam
• [PATCH 3/3] ARM: mxs_defconfig: Enable CONFIG_RESET_GPIO   Fabio Estevam
• [PATCH v2 1/3] ARM: dts: mxs: Use the standard gpio reset binding   Fabio Estevam
• [PATCH v2 2/3] video: mxsfb: Remove custom method for retrieving GPIO   Fabio Estevam
• [PATCH v2 3/3] ARM: mxs_defconfig: Enable CONFIG_RESET_GPIO   Fabio Estevam
• [PATCH 1/3] ARM: dts: imx28-evk: Use the standard gpio reset binding   Fabio Estevam
• [PATCH 1/3] ARM: dts: imx28-evk: Use the standard gpio reset binding   Fabio Estevam
• [PATCH v3 1/2] ARM: dts: mxs: Use 'regulator-fixed' for turning on LCD   Fabio Estevam
• [PATCH v3 2/2] video: mxsfb: Use devm_regulator_get()   Fabio Estevam
• [PATCH] ARM: dts: imx28-evk: Fix the ethernet regulator name   Fabio Estevam
• [RFC PATCH] CLK: Allow parent clock and rate to be configured in DT.   Fabio Estevam
• [PATCH] ARM: dts: imx28-evk: Fix the ethernet regulator name   Fabio Estevam
• [PATCH v4 1/2] ARM: dts: mxs: Use 'regulator-fixed' for turning on LCD   Fabio Estevam
• [PATCH v4 2/2] video: mxsfb: Use devm_regulator_get()   Fabio Estevam
• [PATCH v4 2/2] video: mxsfb: Use devm_regulator_get()   Fabio Estevam
• [PATCH v5] video: mxsfb: Introduce regulator support   Fabio Estevam
• [RFC PATCH] CLK: Allow parent clock and rate to be configured in DT.   Fabio Estevam
• [PATCH v2 0/3] Get rid of big array from imx pinctrl driver   Fabio Estevam
• [PATCH v2 0/3] Get rid of big array from imx pinctrl driver   Fabio Estevam
• [PATCH v2 0/3] Get rid of big array from imx pinctrl driver   Fabio Estevam
• [PATCH v2 0/3] Get rid of big array from imx pinctrl driver   Fabio Estevam
• [RFC PATCH] CLK: Allow parent clock and rate to be configured in DT.   Fabio Estevam
• [PATCH v6] video: mxsfb: Introduce regulator support   Fabio Estevam
• [PATCH v2 0/3] Get rid of big array from imx pinctrl driver   Fabio Estevam
• [PATCH v2 0/3] Get rid of big array from imx pinctrl driver   Fabio Estevam
• [PATCH] ARM: dts: imx6dl-wandboard: Add USB Host support   Fabio Estevam
• [PATCH 0/5] i.MX53 TVE clock patches   Fabio Estevam
• [PATCH 0/5] i.MX53 TVE clock patches   Fabio Estevam
• [PATCH] video: mxsfb: Adapt to new videomode API   Fabio Estevam
• [PATCH] video: mxsfb: Adapt to new videomode API   Fabio Estevam
• [PATCH] ARM: imx: Select IRAM_ALLOC   Fabio Estevam
• [PATCH] ARM: imx: Select IRAM_ALLOC   Fabio Estevam
• [PATCH v2] ARM: imx: Select GENERIC_ALLOCATOR   Fabio Estevam
• [PATCH 1/2] ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY   Fabio Estevam
• [PATCH] video: mxsfb: Adapt to new videomode API   Fabio Estevam
• [PATCH v2] video: mxsfb: Adapt to new videomode API   Fabio Estevam
• [PATCH 2/3] ARM:DTS:MVF600: add basic device tree source   Fabio Estevam
• [PATCH v2 1/1 net] enet: fec: fix fail resume from suspend state   Fabio Estevam
• [PATCH v3 1/1 net-next] net: fec: put tx to napi poll function to fix dead lock   Fabio Estevam
• [PATCH v2 1/1 net] enet: fec: fix fail resume from suspend state   Fabio Estevam
• [PATCH] tty/serial: add MVF uart driver support   Fabio Estevam
• [PATCH v2 3/4] ARM: dts: mx53qsb: Add support for parallel display   Fabio Estevam
• [PATCH] ARM: mach-imx6q: Remove code for setting up cko clock   Fabio Estevam
• [PATCH] ARM: mach-imx6q: Remove code for setting up cko clock   Fabio Estevam
• [PATCH V3] ARM: i.MX5: Allow DT clock providers   Fabio Estevam
• [PATCH] ARM: mx28: add dma channels for all auarts   Fabio Estevam
• [PATCH v1] ARM: do not select ARCH_VEXPRESS by default on ARCH_MULTI_V7   Fabio Estevam
• [RFC][PATCH] video: imx: Select VIDEOMODE_HELPERS   Fabio Estevam
• [PATCH V4] ARM: i.MX5: Allow DT clock providers   Fabio Estevam
• [RFC][PATCH] video: imx: Select VIDEOMODE_HELPERS   Fabio Estevam
• [PATCH 2/2] dma: imx-sdma: move to generic device tree bindings   Fabio Estevam
• [PATCH] media: coda: Fix compile breakage   Fabio Estevam
• at91: DT for MAC EEPROM?   Bryan Evenson
• [PATCH 2/4] ARM: kirkwood: add device node entries for the gigabit interfaces   Florian Fainelli
• [PATCH 0/5 v2] mv643xx_eth: device tree bindings   Florian Fainelli
• [PATCH 1/5 v2] mv643xx_eth: add Device Tree bindings   Florian Fainelli
• [PATCH 2/5] mv643xx_eth: update Device Tree bindings documentation   Florian Fainelli
• [PATCH 3/5 v2] ARM: kirkwood: add device node entries for the gigabit interfaces   Florian Fainelli
• [PATCH 4/5 v2] ARM: orion5x: add gigabit ethernet device tree node   Florian Fainelli
• [PATCH 5/5 v2] ARM: dove: add gigabit device tree nodes to dove.dtsi   Florian Fainelli
• [PATCH 3/5 v2] ARM: kirkwood: add device node entries for the gigabit interfaces   Florian Fainelli
• [PATCH 1/5 v2] mv643xx_eth: add Device Tree bindings   Florian Fainelli
• [PATCH 1/5 v2] mv643xx_eth: add Device Tree bindings   Florian Fainelli
• [PATCH 0/2] mm: vmemmap: add vmemmap_verify check for hot-add node/memory case   Lin Feng
• [PATCH 1/2] mm: vmemmap: x86: add vmemmap_verify check for hot-add node case   Lin Feng
• [PATCH 2/2] mm: vmemmap: arm64: add vmemmap_verify check for hot-add node case   Lin Feng
• [PATCH 1/2] mm: vmemmap: x86: add vmemmap_verify check for hot-add node case   Lin Feng
• [PATCH 0/2] mm: vmemmap: add vmemmap_verify check for hot-add node/memory case   Lin Feng
• [PATCH 0/2] mm: vmemmap: add vmemmap_verify check for hot-add node/memory case   Lin Feng
• [PATCH 2/2] mm: vmemmap: arm64: add vmemmap_verify check for hot-add node case   Lin Feng
• [RFC PATCH] rtc: rtc-at91rm9200: manage IMR depending on revision   Nicolas Ferre
• [RFC PATCH] rtc: rtc-at91rm9200: manage IMR depending on revision   Nicolas Ferre
• [RFC PATCH v2] rtc: rtc-at91rm9200: manage IMR depending on revision   Nicolas Ferre
• [GIT PULL] at91: soc for 3.10 #2   Nicolas Ferre
• [PATCH] ARM: at91/tc: fix clock source id for tc block > 1   Nicolas Ferre
• [GIT PULL] at91: DT changes for 3.10 #2   Nicolas Ferre
• [PATCH] ARM: at91/tc: fix clock source id for tc block > 1   Nicolas Ferre
• [PATCH] ARM: at91: remove unused dbgu_readl() macro   Nicolas Ferre
• [PATCH] Revert "drivers/rtc/rtc-at91rm9200.c: use a variable for storing IMR"   Nicolas Ferre
• [RFC PATCH v2] rtc: rtc-at91rm9200: manage IMR depending on revision   Nicolas Ferre
• [PATCH] rtc: rtc-at91sam9.c add DT support   Nicolas Ferre
• [GIT PULL] at91: DT changes for 3.10 #2   Nicolas Ferre
• [PATCH] rtc: rtc-at91sam9.c add DT support   Nicolas Ferre
• [PATCH v2] ARM: at91: add Acme Systems Aria G25 board   Nicolas Ferre
• [PATCH v3] ARM: at91: add Acme Systems Aria G25 board   Nicolas Ferre
• [PATCH] at91sam9260.dtsi: fix u(s)art pinctrl encoding   Nicolas Ferre
• [PATCH v2] ARM: at91/at91sam9260.dtsi: fix u(s)art pinctrl encoding   Nicolas Ferre
• [GIT PULL] at91: DT changes for 3.10 #3   Nicolas Ferre
• Regarding the SPI initialization problem on sam9x5 2000 boards in linux kernel 3.2.6   Nicolas Ferre
• [PATCH] Revert "drivers/rtc/rtc-at91rm9200.c: use a variable for storing IMR"   Nicolas Ferre
• [PATCH] Revert "drivers/rtc/rtc-at91rm9200.c: use a variable for storing IMR"   Nicolas Ferre
• [RFC 4/5] RTC: rtc-at91sam9: add device-tree support   Nicolas Ferre
• [RFC 4/5] RTC: rtc-at91sam9: add device-tree support   Nicolas Ferre
• [PATCH] ARM: at91: remove unused dbgu_readl() macro   Nicolas Ferre
• [PATCH 1/2] ARM: at91/setup: fix trivial typos   Nicolas Ferre
• [PATCH 2/2] ARM: at91: remove trailing semicolon from macros   Nicolas Ferre
• [GIT PULL] at91: DT changes for 3.10 #3   Nicolas Ferre
• [GIT PULL] at91: little cleanup for 3.10 #3   Nicolas Ferre
• [PATCH] mmc: atmel-mci: remove include <mach/cpu.h>   Nicolas Ferre
• [PATCH] ARM: at91: change "Unknown" qualifier SoC subtype handling   Nicolas Ferre
• [PATCH] watchdog: Revert the AT91RM9200_WATCHDOG dependency   Nicolas Ferre
• [PATCH 07/18] ARM: at91: cpuidle: use init/exit common routine   Nicolas Ferre
• [rtc-linux] Re: [PATCH v2 0/5] ARM: at91: fix hanged boot   Nicolas Ferre
• [PATCH] net/macb: fix error return code in macb_probe()   Nicolas Ferre
• [RFC patch 1/2] ARM: at91: cpuidle: encapsulate the standby code   Nicolas Ferre
• [RFC patch 2/2] ARM: at91: cpuidle: move the driver to drivers/cpuidle directory   Nicolas Ferre
• [PATCH 1/3] at_hdmac: move to generic DMA binding   Nicolas Ferre
• [PATCH 3/3] mci: at91: convert to dma_request_slave_channel_compat()   Nicolas Ferre
• [PATCH] dmaengine: at_hdmac: fix race condition in atc_advance_work()   Nicolas Ferre
• [PATCH 1/8] video: atmel_lcdfb: fix platform data struct   Nicolas Ferre
• [PATCH 2/8] video: atmel_lcdfb: introduce atmel_lcdfb_power_control   Nicolas Ferre
• [PATCH 3/8] video: atmel_lcdfb: pass the pdata as params   Nicolas Ferre
• [PATCH 4/8] video: atmel_lcdfb: add device tree suport   Nicolas Ferre
• [PATCH 5/8] ARM: at91: sam9g45: add lcd support   Nicolas Ferre
• [PATCH 5/8] ARM: at91: sam9g45: add lcd support   Nicolas Ferre
• [PATCH 6/8] ARM: at91: sam9263: add fb dt support   Nicolas Ferre
• [PATCH 8/8] ARM: at91: sam9263ek: add dt lcd support   Nicolas Ferre
• [PATCH 7/8] ARM: at91: at9sam9m10g45ek: add dt lcd support   Nicolas Ferre
• [PATCH 6/8] ARM: at91: sam9263: add fb dt support   Nicolas Ferre
• [PATCH 5/8] ARM: at91: sam9g45: add lcd support   Nicolas Ferre
• [PATCH 4/8] video: atmel_lcdfb: add device tree suport   Nicolas Ferre
• [PATCH v2 0/7] pcmcia: at91_cf: clean up and add DT support   Nicolas Ferre
• [RFC PATCH 2/2] ARM: DT: kernel: DT cpu node bindings update   Nicolas Ferre
• [PATCH for 3.9-final] dmaengine: at_hdmac: fix race condition in atc_advance_work()   Nicolas Ferre
• [PATCH 1/1] ARM: at91sam9260: dt: uart1 fix pinctrl typo   Nicolas Ferre
• [PATCH v3] ARM: at91: add Acme Systems Aria G25 board   Nicolas Ferre
• [PATCH v3] ARM: at91: add Acme Systems Aria G25 board   Nicolas Ferre
• [PATCH 1/6] at_hdmac: move to generic DMA binding   Nicolas Ferre
• [PATCH 0/5] ARM: at91: some more DT enhancements   Nicolas Ferre
• [PATCH 1/5] ARM: at91: at91sam9x5 RTC is not compatible with at91rm9200 one   Nicolas Ferre
• [PATCH 2/5] ARM: at91/at91-ariag25.dts: add RTC node   Nicolas Ferre
• [PATCH 3/5] ARM: at91/at91sam9x5.dtsi: add UART0/1 nodes   Nicolas Ferre
• [PATCH 4/5] ARM: at91/at91-ariag25.dts: UART0/1 nodes are disabled   Nicolas Ferre
• [PATCH 5/5] ARM: at91: add Acme Systems Fox G20 board   Nicolas Ferre
• [PATCH 18/19] ARM: at91: suspend both memory controllers on at91sam9263   Nicolas Ferre
• [PATCH 18/19] ARM: at91: suspend both memory controllers on at91sam9263   Nicolas Ferre
• [GIT PULL] at91: soc for 3.10 #3   Nicolas Ferre
• [PATCH 5/5] ARM: at91: add Acme Systems Fox G20 board   Nicolas Ferre
• [PATCH 5/5] ARM: at91: add Acme Systems Fox G20 board   Nicolas Ferre
• [PATCH] ARM: at91/sama5d34ek.dts: remove not needed compatibility string   Nicolas Ferre
• [PATCH] ARM: at91/sama5d34ek.dts: remove not needed compatibility string   Nicolas Ferre
• [PATCH v3 2/6] ARM: at91: dts: set #dma-cells to the correct value   Nicolas Ferre
• [PATCH v3 6/6] ARM: at91: dts: add MCI DMA support   Nicolas Ferre
• [PATCH v3 4/6] ARM: at91: dts: add i2c dma support   Nicolas Ferre
• [PATCH 5/5 v2] ARM: at91: add Acme Systems Fox G20 board   Nicolas Ferre
• [PATCH 1/5] ARM: at91: at91sam9x5 RTC is not compatible with at91rm9200 one   Nicolas Ferre
• [PATCH 1/5] ARM: at91: at91sam9x5 RTC is not compatible with at91rm9200 one   Nicolas Ferre
• [GIT PULL] at91: soc for 3.10 #4   Nicolas Ferre
• [GIT PULL] at91: DT changes for 3.11 #1 (or 3.10 #4)   Nicolas Ferre
• [PATCH v3 1/6] at_hdmac: move to generic DMA binding   Nicolas Ferre
• [RFC PATCH v2 03/13] ARM: mach-at91: cpus/cpu node dts updates   Nicolas Ferre
• [RFC PATCH v3 05/17] ARM: dts: at91: cpus/cpu node dts updates   Nicolas Ferre
• [PATCH v3 1/6] at_hdmac: move to generic DMA binding   Nicolas Ferre
• [PATCH v3 5/6] mci: at91: convert to dma_request_slave_channel_compat()   Nicolas Ferre
• linux-next build error (at91) - use of bool in mach/arch.h   Nicolas Ferre
• [PATCH] ARM: add the "bool" type definition to asm/mach/arch.h   Nicolas Ferre
• linux-next build error (at91) - use of bool in mach/arch.h   Nicolas Ferre
• [PATCH 0/6] pinctrl: Add support for pin control on S3C64xx   Tomasz Figa
• [PATCH v4 00/14] ARM: samsung-time: Prepare for multiplatform support   Tomasz Figa
• [PATCH v4 01/14] ARM: SAMSUNG: Move samsung-time to drivers/clocksource   Tomasz Figa
• [PATCH v4 02/14] clocksource: samsung-time: Drop useless defines from public header   Tomasz Figa
• [PATCH v4 03/14] clocksource: samsung-time: Use local register definitions   Tomasz Figa
• [PATCH v4 04/14] mfd: Add Samsung PWM/timer master driver   Tomasz Figa
• [PATCH v4 05/14] ARM: SAMSUNG: Unify base address definitions of timer block   Tomasz Figa
• [PATCH v4 06/14] ARM: SAMSUNG: Add new PWM platform device   Tomasz Figa
• [PATCH v4 07/14] ARM: SAMSUNG: Set PWM platform data   Tomasz Figa
• [PATCH v4 08/14] clocksource: samsung-time: Use Samsung PWM/timer master driver   Tomasz Figa
• [PATCH v4 09/14] clocksource: samsung-time: Use variant data to get SoC-specific bits   Tomasz Figa
• [PATCH v4 10/14] clocksource: samsung-time: Use master driver to configure dividers   Tomasz Figa
• [PATCH v4 11/14] clocksource: samsung-time: Use clk_prepare_enable   Tomasz Figa
• [PATCH v4 12/14] clocksource: samsung-time: Use master driver to control PWM channels   Tomasz Figa
• [PATCH v4 13/14] clocksource: samsung-time: Move IRQ mask/ack handling to the driver   Tomasz Figa
• [PATCH v4 14/14] ARM: SAMSUNG: Remove unused PWM timer IRQ chip code   Tomasz Figa
• [PATCH 0/3] ARM: EXYNOS: DT-enabled support for Universal C210   Tomasz Figa
• [PATCH 1/3] ARM: dts: exynos4: Add node for PWM device   Tomasz Figa
• [PATCH 2/3] ARM: EXYNOS: Add support for Exynos4210 EVT0 SoC   Tomasz Figa
• [PATCH 3/3] ARM: dts: exynos4210: Add basic dts file for universal_c210 board   Tomasz Figa
• [PATCH v4 00/14] ARM: samsung-time: Prepare for multiplatform support   Tomasz Figa
• [PATCH v4 04/14] mfd: Add Samsung PWM/timer master driver   Tomasz Figa
• [PATCH v4 04/14] mfd: Add Samsung PWM/timer master driver   Tomasz Figa
• [PATCH v4 04/14] mfd: Add Samsung PWM/timer master driver   Tomasz Figa
• [PATCH v4 00/14] ARM: samsung-time: Prepare for multiplatform support   Tomasz Figa
• [RFC PATCH] CLK: Allow parent clock and rate to be configured in DT.   Tomasz Figa
• [RFC PATCH] CLK: Allow parent clock and rate to be configured in DT.   Tomasz Figa
• [RFC PATCH] CLK: Allow parent clock and rate to be configured in DT.   Tomasz Figa
• [PATCH v4 04/14] mfd: Add Samsung PWM/timer master driver   Tomasz Figa
• [PATCH] ARM: dts: fix bad merge of display timing node to exynos5250-smdk5250.dts   Tomasz Figa
• [GIT PULL 08/10] secure-exynos for v3.10   Tomasz Figa
• [PATCH] pinctrl: Add pinctrl-s3c24xx driver   Tomasz Figa
• [PATCH] pinctrl: Add pinctrl-s3c24xx driver   Tomasz Figa
• [PATCH] pinctrl: Add pinctrl-s3c24xx driver   Tomasz Figa
• [PATCH] pinctrl: Add pinctrl-s3c24xx driver   Tomasz Figa
• [PATCH v2] pinctrl: Add pinctrl-s3c24xx driver   Tomasz Figa
• [PATCH v2] pinctrl: Add pinctrl-s3c24xx driver   Tomasz Figa
• [PATCH v3] pinctrl: Add pinctrl-s3c24xx driver   Tomasz Figa
• [PATCH v4 04/14] mfd: Add Samsung PWM/timer master driver   Tomasz Figa
• [PATCH 17/30] pwm: samsung: repair the worst MMIO abuses   Tomasz Figa
• [PATCH v5 00/14] ARM: samsung-time: Prepare for multiplatform support   Tomasz Figa
• [PATCH v5 01/14] ARM: SAMSUNG: Move samsung-time to drivers/clocksource   Tomasz Figa
• [PATCH v5 02/14] clocksource: samsung-pwm: Clean up platform header   Tomasz Figa
• [PATCH v5 03/14] clocksource: samsung-pwm: Add infrastructure to share PWM hardware   Tomasz Figa
• [PATCH v5 04/14] ARM: SAMSUNG: Unify base address definitions of timer block   Tomasz Figa
• [PATCH v5 05/14] ARM: SAMSUNG: Add new PWM platform device   Tomasz Figa
• [PATCH v5 06/14] ARM: SAMSUNG: Set PWM platform data   Tomasz Figa
• [PATCH v5 07/14] clocksource: samsung-pwm: Use platform data to setup the clocksource   Tomasz Figa
• [PATCH v5 08/14] clocksource: samsung-pwm: Synchronize register accesses   Tomasz Figa
• [PATCH v5 09/14] clocksource: samsung-pwm: Move IRQ mask/ack handling to the driver   Tomasz Figa
• [PATCH v5 10/14] ARM: SAMSUNG: Remove unused PWM timer IRQ chip code   Tomasz Figa
• [PATCH v5 11/14] clocksource: samsung-pwm: Configure dividers directly   Tomasz Figa
• [PATCH v5 12/14] clocksource: samsung-pwm: Do not use static mapping of registers   Tomasz Figa
• [PATCH v5 13/14] clocksource: samsung-pwm: Drop unnecessary includes   Tomasz Figa
• [PATCH v5 14/14] clocksource: samsung-pwm: Prepare for clocksource_of_init   Tomasz Figa
• [PATCH v5 03/14] clocksource: samsung-pwm: Add infrastructure to share PWM hardware   Tomasz Figa
• [PATCH v5 01/14] ARM: SAMSUNG: Move samsung-time to drivers/clocksource   Tomasz Figa
• [PATCH v5 00/14] ARM: samsung-time: Prepare for multiplatform support   Tomasz Figa
• [PATCH v5 00/14] ARM: samsung-time: Prepare for multiplatform support   Tomasz Figa
• [PATCH v2 0/3] ARM: EXYNOS: DT-enabled support for Universal C210   Tomasz Figa
• [PATCH v2 1/3] ARM: dts: exynos4: Add node for PWM device   Tomasz Figa
• [PATCH v2 2/3] ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC   Tomasz Figa
• [PATCH v2 3/3] ARM: dts: exynos4210: Add basic dts file for universal_c210 board   Tomasz Figa
• [PATCH v5 0/6] Initial Device Tree support for S3C64xx   Tomasz Figa
• [PATCH v5 1/6] ARM: common: vic: Parse interrupt and resume masks from device tree   Tomasz Figa
• [PATCH v5 2/6] ARM: s3c64xx: Skip legacy EINT setup if pinctrl-s3c64xx driver is present   Tomasz Figa
• [PATCH v5 3/6] gpio: samsung: Skip legacy GPIO registration if pinctrl-s3c64xx is present   Tomasz Figa
• [PATCH v5 4/6] ARM: s3c64xx: Add board file for boot using Device Tree   Tomasz Figa
• [PATCH v5 5/6] ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs   Tomasz Figa
• [PATCH v5 6/6] ARM: dts: Add dts file for S3C6410-based Mini6410 board   Tomasz Figa
• [PATCH v5 5/6] ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs   Tomasz Figa
• [PATCH 1/2] pinctrl: s3c64xx: Fix build error caused by undefined chained_irq_enter   Tomasz Figa
• [PATCH 2/2] pinctrl: samsung: Fix link error with CONFIG_PINCTRL_EXYNOS disabled   Tomasz Figa
• [PATCH RESEND 2/2] pinctrl: samsung: Fix link error with CONFIG_PINCTRL_EXYNOS disabled   Tomasz Figa
• [PATCH v5 2/6] ARM: s3c64xx: Skip legacy EINT setup if pinctrl-s3c64xx driver is present   Tomasz Figa
• [PATCH v5 3/6] gpio: samsung: Skip legacy GPIO registration if pinctrl-s3c64xx is present   Tomasz Figa
• [PATCH v6 2/6] ARM: s3c64xx: Skip legacy EINT setup if pinctrl-s3c64xx driver is present   Tomasz Figa
• [PATCH] MAINTAINERS: Add linux-samsung-soc list to all related entries   Tomasz Figa
• [PATCH v5 00/14] ARM: samsung-time: Prepare for multiplatform support   Tomasz Figa
• [PATCH 2/2] pinctrl: samsung: Fix link error with CONFIG_PINCTRL_EXYNOS disabled   Tomasz Figa
• [PATCH v2 2/3] ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC   Tomasz Figa
• [PATCH v5 5/6] ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs   Tomasz Figa
• [PATCH v3 00/13] ARM: EXYNOS: Fix Universal C210 support   Tomasz Figa
• [PATCH v3 01/13] Documentation: Add device tree bindings for Samsung PWM timers   Tomasz Figa
• [PATCH v3 02/13] clocksource: samsung_pwm_timer: Let platforms select the driver   Tomasz Figa
• [PATCH v3 03/13] clocksource: samsung_pwm_timer: Make PWM spinlock global   Tomasz Figa
• [PATCH v3 04/13] clocksource: samsung_pwm_timer: Keep all driver data in a structure   Tomasz Figa
• [PATCH v3 05/13] clocksource: samsung_pwm_timer: Drop unused samsung_pwm struct   Tomasz Figa
• [PATCH v3 06/13] clocksource: samsung_pwm_timer: Add support for non-DT platforms   Tomasz Figa
• [PATCH v3 07/13] clocksource: samsung_pwm_timer: Use proper clockevents max_delta   Tomasz Figa
• [PATCH v3 08/13] clocksource: samsung_pwm_timer: Correct programming of clock events   Tomasz Figa
• [PATCH v3 09/13] clocksource: samsung_pwm_timer: Work around rounding errors in clockevents core   Tomasz Figa
• [PATCH v3 10/13] ARM: SAMSUNG: Do not register legacy timer interrupts on Exynos   Tomasz Figa
• [PATCH v3 11/13] ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC   Tomasz Figa
• [PATCH v3 12/13] ARM: dts: exynos4: Add node for PWM device   Tomasz Figa
• [PATCH v3 13/13] ARM: dts: exynos4210: Add basic dts file for universal_c210 board   Tomasz Figa
• [PATCH 2/2] pinctrl: samsung: Fix link error with CONFIG_PINCTRL_EXYNOS disabled   Tomasz Figa
• [PATCH v3 00/13] ARM: EXYNOS: Fix Universal C210 support   Tomasz Figa
• [PATCH] ARM: dts: add pinctrl nodes for Exynos5250 SoC   Tomasz Figa
• [PATCH v3 11/13] ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC   Tomasz Figa
• [PATCH V2] video: implement a simple framebuffer driver   Tomasz Figa
• [PATCH V2] video: implement a simple framebuffer driver   Tomasz Figa
• [RFC][BUG] arm/dts: OMAP3: set #interrupt-cells to two   Christoph Fritz
• [RFC][BUG] arm/dts: OMAP3: set #interrupt-cells to two   Christoph Fritz
• [RFC][BUG] arm/dts: OMAP3: set #interrupt-cells to two   Christoph Fritz
• [RFC][BUG] arm/dts: OMAP3: set #interrupt-cells to two   Christoph Fritz
• [PATCH] ARM: OMAP2+: nand: reorganize gpmc timing values   Christoph Fritz
• [PATCH] ARM: footbridge: fix overlapping PCI mappings   Mike Frysinger
• [RFC PATCH] CLK: Allow parent clock and rate to be configured in DT.   Martin Fuzzey
• [RFC PATCH] CLK: Allow parent clock and rate to be configured in DT.   Martin Fuzzey
• [PATCH] ARM: i.MX5 Allow DT clock providers   Martin Fuzzey
• [PATCH] SPI: spidev: Add DT compatible string for spidev driver.   Martin Fuzzey
• [PATCH] SPI: spidev: Add DT compatible string for spidev driver.   Martin Fuzzey
• [PATCH V2] ARM: i.MX5: Allow DT clock providers   Martin Fuzzey
• [PATCH V2] ARM: i.MX5: Allow DT clock providers   Martin Fuzzey
• [PATCH V3] ARM: i.MX5: Allow DT clock providers   Martin Fuzzey
• [PATCH V4] ARM: i.MX5: Allow DT clock providers   Martin Fuzzey
• [PATCH v8 1/8] spi/spi-atmel: add physical base address   Richard GENOUD
• [PATCH v8 2/8] spi/spi-atmel: add flag to controller data for lock operations   Richard GENOUD
• [PATCH v8 3/8] spi/spi-atmel: add dmaengine support   Richard GENOUD
• [PATCH v8 8/8] ARM: dts: add pinctrl property for spi node for atmel SoC   Richard GENOUD
• [PATCH RFC] ARM: don't allow to register the early_console twice   Richard GENOUD
• [PATCH v8 10/14] ARM: tegra: Define Tegra114 CAR binding   Prashant Gaikwad
• [PATCH] clk: tegra: Fix cdev1 and cdev2 IDs   Prashant Gaikwad
• [PATCH] clk: tegra: Add missing cdev1 and cdev2 clocks   Prashant Gaikwad
• [PATCH] clk: tegra: Use common of_clk_init() function   Prashant Gaikwad
• [PATCH 1/3] clk: composite: rename 'div' references to 'rate'   Prashant Gaikwad
• [PATCH 2/3] clk: composite: allow fixed rates & fixed dividers   Prashant Gaikwad
• [PATCH] ARM:OMAP2: an issue about curr_pwrst, u8 is never < 0   Chen Gang
• [Suggestion] ARM64:kernel: compiling issue for early_console.   Chen Gang
• [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig   Chen Gang
• [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig   Chen Gang
• [Suggestion] ARM64:kernel: compiling issue for early_console.   Chen Gang
• [Suggestion] ARM64:kernel: compiling issue for early_console.   Chen Gang
• [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig   Chen Gang
• [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig   Chen Gang
• [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig   Chen Gang
• [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig   Chen Gang
• [PATCH] ARM64: kernel: compiling issue, duplicate definition of early_console   Chen Gang
• [PATCH] ARM64: kernel: compiling issue: need define readq and writeq for driver module using.   Chen Gang
• [Suggestion] ARM64: kernel: compiling issue, need implement cmpxchg64 with assembler language.   Chen Gang
• [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig   Chen Gang
• [PATCH] ARM64: kernel: compiling issue: need define readq and writeq for driver module using.   Chen Gang
• [PATCH] ARM64: kernel: compiling issue, duplicate definition of early_console   Chen Gang
• [PATCH] ARM64: kernel: compiling issue, duplicate definition of early_console   Chen Gang
• [Suggestion] ARM64: kernel: compiling issue, need implement cmpxchg64 with assembler language.   Chen Gang
• [Suggestion] ARM64: kernel: compiling issue, need implement cmpxchg64 with assembler language.   Chen Gang
• [PATCH] ARM64: kernel: compiling issue, define cmpxchg64 and cmpxchg64_local for outside using.   Chen Gang
• [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig   Chen Gang
• [PATCH] ARM64: kernel: compiling issue, define cmpxchg64 and cmpxchg64_local for outside using.   Chen Gang
• [PATCH] arm64: compiling issue, need add include/asm/vga.h file   Chen Gang
• [PATCH] ARM: Kconfig: let ARM9TDMI and ARM7TDMI invisible.   Chen Gang
• [PATCH] ARM: Kconfig: let ARM9TDMI and ARM7TDMI invisible.   Chen Gang
• [PATCH v2] ARM: Kconfig: let ARM9TDMI and ARM7TDMI invisible.   Chen Gang
• [PATCH] arm64: compiling issue, need add include/asm/vga.h file   Chen Gang
• [PATCH v2] arm64: compiling issue, need add include/asm/vga.h file   Chen Gang
• [PATCH v2] arm64: compiling issue, need add include/asm/vga.h file   Chen Gang
• [PATCH v2] arm64: compiling issue, need add include/asm/vga.h file   Chen Gang
• [PATCH v3] arm64: compiling issue, need add include/asm/vga.h file   Chen Gang
• [PATCH v3] arm64: compiling issue, need add include/asm/vga.h file   Chen Gang
• [PATCH v2] ARM: Kconfig: let ARM9TDMI and ARM7TDMI invisible.   Chen Gang
• [PATCH v2] ARM: Kconfig: let ARM9TDMI and ARM7TDMI invisible.   Chen Gang
• [PATCH v2 1/4] thermal: Add driver for Armada 370/XP SoC thermal management   Ezequiel Garcia
• [PATCH v2 1/4] thermal: Add driver for Armada 370/XP SoC thermal management   Ezequiel Garcia
• [RFCv1 00/11] MSI support for Marvell EBU PCIe driver   Ezequiel Garcia
• [PATCH v3 0/9] refactoring for mask_cache   Ezequiel Garcia
• [PATCH v2 0/5] Device Bus support for Marvell EBU SoC   Ezequiel Garcia
• [PATCH v2 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Ezequiel Garcia
• [PATCH v2 2/5] ARM: mvebu: Add Device Bus support for Armada 370/XP SoC   Ezequiel Garcia
• [PATCH v2 3/5] ARM: mvebu: Add support for NOR flash device on Armada XP-GP board   Ezequiel Garcia
• [PATCH v2 4/5] ARM: mvebu: Add support for NOR flash device on Openblocks AX3 board   Ezequiel Garcia
• [PATCH v2 5/5] ARM: mvebu: Add Device Bus and CFI flash memory support to defconfig   Ezequiel Garcia
• mvebu: Device bus driver resurrection   Ezequiel Garcia
• [PATCH v2 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Ezequiel Garcia
• [PATCH v3 0/5] Device Bus support for Marvell EBU SoC   Ezequiel Garcia
• [PATCH v3 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Ezequiel Garcia
• [PATCH v3 2/5] ARM: mvebu: Add Device Bus support for Armada 370/XP SoC   Ezequiel Garcia
• [PATCH v3 3/5] ARM: mvebu: Add support for NOR flash device on Armada XP-GP board   Ezequiel Garcia
• [PATCH v3 4/5] ARM: mvebu: Add support for NOR flash device on Openblocks AX3 board   Ezequiel Garcia
• [PATCH v3 5/5] ARM: mvebu: Add Device Bus and CFI flash memory support to defconfig   Ezequiel Garcia
• [PATCH v3 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Ezequiel Garcia
• [PATCH v2 1/4] thermal: Add driver for Armada 370/XP SoC thermal management   Ezequiel Garcia
• [PATCH v4 0/5] Device Bus support for Marvell EBU SoC   Ezequiel Garcia
• [PATCH v4 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Ezequiel Garcia
• [PATCH v4 2/5] ARM: mvebu: Add Device Bus support for Armada 370/XP SoC   Ezequiel Garcia
• [PATCH v4 3/5] ARM: mvebu: Add support for NOR flash device on Armada XP-GP board   Ezequiel Garcia
• [PATCH v4 4/5] ARM: mvebu: Add support for NOR flash device on Openblocks AX3 board   Ezequiel Garcia
• [PATCH v4 5/5] ARM: mvebu: Add Device Bus and CFI flash memory support to defconfig   Ezequiel Garcia
• [PATCH v4 0/5] Device Bus support for Marvell EBU SoC   Ezequiel Garcia
• [PATCH v4 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Ezequiel Garcia
• [PATCH v4 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Ezequiel Garcia
• [PATCH v4 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Ezequiel Garcia
• [PATCH v5 0/5] Device Bus support for Marvell EBU SoC   Ezequiel Garcia
• [PATCH v5 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Ezequiel Garcia
• [PATCH v5 2/5] ARM: mvebu: Add Device Bus support for Armada 370/XP SoC   Ezequiel Garcia
• [PATCH v5 3/5] ARM: mvebu: Add support for NOR flash device on Armada XP-GP board   Ezequiel Garcia
• [PATCH v5 4/5] ARM: mvebu: Add support for NOR flash device on Openblocks AX3 board   Ezequiel Garcia
• [PATCH v5 5/5] ARM: mvebu: Add Device Bus and CFI flash memory support to defconfig   Ezequiel Garcia
• [PATCH v6 0/5] Device Bus support for Marvell EBU SoC   Ezequiel Garcia
• [PATCH v6 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Ezequiel Garcia
• [PATCH v6 2/5] ARM: mvebu: Add Device Bus support for Armada 370/XP SoC   Ezequiel Garcia
• [PATCH v6 3/5] ARM: mvebu: Add support for NOR flash device on Armada XP-GP board   Ezequiel Garcia
• [PATCH v6 4/5] ARM: mvebu: Add support for NOR flash device on Openblocks AX3 board   Ezequiel Garcia
• [PATCH v6 5/5] ARM: mvebu: Add Device Bus and CFI flash memory support to defconfig   Ezequiel Garcia
• [PATCH v4 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Ezequiel Garcia
• [PATCH v6 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Ezequiel Garcia
• [PATCH v6 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Ezequiel Garcia
• [PATCHv1 0/5] Marvell EBU irqchip improvements   Ezequiel Garcia
• [PATCH v6 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Ezequiel Garcia
• [PATCHv1 0/5] Marvell EBU irqchip improvements   Ezequiel Garcia
• [PATCH v7 0/5] Device Bus support for Marvell EBU SoC   Ezequiel Garcia
• [PATCH v7 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Ezequiel Garcia
• [PATCH v7 2/5] ARM: mvebu: Add Device Bus support for Armada 370/XP SoC   Ezequiel Garcia
• [PATCH v7 3/5] ARM: mvebu: Add support for NOR flash device on Armada XP-GP board   Ezequiel Garcia
• [PATCH v7 4/5] ARM: mvebu: Add support for NOR flash device on Openblocks AX3 board   Ezequiel Garcia
• [PATCH v7 5/5] ARM: mvebu: Add Device Bus and CFI flash memory support to defconfig   Ezequiel Garcia
• [v2,01/14] thermal: Rename driver 'kirkwood' -> 'mvebu'   Ezequiel Garcia
• [v2,01/14] thermal: Rename driver 'kirkwood' -> 'mvebu'   Ezequiel Garcia
• [PATCH] ARM: mvebu: Add support for USB storage class in mvebu_defconfig   Ezequiel Garcia
• AT91SAM9M10: Problem porting driver for MT9P031 sensor   Ezequiel Garcia
• [PATCH v7 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Ezequiel Garcia
• [PATCH v7 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Ezequiel Garcia
• [PATCH] drivers: memory: Introduce Marvell EBU Device Bus driver   Ezequiel Garcia
• [PATCH] drivers: memory: Introduce Marvell EBU Device Bus driver   Ezequiel Garcia
• [PATCH 4/6] ata: i.MX PATA: add devicetree support   Jeff Garzik
• [PATCH v8 3/8] spi/spi-atmel: add dmaengine support   Richard Genoud
• linux-next: manual merge of the arm-soc tree with the spi-mb tree   Richard Genoud
• [PATCH V2 2/3] ARM: net: bpf_jit: make code generation less dependent on struct sk_filter.   Mircea Gherzan
• [PATCH V2 3/3] ARM: net: bpf_jit: add support for jitted seccomp filters.   Mircea Gherzan
• How to represent negative values for device tree property   David Gibson
• How to represent negative values for device tree property   David Gibson
• [RFC PATCH] rtc: rtc-at91rm9200: manage IMR depending on revision   Douglas Gilbert
• [PATCH v2] ARM: at91: add Acme Systems Aria G25 board   Douglas Gilbert
• [PATCH] rtc: rtc-at91sam9.c add DT support   Douglas Gilbert
• [PATCH] at91sam9260.dtsi: fix u(s)art pinctrl encoding   Douglas Gilbert
• [PATCH] rtc: rtc-at91sam9.c add DT support   Douglas Gilbert
• [PATCH v3] ARM: at91: add Acme Systems Aria G25 board   Douglas Gilbert
• [PATCH] rtc: rtc-at91sam9.c add DT support   Douglas Gilbert
• [PATCH v3] irqchip: Add support for ARMv7-M's NVIC   Thomas Gleixner
• [PATCH v3] irqchip: Add support for ARMv7-M's NVIC   Thomas Gleixner
• [PATCH v3] irqchip: Add support for ARMv7-M's NVIC   Thomas Gleixner
• RFC: [PATCH] clocksource: tcb: fix min_delta calculation   Thomas Gleixner
• RFC: [PATCH] clocksource: tcb: fix min_delta calculation   Thomas Gleixner
• [PATCH v2] ARM: imx27: Add PWM0 to device tree   Gwenhael Goavec-Merou
• [PATCH v3] mm: Make snapshotting pages for stable writes a per-bio operation   Mel Gorman
• [PATCH 10/21] [SCSI] nsp32: use mdelay instead of large udelay constants   Masanori Goto
• [PATCH 10/21] [SCSI] nsp32: use mdelay instead of large udelay constants   Masanori Goto
• arm: ARM_VIRT_EXT is not supported by all v7 platforms, so it should not be enabled by default   Sebastian Gottschall
• [PATCH 3/3] ARM: EXYNOS5250: Register architected timers   Alexander Graf
• [PATCH] ARM: KVM: fix L_PTE_S2_RDWR to actually be Read/Write   Alexander Graf
• [PATCH] ARM: KVM: fix L_PTE_S2_RDWR to actually be Read/Write   Alexander Graf
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Alexander Graf
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Alexander Graf
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Alexander Graf
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Alexander Graf
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Alexander Graf
• [PATCH 0/2] Early printk support for virtio console devices.   Alexander Graf
• [PATCH 0/2] Early printk support for virtio console devices.   Alexander Graf
• [PATCH 0/2] Early printk support for virtio console devices.   Alexander Graf
• [PATCH 0/2] Early printk support for virtio console devices.   Alexander Graf
• [PATCH 0/2] Early printk support for virtio console devices.   Alexander Graf
• [PATCHv3 00/14] drivers: mailbox: framework creation   Andy Green
• [PATCHv3 00/14] drivers: mailbox: framework creation   Andy Green
• [PATCHv3 00/14] drivers: mailbox: framework creation   Andy Green
• MVEBU and MVNETA driver   Greg
• MVEBU and MVNETA driver   Greg
• MVEBU and MVNETA driver   Greg
• MVEBU and MVNETA driver   Greg
• MVEBU and MVNETA driver   Greg
• [PATCH v10 0/12] Palmas updates   Graeme Gregory
• [PATCH] ARM: pxa: move debug uart code   Igor Grinberg
• [PATCH] ARM: dts: omap3-beagle-xm: Add USB Host support for Rev Ax/Bx   Igor Grinberg
• [PATCH] ARM: dts: omap3-beagle-xm: Add USB Host support for Rev Ax/Bx   Igor Grinberg
• [PATCH 0/4] ARM: dts: imx: basic dts for mx5x   Michael Grzeschik
• [PATCH 1/4] ARM: dts: imx: add imx5x usbmisc entries   Michael Grzeschik
• [PATCH 2/4] ARM: dts: imx: add imx5x usb clock DT lookups   Michael Grzeschik
• [PATCH 3/4] ARM: dts: imx: use usb-nop-xceiv usbphy entries for imx5x   Michael Grzeschik
• [PATCH 4/4] ARM: dts: imx: imx53-qsb.dts: enable usbotg and usbh1   Michael Grzeschik
• [PATCH] ARM: kirkwood: DT board setup for CloudBox   Simon Guinot
• [PATCH] ARM: kirkwood: DT board setup for CloudBox   Simon Guinot
• [PATCH] ARM: kirkwood: DT board setup for CloudBox   Simon Guinot
• [PATCH] ARM: kirkwood: DT board setup for CloudBox   Simon Guinot
• [PATCH] ARM: kirkwood: DT board setup for CloudBox   Simon Guinot
• [PATCH] ARM: kirkwood: DT board setup for CloudBox   Simon Guinot
• [PATCH v2 0/3] Add DT board setup for LaCie CloudBox   Simon Guinot
• [PATCH v2 1/3] ARM: Kirkwood: sort board entries by ASCII-code order   Simon Guinot
• [PATCH v2 2/3] ARM: Kirkwood: DT board setup for CloudBox   Simon Guinot
• [PATCH v2 3/3] ARM: Kirkwood: update Network Space Mini v2 description   Simon Guinot
• [PATCHv1 1/3] hwmon: Add support for GMT G762/G763 PWM fan controller   Simon Guinot
• [PATCHv1 1/3] hwmon: Add support for GMT G762/G763 PWM fan controller   Simon Guinot
• [PATCHv1 1/3] hwmon: Add support for GMT G762/G763 PWM fan controller   Simon Guinot
• [PATCHv1 1/3] hwmon: Add support for GMT G762/G763 PWM fan controller   Simon Guinot
• [PATCHv1 1/3] hwmon: Add support for GMT G762/G763 PWM fan controller   Simon Guinot
• [RFC PATCH v3 5/6] sched: pack the idle load balance   Vincent Guittot
• [RFC PATCH v4 00/14] sched: packing small tasks   Vincent Guittot
• [PATCH 01/14] Revert "sched: Introduce temporary FAIR_GROUP_SCHED dependency for load-tracking"   Vincent Guittot
• [PATCH 02/14] sched: add a new SD_SHARE_POWERDOMAIN flag for sched_domain   Vincent Guittot
• [PATCH 03/14] sched: pack small tasks   Vincent Guittot
• [PATCH 04/14] sched: pack the idle load balance   Vincent Guittot
• [PATCH 05/14] ARM: sched: clear SD_SHARE_POWERDOMAIN   Vincent Guittot
• [PATCH 06/14] sched: add a knob to choose the packing level   Vincent Guittot
• [PATCH 07/14] sched: agressively pack at wake/fork/exec   Vincent Guittot
• [PATCH 08/14] sched: trig ILB on an idle buddy   Vincent Guittot
• [PATCH 09/14] sched: evaluate the activity level of the system   Vincent Guittot
• [PATCH 10/14] sched: update the buddy CPU   Vincent Guittot
• [PATCH 11/14] sched: filter task pull request   Vincent Guittot
• [PATCH 12/14] sched: create a new field with available capacity   Vincent Guittot
• [PATCH 13/14] sched: update the cpu_power   Vincent Guittot
• [PATCH 14/14] sched: force migration on buddy CPU   Vincent Guittot
• [PATCH 11/14] sched: filter task pull request   Vincent Guittot
• [RFC PATCH v3 3/6] sched: pack small tasks   Vincent Guittot
• [RFC PATCH v4 00/14] sched: packing small tasks   Vincent Guittot
• [PATCH 03/14] sched: pack small tasks   Vincent Guittot
• [PATCH 03/14] sched: pack small tasks   Vincent Guittot
• [PATCH 04/14] sched: pack the idle load balance   Vincent Guittot
• [PATCH 07/14] sched: agressively pack at wake/fork/exec   Vincent Guittot
• [PATCH 08/14] sched: trig ILB on an idle buddy   Vincent Guittot
• [RFC PATCH v4 00/14] sched: packing small tasks   Vincent Guittot
• [RFC PATCH v4 00/14] sched: packing small tasks   Vincent Guittot
• [PATCH 10/14] sched: update the buddy CPU   Vincent Guittot
• mvebu-mbus: defining a DT binding   Jason Gunthorpe
• mvebu-mbus: defining a DT binding   Jason Gunthorpe
• mvebu-mbus: defining a DT binding   Jason Gunthorpe
• mvebu-mbus: defining a DT binding   Jason Gunthorpe
• [PATCH 1/5 v2] mv643xx_eth: add Device Tree bindings   Jason Gunthorpe
• mvebu-mbus: defining a DT binding   Jason Gunthorpe
• mvebu-mbus: defining a DT binding   Jason Gunthorpe
• [PATCH v2 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Jason Gunthorpe
• [PATCH 6/6] ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC   Jason Gunthorpe
• mvebu-mbus: defining a DT binding   Jason Gunthorpe
• [PATCH v4 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Jason Gunthorpe
• [PATCH v4 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Jason Gunthorpe
• [PATCH v4 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Jason Gunthorpe
• [PATCH v6 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Jason Gunthorpe
• [PATCH v6 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Jason Gunthorpe
• [PATCHv2 08/10] arm: kirkwood: convert QNAP TS219 to use DT for the PCIe interface   Jason Gunthorpe
• I/O and multiple PCI buses   Jason Gunthorpe
• [PATCH v6 0/8] Reset controller API to reset IP modules on i.MX5 and i.MX6   Shawn Guo
• [GIT PULL] reset API for 3.10   Shawn Guo
• MicroSys sbc6x support (i.MX6)   Shawn Guo
• [GIT PULL] reset API for 3.10   Shawn Guo
• MicroSys sbc6x support (i.MX6)   Shawn Guo
• [PATCH] staging: rts5139: device_reset() can be static   Shawn Guo
• [PATCH] reset: make it depend on CONFIG_OF   Shawn Guo
• ARM: dts: MicroSys sbc6x support (i.MX6)   Shawn Guo
• [PATCH 1/2] ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY   Shawn Guo
• [PATCH] ARM: mxs: Slow down the I2C clock speed   Shawn Guo
• [PATCH] pinctrl: imx5: fix SD2_DATA1 pad AUDMUX_AUD4 configuration   Shawn Guo
• [PATCH] ARM: i.MX53 Add the cko1, cko2 clock outputs.   Shawn Guo
• [PATCH] ARM: imx1: mm: add call to mxc_device_init   Shawn Guo
• [GIT PULL] imx fixes for 3.9, take 5   Shawn Guo
• [PATCH] ARM: imx: remove Makefile.boot   Shawn Guo
• [PATCH] ARM: imx: remove mx6q.h   Shawn Guo
• [PATCH 1/2] ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY   Shawn Guo
• [PATCH 0/6] Add initial imx6dl support   Shawn Guo
• [PATCH 2/6] pinctrl: add pinctrl driver for imx6sl   Shawn Guo
• [PATCH 3/6] ARM: imx: add initial imx6dl support   Shawn Guo
• [PATCH 4/6] ARM: dts: imx: make sabreauto and sabresd common   Shawn Guo
• [PATCH 5/6] ARM: dts: imx: add initial imx6dl-sabresd support   Shawn Guo
• [PATCH 6/6] ARM: dts: imx: add initial imx6dl-sabreauto support   Shawn Guo
• [PATCH] ARM: imx: do not bring up unavailable cores   Shawn Guo
• [PATCH V2 01/12] spi/mxs: Always set LOCK_CS   Shawn Guo
• [PATCH 0/6] Add initial imx6dl support   Shawn Guo
• [PATCH] ARM: imx: do not bring up unavailable cores   Shawn Guo
• [PATCH] ARM: imx: do not bring up unavailable cores   Shawn Guo
• [GIT PULL] imx fixes for 3.9, take 5   Shawn Guo
• [PATCH] pinctrl: imx5: fix SD2_DATA1 pad AUDMUX_AUD4 configuration   Shawn Guo
• [PATCH] pinctrl: imx5: fix SD2_DATA1 pad AUDMUX_AUD4 configuration   Shawn Guo
• [PATCH] pinctrl: imx5: fix SD2_DATA1 pad AUDMUX_AUD4 configuration   Shawn Guo
• [PATCH] ARM: dts: Add initial support for Wandboard Dual-Lite   Shawn Guo
• [GIT PULL] mxs fixes for 3.9, take 4   Shawn Guo
• [PATCH] ARM: imx: provide twd clock lookup from device tree   Shawn Guo
• [PATCH 1/6] pinctrl: add pinctrl driver for imx6dl   Shawn Guo
• [PATCH] ARM: imx: do not bring up unavailable cores   Shawn Guo
• [PATCH v2] ARM: dts: Add initial support for Wandboard Dual-Lite   Shawn Guo
• [PATCH 5/6] ARM: i.MX5: Add PATA and SRTC clocks   Shawn Guo
• [PATCH] ARM: dts: imx23-olinuxino: Set the sdcard as non-removable   Shawn Guo
• [PATCH v4 1/2] ARM: dts: mxs: Use 'regulator-fixed' for turning on LCD   Shawn Guo
• [PATCH] ARM i.MX6: Fix ldb_di clock selection   Shawn Guo
• [PATCH] ARM: dts: imx23-olinuxino: mark sdcard cd as broken   Shawn Guo
• [PATCH] ARM: dts: cfa10036: Add touchscreen support to the CFA-10049   Shawn Guo
• [PATCH v5] video: mxsfb: Introduce regulator support   Shawn Guo
• [PATCH v2 0/3] Get rid of big array from imx pinctrl driver   Shawn Guo
• [GIT PULL] dt: run C pre-processor on *.dts, create some standard headers   Shawn Guo
• [PATCH v2 0/3] Get rid of big array from imx pinctrl driver   Shawn Guo
• [PATCH v2 0/3] Get rid of big array from imx pinctrl driver   Shawn Guo
• [PATCH v2 0/3] Get rid of big array from imx pinctrl driver   Shawn Guo
• [PATCH 1/3] ARM: dts: Add NFC support for i.MX27 Phytec PCM038 module   Shawn Guo
• [PATCH 2/3] ARM: dts: Add SPI support for i.MX27 Phytec PCM038 module   Shawn Guo
• [PATCH 3/3] ARM: dts: Add missing imx27-phytec-phycore dtb target   Shawn Guo
• [PATCH] ARM: dts: imx51 cpu node   Shawn Guo
• [PATCH] ARM: dts: imx6dl-wandboard: Add USB Host support   Shawn Guo
• [PATCH v6] video: mxsfb: Introduce regulator support   Shawn Guo
• [GIT PULL 1/4] ARM: mxs: cleanup for 3.10   Shawn Guo
• [GIT PULL 2/4] ARM: mxs: multiplatform for 3.10   Shawn Guo
• [GIT PULL 3/4] ARM: mxs: soc changes for 3.10   Shawn Guo
• [GIT PULL 4/4] ARM: mxs: device tree changes for 3.10   Shawn Guo
• [PATCH 3/6] ARM: imx: add initial imx6dl support   Shawn Guo
• [PATCH] ARM i.MX6: Fix ldb_di clock selection   Shawn Guo
• [GIT PULL] imx fixes for 3.9, take 5   Shawn Guo
• [PATCH] ARM: imx: provide twd clock lookup from device tree   Shawn Guo
• [GIT PULL] mxs fixes for 3.9, take 4   Shawn Guo
• [PATCH v2 0/3] Get rid of big array from imx pinctrl driver   Shawn Guo
• [GIT PULL v2] imx fixes for 3.9, take 5   Shawn Guo
• [PATCH 1/3] ARM: mx28: add auart2 2 pins pinmux to imx28.dtsi   Shawn Guo
• [PATCH 0/5] i.MX53 TVE clock patches   Shawn Guo
• [PATCH 7/7] staging: drm/imx: Add support for Television Encoder (TVEv2)   Shawn Guo
• [PATCH 1/2] ARM i.MX53: remove platform ahci support   Shawn Guo
• [GIT PULL 1/4] ARM: imx: noncritical fixes for 3.10   Shawn Guo
• [GIT PULL 2/4] ARM: imx: cleanup for 3.10   Shawn Guo
• [GIT PULL 3/4] ARM: imx: soc changes for 3.10   Shawn Guo
• [GIT PULL 4/4] ARM: imx: device tree changes for 3.10   Shawn Guo
• [GIT PULL 4/4] ARM: imx: device tree changes for 3.10   Shawn Guo
• [GIT PULL v2] Reset controller API   Shawn Guo
• [PATCH] video: mxsfb: Adapt to new videomode API   Shawn Guo
• [PATCH] video: mxsfb: Adapt to new videomode API   Shawn Guo
• [PATCH] video: mxsfb: Adapt to new videomode API   Shawn Guo
• [PATCH] ARM i.MX6q: Fix periph_clk2_sel and periph2_clk2_sel clocks   Shawn Guo
• [PATCH v2] video: mxsfb: Adapt to new videomode API   Shawn Guo
• [PATCH v2] ARM: imx: Select GENERIC_ALLOCATOR   Shawn Guo
• [PATCH 0/4] ARM: dts: imx: basic dts for mx5x   Shawn Guo
• [PATCH 4/4] ARM: dts: imx: imx53-qsb.dts: enable usbotg and usbh1   Shawn Guo
• [PATCH 04/18] ARM: imx: cpuidle: create separate drivers for imx5/imx6   Shawn Guo
• [PATCH] video: mxsfb: Adapt to new videomode API   Shawn Guo
• [PATCH 04/18] ARM: imx: cpuidle: create separate drivers for imx5/imx6   Shawn Guo
• [GIT PULL v2 3/4] ARM: imx: soc changes for 3.10   Shawn Guo
• [GIT PULL 4/4] ARM: imx: device tree changes for 3.10   Shawn Guo
• [PATCH v2] ARM: imx27: Add PWM0 to device tree   Shawn Guo
• [PATCH 1/2] ARM: add diagnostic register access helpers   Shawn Guo
• [PATCH 2/2] ARM: imx: replicate the diagnostic register of boot cpu into secondary cores   Shawn Guo
• [PATCH 1/2] ARM: add diagnostic register access helpers   Shawn Guo
• [PATCH] ARM i.MX53: dts: add i2c aliases   Shawn Guo
• iMX28 DTS GPIO IRQ Definition   Shawn Guo
• iMX28 DTS GPIO IRQ Definition   Shawn Guo
• iMX28 DTS GPIO IRQ Definition   Shawn Guo
• [V3 patch 19/19] ARM: imx: cpuidle: use init/exit common routine   Shawn Guo
• [V3 patch 19/19] ARM: imx: cpuidle: use init/exit common routine   Shawn Guo
• [PATCH v2] ARM i.MX6q: Fix periph_clk2_sel and periph2_clk2_sel clocks   Shawn Guo
• [PATCH V2] ARM: i.MX5: Allow DT clock providers   Shawn Guo
• [PATCH RESEND v5 0/2] dma: imx-dma: OFTree support   Shawn Guo
• MXS framebuffer driver and 18bits display   Shawn Guo
• [PATCH] video: mxsfb: Fix colors display on lower color depth   Shawn Guo
• [PATCH V2] ARM: i.MX5: Allow DT clock providers   Shawn Guo
• [GIT PULL 4/4] ARM: imx: device tree changes for 3.10   Shawn Guo
• [PATCH] ARM: imx: move imx53-qsb audio codec clk lookup into DT   Shawn Guo
• [PATCH 1/8] ARM: mx5: Add AUDMUX4 pinctrl data   Shawn Guo
• [PATCH 5/8] ARM: mx5: Add NAND pinctrl data   Shawn Guo
• [PATCH 6/8] ARM: mx5: Add LCD IPU pinctrl data   Shawn Guo
• [PATCH 7/8] ARM: mx5: Add PWM1 pinctrl data   Shawn Guo
• [PATCH 8/8] ARM: mx5: Add support for DENX M53EVK   Shawn Guo
• [PATCH] ARM i.MX6: correct MLB clock configuration   Shawn Guo
• [PATCH 3/3] pinctrl: add MVF pinctrl driver   Shawn Guo
• [RFC PATCH v2 05/13] ARM: mach-imx: cpus/cpu nodes dts updates   Shawn Guo
• [PATCH 3/3] pinctrl: add MVF pinctrl driver   Shawn Guo
• [PATCH V2] ARM: mx5: Add support for DENX M53EVK   Shawn Guo
• [PATCH V4] ARM: i.MX5: Allow DT clock providers   Shawn Guo
• [PATCH V2] ARM: mx5: Add support for DENX M53EVK   Shawn Guo
• RFC: [PATCH] clocksource: tcb: fix min_delta calculation   Shawn Guo
• [PATCH] ASoC: don't call of_dma_request_slave_channel directly   Shawn Guo
• [PATCH V4] ARM: i.MX5: Allow DT clock providers   Shawn Guo
• [PATCH 0/2] drivers/video: mxs-fb: build fixes   Shawn Guo
• [PATCH 0/2] dma: imx-sdma: add generic DMA device tree bindings support   Shawn Guo
• [PATCH 1/2] dma: imx: change enum definitions to macros   Shawn Guo
• [PATCH 2/2] dma: imx-sdma: move to generic device tree bindings   Shawn Guo
• [PATCH 2/2] dma: imx-sdma: move to generic device tree bindings   Shawn Guo
• [PATCH 2/2] dma: imx-sdma: move to generic device tree bindings   Shawn Guo
• [PATCH 2/2] dma: imx-sdma: move to generic device tree bindings   Shawn Guo
• [PATCH v5 01/10] ASoC: phycore-ac97: Add DT support   Shawn Guo
• [PATCH v5 07/10] ASoC: fsl-ssi: imx ac97 support   Shawn Guo
• [RFC PATCH v3 07/17] ARM: dts: imx: cpus/cpu nodes dts updates   Shawn Guo
• [PATCH v2 0/2] dma: imx-sdma: add generic DMA device tree bindings support   Shawn Guo
• [PATCH v2 1/2] dma: imx: change enum definitions to macros   Shawn Guo
• [PATCH v2 2/2] dma: imx-sdma: move to generic device tree bindings   Shawn Guo
• [PATCH v2] ARM: imx: replicate the diagnostic register of boot cpu into secondary cores   Shawn Guo
• [PATCH v2] ARM: imx: replicate the diagnostic register of boot cpu into secondary cores   Shawn Guo
• [PATCH v3] ARM: imx: replicate the diagnostic register of boot cpu into secondary cores   Shawn Guo
• [PATCH v3] ARM: imx: replicate the diagnostic register of boot cpu into secondary cores   Shawn Guo
• [PATCH 1/2] ARM: dts: i.MX6: configure L2 cache data and tag latency   Shawn Guo
• [PATCH] Support fsl-dcp crypto coprocessor   Shawn Guo
• [PATCH] Support fsl-dcp crypto coprocessor   Shawn Guo
• [PATCH 21/21] mtd: omap2: allow bulding as a module   Gupta, Pekon
• [v2,1/3] ARM: dts: AM33XX: Add ELM node   Gupta, Pekon
• [v2,2/3] ARM: dts: AM33XX: Add GPMC node   Gupta, Pekon
• [v2, 3/3] ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm   Gupta, Pekon
• [PATCH] ARC: [TB10x] Adapt device tree to new compatible string   Vineet Gupta
• MicroSys sbc6x support (i.MX6)   Anatolij Gustschin
• Kexec couldn't reboot capture kernel on pandaboard ES with OMAP4460   Li Haifeng
• Kexec couldn't reboot capture kernel on pandaboard ES with OMAP4460   Li Haifeng
• [PATCH] Fix IXP4xx coherent allocations   Krzysztof Halasa
• [PATCH v3] of/pci: Provide support for parsing PCI DT ranges property   Jingoo Han
• [PATCH 6/6] ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC   Jingoo Han
• [PATCH 13/30] video/s3c: move platform_data out of arch/arm   Jingoo Han
• [PATCH 12/30] video/exynos: remove unnecessary header inclusions   Jingoo Han
• [PATCH 13/30] video/s3c: move platform_data out of arch/arm   Jingoo Han
• [PATCH V3 2/3] clk: Fixup errorhandling for clk_set_parent   Ulf Hansson
• [PATCH 1/2] clk: abstract locking out into helper functions   Ulf Hansson
• [PATCH 2/2] clk: allow reentrant calls into the clk framework   Ulf Hansson
• [PATCH V4 0/3] clk: Fixup issues for clk_set_parent   Ulf Hansson
• [PATCH V4 1/3] clk: Restructure code for __clk_reparent   Ulf Hansson
• [PATCH V4 2/3] clk: Fixup errorhandling for clk_set_parent   Ulf Hansson
• [PATCH V4 3/3] clk: Fixup locking issues for clk_set_parent   Ulf Hansson
• [PATCH 0/3] clk: ux500: Add support for ab850x clocks   Ulf Hansson
• [PATCH 1/3] clk: ux500: Add support for sysctrl clocks   Ulf Hansson
• [PATCH 2/3] clk: ux500: abx500: Define clock tree for ab850x   Ulf Hansson
• [PATCH 3/3] mfd: ab8500: sysctrl: Initialize driver at arch_initcall   Ulf Hansson
• [PATCH V2 1/3] clk: ux500: Add support for sysctrl clocks   Ulf Hansson
• [PATCH V3 1/3] clk: ux500: Add support for sysctrl clocks   Ulf Hansson
• [PATCH V4 3/3] clk: Fixup locking issues for clk_set_parent   Ulf Hansson
• [PATCH V3 1/3] clk: ux500: Add support for sysctrl clocks   Ulf Hansson
• [PATCH] cpufreq: dbx500: Round to closest available freq   Ulf Hansson
• [PATCH] PM / Runtime: Idle devices asynchronously after probe|release   Ulf Hansson
• [RESEND PATCH] PM / Runtime: Idle devices asynchronously after probe|release   Ulf Hansson
• [PATCH] PM / Runtime: Asyncronous idle|suspend devices at system resume   Ulf Hansson
• [PATCH] PM / Runtime: Asyncronous idle|suspend parent devices at removal   Ulf Hansson
• [PATCH] PM / Runtime: Improve prepare handling at system suspend for genpd   Ulf Hansson
• [PATCH] mmc: mmci: Allow MMCI to request channels with information acquired from DT   Ulf Hansson
• [PATCH 7/8] dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s   Harvey Harrison
• [PATCH 3/6] ARM: imx: add initial imx6dl support   Mathias Hasselmann
• [PATCH] cpuimx27 and mbimx27: prepend CONFIG_ to Kconfig macro   Sascha Hauer
• [PATCH] ARM: i.MX53 Add the cko1, cko2 clock outputs.   Sascha Hauer
• [PATCH] ARM: imx1: mm: add call to mxc_device_init   Sascha Hauer
• [GIT PULL] imx fixes for 3.9, take 5   Sascha Hauer
• [PATCH] i.MX PATA cleanup and i.MX51 support   Sascha Hauer
• [PATCH 1/6] ata: i.MX PATA: Use devm_clk_get   Sascha Hauer
• [PATCH 2/6] ata: i.MX PATA: cleanup error path   Sascha Hauer
• [PATCH 3/6] ata: i.MX PATA: use void __iomem * for regs   Sascha Hauer
• [PATCH 4/6] ata: i.MX PATA: add devicetree support   Sascha Hauer
• [PATCH 5/6] ARM: i.MX5: Add PATA and SRTC clocks   Sascha Hauer
• [PATCH 6/6] ARM: i.MX51: Add PATA support   Sascha Hauer
• 3.8 no mach include directory anymore?   Sascha Hauer
• [RFC PATCH] CLK: Allow parent clock and rate to be configured in DT.   Sascha Hauer
• [PATCH] ARM i.MX53: remove platform ahci support   Sascha Hauer
• [RFC PATCH] CLK: Allow parent clock and rate to be configured in DT.   Sascha Hauer
• [PATCH 1/2] ARM i.MX53: remove platform ahci support   Sascha Hauer
• [PATCH 2/2] ARM: i.MX: remove unused ARCH_* configs   Sascha Hauer
• [PATCH] ARM i.MX53: remove platform ahci support   Sascha Hauer
• [PATCH] mmc: mxcmmc: Fix bug when card is present during boot   Sascha Hauer
• [PATCH] i.MX PATA cleanup and i.MX51 support   Sascha Hauer
• [PATCH] staging: drm/imx: update TODO file   Sascha Hauer
• [PATCH 1/3] ARM/MVF600: add Vybrid Family platform support   Sascha Hauer
• [PATCH 2/3] ARM:DTS:MVF600: add basic device tree source   Sascha Hauer
• [PATCH] tty/serial: add MVF uart driver support   Sascha Hauer
• [PATCH] ARM: i.MX5 Allow DT clock providers   Sascha Hauer
• [PATCH v2 3/4] ARM: dts: mx53qsb: Add support for parallel display   Sascha Hauer
• [PATCH] tty/serial: add MVF uart driver support   Sascha Hauer
• [PATCH v2] ARM: imx27: Add PWM0 to device tree   Sascha Hauer
• [PATCH v3 2/2] video: imxfb: Add DT support   Sascha Hauer
• [PATCH v2 3/4] ARM: dts: mx53qsb: Add support for parallel display   Sascha Hauer
• [PATCH] ARM: mach-imx6q: Remove code for setting up cko clock   Sascha Hauer
• [PATCH] ARM: mach-imx6q: Remove code for setting up cko clock   Sascha Hauer
• [PATCH V3] ARM: i.MX5: Allow DT clock providers   Sascha Hauer
• [PATCH] video: imx: Add BGR666 support for parallel display   Sascha Hauer
• [PATCH 8/8] ARM: mx5: Add support for DENX M53EVK   Sascha Hauer
• [RFC][PATCH] video: imx: Select VIDEOMODE_HELPERS   Sascha Hauer
• [RFC][PATCH] video: imx: Select VIDEOMODE_HELPERS   Sascha Hauer
• [PATCH v5 01/10] ASoC: phycore-ac97: Add DT support   Sascha Hauer
• [PATCH V2] video: imx: Select VIDEOMODE_HELPERS for parallel display   Sascha Hauer
• [PATCH] documentation: iommu: add description of ARM System MMU binding   Olav Haugan
• [PATCH] documentation: iommu: add description of ARM System MMU binding   Olav Haugan
• [PATCH] documentation: iommu: add description of ARM System MMU binding   Olav Haugan
• [PATCH] documentation: iommu: add description of ARM System MMU binding   Olav Haugan
• [PATCH] documentation: iommu: add description of ARM System MMU binding   Olav Haugan
• [PATCH v3 1/2] irqchip: intc-irqpin: Add support for shared interrupt lines   Bastian Hecht
• [PATCH v3 1/2] irqchip: intc-irqpin: Add support for shared interrupt lines   Bastian Hecht
• [PATCH 2/2] ARM: shmobile: sh73a0: Suspend-to-RAM Power Off mode   Bastian Hecht
• [PATCH v3 2/7] clocksource: sh_cmt: Add OF support   Bastian Hecht
• [PATCH] ARM: hw_breakpoint: Do not use __cpuinitdata for dbg_cpu_pm_nb   Bastian Hecht
• v7_flush_kern_cache_louis flushes up to L2?   Bastian Hecht
• [PATCH] ARM: hw_breakpoint: Do not use __cpuinitdata for dbg_cpu_pm_nb   Bastian Hecht
• [PATCH] ARM: hw_breakpoint: Do not use __cpuinitdata for dbg_cpu_pm_nb   Bastian Hecht
• v7_flush_kern_cache_louis flushes up to L2?   Bastian Hecht
• v7_flush_kern_cache_louis flushes up to L2?   Bastian Hecht
• v7_flush_kern_cache_louis flushes up to L2?   Bastian Hecht
• [PATCH] ARM: shmobile: r8a7740: Add Suspend-To-RAM modes and CPUIdle   Bastian Hecht
• [PATCH] ARM: shmobile: r8a7740: Add Suspend-To-RAM modes and CPUIdle   Bastian Hecht
• [PATCH v3 2/7] clocksource: sh_cmt: Add OF support   Bastian Hecht
• [PATCH v4 1/7] ARM: shmobile: Define DT bindings for timer devices   Bastian Hecht
• [PATCH v4 2/7] clocksource: sh_cmt: Add OF support   Bastian Hecht
• [PATCH v4 3/7] clocksource: sh_tmu: Add OF support   Bastian Hecht
• [PATCH v4 4/7] ARM: shmobile: sh73a0: Add timer DT names to clock list   Bastian Hecht
• [PATCH v4 5/7] ARM: mach-shmobile: sh73a0: Setup the timer CMT10 using DT   Bastian Hecht
• [PATCH v4 6/7] ARM: shmobile: r8a7740: Add DT name to clock list for CMT10   Bastian Hecht
• [PATCH v4 7/7] ARM: mach-shmobile: r8a7740: Setup the timer CMT10 using DT   Bastian Hecht
• [PATCH] ARM: shmobile: r8a7740: Add Suspend-To-RAM modes and CPUIdle   Bastian Hecht
• [PATCH v2 1/2] ARM: shmobile: r8a7740: Add Suspend-To-RAM A3SM   Bastian Hecht
• [PATCH v2 2/2] ARM: shmobile: r8a7740: Add CPUIdle   Bastian Hecht
• [PATCH] ARM: shmobile: r8a7740: Add Suspend-To-RAM modes and CPUIdle   Bastian Hecht
• [PATCH v4 7/7] ARM: mach-shmobile: r8a7740: Setup the timer CMT10 using DT   Bastian Hecht
• [PATCH v2 1/2] ARM: shmobile: r8a7740: Add Suspend-To-RAM A3SM   Bastian Hecht
• [PATCH v2 1/2] ARM: shmobile: r8a7740: Add Suspend-To-RAM A3SM   Bastian Hecht
• [PATCH v2 1/2] ARM: shmobile: r8a7740: Add Suspend-To-RAM A3SM   Bastian Hecht
• [PATCH v3 1/2] ARM: shmobile: r8a7740: Add Suspend-To-RAM A3SM   Bastian Hecht
• [PATCH v3 2/2] ARM: shmobile: r8a7740: Add CPUIdle   Bastian Hecht
• [PATCH] ARM: shmobile: r8a7740: Add Suspend-To-RAM modes and CPUIdle   Bastian Hecht
• [PATCH v3 1/2] ARM: shmobile: r8a7740: Add Suspend-To-RAM A3SM   Bastian Hecht
• [PATCH 03/21] ARM: shmobile: don't call irqchip_init unconditionally   Bastian Hecht
• [PATCHv7 08/17] pci: PCIe driver for Marvell Armada 370/XP systems   Bjorn Helgaas
• [PATCHv7 04/17] pci: infrastructure to add drivers in drivers/pci/host   Bjorn Helgaas
• [RFCv1 08/11] PCI: Introduce new MSI chip infrastructure   Bjorn Helgaas
• [RFCv1 09/11] pci: mvebu: add MSI support   Bjorn Helgaas
• [PATCHv8 10/19] pci: PCIe driver for Marvell Armada 370/XP systems   Bjorn Helgaas
• [PATCHv3 01/10] pci: mvebu: enable driver usage on Kirkwood   Bjorn Helgaas
• I/O and multiple PCI buses   Bjorn Helgaas
• [ 3.5.y.z extended stable ] Patch "clockevents: Don't allow dummy broadcast timers" has been added to staging queue   Luis Henriques
• [PATCH 001/102] clockevents: Don't allow dummy broadcast timers   Luis Henriques
• [PATCHv2] arm: Preserve TPIDRURW on context switch   André Hentschel
• [PATCHv2] arm: Preserve TPIDRURW on context switch   André Hentschel
• [PATCHv2] arm: Preserve TPIDRURW on context switch   André Hentschel
• How to facilitate the cpuidle drivers to go to the same direction (Was: Re: [PATCH 4/9] ARM: OMAP4: cpuidle: fix wrong driver initialization)   Benjamin Herrenschmidt
• [PATCH v6 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC   Benjamin Herrenschmidt
• [PATCH v6 0/3] of/pci: Provide common support for PCI DT parsing   Benjamin Herrenschmidt
• [RFC PATCH 2/2] ARM: DT: kernel: DT cpu node bindings update   Benjamin Herrenschmidt
• [RFC PATCH 2/2] ARM: DT: kernel: DT cpu node bindings update   Benjamin Herrenschmidt
• [PATCH V2] DMA: PL330: Add check if device tree compatible   Rob Herring
• omap cpufreq driver in multi-platform kernels   Rob Herring
• [PATCH v2 0/3] ARM sched_clock selection enhancements   Rob Herring
• [PATCH v2 1/3] ARM: sched_clock: allow changing to higher frequency counter   Rob Herring
• [PATCH v2 2/3] ARM: make sched_clock just call a function pointer   Rob Herring
• [PATCH v2 3/3] ARM: arch_timer: use full 64-bit counter for sched_clock   Rob Herring
• [PATCH] of: Add missing node iteration stubs for disabled CONFIG_OF   Rob Herring
• [PATCH v2 00/13] ARM arch, sp804 and integrator timer CLKSRC_OF support   Rob Herring
• [PATCH v2 01/13] ARM: make machine_desc->init_time default to clocksource_of_init   Rob Herring
• [PATCH v2 02/13] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init   Rob Herring
• [PATCH v2 03/13] OF: add empty of_device_is_available for !OF   Rob Herring
• [PATCH v2 04/13] ARM: timer-sp: convert to use CLKSRC_OF init   Rob Herring
• [PATCH v2 05/13] ARM: highbank: use OF init for sp804 timer   Rob Herring
• [PATCH v2 06/13] ARM: vexpress: remove sp804 OF init   Rob Herring
• [PATCH v2 07/13] ARM: dts: vexpress: disable CA9 core tile sp804 timer   Rob Herring
• [PATCH v2 08/13] ARM: vexpress: remove extra timer-sp control register clearing   Rob Herring
• [PATCH v2 09/13] ARM: versatile: add versatile dtbs to dtbs target   Rob Herring
• [PATCH v2 10/13] ARM: versatile: use OF init for sp804 timer   Rob Herring
• [PATCH v2 11/13] ARM: integrator-cp: convert use CLKSRC_OF for timer init   Rob Herring
• [PATCH v2 12/13] ARM: move sp804 and integrator timers to drivers/clocksource   Rob Herring
• [PATCH v2 13/13] devtree: add binding documentation for sp804   Rob Herring
• [PATCH 08/10] arm: zynq: Add smp support   Rob Herring
• [PATCH v2] ARM: highbank: adapt to use ARM PSCI calls   Rob Herring
• [PATCH v2 12/13] ARM: move sp804 and integrator timers to drivers/clocksource   Rob Herring
• [PATCHv4 1/6] of: Add support for reading a u32 from a multi-value property.   Rob Herring
• [PATCH v2 12/13] ARM: move sp804 and integrator timers to drivers/clocksource   Rob Herring
• [PATCH] ARM: imx: do not bring up unavailable cores   Rob Herring
• [PATCH] clocksource: tegra: enable arch_timer   Rob Herring
• [PATCHv5 2/7] of: Remove duplicated code for validating property and value   Rob Herring
• [PATCH] clocksource: tegra: enable arch_timer   Rob Herring
• [PATCH v6 1/8] dt: describe base reset signal binding   Rob Herring
• [PATCH V2 1/7] kbuild: create an "include chroot" for DT bindings   Rob Herring
• [PATCH V2 1/7] kbuild: create an "include chroot" for DT bindings   Rob Herring
• [PATCH] documentation: iommu: add description of ARM System MMU binding   Rob Herring
• [PATCH] documentation: iommu: add description of ARM System MMU binding   Rob Herring
• [GIT PULL] dt: run C pre-processor on *.dts, create some standard headers   Rob Herring
• [PATCH v6 4/4] xen/arm: introduce xen_early_init, use PSCI on xen   Rob Herring
• [PATCH v3] of/pci: Provide support for parsing PCI DT ranges property   Rob Herring
• [PATCH 1/1] of/irq: store IRQ trigger/level in struct resource flags   Rob Herring
• [PATCH 1/1] of/irq: store IRQ trigger/level in struct resource flags   Rob Herring
• multi-platform broken in -next   Rob Herring
• [GIT PULL] dt: run C pre-processor on *.dts, create some standard headers   Rob Herring
• [GIT PULL 08/10] secure-exynos for v3.10   Rob Herring
• [RFC PATCH 1/3] pstore-ram: use write-combine mappings   Rob Herring
• [RFC PATCH 2/3] pstore ram: remove the power of buffer size limitation   Rob Herring
• [RFC PATCH 3/3] pstore/ram: avoid atomic accesses for ioremapped regions   Rob Herring
• [PATCH v5 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC   Rob Herring
• [RFC PATCH 1/3] pstore-ram: use write-combine mappings   Rob Herring
• [PATCH 15/18] ARM: calxeda: cpuidle: use init/exit common routine   Rob Herring
• [PATCH 05/18] cpuidle: make a single register function for all   Rob Herring
• [RFC PATCH 3/3] pstore/ram: avoid atomic accesses for ioremapped regions   Rob Herring
• [PATCH v5 2/3] of/pci: Provide support for parsing PCI DT ranges property   Rob Herring
• [PATCH v5 3/3] of/pci: mips: convert to common of_pci_range_parser   Rob Herring
• [PATCHv8 04/19] of/pci: Add of_pci_get_devfn() function   Rob Herring
• [PATCHv8 05/19] of/pci: Add of_pci_parse_bus_range() function   Rob Herring
• [PATCH v2 02/13] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init   Rob Herring
• [PATCH v2 12/13] ARM: move sp804 and integrator timers to drivers/clocksource   Rob Herring
• [RFC PATCH 01/11] Documentation: DT: arm: define CPU topology bindings   Rob Herring
• [PATCH v2 12/13] ARM: move sp804 and integrator timers to drivers/clocksource   Rob Herring
• [RFC PATCH 01/11] Documentation: DT: arm: define CPU topology bindings   Rob Herring
• [PATCH 0/4 v6] arm: introduce psci_smp_ops and use them on Xen   Rob Herring
• [GIT PULL] Timer clean-ups for 3.10, Part 2   Rob Herring
• [PATCH 0/4 v6] arm: introduce psci_smp_ops and use them on Xen   Rob Herring
• [GIT PULL] msm core for 3.10   Rob Herring
• [GIT PULL] Timer clean-ups for 3.10, Part 2   Rob Herring
• [PATCHv2 1/4] Documentation: Add memory mapped ARM architected timer binding   Rob Herring
• [RFC PATCH 1/3] pstore-ram: use write-combine mappings   Rob Herring
• [RFC PATCH 1/3] pstore-ram: use write-combine mappings   Rob Herring
• [PATCH v5 5/6] ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs   Rob Herring
• 3.8+, PL310_ERRATA_769419 and highbank: borked reboot   Rob Herring
• [GIT PULL] Timer clean-ups for 3.10, Part 2   Rob Herring
• [PATCH] ARM: highbank: fix cache flush ordering for cpu hotplug   Rob Herring
• [PATCH v5 5/6] ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs   Rob Herring
• [GIT PULL] Timer clean-ups for 3.10, Part 2   Rob Herring
• [PATCH 1/2] clocksource: arm_arch_timer: unify sched_clock init   Rob Herring
• [PATCH 2/2] clocksource: arm_arch_timer: add boot and suspend sched_clock offset   Rob Herring
• [PATCH 1/2] clocksource: arm_arch_timer: unify sched_clock init   Rob Herring
• linux-next ARM multi-platform randconfig errors   Rob Herring
• [PATCH v3] ARM: default machine descriptor for multiplatform   Rob Herring
• [PATCH v3] ARM: default machine descriptor for multiplatform   Rob Herring
• linux-next arm64 randconfig errors   Rob Herring
• [PATCH 0/4] ARM 64 bit sched_clock take #2   Rob Herring
• [PATCH 4/4] arm64: Add initial DTS for APM X-Gene Storm SOC and APM Mustang board   Rob Herring
• linux-next ARM multi-platform randconfig errors   Rob Herring
• [V4 patch 03/15] cpuidle: make a single register function for all   Rob Herring
• [PATCH V2 4/4] arm64: Add initial DTS for APM X-Gene Storm SOC and APM Mustang board   Rob Herring
• [RFC PATCH v2 03/13] ARM: mach-at91: cpus/cpu node dts updates   Rob Herring
• [PATCH] cpuidle: add maintainer entry   Rob Herring
• [PATCH] cpuidle: add maintainer entry   Rob Herring
• [PATCHv2 1/4] Documentation: Add memory mapped ARM architected timer binding   Rob Herring
• [PATCHv2 1/4] Documentation: Add memory mapped ARM architected timer binding   Rob Herring
• [RFC PATCH v3 02/17] Documentation: devicetree: arm: cpus/cpu nodes bindings updates   Rob Herring
• [PATCH 03/23] ARM: u300: device tree support for the timer   Rob Herring
• [PATCH v2] of: Set the DMA mask to 64 bits when dma_addr_t is 64-bits   Rob Herring
• [PATCH V3] of: Set the DMA mask to 64 bits when dma_addr_t is 64-bits   Rob Herring
• [PATCH v2] ARM: kirkwood: extend the kirkwood i2s driver for DT usage   Sebastian Hesselbarth
• [PATCH v4] clk: add si5351 i2c common clock driver   Sebastian Hesselbarth
• [PATCH] clk: add helper to set flags for clk-provider   Sebastian Hesselbarth
• [PATCH v5] clk: add si5351 i2c common clock driver   Sebastian Hesselbarth
• [PATCH 1/5 v2] mv643xx_eth: add Device Tree bindings   Sebastian Hesselbarth
• [PATCH 1/5 v2] mv643xx_eth: add Device Tree bindings   Sebastian Hesselbarth
• [v5] clk: add si5351 i2c common clock driver   Sebastian Hesselbarth
• [v5] clk: add si5351 i2c common clock driver   Sebastian Hesselbarth
• [PATCH] clk: add helper to set flags for clk-provider   Sebastian Hesselbarth
• [v5] clk: add si5351 i2c common clock driver   Sebastian Hesselbarth
• [PATCH] clk: export __clk_get_flags for modular clock providers   Sebastian Hesselbarth
• [PATCH v6] clk: add si5351 i2c common clock driver   Sebastian Hesselbarth
• [PATCH v6] clk: add si5351 i2c common clock driver   Sebastian Hesselbarth
• [v5] clk: add si5351 i2c common clock driver   Sebastian Hesselbarth
• [PATCH] clk: si5351: Add gapless tuning for SI5351 PLL   Sebastian Hesselbarth
• [PATCH v7] clk: add si5351 i2c common clock driver   Sebastian Hesselbarth
• [PATCH v7] clk: add si5351 i2c common clock driver   Sebastian Hesselbarth
• [PATCH v7] clk: add si5351 i2c common clock driver   Sebastian Hesselbarth
• [PATCH] net: mv643xx_eth: Add GRO support   Sebastian Hesselbarth
• [PATCH] net: mv643xx_eth: Add GRO support   Sebastian Hesselbarth
• [PATCH] net: mv643xx_eth: Add GRO support   Sebastian Hesselbarth
• [PATCH] net: mv643xx_eth: Add GRO support   Sebastian Hesselbarth
• [PATCH 0/5 v2] mv643xx_eth: device tree bindings   Sebastian Hesselbarth
• [PATCH] net: mv643xx_eth: Add GRO support   Sebastian Hesselbarth
• [PATCH] net: mv643xx_eth: remove deprecated inet_lro support   Sebastian Hesselbarth
• [PATCH v8] clk: add si5351 i2c common clock driver   Sebastian Hesselbarth
• [PATCH] net: mv643xx_eth: remove deprecated inet_lro support   Sebastian Hesselbarth
• [PATCH v2] net: mv643xx_eth: remove deprecated inet_lro support   Sebastian Hesselbarth
• [PATCH] clk: si5351: Add gapless tuning for SI5351 PLL   Sebastian Hesselbarth
• [PATCH RESEND] clk: export __clk_get_flags for modular clock providers   Sebastian Hesselbarth
• [PATCH] clk: si5351: make clk-si5351 depend on CONFIG_OF   Sebastian Hesselbarth
• [PATCH 1/2] clk: si5351: Fix clkout rate computation.   Sebastian Hesselbarth
• [PATCH 2/2] clk: si5351: Apply rate when clock-frequency is defined in devicetree.   Sebastian Hesselbarth
• [PATCH] clk: si5351: Allow to build without CONFIG_OF   Sebastian Hesselbarth
• [PATCH RESEND] ARM: dove: fix Dove cpu type from V7 to PJ4   Sebastian Hesselbarth
• [PATCH] ARM: dove: add si5351 clock driver to CuBox DT   Sebastian Hesselbarth
• [PATCH 0/2] clk: add of_clk_provider stubs to enable clk-si5351 on non OF   Sebastian Hesselbarth
• [PATCH 1/2] clk: add non CONFIG_OF routines for clk-provider   Sebastian Hesselbarth
• [PATCH 2/2] clk: si5351: Allow to build without CONFIG_OF   Sebastian Hesselbarth
• [PATCH 8/9] ARM: omap3: cpuidle: enable time keeping   Kevin Hilman
• [PATCH v2 01/18] ARM: OMAP4+: PM: Consolidate MPU subsystem PM code for re-use   Kevin Hilman
• [PATCH v2 03/18] ARM: OMAP4+: PM: Consolidate and use OMAP4 PM code for OMAP5   Kevin Hilman
• [PATCH v2 05/18] ARM: OMAP5: PM: Enables ES2 PM mode by default   Kevin Hilman
• [PATCH v2 06/18] ARM: OMAP5: PM: Enable Mercury retention mode on CPUx powerdomains   Kevin Hilman
• [PATCH v2 07/18] ARM: OMAP5: Add init_late() hook to enable pm initialization   Kevin Hilman
• [PATCH v2 08/18] ARM: OMAP5: PM: Add CPU power off in hotplug path   Kevin Hilman
• [PATCH v2 09/18] ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method   Kevin Hilman
• [PATCH v2 11/18] ARM: OMAP5: PM: Add L2 memory power down support   Kevin Hilman
• [PATCH v2 12/18] ARM: OMAP4: CPUidle: Avoid double idle driver registration   Kevin Hilman
• [PATCH v2 13/18] ARM: OMAP: CPUidle: Unregister drivere on device registration failure   Kevin Hilman
• [PATCH v2 14/18] ARM: OMAP4: CPUidle: Make C-state description field more precise   Kevin Hilman
• [PATCH v2 15/18] ARM: OMAP4+: CPUidle: Consolidate idle driver for OMAP5 support   Kevin Hilman
• [PATCH v2 17/18] ARM: OMAP4+: CPUidle: Add OMAP5 idle driver support   Kevin Hilman
• [PATCH v2 16/18] ARM: OMAP4+: CPUidle: Deprecate use of omap4_mpuss_read_prev_context_state()   Kevin Hilman
• [PATCH 8/9] ARM: omap3: cpuidle: enable time keeping   Kevin Hilman
• [PATCH v2 00/18] ARM: OMAP5: PM: Add MPUSS suspend and CPUidle support   Kevin Hilman
• [PATCH v2 08/18] ARM: OMAP5: PM: Add CPU power off in hotplug path   Kevin Hilman
• [PATCH v2 09/18] ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method   Kevin Hilman
• [PATCH v2 17/18] ARM: OMAP4+: CPUidle: Add OMAP5 idle driver support   Kevin Hilman
• [PATCH v2 00/18] ARM: OMAP5: PM: Add MPUSS suspend and CPUidle support   Kevin Hilman
• [PATCH 0/5] gpio/omap: 2nd batch of updates for v3.10   Kevin Hilman
• [PATCH v3 4/4] ARM: OMAP4+: CPUidle: Consolidate idle driver for OMAP5 support   Kevin Hilman
• [PATCH v3 0/4] ARM: OMAP4+: PM: Consolidate code for re-use on OMAP5   Kevin Hilman
• [GIT PULL] OMAP: PM: fixes for v3.10   Kevin Hilman
• [GIT PULL] OMAP: PM: cpuidle cleanups for v3.10   Kevin Hilman
• [GIT PULL 2/5] omap pm clean-up for v3.10 merge window   Kevin Hilman
• [GIT PULL 2/5] omap pm clean-up for v3.10 merge window   Kevin Hilman
• [GIT PULL 2/5] omap pm clean-up for v3.10 merge window   Kevin Hilman
• [GIT PULL] OMAP PM cleanups for v3.10   Kevin Hilman
• [GIT PULL] CPUidle: OMAP cleanups for v3.10   Kevin Hilman
• [PATCH] cpufreq: OMAP: instantiate omap-cpufreq as a platform_driver   Kevin Hilman
• [GIT PULL] CPUidle: OMAP cleanups for v3.10   Kevin Hilman
• [RESEND PATCH] PM / Runtime: Idle devices asynchronously after probe|release   Kevin Hilman
• [PATCH 1/3] cputime_nsecs: use math64.h for nsec resolution conversion helpers   Kevin Hilman
• [PATCH 1/5] gpio/omap: free irq domain in probe() failure paths   Kevin Hilman
• [PATCH] PM / Runtime: Improve prepare handling at system suspend for genpd   Kevin Hilman
• [V3 patch 03/19] ARM: OMAP3: remove cpuidle_wrap_enter   Kevin Hilman
• [V3 patch 00/19] cpuidle: code consolidation   Kevin Hilman
• [PATCH] gpio/omap: ensure gpio context is initialised   Kevin Hilman
• [PATCH] gpio/omap: ensure gpio context is initialised   Kevin Hilman
• [V3 patch 03/19] ARM: OMAP3: remove cpuidle_wrap_enter   Kevin Hilman
• [V3 patch 09/19] ARM: OMAP3: cpuidle: use init/exit common routine   Kevin Hilman
• [V3 patch 13/19] ARM: OMAP4: cpuidle: use init/exit common routine   Kevin Hilman
• [V3 patch 04/19] cpuidle: remove en_core_tk_irqen flag   Kevin Hilman
• [V3 patch 00/19] cpuidle: code consolidation   Kevin Hilman
• [GIT PULL] OMAP PM cleanups for v3.10   Kevin Hilman
• [PATCH] cpuidle: add maintainer entry   Kevin Hilman
• [PATCH] idle: fix hlt/nohlt command-line handling in new generic idle   Kevin Hilman
• Multiple issues with omap4 panda es in linux next   Kevin Hilman
• [V2 PATCH] cpuidle: add maintainer entry   Kevin Hilman
• [PATCH v2 4/6] SERIAL: OMAP: Remove the slave idle handling from the driver   Kevin Hilman
• [PATCH v2 0/6] ARM; OMAP2+: hwmod and SERIAL: Remove sysc handling from driver   Kevin Hilman
• [PATCH] idle: fix hlt/nohlt command-line handling in new generic idle   Kevin Hilman
• Query regarding clk framework - from .set_rate api   Hiremath, Vaibhav
• Query regarding clk framework - from .set_rate api   Hiremath, Vaibhav
• Query regarding clk framework - from .set_rate api   Hiremath, Vaibhav
• [RFC PATCH 3/3] ARM: OMAP2+: Add command line parameter for debugSS module control   Hiremath, Vaibhav
• [RFC PATCH 0/3] ARM: OMAP2+: Add command line parameter for debugSS module control   Hiremath, Vaibhav
• [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10   Hiremath, Vaibhav
• [RFC PATCH 3/3] ARM: OMAP2+: Add command line parameter for debugSS module control   Hiremath, Vaibhav
• [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10   Hiremath, Vaibhav
• [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10   Hiremath, Vaibhav
• [PATCH v2 11/11] ARM: OMAP2+: omap_hwmod: Don't call _init_mpu_rt_base if no sysc   Hiremath, Vaibhav
• [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10   Hiremath, Vaibhav
• [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10   Hiremath, Vaibhav
• [RFC/PATCH 0/4] dma-mapping: Define dma_{alloc, free}_attrs() for all archs   Damian Hobson-Garcia
• [RFC/PATCH 1/4] arm64: Provide default implementation for dma_{alloc, free}_attrs   Damian Hobson-Garcia
• [RFC/PATCH 1/4] arm64: Provide default implementation for dma_{alloc, free}_attrs   Damian Hobson-Garcia
• [PATCH v2 0/4] dma-mapping: Define dma_{alloc, free}_attrs() for all archs   Damian Hobson-Garcia
• [PATCH v2 1/4] arm64: Provide default implementation for dma_{alloc, free}_attrs   Damian Hobson-Garcia
• [RFC PATCH v1 0/3] clk: implement remuxing during set_rate   James Hogan
• [PATCH v2 0/3] clk: implement remuxing during set_rate   James Hogan
• [PATCH v2 1/3] clk: abstract parent cache   James Hogan
• [PATCH v2 2/3] clk: add support for clock reparent on set_rate   James Hogan
• [PATCH v2 3/3] clk: clk-mux: implement remuxing on set_rate   James Hogan
• [RFC PATCH v1 0/3] clk: implement remuxing during set_rate   James Hogan
• [v8,01/12] gpio: add gpio offset in gpio range cells property   James Hogan
• [v8,01/12] gpio: add gpio offset in gpio range cells property   James Hogan
• [PATCH] ARM: shmobile: r8a73a4 SoC 64-bit DT support   Simon Horman
• [PATCH 00/03 v4] ARM: shmobile: r8a73a4 APE6EVM board support   Simon Horman
• [PATCH 3/3 v2] ARM: shmobile: bockw: add SMSC ethernet support   Simon Horman
• [GIT PULL] Renesas ARM based SoC defconfig updates for v3.10 #2   Simon Horman
• [PATCH 1/3] ARM: shmobile: marzen: defconfig: add GPIO RCAR driver support   Simon Horman
• [PATCH 2/3] ARM: shmobile: marzen: defconfig: enable GPIO LEDs driver   Simon Horman
• [PATCH 3/3] ARM: shmobile: ape6evm: add defconfig   Simon Horman
• [PATCH] ARM: shmobile: r8a7790 SoC 64-bit DT support   Simon Horman
• [PATCH 00/04 v2] ARM: shmobile: r8a7790 SoC   Simon Horman
• [PATCH v2] ARM: shmobile: Initial r8a7790 Lager board support   Simon Horman
• [GIT PULL] Renesas ARM SoC updates for v3.10 #2   Simon Horman
• [PATCH 01/30] ARM: shmobile: Initial r8a73a4 SoC support V3   Simon Horman
• [PATCH 02/30] ARM: shmobile: r8a73a4 SCIF support V3   Simon Horman
• [PATCH 03/30] ARM: shmobile: r8a73a4 IRQC support V2   Simon Horman
• [PATCH 04/30] ARM: shmobile: r8a73a4 PFC support   Simon Horman
• [PATCH 05/30] ARM: shmobile: sh73a0: wait for completion when kicking the clock   Simon Horman
• [PATCH 06/30] ARM: shmobile: add R8A7778 basis support   Simon Horman
• [PATCH 07/30] ARM: shmobile: r8a7778 SCIF support   Simon Horman
• [PATCH 08/30] ARM: shmobile: sh73a0: add irqpin DT nodes   Simon Horman
• [PATCH 09/30] ARM: shmobile: Disallow PINCTRL without GPIOLIB   Simon Horman
• [PATCH 10/30] ARM: shmobile: r8a73a4: add thermal driver support   Simon Horman
• [PATCH 11/30] ARM: shmobile: r8a7740: Migrate from INTC to GIC   Simon Horman
• [PATCH 12/30] ARM: shmobile: sh73a0: add a TWD clock   Simon Horman
• [PATCH 13/30] ARM: shmobile: sh73a0: remove DIV4_ZT* clocks   Simon Horman
• [PATCH 14/30] ARM: shmobile: sh7372: remove DIV4_ZT* clocks   Simon Horman
• [PATCH 15/30] ARM: shmobile: add struct clk_ratio and fixed ratio clock macro   Simon Horman
• [PATCH 16/30] ARM: shmobile: sh7372: use fixed ratio clock   Simon Horman
• [PATCH 17/30] ARM: shmobile: sh73a0: use fixed ratio clock   Simon Horman
• [PATCH 18/30] ARM: shmobile: r8a7740: tidyup comment/implementation mismatch   Simon Horman
• [PATCH 19/30] ARM: shmobile: r8a7740: use fixed ratio clock   Simon Horman
• [PATCH 20/30] ARM: shmobile: r8a7779: remove DIV4 clocks and use fixed ratio clock   Simon Horman
• [PATCH 21/30] ARM: shmobile: sh7372: move global functions to sh7372.h   Simon Horman
• [PATCH 22/30] ARM: shmobile: sh73a0: move global functions to sh73a0.h   Simon Horman
• [PATCH 23/30] ARM: shmobile: r8a7740: move global functions to r8a7740.h   Simon Horman
• [PATCH 24/30] ARM: shmobile: r8a7779: move global functions to r8a7779.h   Simon Horman
• [PATCH 25/30] ARM: shmobile: Initial r8a7790 SoC support   Simon Horman
• [PATCH 26/30] ARM: shmobile: r8a7790 SCIF support   Simon Horman
• [PATCH 27/30] ARM: shmobile: r8a7790 IRQC support   Simon Horman
• [PATCH 28/30] ARM: shmobile: r8a7790 PFC support   Simon Horman
• [PATCH 29/30] ARM: shmobile: r8a73a4 SoC 64-bit DT support   Simon Horman
• [PATCH 30/30] ARM: shmobile: r8a7790 SoC 64-bit DT support   Simon Horman
• [GIT PULL] Renesas ARM and SH based SoC pinmux updates for v3.10 #2   Simon Horman
• [PATCH 01/28] sh-pfc: Fix compiler warning when BUG()   Simon Horman
• [PATCH 02/28] sh: sh7269: Fix compilation by adding missing includes   Simon Horman
• [PATCH 03/28] sh-pfc: r8a7779: Remove function GPIOs   Simon Horman
• [PATCH 04/28] sh-pfc: r8a7779: Don't use GPIO enum entries   Simon Horman
• [PATCH 05/28] ARM: shmobile: r8a7779: Remove all GPIOs   Simon Horman
• [PATCH 06/28] gpio: Renesas R-Car GPIO driver V3   Simon Horman
• [PATCH 07/28] gpio-rcar: Add pinctrl support   Simon Horman
• [PATCH 08/28] ARM: shmobile: marzen: Add GPIO LEDs   Simon Horman
• [PATCH 09/28] sh-pfc: Make function GPIOs support optional   Simon Horman
• [PATCH 10/28] sh-pfc: Make GPIO support optional   Simon Horman
• [PATCH 11/28] sh-pfc: Skip gpiochip registration when no GPIO resource is found   Simon Horman
• [PATCH 12/28] sh-pfc: Configure pins as GPIOs at request time when handled externally   Simon Horman
• [PATCH 13/28] ARM: shmobile: r8a7779: Register GPIO devices   Simon Horman
• [PATCH 14/28] sh-pfc: r8a7779: Remove GPIO data   Simon Horman
• [PATCH 15/28] sh-pfc: r8a7779: Split DU input and output pixel clocks   Simon Horman
• [PATCH 16/28] sh-pfc: Add r8a73a4 pinmux support   Simon Horman
• [PATCH 17/28] sh-pfc: r8a73a4: Support sparse GPIO numbers   Simon Horman
• [PATCH 18/28] sh-pfc: r8a73a4: GPIO IRQ support   Simon Horman
• [PATCH 19/28] sh-pfc: r8a73a4: Add bias (pull-up/down) pinconf support   Simon Horman
• [PATCH 20/28] sh-pfc: r8a73a4: Add SCIF pin groups and functions   Simon Horman
• [PATCH 21/28] sh-pfc: r8a73a4: Add IRQC pin groups and functions   Simon Horman
• [PATCH 22/28] sh-pfc: r8a73a4: Remove SCIF function GPIOS   Simon Horman
• [PATCH 23/28] sh-pfc: r8a73a4: Remove IRQC function GPIOS   Simon Horman
• [PATCH 24/28] ARM: shmobile: r8a73a4: Remove SCIF function GPIOs   Simon Horman
• [PATCH 25/28] ARM: shmobile: r8a73a4: Remove IRQC function GPIOs   Simon Horman
• [PATCH 26/28] sh-pfc: r8a73a4: Remove function GPIOs   Simon Horman
• [PATCH 27/28] ARM: shmobile: r8a73a4: Remove all GPIO enums   Simon Horman
• [PATCH 28/28] sh-pfc: r8a73a4: Remove unused GPIO bias data   Simon Horman
• Renesas ARM SoC board updates for v3.10 #3   Simon Horman
• [PATCH 01/11] ARM: shmobile: add R-Car M1A Bock-W platform support   Simon Horman
• [PATCH 02/11] ARM: shmobile: kzm9g-reference: add ethernet support   Simon Horman
• [PATCH 03/11] ARM: shmobile: APE6EVM base support   Simon Horman
• [PATCH 04/11] ARM: shmobile: APE6EVM PFC support   Simon Horman
• [PATCH 05/11] ARM: shmobile: APE6EVM LAN9220 support   Simon Horman
• [PATCH 06/11] ARM: shmobile: Initial r8a7790 Lager board support   Simon Horman
• [PATCH 07/11] ARM: shmobile: mackerel: SDHI resources do not have to be numbered   Simon Horman
• [PATCH 08/11] ARM: shmobile: mackerel: remove OCR masks, where regulators are used   Simon Horman
• [PATCH 09/11] ARM: shmobile: mackerel: switch SDHI and MMCIF interfaces to slot-gpio   Simon Horman
• [PATCH 10/11] ARM: shmobile: mackerel: add interrupt names for SDHI0   Simon Horman
• [PATCH 11/11] ARM: shmobile: mackerel: clean up MMCIF vs. SDHI1 selection   Simon Horman
• [GIT PULL] Renesas ARM SoC updates for v3.10 #2   Simon Horman
• [PATCH 06/28] gpio: Renesas R-Car GPIO driver V3   Simon Horman
• Renesas ARM SoC board updates for v3.10 #3   Simon Horman
• [GIT PULL v2] Renesas ARM and SH based SoC pinmux updates for v3.10   Simon Horman
• [PATCH 01/28] sh-pfc: Fix compiler warning when BUG()   Simon Horman
• [PATCH 02/28] sh: sh7269: Fix compilation by adding missing includes   Simon Horman
• [PATCH 03/28] sh-pfc: r8a7779: Remove function GPIOs   Simon Horman
• [PATCH 04/28] sh-pfc: r8a7779: Don't use GPIO enum entries   Simon Horman
• [PATCH 05/28] ARM: shmobile: r8a7779: Remove all GPIOs   Simon Horman
• [PATCH 06/28] gpio: Renesas R-Car GPIO driver V3   Simon Horman
• [PATCH 07/28] gpio-rcar: Add pinctrl support   Simon Horman
• [PATCH 08/28] ARM: shmobile: marzen: Add GPIO LEDs   Simon Horman
• [PATCH 09/28] sh-pfc: Make function GPIOs support optional   Simon Horman
• [PATCH 10/28] sh-pfc: Make GPIO support optional   Simon Horman
• [PATCH 11/28] sh-pfc: Skip gpiochip registration when no GPIO resource is found   Simon Horman
• [PATCH 12/28] sh-pfc: Configure pins as GPIOs at request time when handled externally   Simon Horman
• [PATCH 13/28] ARM: shmobile: r8a7779: Register GPIO devices   Simon Horman
• [PATCH 14/28] sh-pfc: r8a7779: Remove GPIO data   Simon Horman
• [PATCH 15/28] sh-pfc: r8a7779: Split DU input and output pixel clocks   Simon Horman
• [PATCH 16/28] sh-pfc: Add r8a73a4 pinmux support   Simon Horman
• [PATCH 17/28] sh-pfc: r8a73a4: Support sparse GPIO numbers   Simon Horman
• [PATCH 18/28] sh-pfc: r8a73a4: GPIO IRQ support   Simon Horman
• [PATCH 19/28] sh-pfc: r8a73a4: Add bias (pull-up/down) pinconf support   Simon Horman
• [PATCH 20/28] sh-pfc: r8a73a4: Add SCIF pin groups and functions   Simon Horman
• [PATCH 21/28] sh-pfc: r8a73a4: Add IRQC pin groups and functions   Simon Horman
• [PATCH 22/28] sh-pfc: r8a73a4: Remove SCIF function GPIOS   Simon Horman
• [PATCH 23/28] sh-pfc: r8a73a4: Remove IRQC function GPIOS   Simon Horman
• [PATCH 24/28] ARM: shmobile: r8a73a4: Remove SCIF function GPIOs   Simon Horman
• [PATCH 25/28] ARM: shmobile: r8a73a4: Remove IRQC function GPIOs   Simon Horman
• [PATCH 26/28] sh-pfc: r8a73a4: Remove function GPIOs   Simon Horman
• [PATCH 27/28] ARM: shmobile: r8a73a4: Remove all GPIO enums   Simon Horman
• [PATCH 28/28] sh-pfc: r8a73a4: Remove unused GPIO bias data   Simon Horman
• [GIT PULL v2] Renesas ARM SoC board updates for v3.10 #3   Simon Horman
• [PATCH 01/11] ARM: shmobile: add R-Car M1A Bock-W platform support   Simon Horman
• [PATCH 02/11] ARM: shmobile: kzm9g-reference: add ethernet support   Simon Horman
• [PATCH 03/11] ARM: shmobile: APE6EVM base support   Simon Horman
• [PATCH 04/11] ARM: shmobile: APE6EVM PFC support   Simon Horman
• [PATCH 05/11] ARM: shmobile: APE6EVM LAN9220 support   Simon Horman
• [PATCH 06/11] ARM: shmobile: Initial r8a7790 Lager board support   Simon Horman
• [PATCH 07/11] ARM: shmobile: mackerel: SDHI resources do not have to be numbered   Simon Horman
• [PATCH 08/11] ARM: shmobile: mackerel: remove OCR masks, where regulators are used   Simon Horman
• [PATCH 09/11] ARM: shmobile: mackerel: switch SDHI and MMCIF interfaces to slot-gpio   Simon Horman
• [PATCH 10/11] ARM: shmobile: mackerel: add interrupt names for SDHI0   Simon Horman
• [PATCH 11/11] ARM: shmobile: mackerel: clean up MMCIF vs. SDHI1 selection   Simon Horman
• [PATCH v3 1/2] irqchip: intc-irqpin: Add support for shared interrupt lines   Simon Horman
• APE6EVM and Runtime PM   Simon Horman
• [PATCH] ARM: shmobile: kzm9d: resigser smsc911x platform device with id -1   Simon Horman
• [RFC/PATCH 0/7] ARCH: shmobile: defconfig consolidation   Simon Horman
• [RFC/PATCH 1/7] ARM: shmobile: prune defconfig   Simon Horman
• [RFC/PATCH 2/7] ARM: shmobile: make defconfig canonical   Simon Horman
• [RFC/PATCH 3/7] ARM: shmobile: Add kzm9d to consolidated defconfig   Simon Horman
• [RFC/PATCH 4/7] ARM: shmobile: Add mackerel to consolidated defconfig   Simon Horman
• [RFC/PATCH 5/7] ARM: shmobile: defconfig: Remove armadillo800eva defconfig   Simon Horman
• [RFC/PATCH 6/7] ARM: shmobile: defconfig: Remove kzm9d defconfig   Simon Horman
• [RFC/PATCH 7/7] ARM: shmobile: defconfig: Remove mackerel defconfig   Simon Horman
• [PATCH/RFC 2/3] ARM: shmobile: initialise clock early on kzm9g-reference   Simon Horman
• [GIT PULL v2] Renesas ARM SoC board updates for v3.10 #3   Simon Horman
• [PATCH/RFC 0/2] ARM: shmobile: DT irqpin for r8a7779 and marzen-reference   Simon Horman
• [PATCH v4 3/3] ARM: shmobile: kzm9g-reference: add CPUFreq support   Simon Horman
• APE6EVM and Runtime PM   Simon Horman
• [PATCH v2 02/13] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init   Simon Horman
• APE6EVM and Runtime PM   Simon Horman
• [PATCH] irqchip: irqc: Add runtime PM support   Simon Horman
• APE6EVM and Runtime PM   Simon Horman
• [PATCH 00/04] ARM: shmobile: pinmux platform device cleanups   Simon Horman
• [PATCH 1/2] ARM: shmobile: R8A7779: add Ether support   Simon Horman
• [PATCH 0/5 v3] ARM: shmobile: Add SMSC support on Bock-W   Simon Horman
• [RFC/PATCH 8/7] ARCH: shmobile: defconfig consolidation   Simon Horman
• [RFC/PATCH 8/7] ARCH: shmobile: defconfig consolidation (repost)   Simon Horman
• [PATCH 1/2] ARM: shmobile: R8A7779: add Ether support   Simon Horman
• [PATCH 1/2] ARM: shmobile: R8A7779: add Ether support   Simon Horman
• [RFC/PATCH 0/7] ARCH: shmobile: defconfig consolidation   Simon Horman
• [PATCH v3 1/2] irqchip: intc-irqpin: Add support for shared interrupt lines   Simon Horman
• [PATCH v4 3/3] ARM: shmobile: kzm9g-reference: add CPUFreq support   Simon Horman
• [PATCH 1/8] ARM: shmobile:Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code   Simon Horman
• [PATCH 4/8] rcar-phy: remove EHCI internal buffer setup   Simon Horman
• [PATCH 5/8] rcar-phy: correct base address   Simon Horman
• [PATCH 7/8] ARM: shmobile: Marzen: pass platform data to USB PHY device   Simon Horman
• [RFC/PATCH 0/7] ARCH: shmobile: defconfig consolidation   Simon Horman
• [PATCH] ARM: shmobile: marzen-reference: use irqpin for lan   Simon Horman
• [PATCH/RFC 0/2] ARM: shmobile: DT irqpin for r8a7779 and marzen-reference   Simon Horman
• [PATCH v2 1/2] ARM: shmobile: R8A7779: add Ether support   Simon Horman
• [PATCH v2 2/2] ARM: shmobile: R8A7778: add Ether support   Simon Horman
• [PATCH 00/04] ARM: shmobile: pinmux platform device cleanups   Simon Horman
• [PATCH/RFC 0/2] ARM: shmobile: DT irqpin for r8a7779 and marzen-reference   Simon Horman
• [PATCH/RFC 2/3] ARM: shmobile: initialise clock early on kzm9g-reference   Simon Horman
• [PATCH 1/3] ARM: also support TWD clock, instantiated from platform data   Simon Horman
• [PATCH] ARM: shmobile: kzm9d: resigser smsc911x platform device with id -1   Simon Horman
• [PATCH] irqchip: irqc: Add runtime PM support   Simon Horman
• [GIT PULL] Renesas ARM based SoC bockw defconfig updates for v3.10   Simon Horman
• [PATCH] ARM: shmobile: bockw: enable SMSC ethernet on defconfig   Simon Horman
• [GIT PULL] Renesas ARM r8a7779 SoC update for v3.10   Simon Horman
• [PATCH 1/2] ARM: shmobile: r8a7779: add each clocks ratio on comment area   Simon Horman
• [PATCH 2/2] ARM: shmobile: R8A7779: add Ether support   Simon Horman
• [GIT PULL] Renesas ARM-based SoC bockw board updates for v3.10   Simon Horman
• [PATCH 1/2] ARM: shmobile: bockw: add SMSC ethernet support   Simon Horman
• [PATCH 2/2] ARM: shmobile: bockw: enable network settings on bootargs   Simon Horman
• [RFC/PATCH 0/7] ARCH: shmobile: defconfig consolidation   Simon Horman
• [GIT PULL] Renesas ARM r8a7778 SoC update for v3.10   Simon Horman
• [PATCH 1/3] ARM: shmobile: r8a7778: remove pointless PLATFORM_INFO()   Simon Horman
• [PATCH 2/3] ARM: shmobile: r8a7778: add r8a7778_init_irq_extpin()   Simon Horman
• [PATCH 3/3] ARM: shmobile: R8A7778: add Ether support   Simon Horman
• [PATCH] irqchip: irqc: Add runtime PM support   Simon Horman
• [PATCH] irqchip: irqc: Add runtime PM support   Simon Horman
• [PATCH 00/02] ARM: shmobile: r8a7790 Lager arch timer fixes   Simon Horman
• [PATCH 00/02] ARM: shmobile: r8a7790 Lager arch timer fixes   Simon Horman
• [RFC/PATCH 0/7] ARCH: shmobile: defconfig consolidation   Simon Horman
• [PATCH 0/8] Reorganize R8A7779/Marzen USB code   Simon Horman
• [PATCH 00/02] ARM: shmobile: r8a7790 Lager arch timer fixes   Simon Horman
• [PATCH v2 0/9] Reorganize R8A7779/Marzen USB code   Simon Horman
• [PATCH v3] irqchip: renesas-intc-irqpin: DT binding for sense bitfield width   Simon Horman
• [PATCH] ARM: shmobile: Include all 2 GiB of memory on APE6EVM   Simon Horman
• [PATCH 00/02] ARM: shmobile: r8a7790 Lager arch timer fixes   Simon Horman
• [PATCH] ARM: shmobile: marzen-reference: use irqpin for lan   Simon Horman
• [PATCH 2/2] ARM: shmobile: sh73a0: Suspend-to-RAM Power Off mode   Simon Horman
• [PATCH v3 2/7] clocksource: sh_cmt: Add OF support   Simon Horman
• [PATCH 0/8] Reorganize R8A7779/Marzen USB code   Simon Horman
• [PATCH] ARM: shmobile: marzen-reference: use irqpin for lan   Simon Horman
• [PATCH] ARM: shmobile: Include all 2 GiB of memory on APE6EVM   Simon Horman
• [PATCH] ARM: shmobile: Include all 2 GiB of memory on APE6EVM   Simon Horman
• [PATCH 1/2] ARM: shmobile: R8A7778: fix Ether device name   Simon Horman
• [PATCH 2/2] ARM: shmobile: R8A7779: fix Ether device name   Simon Horman
• [PATCH v3] irqchip: renesas-intc-irqpin: DT binding for sense bitfield width   Simon Horman
• [PATCH/RFC 0/2] ARM: shmobile: DT irqpin for r8a7779 and marzen-reference   Simon Horman
• [PATCH v2] ARM: shmobile: marzen-reference: use irqpin for lan   Simon Horman
• [PATCH/RFC 2/2] ARM: shmobile: marzen-reference: add irqpin support in DT   Simon Horman
• [PATCH v2] ARM: shmobile: marzen-reference: use irqpin for lan   Simon Horman
• [PATCH v2] ARM: shmobile: marzen-reference: use irqpin for lan   Simon Horman
• [PATCH/RFC 0/2] ARM: shmobile: DT irqpin for r8a7779 and marzen-reference   Simon Horman
• [PATCH] ARM: shmobile: Include all 2 GiB of memory on APE6EVM   Simon Horman
• [PATCH v3 0/9] Reorganize R8A7779/Marzen USB code   Simon Horman
• [GIT PULL] Renesas ARM and SH based SoC pinmux fixes for v3.10   Simon Horman
• [PATCH] sh-pfc: r8a7779: tidyup intc_irq3_b typo   Simon Horman
• [PATCH v3 0/9] Reorganize R8A7779/Marzen USB code   Simon Horman
• [PATCH v2 02/13] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init   Simon Horman
• [PATCH v3 0/9] Reorganize R8A7779/Marzen USB code   Simon Horman
• [PATCH 0/4] Add USB support to R8A7778/BOCK-W   Simon Horman
• [PATCH 11/18] ARM: shmobile: cpuidle: use init/exit common routine   Simon Horman
• [PATCH 1/2] ARM: r8a7740: Add interim sh-eth device name to clocks list   Simon Horman
• [GIT PULL] Renesas ARM based r8a7790 SoC update for v3.10   Simon Horman
• [PATCH 1/2] ARM: shmobile: Add second I/O range for r8a7790 PFC   Simon Horman
• [PATCH 2/2] ARM: shmobile: force enable of r8a7790 arch timer   Simon Horman
• [GIT PULL] Renesas ARM based SoC lager board updates for v3.10   Simon Horman
• [PATCH] ARM: shmobile: use r8a7790 timer setup code on Lager   Simon Horman
• [GIT PULL] Renesas ARM based SoC lager board updates for v3.10   Simon Horman
• [PATCH] ARM: shmobile: r8a7740: Add Suspend-To-RAM modes and CPUIdle   Simon Horman
• [PATCH v3 0/9] Reorganize R8A7779/Marzen USB code   Simon Horman
• [V2 patch 01/19] ARM: shmobile: cpuidle: remove shmobile_enter_wfi function   Simon Horman
• [PATCH v2 1/2] ARM: shmobile: r8a7740: Add Suspend-To-RAM A3SM   Simon Horman
• [PATCH v4 7/7] ARM: mach-shmobile: r8a7740: Setup the timer CMT10 using DT   Simon Horman
• [V2 patch 01/19] ARM: shmobile: cpuidle: remove shmobile_enter_wfi function   Simon Horman
• [V3 patch 01/19] ARM: shmobile: cpuidle: remove shmobile_enter_wfi function   Simon Horman
• [V3 patch 02/19] ARM: shmobile: cpuidle: remove shmobile_enter_wfi prototype   Simon Horman
• [V3 patch 12/19] ARM: shmobile: cpuidle: use init/exit common routine   Simon Horman
• [PATCH v4 7/7] ARM: mach-shmobile: r8a7740: Setup the timer CMT10 using DT   Simon Horman
• [PATCH v2 1/2] ARM: shmobile: r8a7740: Add Suspend-To-RAM A3SM   Simon Horman
• [PATCH] arm: shmobile: armadillo800eva: Fix maximum number of SCIF   Simon Horman
• [RFC PATCH 2/2] ARM: DT: kernel: DT cpu node bindings update   Simon Horman
• [PATCH v4 7/7] ARM: mach-shmobile: r8a7740: Setup the timer CMT10 using DT   Simon Horman
• [PATCH] ARM: shmobile: add missing include of of.h   Simon Horman
• [PATCH 2/2] ARM: shmobile: BOCK-W: enable I2C in defconfig   Simon Horman
• [PATCH 4/4] ARM: shmobile: Marzen: enable VIN and ADV7180 in defconfig   Simon Horman
• [PATCH] ARM: shmobile: r8a7740: Add Suspend-To-RAM modes and CPUIdle   Simon Horman
• [PATCH 2/2] ARM: shmobile: BOCK-W: enable I2C in defconfig   Simon Horman
• [PATCH v5 2/3] ARM: shmobile: kzm9g-reference: add AS3711 and CPUFreq DT bindings   Simon Horman
• [PATCH v5 3/3] ARM: shmobile: sh73a0: add CPUFreq support   Simon Horman
• [PATCH v5 1/3] ARM: shmobile: sh73a0: add support for adjusting CPU frequency   Simon Horman
• [PATCH] ARM: shmobile: BOCK-W: enable CONFIG_PM_RUNTIME in defconfig   Simon Horman
• [PATCH v3 4/4] ARM: shmobile: BOCK-W: enable USB in defconfig   Simon Horman
• [PATCH v3 4/4] ARM: shmobile: BOCK-W: enable USB in defconfig   Simon Horman
• [PATCH 4/4] ARM: shmobile: Marzen: enable VIN and ADV7180 in defconfig   Simon Horman
• [PATCH v2 1/2] ARM: shmobile: R8A7779: add Ether support   Simon Horman
• [PATCH 1/8] ARM: shmobile:Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code   Simon Horman
• [PATCH v5 1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code   Simon Horman
• [PATCH v4 0/4] Add USB support to R8A7778/BOCK-W   Simon Horman
• [PATCH] ARM: shmobile: lager: Add GPIO LEDs   Simon Horman
• [PATCH] ARM: shmobile: sh73a0: Use IORESOURCE_MEM_* everywhere   Simon Horman
• [PATCH 1/8] ARM: shmobile:Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code   Simon Horman
• [PATCH v3 4/4] ARM: shmobile: BOCK-W: enable USB in defconfig   Simon Horman
• [PATCH 0/5] OKI ML86V7667 driver and R8A7778/BOCK-W VIN support   Simon Horman
• [PATCH v2 0/1] Add I2C support to R8A7778/BOCK-W   Simon Horman
• [PATCH v2 2/4] ARM: shmobile: r8a7779: add VIN support   Simon Horman
• [PATCH v2 0/1] Add I2C support to R8A7778/BOCK-W   Simon Horman
• [PATCH] ARM: shmobile: lager: Add GPIO LEDs   Simon Horman
• [PATCH] ARM: shmobile: lager: Add GPIO LEDs   Simon Horman
• [PATCH] ARM: shmobile: sh73a0: Use IORESOURCE_MEM_* everywhere   Simon Horman
• [PATCH v2 2/4] ARM: shmobile: r8a7779: add VIN support   Simon Horman
• [PATCH v5 1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code   Simon Horman
• [RFC PATCH v2 09/13] ARM: mach-shmobile: cpus/cpu nodes dts updates   Simon Horman
• [PATCH v2 0/1] Add I2C support to R8A7778/BOCK-W   Simon Horman
• [PATCH] ARM: shmobile: sh73a0: Use DEFINE_RES_MEM*() everywhere   Simon Horman
• [PATCH] ARM: shmobile: lager: Add GPIO LEDs   Simon Horman
• [PATCH] ARM: shmobile: lager: Add GPIO LEDs   Simon Horman
• [PATCH v3 1/2] ARM: shmobile: r8a7740: Add Suspend-To-RAM A3SM   Simon Horman
• [PATCH v3 1/2] ARM: shmobile: r8a7740: Add Suspend-To-RAM A3SM   Simon Horman
• [RFC PATCH v3 14/17] ARM: dts: sh7372: cpus/cpu nodes dts updates   Simon Horman
• [RFC PATCH v3 13/17] ARM: dts: r8a7740: cpus/cpu nodes dts updates   Simon Horman
• [PATCH v3 1/2] ARM: shmobile: r8a7740: Add Suspend-To-RAM A3SM   Simon Horman
• [PATCH 03/21] ARM: shmobile: don't call irqchip_init unconditionally   Simon Horman
• [PATCH 11/21] irqdomain: export irq_domain_add_simple   Simon Horman
• [PATCH] ARM: shmobile: lager: Add GPIO LEDs   Simon Horman
• [PATCH 0/6] ARM: shmobile: r8a7740: add MMCIF and SDHI to DT   Simon Horman
• [PATCH 03/21] ARM: shmobile: don't call irqchip_init unconditionally   Simon Horman
• [PATCH] ARM: shmobile: sh73a0: Use DEFINE_RES_MEM*() everywhere   Simon Horman
• [PATCH] ARM: shmobile: lager: Add GPIO LEDs   Simon Horman
• [PATCH 03/21] ARM: shmobile: don't call irqchip_init unconditionally   Simon Horman
• [RFC PATCH v2] rtc: rtc-at91rm9200: manage IMR depending on revision   Johan Hovold
• [PATCH] Revert "drivers/rtc/rtc-at91rm9200.c: use a variable for storing IMR"   Johan Hovold
• [RFC PATCH v2] rtc: rtc-at91rm9200: manage IMR depending on revision   Johan Hovold
• [PATCH] rtc: rtc-at91sam9.c add DT support   Johan Hovold
• [PATCH 1/2] ARM: at91/setup: fix trivial typos   Johan Hovold
• [PATCH 2/2] ARM: at91: remove trailing semicolon from macros   Johan Hovold
• [PATCH] rtc: rtc-at91sam9.c add DT support   Johan Hovold
• [RFC 1/5] ARM: at91: add general purpose backup register (GPBR) support   Johan Hovold
• [RFC 4/5] RTC: rtc-at91sam9: add device-tree support   Johan Hovold
• [RFC 4/5] RTC: rtc-at91sam9: add device-tree support   Johan Hovold
• [RFC 4/5] RTC: rtc-at91sam9: add device-tree support   Johan Hovold
• [RFC 1/5] ARM: at91: add general purpose backup register (GPBR) support   Johan Hovold
• [RFC 4/5] RTC: rtc-at91sam9: add device-tree support   Johan Hovold
• [PATCH v2 0/5] ARM: at91: fix hanged boot   Johan Hovold
• [rtc-linux] Re: [PATCH v2 0/5] ARM: at91: fix hanged boot   Johan Hovold
• [PATCH 25/26] arm: Don't use create_proc_read_entry() [RFC]   David Howells
• [PATCH 25/26] arm: Don't use create_proc_read_entry() [RFC]   David Howells
• [PATCH V3 2/2] dmaengine: OMAP: Register SDMA controller with Device Tree DMA driver   Jon Hunter
• [GIT PULL] ARM: OMAP2+: System timer updates   Jon Hunter
• [RFC][BUG] arm/dts: OMAP3: set #interrupt-cells to two   Jon Hunter
• [GIT PULL] ARM: OMAP2+: GPMC updates   Jon Hunter
• [GIT PULL] ARM: OMAP2+: GPMC updates   Jon Hunter
• [PATCH] ARM: dts: OMAP4+: Correct L3 interrupts   Jon Hunter
• [PATCH 0/5] gpio/omap: 2nd batch of updates for v3.10   Jon Hunter
• [PATCH 1/5] gpio/omap: free irq domain in probe() failure paths   Jon Hunter
• [PATCH 2/5] gpio/omap: remove extra context restores in *_runtime_resume()   Jon Hunter
• [PATCH 3/5] gpio/omap: optimise interrupt service routine   Jon Hunter
• [PATCH 4/5] gpio/omap: force restore if context loss is not detectable   Jon Hunter
• [PATCH 5/5] ARM: dts: OMAP2+: Identify GPIO banks that are always powered   Jon Hunter
• [PATCH 5/5] ARM: dts: OMAP2+: Identify GPIO banks that are always powered   Jon Hunter
• [PATCH 0/5] gpio/omap: 2nd batch of updates for v3.10   Jon Hunter
• [PATCH 1/3] ARM: dts: Update OMAP3430 SDP NAND and ONENAND properties   Jon Hunter
• [PATCH 2/3] ARM: dts: Add NOR flash bindings for OMAP2420 H4   Jon Hunter
• [PATCH 3/3] ARM: dts: Add OMAP3430 SDP NOR flash memory binding   Jon Hunter
• [PATCH 3/3] ARM: dts: Add OMAP3430 SDP NOR flash memory binding   Jon Hunter
• [PATCH] Documentation: dt: update properties in TI GPMC NAND example   Jon Hunter
• [PATCH 4/5] gpio/omap: force restore if context loss is not detectable   Jon Hunter
• [PATCH 1/5] gpio/omap: free irq domain in probe() failure paths   Jon Hunter
• [PATCH 4/5] gpio/omap: force restore if context loss is not detectable   Jon Hunter
• [PATCH v2 11/11] ARM: OMAP2+: omap_hwmod: Don't call _init_mpu_rt_base if no sysc   Jon Hunter
• [PATCH V4 10/18] ARM: OMAP2+: Add function to read GPMC settings from device-tree   Jon Hunter
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Jon Hunter
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Jon Hunter
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Jon Hunter
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Jon Hunter
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Jon Hunter
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Jon Hunter
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Jon Hunter
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Jon Hunter
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Jon Hunter
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Jon Hunter
• [PATCH] ARM: dts: omap4-panda: Add LED support into the panda DTS files   Jon Hunter
• [PATCH] gpio/omap: ensure gpio context is initialised   Jon Hunter
• [PATCH 1/2] ARM: dts: OMAP5: add PWM capability to timer nodes missing it   Jon Hunter
• [PATCH] gpio/omap: ensure gpio context is initialised   Jon Hunter
• [PATCH] gpio/omap: ensure gpio context is initialised   Jon Hunter
• [PATCH] gpio/omap: ensure gpio context is initialised   Jon Hunter
• [PATCH] gpio/omap: ensure gpio context is initialised   Jon Hunter
• linux-next ARM multi-platform randconfig errors   Jon Hunter
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Jon Hunter
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Jon Hunter
• [GIT PULL] ARM: OMAP2+: GPMC fixes for v3.10   Jon Hunter
• [PATCH] ARM: dts: OMAP2+: Simplify NAND support   Jon Hunter
• [PATCH] Fix IXP4xx coherent allocations   Ben Hutchings
• [PATCH] ARM: autcpu12: Fix config check in autcpu12_init_late()   Ben Hutchings
• [01/74] clockevents: Don't allow dummy broadcast timers   Ben Hutchings
• [PATCH] net: mv643xx_eth: Add GRO support   Ben Hutchings
• [PATCH 0/5 v2] mv643xx_eth: device tree bindings   Ben Hutchings
• [PATCH v4 1/6] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH v4 1/6] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH v4 1/6] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH v4 0/6] Generic PHY Framework   Kishon Vijay Abraham I
• [PATCH v4 0/6] Generic PHY Framework   Kishon Vijay Abraham I
• [PATCH v5 0/6] Generic PHY Framework   Kishon Vijay Abraham I
• [PATCH v5 1/6] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH v5 2/6] usb: phy: omap-usb2: use the new generic PHY framework   Kishon Vijay Abraham I
• [PATCH v5 3/6] usb: otg: twl4030: use the new generic PHY framework   Kishon Vijay Abraham I
• [PATCH v5 4/6] ARM: OMAP: USB: Add phy binding information   Kishon Vijay Abraham I
• [PATCH v5 5/6] ARM: dts: omap: update usb_otg_hs data   Kishon Vijay Abraham I
• [PATCH v5 6/6] usb: musb: omap2430: use the new generic PHY framework   Kishon Vijay Abraham I
• [PATCH v5 1/6] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH v5 1/6] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH v5 1/6] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH v5 1/6] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH v5 1/6] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH] ARM: OMAP4: PM: fix PM regression introduced by recent clock cleanup   Kishon Vijay Abraham I
• [PATCH v5 1/6] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH] ARM: OMAP4: HWMOD: make 'ocp2scp_usb_phy_phy_48m" as the main clock   Kishon Vijay Abraham I
• [PATCH] ARM: OMAP4: HWMOD: make 'ocp2scp_usb_phy_phy_48m" as the main clock   Kishon Vijay Abraham I
• [PATCH v2] ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock   Kishon Vijay Abraham I
• [PATCH v3 0/6] Generic PHY Framework   Kishon Vijay Abraham I
• [PATCH v3 1/6] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH v3 0/6] Generic PHY Framework   Kishon Vijay Abraham I
• [PATCH v3 1/6] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH v3 1/6] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• Multiple issues with omap4 panda es in linux next   Kishon Vijay Abraham I
• linux-next ARM multi-platform randconfig errors   Kishon Vijay Abraham I
• [PATCH] ARM: OMAP4: change the device names in usb_bind_phy   Kishon Vijay Abraham I
• Multiple issues with omap4 panda es in linux next   Kishon Vijay Abraham I
• Multiple issues with omap4 panda es in linux next   Kishon Vijay Abraham I
• [PATCH v6 0/9] Generic PHY Framework   Kishon Vijay Abraham I
• [PATCH v6 1/9] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH v6 2/9] usb: phy: omap-usb2: use the new generic PHY framework   Kishon Vijay Abraham I
• [PATCH v6 3/9] usb: phy: twl4030: use the new generic PHY framework   Kishon Vijay Abraham I
• [PATCH v6 4/9] usb: phy: twl4030: twl4030 shouldn't be subsys_initcall   Kishon Vijay Abraham I
• [PATCH v6 5/9] ARM: OMAP: USB: Add phy binding information   Kishon Vijay Abraham I
• [PATCH v6 6/9] ARM: dts: omap: update usb_otg_hs data   Kishon Vijay Abraham I
• [PATCH v6 7/9] usb: musb: omap2430: use the new generic PHY framework   Kishon Vijay Abraham I
• [PATCH v6 8/9] usb: phy: omap-usb2: remove *set_suspend* callback from omap-usb2   Kishon Vijay Abraham I
• [PATCH v6 9/9] usb: phy: twl4030-usb: remove *set_suspend* and *phy_init* ops   Kishon Vijay Abraham I
• [PATCH] Revert "OMAP/serial: Fix incorrect Rx FIFO threshold setting, LSR validation on Tx, and Tx FIFO IRQ generation"   Grazvydas Ignotas
• [PATCH] Revert "OMAP/serial: Fix incorrect Rx FIFO threshold setting, LSR validation on Tx, and Tx FIFO IRQ generation"   Grazvydas Ignotas
• [PATCH 2/2] ARM: remove mach .init_irq for irqchip_init users   Jamie Iles
• dw_apb_timer_of.c: remove parts that were picoxcell-specific   Jamie Iles
• [PATCH 06/21] ALSA: ali5451: use mdelay instead of large udelay constants   Takashi Iwai
• [PATCH 07/21] oss/dmabuf: use dma_map_single   Takashi Iwai
• [PATCH] arm: shmobile: armadillo800eva: Fix maximum number of SCIF   Nobuhiro Iwamatsu
• [PATCH 0/3] Dual EMAC mode implementation of CPSW   Mark Jackson
• [PATCH 0/3] Dual EMAC mode implementation of CPSW   Mark Jackson
• [PATCH 3/3] driver: net: ethernet: cpsw: dual emac interface implementation   Mark Jackson
• [PATCH 0/3] Dual EMAC mode implementation of CPSW   Mark Jackson
• [PATCH 0/3] Dual EMAC mode implementation of CPSW   Mark Jackson
• [PATCH 0/3] Dual EMAC mode implementation of CPSW   Mark Jackson
• [PATCH 0/3] Dual EMAC mode implementation of CPSW   Mark Jackson
• [PATCH 0/3] Dual EMAC mode implementation of CPSW   Mark Jackson
• [PATCH 0/3] Dual EMAC mode implementation of CPSW   Mark Jackson
• [PATCH] remove vlan tags in CPSW dual emac mode   Mark Jackson
• gpio-pxa initcall level change and machine init breakage   Robert Jarzmik
• gpio-pxa initcall level change and machine init breakage   Robert Jarzmik
• [PATCH v2] mmc: dwmmc: let device core setup the default pin configuration   Seungwon Jeon
• [PATCH v3] mmc: dw_mmc: let device core setup the default pin configuration   Seungwon Jeon
• [PATCH v4] mmc: dw_mmc: let device core setup the default pin configuration   Seungwon Jeon
• [PATCH] ARM: timer: Shutdown clock event device when stopping local timer   Ning Jiang
• [PATCH 3/3] pinctrl: add MVF pinctrl driver   Lu Jingchang-B35083
• [PATCH] ARM: LPC32xx: changed lpc23xx_restart to lpc32xx_restart   Olof Johansson
• [PATCH] ARM: autcpu12: Fix config check in autcpu12_init_late()   Olof Johansson
• [PATCH] arm: vt8500: Add wm8850 config options to multi_v7_defconfig   Olof Johansson
• [GIT PULL v2] at91: soc for 3.10 #2   Olof Johansson
• [GIT PULL] Preparatory GIC patches for arm64 support   Olof Johansson
• [PATCH 1/2] ARM: irq: Call irqchit_init if no init_irq function is specified   Olof Johansson
• [GIT PULL] at91: tiny cleanup for 3.10 #2   Olof Johansson
• [PATCHv2 00/10] ARM: sunxi: Architecture cleanups and rework   Olof Johansson
• How to facilitate the cpuidle drivers to go to the same direction (Was: Re: [PATCH 4/9] ARM: OMAP4: cpuidle: fix wrong driver initialization)   Olof Johansson
• [PATCH v2] ARM: at91: add Acme Systems Aria G25 board   Olof Johansson
• [GIT PULL] at91: DT changes for 3.10 #2   Olof Johansson
• [GIT PULL] Renesas ARM based SoC defconfig updates for v3.10 #2   Olof Johansson
• [GIT PULL] Renesas ARM SoC updates for v3.10 #2   Olof Johansson
• [PATCH 06/28] gpio: Renesas R-Car GPIO driver V3   Olof Johansson
• [PATCH V7 2/2] ARM: bcm281xx: Add timer driver (DT portion)   Olof Johansson
• [PATCH V7 2/2] ARM: bcm281xx: Add timer driver (DT portion)   Olof Johansson
• [PATCH] MAINTAINERS: Add maintainer for LPC32xx   Olof Johansson
• [GIT PULL] Preparatory GIC patches for arm64 support   Olof Johansson
• [GIT PULL] at91: soc for 3.10 #2   Olof Johansson
• [PATCH 06/28] gpio: Renesas R-Car GPIO driver V3   Olof Johansson
• [GIT PULL] ARM: LPC32xx: defconfig update   Olof Johansson
• [GIT PULL] imx fixes for 3.9, take 5   Olof Johansson
• [GIT PULL v2] Renesas ARM and SH based SoC pinmux updates for v3.10   Olof Johansson
• [GIT PULL v2] Renesas ARM SoC board updates for v3.10 #3   Olof Johansson
• [PATCH] video: implement a dumb framebuffer driver   Olof Johansson
• [PATCHv2 1/2] ARM: socfpga: Enable soft reset   Olof Johansson
• [PATCHv2 1/2] ARM: socfpga: Enable soft reset   Olof Johansson
• [GIT PULL] Reset controller API   Olof Johansson
• [GIT PULL] at91: DT changes for 3.10 #2   Olof Johansson
• [GIT PULL] Multi Cluster Power Management infrastructure   Olof Johansson
• [PATCH v4 14/15] ARM: Enable selection of SMP operations at boot time   Olof Johansson
• [PATCH v4 15/15] ARM: vexpress: Select multi-cluster SMP operation if required   Olof Johansson
• [PATCH v4 03/15] ARM: mcpm: introduce helpers for platform coherency exit/setup   Olof Johansson
• [PATCH 2/2] ARM: at91: move dts to subdir   Olof Johansson
• [PATCH 1/2] ARM: boot/dts/Makefile: drop '\'   Olof Johansson
• [GIT PULL] ARM: bcm281xx firmware tags   Olof Johansson
• [PATCHv2 00/10] ARM: sunxi: Architecture cleanups and rework   Olof Johansson
• [PATCH 0/4 v6] arm: introduce psci_smp_ops and use them on Xen   Olof Johansson
• linux-next: manual merge of the arm-soc tree with the pm tree   Olof Johansson
• [GIT PULL] ARM: bcm281xx firmware tags   Olof Johansson
• [GIT PULL][for 3.10] pull request from armsoc/pxa branch in pxa git tree   Olof Johansson
• [PATCH] ARM: vexpress: Remove A9 PMU compatible values for non-A9 platforms   Olof Johansson
• [GIT PULL 1/4] ARM: imx: noncritical fixes for 3.10   Olof Johansson
• [GIT PULL 2/4] ARM: imx: cleanup for 3.10   Olof Johansson
• [GIT PULL v2] Reset controller API   Olof Johansson
• [GIT PULL v2] Reset controller API   Olof Johansson
• [PATCH v6 3/8] reset: Add driver for gpio-controlled reset pins   Olof Johansson
• [GIT PULL] Sunxi Cleanups for 3.10   Olof Johansson
• [GIT PULL] sunXi DT additions for 3.10, take 3   Olof Johansson
• [GIT PULL 5/5] omap dt changes for v3.10 merge window   Olof Johansson
• [PATCH v6 3/8] reset: Add driver for gpio-controlled reset pins   Olof Johansson
• [PATCH] ARM: EXYNOS: no more support non-DT for EXYNOS SoCs   Olof Johansson
• [GIT PULL v2] Reset controller API   Olof Johansson
• [GIT PULL] Renesas ARM and SH based SoC pinmux fixes for v3.10   Olof Johansson
• [GIT PULL] Renesas ARM based r8a7790 SoC update for v3.10   Olof Johansson
• [GIT PULL] Renesas ARM based SoC lager board updates for v3.10   Olof Johansson
• [GIT PULL 8/8] ARM: tegra: defconfig changes   Olof Johansson
• [GIT PULL v2] Reset controller API   Olof Johansson
• [PATCH] arm: vt8500: Add SDHC support to WM8505 DT   Olof Johansson
• [GIT PULL v3] Reset controller API   Olof Johansson
• [GIT PULL v3] Reset controller API   Olof Johansson
• [GIT PULL] Timer clean-ups for 3.10, Part 2   Olof Johansson
• [GIT PULL v2 3/4] ARM: imx: soc changes for 3.10   Olof Johansson
• [GIT PULL] [for 3.10] pull request from armsoc/dt branch in pxa git tree   Olof Johansson
• [GIT PULL] [for 3.10] pull request from armsoc/dt branch in pxa git tree   Olof Johansson
• [PATCHv3 1/3] ARM: socfpga: Enable soft reset   Olof Johansson
• [PATCH 1/2] GPIO: clps711x: Rewrite driver for using generic GPIO code   Olof Johansson
• [GIT PULL] msm core for 3.10   Olof Johansson
• [GIT PULL] msm fixes for 3.10   Olof Johansson
• [GIT PULL] msm cleanup for 3.10   Olof Johansson
• [GIT PULL 2/3] ARM: davinci: SoC updates for v3.10 (part 2)   Olof Johansson
• [PATCH v6 2/3] ARM: dts: Add i2c-arbitrator bus for exynos5250-snow   Olof Johansson
• [PATCH v6 3/3] ARM: dts: Add sbs-battery for exynos5250-snow   Olof Johansson
• [GIT PULL 2/3] ARM: davinci: SoC updates for v3.10 (part 2)   Olof Johansson
• [GIT PULL] Timer clean-ups for 3.10, Part 2   Olof Johansson
• [GIT PULL] Timer clean-ups for 3.10, Part 2   Olof Johansson
• [GIT PULL] Timer clean-ups for 3.10, Part 2   Olof Johansson
• [PATCH] ARM: shmobile: add missing include of of.h   Olof Johansson
• linux-next: useless merges   Olof Johansson
• [GIT PULL 2/4] mvebu soc for v3.10   Olof Johansson
• [GIT PULL V2 1/4] mvebu driver changes for v3.10   Olof Johansson
• [GIT PULL 2/4] mvebu soc for v3.10   Olof Johansson
• [GIT PULL 4/4] mvebu dt for v3.10   Olof Johansson
• [GIT PULL] mvebu dt (LPAE) for v3.10   Olof Johansson
• [GIT PULL] mvebu irqchip for v3.10   Olof Johansson
• [GIT PULL v2 1/3] ARM: davinci: DT updates for v3.10 (part 2)   Olof Johansson
• [GIT PULL v2 3/3] ARM: davinci: board updates for v3.10 (part 2)   Olof Johansson
• [GIT PULL] mvebu irqchip for v3.10   Olof Johansson
• [GIT PULL 4/4] ARM: imx: device tree changes for 3.10   Olof Johansson
• [PATCH 1/3] ARM: tegra: fix build error when THUMB2_KERNEL enabled   Olof Johansson
• [PATCH 2/3] ARM: tegra: fix relocation truncated error when THUMB2_KERNEL enabled   Olof Johansson
• [PATCH 3/3] ARM: tegra: make sure the pointer on 4 byte align when THUMB2_KERNEL enabled   Olof Johansson
• [PATCH] ARM: tegra: pm: fix build error w/o PM_SLEEP   Olof Johansson
• [PATCH] ARM: tegra: solve adr range issue with THUMB2_KERNEL enabled   Olof Johansson
• [PATCH] ARM: highbank: fix cache flush ordering for cpu hotplug   Olof Johansson
• [PATCHv4 00/11] Remove ARM local timer API   Olof Johansson
• linux-next: build failure after merge of the arm-soc tree   Olof Johansson
• [GIT PULL V2 1/4] mvebu driver changes for v3.10   Olof Johansson
• [GIT PULL V3 1/4] mvebu driver changes for v3.10   Olof Johansson
• [GIT PULL V3 1/4] mvebu driver changes for v3.10   Olof Johansson
• [GIT PULL] ARM: arm-soc fixes for 3.9   Olof Johansson
• [GIT PULL] omap dss board clean-up for v3.10 merge window   Olof Johansson
• [GIT PULL] at91: soc for 3.10 #3   Olof Johansson
• [GIT PULL] sunXi dt additions, take 4   Olof Johansson
• [PATCH] ARM: exynos: restore mach/regs-clock.h for exynos5   Olof Johansson
• [GIT PULL] OMAP PM cleanups for v3.10   Olof Johansson
• [PATCH 4/4] arm64: Add initial DTS for APM X-Gene Storm SOC and APM Mustang board   Olof Johansson
• [GIT PULL] Late Exynos stuff for v3.10   Olof Johansson
• Exynos regressions w.r.t. config and debuggability due to multiplatform   Olof Johansson
• [PATCH 0/3] dts: v8500: Cleanups for 3.10   Olof Johansson
• [PATCH] ARM: dts: add pinctrl nodes for Exynos5250 SoC   Olof Johansson
• [PATCH] ARM: dts: add pinctrl nodes for Exynos5250 SoC   Olof Johansson
• [PATCH] clk: add option to keep boot clocks on   Olof Johansson
• [PATCH] ARM: exynos: dts: cros5250: add cyapa trackpad   Olof Johansson
• [PATCH] ARM: exynos: dts: cros5250: add EC device   Olof Johansson
• [PATCH] ARM: u300: fix ages old copy/paste bug   Olof Johansson
• [PATCH 1/4] clocksource: nomadik-mtu: fix up clocksource/timer   Olof Johansson
• [PATCH/RESEND] ARM: arch_timer: Silence debug preempt warnings   Olof Johansson
• [PATCH] clk: add option to keep boot clocks on   Olof Johansson
• [PATCH v3 00/13] ARM: EXYNOS: Fix Universal C210 support   Olof Johansson
• [GIT PULL] musb regression on omap4 for v3.9   Olof Johansson
• Exynos regressions w.r.t. config and debuggability due to multiplatform   Olof Johansson
• [GIT PULL] Samsung fixes-1 for v3.10   Olof Johansson
• [PATCH] ARM: exynos: dts: cros5250: add EC device   Olof Johansson
• [GIT PULL] ARM: arm-soc: one more patch for 3.9   Olof Johansson
• [PATCH] clk: add option to keep boot clocks on   Olof Johansson
• [PATCH v2] clk: add clk_ignore_unused option to keep boot clocks on   Olof Johansson
• [PATCH] ARM: exynos: dts: cros5250: add EC device   Olof Johansson
• [PATCH v2] ARM: exynos: dts: cros5250: add EC device   Olof Johansson
• [PATCH v3 00/13] ARM: EXYNOS: Fix Universal C210 support   Olof Johansson
• [PATCH v3 11/13] ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC   Olof Johansson
• [GIT PULL] Late Samsung stuff (v3) for v3.10   Olof Johansson
• [PATCH V2] video: implement a simple framebuffer driver   Olof Johansson
• [PATCH RESEND] ARM: ux500: update V-INTCORE constraints   Lee Jones
• [PATCH] ARM: ux500: update V-INTCORE constraints   Lee Jones
• [PATCH 1/9] ARM: ux500: Increase the size of the PRCMU's TCPM size   Lee Jones
• [PATCH 2/9] ARM: ux500: Remove incorrect DB9540 PRCMU TCDM base location   Lee Jones
• [PATCH 3/9] ARM: ux500: Supply a DTS file for the u8540 platform   Lee Jones
• [PATCH 4/9] ARM: ux500: Move Snowball's thermal DT node into existing PRCMU one   Lee Jones
• [PATCH 5/9] ARM: ux500: Over-ride TCDM size when booting the DB8540 platform   Lee Jones
• [PATCH 6/9] ARM: ux500: Create a new of_dev_auxdata structure for u8540 enablement   Lee Jones
• [PATCH 7/9] ARM: ux500: Add a VQMMC (level-shifting) regulator DT node for Snowball   Lee Jones
• [PATCH 8/9] mfd: db8500-prcmu: Return early if the TCPM cannot be located   Lee Jones
• [PATCH 9/9] mfd: db8500-prcmu: Support platform dependant device selection   Lee Jones
• [PATCH 4/9] ARM: ux500: Move Snowball's thermal DT node into existing PRCMU one   Lee Jones
• [PATCH] ARM: ux500: Supply a DTS file for the u8540 platform   Lee Jones
• [PATCH] ARM: ux500: Over-ride TCDM size when booting the DB8540 platform   Lee Jones
• [PATCH 1/2] mfd: db8500-prcmu: Return early if the TCPM cannot be located   Lee Jones
• [PATCH 2/2] mfd: db8500-prcmu: Support platform dependant device selection   Lee Jones
• [PATCH 1/2] mfd: db8500-prcmu: Return early if the TCPM cannot be located   Lee Jones
• [PATCH 2/2] mfd: db8500-prcmu: Support platform dependant device selection   Lee Jones
• [PATCH 9/9] mfd: db8500-prcmu: Support platform dependant device selection   Lee Jones
• [PATCH 1/2] mfd: db8500-prcmu: Return early if the TCPM cannot be located   Lee Jones
• [PATCH 2/2] mfd: db8500-prcmu: Support platform dependant device selection   Lee Jones
• [GIT PULL] AB8500 Power and MFD related updates   Lee Jones
• [PATCH 1/5] ARM: ux500: Move DMA40 platform data includes file out to include/   Lee Jones
• [PATCH 2/5] dmaengine: ste_dma40: Assign memcpy channels in the driver   Lee Jones
• [PATCH 3/5] dmaengine: ste_dma40: Move default memcpy configs into the driver   Lee Jones
• [PATCH 4/5] dmaengine: ste_dma40: Only configure a channel during a configure request   Lee Jones
• [PATCH 5/5] dmaengine: ste_dma40: Move LCPA allocation and real-time config   Lee Jones
• [PATCH 1/5] ARM: ux500: Move DMA40 platform data includes file out to include/   Lee Jones
• [PATCH 4/5] dmaengine: ste_dma40: Do not configure channels during an channel allocation   Lee Jones
• [PATCH 4/5] dmaengine: ste_dma40: Do not configure channels during an channel allocation   Lee Jones
• [PATCH 1/2] mfd: db8500-prcmu: Return early if the TCPM cannot be located   Lee Jones
• [PATCH 2/2] mfd: db8500-prcmu: Support platform dependant device selection   Lee Jones
• [PATCH 1/8] dmaengine: ste_dma40: Assign memcpy channels in the driver   Lee Jones
• [PATCH 2/8] dmaengine: ste_dma40: Move default memcpy configs into the driver   Lee Jones
• [PATCH 3/8] dmaengine: ste_dma40: Actually write the runtime configuration to registers   Lee Jones
• [PATCH 4/8] dmaengine: ste_dma40: Do not configure channels during an channel allocation   Lee Jones
• [PATCH 5/8] dmaengine: ste_dma40: Ensure src and dst registers are configured correctly   Lee Jones
• [PATCH 6/8] dmaengine: ste_dma40: Move LCPA allocation and real-time config   Lee Jones
• [PATCH 7/8] dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s   Lee Jones
• [PATCH 8/8] ARM: ux500: Amalgamate DMA source and destination channel numbers   Lee Jones
• [PATCH 3/8] dmaengine: ste_dma40: Actually write the runtime configuration to registers   Lee Jones
• [PATCH 5/8] dmaengine: ste_dma40: Ensure src and dst registers are configured correctly   Lee Jones
• [PATCH 7/8] dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s   Lee Jones
• [PATCH 2/2 v2] mfd: db8500-prcmu: Support platform dependant device selection   Lee Jones
• [PATCH 7/8] dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s   Lee Jones
• [PATCH 3/8] dmaengine: ste_dma40: Actually write the runtime configuration to registers   Lee Jones
• [PATCH 4/8] dmaengine: ste_dma40: Do not configure channels during an channel allocation   Lee Jones
• [PATCH 1/5] ARM: ux500: Move DMA40 platform data includes file out to include/   Lee Jones
• [PATCH] ARM: ux500: DT: Rename root node "soc-u9500" into "soc-ux500"   Lee Jones
• [PATCH 3/8] dmaengine: ste_dma40: Actually write the runtime configuration to registers   Lee Jones
• [PATCH 3/8] dmaengine: ste_dma40: Actually write the runtime configuration to registers   Lee Jones
• [PATCH 3/8] dmaengine: ste_dma40: Actually write the runtime configuration to registers   Lee Jones
• [PATCH] mmc: mmci: Allow MMCI to request channels with information acquired from DT   Lee Jones
• [PATCH] dw_dmac: Couple of small fixups; use of '_' over '-' and a cell-num typo   Lee Jones
• [PATCH] mmc: mmci: Allow MMCI to request channels with information acquired from DT   Lee Jones
• [PATCH] mmc: mmci: Allow MMCI to request channels with information acquired from DT   Lee Jones
• [PATCH v2] serial: pl011: Add Device Tree support to request DMA channels   Lee Jones
• [PATCH v2] serial: pl011: Add Device Tree support to request DMA channels   Lee Jones
• [PATCH 00/32] dmaengine: Refactor the DMA40 driver   Lee Jones
• [PATCH 01/32] dmaengine: ste_dma40: Assign memcpy channels in the driver   Lee Jones
• [PATCH 02/32] dmaengine: ste_dma40: Move default memcpy configs into the driver   Lee Jones
• [PATCH 03/32] dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s   Lee Jones
• [PATCH 04/32] dmaengine: ste_dma40: Amalgamate DMA source and destination channel numbers   Lee Jones
• [PATCH 05/32] dmaengine: ste_dma40: Supply macros to resolve 'src' and 'dst' directions   Lee Jones
• [PATCH 06/32] ARM: ux500: Strip out duplicate USB DMA configuration   Lee Jones
• [PATCH 07/32] ARM: ux500: Supply address location names for the DMA40 DMA controller   Lee Jones
• [PATCH 08/32] dmaengine: ste_dma40: Optimise local MAX() macro   Lee Jones
• [PATCH 09/32] ARM: ux500: Remove unused 'data_width' attributes from SDI DMA configs   Lee Jones
• [PATCH 10/32] ARM: ux500: Remove unused 'data_width' attributes from SSP DMA configs   Lee Jones
• [PATCH 11/32] ARM: ux500: Remove unused 'data_width' attributes from UART DMA configs   Lee Jones
• [PATCH 12/32] ARM: ux500: Remove superfluous 'psize' attribute from Audio platform data   Lee Jones
• [PATCH 13/32] dmaengine: ste_dma40: Calculate number of logical channels from physical ones   Lee Jones
• [PATCH 14/32] dmaengine: ste_dma40: Remove 'always true' checking   Lee Jones
• [PATCH 15/32] dmaengine: ste_dma40: Separate Logical Global Interrupt Mask (GIM) unmasking   Lee Jones
• [PATCH 16/32] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()   Lee Jones
• [PATCH 17/32] dmaengine: ste_dma40: Remove redundant argument from d40_phy_cfg()   Lee Jones
• [PATCH 18/32] dmaengine: ste_dma40: Don't configure runtime configurable setup during allocate   Lee Jones
• [PATCH 19/32] dmaengine: ste_dma40: Move more setup into the configuration routines   Lee Jones
• [PATCH 20/32] dmaengine: ste_dma40: Move rev error-check up to revision acquisition   Lee Jones
• [PATCH 21/32] dmaengine: ste_dma40: Also report the number of logical channels   Lee Jones
• [PATCH 22/32] dmaengine: ste_dma40: Allocate plat_data on declaration   Lee Jones
• [PATCH 23/32] dmaengine: ste_dma40: Allow driver to be probe()able when DT is enabled   Lee Jones
• [PATCH 24/32] dmaengine: ste_dma40: Supply full Device Tree parsing support   Lee Jones
• [PATCH 25/32] ARM: ux500: Setup the DMA40 driver's DT node using the new DMA API   Lee Jones
• [PATCH 26/32] ARM: ux500: Supply UART's DMA configuration via Device Tree   Lee Jones
• [PATCH 27/32] ARM: ux500: Stop registering DMA40 from platform data when DT is enabled   Lee Jones
• [PATCH 28/32] ARM: ux500: Pass remnant platform data though to DMA40 driver   Lee Jones
• [PATCH 29/32] ARM: ux500: Stop passing UART's platform data for Device Tree boots   Lee Jones
• [PATCH 30/32] ARM: ux500: Supply MMC DMA configuration via Device Tree   Lee Jones
• [PATCH 31/32] ARM: ux500: Stop passing MMC's platform data for Device Tree boots   Lee Jones
• [PATCH 32/32] ARM: ux500: Move SDI (MMC) and UART devices under more descriptive heading   Lee Jones
• [PATCH 0/9] Fix ux500 crypto drivers and init DMA in the correct way   Lee Jones
• [PATCH 1/9] crypto: ux500/hash - Prepare clock before enabling it   Lee Jones
• [PATCH 2/9] crypto: ux500/hash - Set DMA configuration though dma_slave_config()   Lee Jones
• [PATCH 3/9] ARM: ux500: Stop passing Hash DMA channel config information though pdata   Lee Jones
• [PATCH 4/9] crypto: ux500/cryp - Prepare clock before enabling it   Lee Jones
• [PATCH 5/9] crypto: ux500/cryp - Fix compile error   Lee Jones
• [PATCH 6/9] crypto: ux500/cryp - Set DMA configuration though dma_slave_config()   Lee Jones
• [PATCH 7/9] ARM: ux500: Stop passing Cryp DMA channel config information though pdata   Lee Jones
• [PATCH 8/9] crypto: ux500/[cryp|hash] - Show successful start-up in the bootlog   Lee Jones
• [PATCH 9/9] ARM: ux500: Register Cyrp and Hash platform drivers on Snowball   Lee Jones
• [PATCH 03/32] dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s   Lee Jones
• [PATCH 07/32] ARM: ux500: Supply address location names for the DMA40 DMA controller   Lee Jones
• [PATCH 07/32] ARM: ux500: Supply address location names for the DMA40 DMA controller   Lee Jones
• [PATCH 24/32] dmaengine: ste_dma40: Supply full Device Tree parsing support   Lee Jones
• [PATCH 24/32] dmaengine: ste_dma40: Supply full Device Tree parsing support   Lee Jones
• [PATCH 24/32 v2] dmaengine: ste_dma40: Supply full Device Tree parsing support   Lee Jones
• [PATCH 03/32 v2] dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s   Lee Jones
• [PATCH 24/32 v2] dmaengine: ste_dma40: Supply full Device Tree parsing support   Lee Jones
• [PATCH 24/32 v3] dmaengine: ste_dma40: Supply full Device Tree parsing support   Lee Jones
• [PATCH 4/9 v2] crypto: ux500/cryp - Prepare clock before enabling it   Lee Jones
• [PATCH 1/9 v2] crypto: ux500/hash - Prepare clock before enabling it   Lee Jones
• [PATCH 13/32] dmaengine: ste_dma40: Calculate number of logical channels from physical ones   Lee Jones
• [PATCH 21/32] dmaengine: ste_dma40: Also report the number of logical channels   Lee Jones
• [PATCH 17/32] dmaengine: ste_dma40: Remove redundant argument from d40_phy_cfg()   Lee Jones
• [PATCH 05/32] dmaengine: ste_dma40: Supply macros to resolve 'src' and 'dst' directions   Lee Jones
• [PATCH 21/32] dmaengine: ste_dma40: Also report the number of logical channels   Lee Jones
• [PATCH 15/32] dmaengine: ste_dma40: Separate Logical Global Interrupt Mask (GIM) unmasking   Lee Jones
• [PATCH 14/23] regulator: ab3100: device tree support   Lee Jones
• [PATCH 08/32] dmaengine: ste_dma40: Optimise local MAX() macro   Lee Jones
• [PATCH 00/10] usb: musb: ux500: pathe the way for Device Tree enablement   Lee Jones
• [PATCH 01/10] usb: musb: ux500: move channel number knowledge into the driver   Lee Jones
• [PATCH 02/10] usb: musb: ux500: move the MUSB HDRC configuration into the driver   Lee Jones
• [PATCH 03/10] usb: musb: ux500: take the dma_mask from coherent_dma_mask   Lee Jones
• [PATCH 04/10] usb: musb: ux500: harden checks for platform data   Lee Jones
• [PATCH 05/10] usb: musb: ux500: attempt to find channels by name before using pdata   Lee Jones
• [PATCH 06/10] usb: musb: ux500: add device tree probing support   Lee Jones
• [PATCH 07/10] ARM: ux500: Add an auxdata entry for MUSB for clock-name look-up   Lee Jones
• [PATCH 08/10] ARM: ux500: Populate the ux500-musb Device Tree entry   Lee Jones
• [PATCH 09/10] ARM: ux500: Remove ux500-musb platform registation when booting with DT   Lee Jones
• [PATCH 10/10] ARM: ux500: Remove empty function u8500_of_init_devices()   Lee Jones
• [PATCH] ARM: ux500: Over-ride TCDM size when booting the DB8540 platform   Lee Jones
• [PATCH 04/10] usb: musb: ux500: harden checks for platform data   Lee Jones
• [PATCH 08/10 v2] ARM: ux500: Populate the ux500-musb Device Tree entry   Lee Jones
• [PATCH 06/10 v2] usb: musb: ux500: add device tree probing support   Lee Jones
• [PATCH] ARM: ux500: Supply a DTS file for the u8540 platform   Lee Jones
• [PATCH 21/32] dmaengine: ste_dma40: Also report the number of logical channels   Lee Jones
• [PATCH 21/32 v2] dmaengine: ste_dma40: Also report the number of logical channels   Lee Jones
• [PATCH 08/32 v2] dmaengine: ste_dma40: Remove home-brew MAX() macro   Lee Jones
• [PATCH 15/32] dmaengine: ste_dma40: Separate Logical Global Interrupt Mask (GIM) unmasking   Lee Jones
• [PATCH 05/32] dmaengine: ste_dma40: Supply macros to resolve 'src' and 'dst' directions   Lee Jones
• [PATCH 17/32] dmaengine: ste_dma40: Remove redundant argument from d40_phy_cfg()   Lee Jones
• [PATCH] mmc: mmci: Allow MMCI to request channels with information acquired from DT   Lee Jones
• [PATCH 04/10 v2] usb: musb: ux500: harden checks for platform data   Lee Jones
• [PATCH 05/10 v2] usb: musb: ux500: attempt to find channels by name before using pdata   Lee Jones
• [PATCH 03/32 v2] dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s   Lee Jones
• [PATCH 03/32] dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s   Lee Jones
• [PATCH 03/32 v3] dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s   Lee Jones
• [PATCH v2] mmc: mmci: Allow MMCI to request channels with information acquired from DT   Lee Jones
• [PATCH 03/32 v3] dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s   Lee Jones
• [PATCH 04/32] dmaengine: ste_dma40: Amalgamate DMA source and destination channel numbers   Lee Jones
• [PATCH 09/32] ARM: ux500: Remove unused 'data_width' attributes from SDI DMA configs   Lee Jones
• [PATCH 08/32] dmaengine: ste_dma40: Optimise local MAX() macro   Lee Jones
• [PATCH 07/32] ARM: ux500: Supply address location names for the DMA40 DMA controller   Lee Jones
• [PATCH 05/32] dmaengine: ste_dma40: Supply macros to resolve 'src' and 'dst' directions   Lee Jones
• [PATCH 14/32] dmaengine: ste_dma40: Remove 'always true' checking   Lee Jones
• [PATCH 13/32] dmaengine: ste_dma40: Calculate number of logical channels from physical ones   Lee Jones
• [PATCH 30/32] ARM: ux500: Supply MMC DMA configuration via Device Tree   Lee Jones
• [PATCH 30/32] ARM: ux500: Supply MMC DMA configuration via Device Tree   Lee Jones
• [PATCH 09/32] ARM: ux500: Remove unused 'data_width' attributes from SDI DMA configs   Lee Jones
• [PATCH 04/32] dmaengine: ste_dma40: Amalgamate DMA source and destination channel numbers   Lee Jones
• [PATCH 6/9] crypto: ux500/cryp - Set DMA configuration though dma_slave_config()   Lee Jones
• [PATCH 5/9] crypto: ux500/cryp - Fix compile error   Lee Jones
• [PATCH 1/9 v2] crypto: ux500/hash - Prepare clock before enabling it   Lee Jones
• [PATCH 1/6] dmaengine: Refactor the DMA40 driver - continued   Lee Jones
• [PATCH 1/6] ARM: ux500: Replace ST-E's home-brew DMA direction definition with the generic one   Lee Jones
• [PATCH 2/6] dmaengine: ste_dma40: Replace ST-E's home-brew DMA direction defs with generic ones   Lee Jones
• [PATCH 3/6] ARM: ux500: Remove recently unused stedma40_xfer_dir enums   Lee Jones
• [PATCH 4/6] dmaengine: ste_dma40_ll: Use the BIT macro to replace ugly '(1 << x)'s   Lee Jones
• [PATCH 5/6] dmaengine: ste_dma40: Convert data_width from register bit format to value   Lee Jones
• [PATCH 6/6] dmaengine: ste_dma40_ll: Replace meaningless register set with comment   Lee Jones
• [PATCH 03/32 v4] dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s   Lee Jones
• [PATCH 32/32] ARM: ux500: Move SDI (MMC) and UART devices under more descriptive heading   Lee Jones
• [PATCH 04/32] dmaengine: ste_dma40: Amalgamate DMA source and destination channel numbers   Lee Jones
• [PATCH 00/10] usb: musb: ux500: pathe the way for Device Tree enablement   Lee Jones
• [PATCH] mmc: mmci: Allow MMCI to request channels with information acquired from DT   Lee Jones
• [PATCH 1/5] dmaengine: ste_dma40: Allow memcpy channels to be configured from DT   Lee Jones
• [PATCH 2/5] ARM: ux500: Pass DMA memcpy channels though Device Tree   Lee Jones
• [PATCH 3/5] ARM: ux500: Stop passing DMA platform data though AUXDATA   Lee Jones
• [PATCH 4/5] dmaengine: ste_dma40: Fetch the number of physical channels from DT   Lee Jones
• [PATCH 5/5] dmaengine: ste_dma40: Fetch disabled channels from DT   Lee Jones
• [PATCH v7 3/3] of/pci: mips: convert to common of_pci_range_parser   Gabor Juhos
• [PATCH v7 3/3] of/pci: mips: convert to common of_pci_range_parser   Gabor Juhos
• Need help to measure and tune the latency in Linux RT   Ashoka K
• [PATCH v1] ARM: do not select ARCH_VEXPRESS by default on ARCH_MULTI_V7   Srinivas KANDAGATLA
• [PATCH v1] ARM: do not select ARCH_VEXPRESS by default on ARCH_MULTI_V7   Srinivas KANDAGATLA
• [PATCH] OMAP/serial: Revert bad fix of Rx FIFO threshold granularity   Greg KH
• [PATCH] Revert "drivers/rtc/rtc-at91rm9200.c: use a variable for storing IMR"   Greg KH
• [PATCH V5 0/6] USB: EHCI multiplatform for 3.10   Greg KH
• [PATCH v7 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Greg KH
• [PATCH v7 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Greg KH
• [PATCH] drivers: memory: Introduce Marvell EBU Device Bus driver   Greg KH
• [PATCH V3 2/5] spi: s3c64xx: added support for polling mode   Girish KS
• [PATCH V3 2/5] spi: s3c64xx: added support for polling mode   Girish KS
• [PATCH V3 4/5] spi: s3c64xx: Added provision for dedicated cs pin   Girish KS
• [PATCH V3 4/5] spi: s3c64xx: Added provision for dedicated cs pin   Girish KS
• [PATCH V3 4/5] spi: s3c64xx: Added provision for dedicated cs pin   Girish KS
• [PATCH V3 4/5] spi: s3c64xx: Added provision for dedicated cs pin   Girish KS
• [PATCH] ahci: sata: add support for exynos5440 sata   Girish KS
• [PATCH V4 2/5] spi: s3c64xx: added support for polling mode   Girish KS
• [PATCH V4 2/5] spi: s3c64xx: added support for polling mode   Girish KS
• [PATCH 1/3] spi: s3c64xx: added support for polling mode   Girish KS
• [PATCH 2/3] spi: s3c64xx: Added provision for dedicated cs pin   Girish KS
• [PATCH V6 0/4] cpufreq: exynos5440: support for cpufreq driver   Amit Daniel Kachhap
• [PATCH V6 1/4] cpufreq: exynos: Add cpufreq driver for exynos5440   Amit Daniel Kachhap
• [PATCH V6 2/4] cpufreq: exynos: Remove error return even if no soc is found   Amit Daniel Kachhap
• [PATCH V6 3/4] arm: exynos: Enable OPP library support for exynos5440   Amit Daniel Kachhap
• [PATCH V6 4/4] arm: dts: Add cpufreq controller node for Exynos5440 SoC   Amit Daniel Kachhap
• [RESEND PATCH V6 1/4] cpufreq: exynos: Add cpufreq driver for exynos5440   Amit Daniel Kachhap
• [PATCH] cpufreq: exynos5440: Protect opp search calls with rcu lock   Amit Daniel Kachhap
• [PATCH 0/4] arm64: Initial patch-set for APM X-Gene SOC family   Vinayak Kale
• [PATCH 1/4] arm64: Add Kconfig option for APM X-Gene SOC family   Vinayak Kale
• [PATCH 2/4] arm64: Initial defconfig for APM X-Gene SOC family   Vinayak Kale
• [PATCH 3/4] arm64: Add defines for APM ARMv8 implementation   Vinayak Kale
• [PATCH 4/4] arm64: Add initial DTS for APM X-Gene Storm SOC and APM Mustang board   Vinayak Kale
• [PATCH 4/4] arm64: Add initial DTS for APM X-Gene Storm SOC and APM Mustang board   Vinayak Kale
• [PATCH 2/4] arm64: Initial defconfig for APM X-Gene SOC family   Vinayak Kale
• [PATCH 4/4] arm64: Add initial DTS for APM X-Gene Storm SOC and APM Mustang board   Vinayak Kale
• [PATCH 4/4] arm64: Add initial DTS for APM X-Gene Storm SOC and APM Mustang board   Vinayak Kale
• [PATCH 4/4] arm64: Add initial DTS for APM X-Gene Storm SOC and APM Mustang board   Vinayak Kale
• [PATCH V2 0/4] arm64: Initial patch-set for APM X-Gene SOC family   Vinayak Kale
• [PATCH V2 1/4] arm64: Add Kconfig option for APM X-Gene SOC family   Vinayak Kale
• [PATCH V2 2/4] arm64: Enable APM X-Gene SOC family in the defconfig   Vinayak Kale
• [PATCH V2 3/4] arm64: Add defines for APM ARMv8 implementation   Vinayak Kale
• [PATCH V2 4/4] arm64: Add initial DTS for APM X-Gene Storm SOC and APM Mustang board   Vinayak Kale
• [PATCH V2 4/4] arm64: Add initial DTS for APM X-Gene Storm SOC and APM Mustang board   Vinayak Kale
• [PATCH V2 4/4] arm64: Add initial DTS for APM X-Gene Storm SOC and APM Mustang board   Vinayak Kale
• [PATCH 4/4] arm64: Add initial DTS for APM X-Gene Storm SOC and APM Mustang board   Vinayak Kale
• [PATCH V3 0/4] arm64: Initial patch-set for APM X-Gene SOC family   Vinayak Kale
• [PATCH V3 1/4] arm64: Add Kconfig option for APM X-Gene SOC family   Vinayak Kale
• [PATCH V3 2/4] arm64: Enable APM X-Gene SOC family in the defconfig   Vinayak Kale
• [PATCH V3 3/4] arm64: Add defines for APM ARMv8 implementation   Vinayak Kale
• [PATCH V3 4/4] arm64: Add initial DTS for APM X-Gene Storm SOC and APM Mustang board   Vinayak Kale
• Removal of NWFPE in its entirety, and VFP emulation code   Imre Kaloz
• [GIT PULL 04/10] clk-exynos for v3.10   Sachin Kamat
• [PATCH 3/7] ARM: exynos: add missing properties for combiner IRQs   Sachin Kamat
• [PATCH 3/7] ARM: exynos: add missing properties for combiner IRQs   Sachin Kamat
• [PATCH 3/7] ARM: exynos: add missing properties for combiner IRQs   Sachin Kamat
• [PATCH v3 00/10] ARM: exynos multiplatform series, part 1   Sachin Kamat
• [PATCH v3 00/10] ARM: exynos multiplatform series, part 1   Sachin Kamat
• [PATCH v3] mm: Make snapshotting pages for stable writes a per-bio operation   Jan Kara
• [PATCH v3] [RESEND] mm: Make snapshotting pages for stable writes a per-bio operation   Jan Kara
• [PATCH v3] [RESEND] mm: Make snapshotting pages for stable writes a per-bio operation   Jan Kara
• [PATCH] ARM: EXYNOS5: Fix kernel dump in AFTR idle mode   Chander Kashyap
• [V4 patch 02/15] ARM: ux500: cpuidle: replace for_each_online_cpu by for_each_possible_cpu   Chander Kashyap
• [RFC PATCH 5/6] ARM, mm: change meaning of max_low_pfn to maximum pfn for nobootmem   Joonsoo Kim
• [RFC PATCH 0/6] ARM: use NO_BOOTMEM on default configuration   Joonsoo Kim
• [PATCH v6 0/7] move s3c24xx-irq to drivers/irqchip and add dt support   Kukjin Kim
• [PATCH v6 7/7] irqchip: s3c24xx: add devicetree support   Kukjin Kim
• [PATCH 00/21] Various fixes and extensions to Exynos4 clock driver   Kukjin Kim
• [PATCH 1/2] ARM: S3C64XX: Clear DMA flags on channel request   Kukjin Kim
• [PATCH 2/2] ARM: S3C64XX: Slow down mic detection rate for wm5102   Kukjin Kim
• [PATCH] ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI"   Kukjin Kim
• [PATCH] ARM: S3C64XX: remove obsolete Makefile line   Kukjin Kim
• [PATCH] ARM: Fix typo "CONFIG_SAMSUNG_DEV_RTC"   Kukjin Kim
• [PATCH] ARM: EXYNOS5440: DTS: Add virtual GIC DT bindings   Kukjin Kim
• [PATCH 3/3] ARM: EXYNOS5250: Register architected timers   Kukjin Kim
• [PATCH] ARM: dts: add usb 2.0 clock references to exynos5250 device tree   Kukjin Kim
• [PATCH 0/2] These two patches to s3c_pm_arch_prepare_irqs() were part of the work   Kukjin Kim
• [PATCH 0/2] These two patches to s3c_pm_arch_prepare_irqs() were part of the work   Kukjin Kim
• [PATCH 3/3] ARM: EXYNOS5250: Register architected timers   Kukjin Kim
• [PATCH 00/21] Various fixes and extensions to Exynos4 clock driver   Kukjin Kim
• [PATCH 4/4] ARM: s3c24xx: Fix switching FIFO in arch_enable_uart_fifo function   Kukjin Kim
• [PATCH 1/4] ARM: s3c24xx: Removed unneeded dependency on ARCH_S3C24XX for boards   Kukjin Kim
• [PATCH v2 0/4] clk: samsung: pm fixes and multiple aliases   Kukjin Kim
• [PATCH 0/2] ARM: Exynos: Add DT based I/O mapping for Chip-ID controller   Kukjin Kim
• [PATCH 0/4] ARM: dts: update device tree for exynos5440   Kukjin Kim
• [PATCH 1/4] ARM: dts: Add node for GMAC for exynos5440   Kukjin Kim
• [PATCH 2/4] ARM: dts: add PDMA0 changes for exynos5440   Kukjin Kim
• [PATCH 3/4] ARM: dts: add PMU support in exynos5440   Kukjin Kim
• [PATCH 4/4] ARM: dts: update bootargs to boot from sda2 for exynos5440-ssdk5440   Kukjin Kim
• [PATCH 1/2] ARM: EXYNOS: Add a platform bus notifier to set dma masks for Exynos5440   Kukjin Kim
• [PATCH 2/2] ARM: EXYNOS: force mac ip to 32bit dma   Kukjin Kim
• [PATCH RESEND] ARM: SAMSUNG: dma: Remove unnecessary code   Kukjin Kim
• [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq   Kukjin Kim
• linux-next: manual merge of the samsung tree with the arm-soc tree   Kukjin Kim
• [PATCH] clk: exynos4: export clocks required for fimc-is   Kukjin Kim
• [PATCH] ARM: dts: add device tree file for SD5v1 board   Kukjin Kim
• [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq   Kukjin Kim
• [PATCH] ARM: S3C24XX: Correct NR_IRQS definition for s3c2440   Kukjin Kim
• [PATCH] ARM: Samsung: Select ARM_CPU_SUSPEND when required   Kukjin Kim
• [PATCH] ARM: S3C24XX: Remove unused GPIO drive strength register definitions   Kukjin Kim
• [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq   Kukjin Kim
• [PATCH V5 0/4] cpufreq: exynos5440: support for cpufreq driver   Kukjin Kim
• [GIT PULL 0/10] Samsung stuff for v3.10   Kukjin Kim
• [GIT PULL 01/10] cleanup-samsung for v3.10   Kukjin Kim
• [GIT PULL 02/10] 2nd irq-s3c24xx for v3.10   Kukjin Kim
• [GIT PULL 03/10] mct-exynos for v3.10   Kukjin Kim
• [GIT PULL 04/10] clk-exynos for v3.10   Kukjin Kim
• [GIT PULL 05/10] dt-exynos for v3.10   Kukjin Kim
• [GIT PULL 06/10] 2nd pinctrl-exynos for v3.10   Kukjin Kim
• [GIT PULL 07/10] pmu-exynos for v3.10   Kukjin Kim
• [GIT PULL 08/10] secure-exynos for v3.10   Kukjin Kim
• [GIT PULL 09/10] 2nd timer-samsung for v3.10   Kukjin Kim
• [GIT PULL 10/10] devel-samsung for v3.10   Kukjin Kim
• [PATCH] ARM: EXYNOS: remove "config EXYNOS_DEV_DRM"   Kukjin Kim
• [PATCH] ARM: dts: fix bad merge of display timing node to exynos5250-smdk5250.dts   Kukjin Kim
• [PATCH] ARM: dts: Disable the RTC by default on exynos5   Kukjin Kim
• [PATCH] ARM: dts: fix bad merge of display timing node to exynos5250-smdk5250.dts   Kukjin Kim
• GENERIC_GPIO considered deprecated   Kukjin Kim
• [GIT PULL 10/10] devel-samsung for v3.10   Kukjin Kim
• [PATCH] ARM: EXYNOS: no more support non-DT for EXYNOS SoCs   Kukjin Kim
• [GIT PULL 06/10] 2nd pinctrl-exynos for v3.10   Kukjin Kim
• [PATCH 3/3] ARM: dts: list the interrupts generated by pin-controller on Exynos5440   Kukjin Kim
• [PATCH] ARM: S3C24XX: Fix interrupt pending register offset of the EINT controller   Kukjin Kim
• [PATCH] ARM: EXYNOS: no more support non-DT for EXYNOS SoCs   Kukjin Kim
• [GIT PULL] Samsung fixes-2 for v3.9   Kukjin Kim
• [GIT PULL v2 10/10] devel-samsung for v3.10   Kukjin Kim
• [GIT PULL 10/10] devel-samsung for v3.10   Kukjin Kim
• [GIT PULL] Samsung fixes-2 for v3.9   Kukjin Kim
• linux-next: manual merge of the arm-soc tree with the pm tree   Kukjin Kim
• [GIT PULL 04/10] clk-exynos for v3.10   Kukjin Kim
• [GIT PULL 0/10] Samsung stuff for v3.10   Kukjin Kim
• [PATCH] pinctrl: Add pinctrl-s3c24xx driver   Kukjin Kim
• [PATCH v2 0/3] ARM: S3C24XX: Add devicetree support for s3c2416   Kukjin Kim
• [PATCH RESEND] ARM: EXYNOS: no more support non-DT for EXYNOS SoCs   Kukjin Kim
• [PATCH v5 2/3] ARM: dts: Add i2c-arbitrator bus for exynos5250-snow   Kukjin Kim
• [GIT PULL v2 1/4] cleanup-samsung v2 for v3.10   Kukjin Kim
• [GIT PULL v2 2/4] dt-exynos v2 for v3.10   Kukjin Kim
• [GIT PULL v2 3/4] mct-exynos v2 for v3.10   Kukjin Kim
• [GIT PULL 4/4] dt-exynos 2 for v3.10   Kukjin Kim
• [PATCH RESEND] ARM: EXYNOS: no more support non-DT for EXYNOS SoCs   Kukjin Kim
• [PATCH v5 2/3] ARM: dts: Add i2c-arbitrator bus for exynos5250-snow   Kukjin Kim
• [GIT PULL] Timer clean-ups for 3.10, Part 2   Kukjin Kim
• linux-next: manual merge of the arm-soc tree with the pm tree   Kukjin Kim
• [PATCH v3 00/10] ARM: exynos multiplatform series, part 1   Kukjin Kim
• [PATCH v2 0/2] ARM: Exynos: Add DT based I/O mapping for Chip-ID controller   Kukjin Kim
• [PATCH 0/2] ARM: Exynos: Add DT based I/O mapping for Chip-ID controller   Kukjin Kim
• [PATCH 0/3] ARM: S3C24XX: dma cleanups for s3c2412 and s3c2443   Kukjin Kim
• [PATCH] clocksource: add samsung pwm timer driver   Kukjin Kim
• [PATCH RESEND] ARM: EXYNOS: no more support non-DT for EXYNOS SoCs   Kukjin Kim
• [PATCH v5 00/14] ARM: samsung-time: Prepare for multiplatform support   Kukjin Kim
• [PATCH v2 0/3] ARM: EXYNOS: DT-enabled support for Universal C210   Kukjin Kim
• [PATCH v2 2/3] ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC   Kukjin Kim
• [PATCH RESEND] ARM: EXYNOS: no more support non-DT for EXYNOS SoCs   Kukjin Kim
• [PATCH v5 5/6] ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs   Kukjin Kim
• [PATCH v5 3/6] gpio: samsung: Skip legacy GPIO registration if pinctrl-s3c64xx is present   Kukjin Kim
• [PATCH v5 5/6] ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs   Kukjin Kim
• [PATCH v2 2/3] ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC   Kukjin Kim
• [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq   Kukjin Kim
• [GIT PULL] Late Exynos stuff for v3.10   Kukjin Kim
• [GIT PULL] Late Exynos stuff for v3.10   Kukjin Kim
• [PATCH 1/2] ARM: s3c64xx: cpuidle: use init/exit common routine   Kukjin Kim
• Exynos regressions w.r.t. config and debuggability due to multiplatform   Kukjin Kim
• [GIT PULL] Late Exynos stuff for v3.10   Kukjin Kim
• [PATCH v3 00/13] ARM: EXYNOS: Fix Universal C210 support   Kukjin Kim
• linux-next: manual merge of the arm-soc tree with the pm tree   Kukjin Kim
• [GIT PULL] Samsung fixes-1 for v3.10   Kukjin Kim
• [GIT PULL] Late Samsung stuff (v3) for v3.10   Kukjin Kim
• [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq   Kukjin Kim
• [PATCH] ARM: exynos: dts: cros5250: add EC device   Kukjin Kim
• [GIT PULL] Samsung fixes-1 for v3.10   Kukjin Kim
• [PATCH v3 00/13] ARM: EXYNOS: Fix Universal C210 support   Kukjin Kim
• [PATCH] ARM: exynos: dts: cros5250: add cyapa trackpad   Kukjin Kim
• [GIT PULL] Late Samsung stuff (v3) for v3.10   Kukjin Kim
• [PATCH] clk: add LP8788 clock driver   Kim, Milo
• [PATCH v2] clk: add LP8788 clock driver   Kim, Milo
• [PATCH] cpufreq: dbx500: Round to closest available freq   Troy Kisky
• [PATCH] ARM: tegra: Add charger subnode to tps65090 node   Rhyland Klein
• [PATCH] ARM: tegra: Add charger subnode to tps65090 node   Rhyland Klein
• [PATCH] ARM: tegra: Add charger subnode to tps65090 node   Rhyland Klein
• [PATCH 0/2] mmc: mxs-mmc: add cd-inverted and non-removeable   Marc Kleine-Budde
• [PATCH 2/2] mmc: mxs-mmc: add non-removeable property   Marc Kleine-Budde
• mmc: mxs-mmc: add non-removeable property   Marc Kleine-Budde
• mmc: mxs-mmc: add non-removeable property   Marc Kleine-Budde
• BUG: Re: [PATCH v2 3/3] clocksource: use clockevents_config_and_register() where possible   Marc Kleine-Budde
• RFC: [PATCH] clocksource: tcb: fix min_delta calculation   Marc Kleine-Budde
• RFC: [PATCH] clocksource: tcb: fix min_delta calculation   Marc Kleine-Budde
• RFC: [PATCH] clocksource: tcb: fix min_delta calculation   Marc Kleine-Budde
• RFC: [PATCH] clocksource: tcb: fix min_delta calculation   Marc Kleine-Budde
• RFC: [PATCH] clocksource: tcb: fix min_delta calculation   Marc Kleine-Budde
• [PATCH] i2c: s3c2410: Add SMBus emulation for block read   Uwe Kleine-König
• [PATCH v3] irqchip: Add support for ARMv7-M's NVIC   Uwe Kleine-König
• [PATCH v11 0/3] Another round of ARMv7-M patches   Uwe Kleine-König
• [PATCH v11 1/3] ARM: Add base support for ARMv7-M   Uwe Kleine-König
• [PATCH v11 2/3] ARM: ARMv7-M: Add support for exception handling   Uwe Kleine-König
• [PATCH v11 3/3] ARM: ARMv7-M: Allow the building of new kernel port   Uwe Kleine-König
• [PATCH v11 0/3] Another round of ARMv7-M patches   Uwe Kleine-König
• [PATCH v11 0/3] Another round of ARMv7-M patches   Uwe Kleine-König
• [PATCH v11 1/3] ARM: Add base support for ARMv7-M   Uwe Kleine-König
• [PATCH v3] irqchip: Add support for ARMv7-M's NVIC   Uwe Kleine-König
• [PATCHv2 2/3] ARM: Detect support for SDIV/UDIV from ISAR0 register   Uwe Kleine-König
• [PATCH v3] irqchip: Add support for ARMv7-M's NVIC   Uwe Kleine-König
• [PATCH v3] irqchip: Add support for ARMv7-M's NVIC   Uwe Kleine-König
• [PATCH v3] irqchip: Add support for ARMv7-M's NVIC   Uwe Kleine-König
• [PATCH v3] irqchip: Add support for ARMv7-M's NVIC   Uwe Kleine-König
• [PATCH] module: fix mutiple defined issue   Uwe Kleine-König
• [PATCH 2/5] clk: notifier handler for dynamic voltage scaling   Taras Kondratiuk
• [PATCH 1/3] ARM: OMAP2+: Legacy support for wl12xx when booted with devicetree   Koen Kooi
• [PATCH v2 RESEND] ARM: OMAP1: fix omap_udc registration   Aaro Koskinen
• [PATCH] ARM: OMAP: RX-51: add missing regulator supply definitions for lis3lv02d   Aaro Koskinen
• Removal of NWFPE in its entirety, and VFP emulation code   Aaro Koskinen
• [PATCH V2] DMA: PL330: Add check if device tree compatible   Vinod Koul
• [PATCH V3 2/2] dmaengine: OMAP: Register SDMA controller with Device Tree DMA driver   Vinod Koul
• [PATCH V3] DMA: PL330: Add check if device tree compatible   Vinod Koul
• [PATCH 1/2] dmaengine: add const for name parameter   Vinod Koul
• [RFC v2] dmaengine: omap-dma: Start DMA without delay for cyclic channels   Vinod Koul
• [PATCH] dmaengine: at_hdmac: fix race condition in atc_advance_work()   Vinod Koul
• [PATCH 02/32] dmaengine: ste_dma40: Move default memcpy configs into the driver   Vinod Koul
• [PATCH 01/32] dmaengine: ste_dma40: Assign memcpy channels in the driver   Vinod Koul
• [PATCH 13/32] dmaengine: ste_dma40: Calculate number of logical channels from physical ones   Vinod Koul
• [PATCH 17/32] dmaengine: ste_dma40: Remove redundant argument from d40_phy_cfg()   Vinod Koul
• [PATCH 21/32] dmaengine: ste_dma40: Also report the number of logical channels   Vinod Koul
• [PATCH 19/32] dmaengine: ste_dma40: Move more setup into the configuration routines   Vinod Koul
• [PATCH 22/32] dmaengine: ste_dma40: Allocate plat_data on declaration   Vinod Koul
• [PATCH 22/32] dmaengine: ste_dma40: Allocate plat_data on declaration   Vinod Koul
• [PATCH 20/32] dmaengine: ste_dma40: Move rev error-check up to revision acquisition   Vinod Koul
• [PATCH 05/32] dmaengine: ste_dma40: Supply macros to resolve 'src' and 'dst' directions   Vinod Koul
• [PATCH 14/32] dmaengine: ste_dma40: Remove 'always true' checking   Vinod Koul
• [PATCH 21/32] dmaengine: ste_dma40: Also report the number of logical channels   Vinod Koul
• [PATCH 15/32] dmaengine: ste_dma40: Separate Logical Global Interrupt Mask (GIM) unmasking   Vinod Koul
• [PATCH 16/32] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()   Vinod Koul
• [PATCH 23/32] dmaengine: ste_dma40: Allow driver to be probe()able when DT is enabled   Vinod Koul
• [PATCH 08/32] dmaengine: ste_dma40: Optimise local MAX() macro   Vinod Koul
• [PATCH 03/32 v2] dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s   Vinod Koul
• [PATCH 24/32] dmaengine: ste_dma40: Supply full Device Tree parsing support   Vinod Koul
• [PATCH 24/32 v2] dmaengine: ste_dma40: Supply full Device Tree parsing support   Vinod Koul
• [PATCH 24/32 v3] dmaengine: ste_dma40: Supply full Device Tree parsing support   Vinod Koul
• [PATCH 05/32] dmaengine: ste_dma40: Supply macros to resolve 'src' and 'dst' directions   Vinod Koul
• [PATCH 21/32] dmaengine: ste_dma40: Also report the number of logical channels   Vinod Koul
• [PATCH 18/23] dma: coh901318: add devicetree support   Vinod Koul
• [PATCH v3 1/6] at_hdmac: move to generic DMA binding   Vinod Koul
• [PATCH 6/9] crypto: ux500/cryp - Set DMA configuration though dma_slave_config()   Vinod Koul
• [PATCH v3 1/6] at_hdmac: move to generic DMA binding   Vinod Koul
• [PATCH 6/9] crypto: ux500/cryp - Set DMA configuration though dma_slave_config()   Vinod Koul
• [PATCH v2 2/2] dma: imx-sdma: move to generic device tree bindings   Vinod Koul
• [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10   Tero Kristo
• [PATCH 0/7] i.MX53 IPU + TVE patches   Greg Kroah-Hartman
• [PATCH 0/7] i.MX53 IPU + TVE patches   Greg Kroah-Hartman
• [PATCH 10/30] usb: exynos: do not include plat/usb-phy.h   Greg Kroah-Hartman
• [PATCH v2 0/7] pcmcia: at91_cf: clean up and add DT support   Greg Kroah-Hartman
• [PATCH] usb: phy: phy core cannot yet be a module   Greg Kroah-Hartman
• [PATCH 18/21] usb: phy: tegra: don't call into tegra-ehci directly   Greg Kroah-Hartman
• [PATCH 19/21] usb: phy: don't mark usb_bind_phy as __init   Greg Kroah-Hartman
• [PATCH 14/21] staging: nvec: allow modular build   Greg Kroah-Hartman
• [PATCH 18/21] USB: ehci-msm: USB_MSM_OTG needs USB_PHY   Greg Kroah-Hartman
• [PATCH 1/7] tty: xuartps: Sort #includes alphabetically   Greg Kroah-Hartman
• [PATCH 1/7] tty: xuartps: Sort #includes alphabetically   Greg Kroah-Hartman
• [PATCH RESEND] i2c: s3c2410: Add SMBus emulation for block read   Prasanna Kumar
• [PATCH 5/9] cpufreq: Notify all policy->cpus in cpufreq_notify_transition()   Viresh Kumar
• [PATCH 01/18] cpufreq: ARM: Arrange drivers in alphabetical order   Viresh Kumar
• [PATCH 02/18] cpufreq: tegra: Move driver to drivers/cpufreq   Viresh Kumar
• [PATCH 03/18] cpufreq: davinci: move cpufreq driver to drivers/cpufreq   Viresh Kumar
• [PATCH 04/18] cpufreq: pxa3xx: move cpufreq driver to drivers/cpufreq   Viresh Kumar
• [PATCH 05/18] cpufreq: pxa2xx: move cpufreq driver to drivers/cpufreq   Viresh Kumar
• [PATCH 06/18] cpufreq: integrator: move cpufreq driver to drivers/cpufreq   Viresh Kumar
• [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq   Viresh Kumar
• [PATCH 08/18] cpufreq: sa11x0: move cpufreq driver to drivers/cpufreq   Viresh Kumar
• [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq   Viresh Kumar
• [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq   Viresh Kumar
• [PATCH V6 1/4] cpufreq: exynos: Add cpufreq driver for exynos5440   Viresh Kumar
• [PATCH V6 1/4] cpufreq: exynos: Add cpufreq driver for exynos5440   Viresh Kumar
• [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq   Viresh Kumar
• [PATCH V6 0/4] cpufreq: exynos5440: support for cpufreq driver   Viresh Kumar
• [PATCH 2/3] CLK: uninline clk_prepare_enable() and clk_disable_unprepare()   Viresh Kumar
• [PATCH V2] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Viresh Kumar
• [RFC PATCH v2 10/13] ARM: mach-spear: cpus/cpu nodes dts updates   Viresh Kumar
• [PATCH 13/21] misc: mark spear13xx-pcie-gadget as broken   Viresh Kumar
• [PATCH] cpuidle: add maintainer entry   Viresh Kumar
• [PATCH 0/5] CPUFreq: ARM big LITTLE Fixes   Viresh Kumar
• [PATCH 1/5] cpufreq: ARM big LITTLE: Select PM_OPP   Viresh Kumar
• [PATCH 2/5] cpufreq: ARM big LITTLE DT: Return correct transition latency   Viresh Kumar
• [PATCH 3/5] cpufreq: ARM big LITTLE DT: Return CPUFREQ_ETERNAL if clock-latency isn't found   Viresh Kumar
• [PATCH 4/5] cpufreq: ARM big LITTLE: Move cpu_to_cluster() to arm_big_little.h   Viresh Kumar
• [PATCH 5/5] cpufreq: ARM big LITTLE: Improve print message   Viresh Kumar
• [Query] PM runtime API   Prabhakar Lad
• [Query] PM runtime API   Prabhakar Lad
• [BUG] mod/file2alias: build error in devicetable-offsets.c [was: asm/types.h Header file wont get generated while building uImage ?]   Prabhakar Lad
• Query on pinctrl usage for DT nodes   Prabhakar Lad
• [PATCH v8 1/2] ARM: davinci: dm365: add support for v4l2 video display   Prabhakar Lad
• [PATCH v2 1/3] media: davinci: vpss: enable vpss clocks   Prabhakar Lad
• Query on pinctrl usage for DT nodes   Prabhakar Lad
• [PATCH v3 2/3] media: davinci: vpbe: venc: move the enabling of vpss clocks to driver   Prabhakar Lad
• [PATCH v9 1/2] ARM: davinci: dm365: add support for v4l2 video display   Prabhakar Lad
• [BUG] mod/file2alias: build error in devicetable-offsets.c [was: asm/types.h Header file wont get generated while building uImage ?]   Prabhakar Lad
• [PATCH] kbuild: generate generic headers before recursing into scripts   Prabhakar Lad
• Query on pinctrl usage for DT nodes   Prabhakar Lad
• [GIT PULL FOR v3.10] DaVinci media cleanups + Updates   Prabhakar Lad
• [GIT PULL FOR v3.10] DaVinci media cleanups + Updates   Prabhakar Lad
• [PATCH] ARM: daVinci: dm644x/dm355/dm365: replace V4L2_STD_525_60/625_50 with V4L2_STD_NTSC/PAL   Prabhakar Lad
• [GIT PULL FOR v3.10] DaVinci media cleanups + Updates   Prabhakar Lad
• Query on pinctrl usage for DT nodes   Prabhakar Lad
• Query on pinctrl usage for DT nodes   Prabhakar Lad
• [PATCH 0/6] Davinci fbdev driver and enable it for DMx platform   Prabhakar Lad
• [PATCH 1/6] media: davinci: vpbe: fix checkpatch warning for CamelCase   Prabhakar Lad
• [PATCH 2/6] media: davinci: vpbe: enable vpbe for fbdev addition   Prabhakar Lad
• [PATCH 3/6] davinci: vpbe: add fbdev driver   Prabhakar Lad
• [PATCH 4/6] ARM: davinci: dm355: enable fbdev driver   Prabhakar Lad
• [PATCH 5/6] ARM: davinci: dm365: enable fbdev driver   Prabhakar Lad
• [PATCH 6/6] ARM: davinci: dm644x: enable fbdev driver   Prabhakar Lad
• [PATCH 0/6] Davinci fbdev driver and enable it for DMx platform   Prabhakar Lad
• [PATCH 05/21] atm: he: use mdelay instead of large udelay constants   David Laight
• [PATCH 1/3] mailbox: rename pl320-ipc specific mailbox.h   Mark Langsdorf
• [RFC 3/3] mailbox: pl320: Introduce common API driver   Mark Langsdorf
• [PATCH V2] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Francesco Lavra
• [Linaro-mm-sig] [RFC/PATCH v2 2/2] drivers: dma-contiguous: add initialization from device tree   Francesco Lavra
• [PATCH 10/14] sched: update the buddy CPU   Francesco Lavra
• [PATCH v1] ARM: keep __my_cpu_offset consistent with generic one   Ming Lei
• [Question] flush_dcache_page() need to flush icache?   Ming Lei
• [Question] flush_dcache_page() need to flush icache?   Ming Lei
• [PATCH 6/7] ARM: KVM: switch to a dual-step HYP init code   Geoff Levand
• [PATCH 6/7] ARM: KVM: switch to a dual-step HYP init code   Geoff Levand
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Geoff Levand
• How to facilitate the cpuidle drivers to go to the same direction (Was: Re: [PATCH 4/9] ARM: OMAP4: cpuidle: fix wrong driver initialization)   Daniel Lezcano
• [PATCH 1/9] ARM: cpuidle: remove useless declaration   Daniel Lezcano
• [PATCH 1/9] ARM: cpuidle: remove useless declaration   Daniel Lezcano
• [PATCH 5/9] ARM: tegra2: cpuidle: change driver initialization   Daniel Lezcano
• [PATCH 5/9] ARM: tegra2: cpuidle: change driver initialization   Daniel Lezcano
• [PATCH 1/9] ARM: cpuidle: remove useless declaration   Daniel Lezcano
• [PATCH 2/9] ARM: shmobile: pm: fix init sections   Daniel Lezcano
• [PATCH 3/9] ARM: shmobile: cpuidle: remove useless WFI function   Daniel Lezcano
• [PATCH 4/9] ARM: tegra2: cpuidle: change driver initialization   Daniel Lezcano
• [PATCH 5/9] ARM: tegra: cpuidle: remove useless initialization   Daniel Lezcano
• [PATCH 6/9] ARM: davinci: cpuidle: fix wrong enter function   Daniel Lezcano
• [PATCH 7/9] intel: cpuidle: remove stop/start critical timings   Daniel Lezcano
• [PATCH 8/9] ARM: omap3: cpuidle: enable time keeping   Daniel Lezcano
• [PATCH 9/9] POWERPC: pseries: cpuidle: use time keeping flag   Daniel Lezcano
• [PATCH 1/9] ARM: cpuidle: remove useless declaration   Daniel Lezcano
• [PATCH 9/9] POWERPC: pseries: cpuidle: use time keeping flag   Daniel Lezcano
• [PATCH 8/9] ARM: omap3: cpuidle: enable time keeping   Daniel Lezcano
• [PATCH v2 12/13] ARM: move sp804 and integrator timers to drivers/clocksource   Daniel Lezcano
• [PATCH 7/9] intel: cpuidle: remove stop/start critical timings   Daniel Lezcano
• [PATCH 7/9] intel: cpuidle: remove stop/start critical timings   Daniel Lezcano
• [PATCH 7/9] intel: cpuidle: remove stop/start critical timings   Daniel Lezcano
• [PATCH 1/9] ARM: cpuidle: remove useless declaration   Daniel Lezcano
• [GIT PULL 2/5] omap pm clean-up for v3.10 merge window   Daniel Lezcano
• [GIT PULL 2/5] omap pm clean-up for v3.10 merge window   Daniel Lezcano
• [PATCH 00/18] cpuidle: code consolidation   Daniel Lezcano
• [PATCH 01/18] ARM: OMAP3: remove cpuidle_wrap_enter   Daniel Lezcano
• [PATCH 02/18] cpuidle: remove en_core_tk_irqen flag   Daniel Lezcano
• [PATCH 03/18] ARM: ux500: cpuidle: replace for_each_online_cpu by for_each_possible_cpu   Daniel Lezcano
• [PATCH 04/18] ARM: imx: cpuidle: create separate drivers for imx5/imx6   Daniel Lezcano
• [PATCH 05/18] cpuidle: make a single register function for all   Daniel Lezcano
• [PATCH 06/18] ARM: ux500: cpuidle: use init/exit common routine   Daniel Lezcano
• [PATCH 07/18] ARM: at91: cpuidle: use init/exit common routine   Daniel Lezcano
• [PATCH 08/18] ARM: OMAP3: cpuidle: use init/exit common routine   Daniel Lezcano
• [PATCH 09/18] ARM: s3c64xx: cpuidle: use init/exit common routine   Daniel Lezcano
• [PATCH 10/18] ARM: tegra1: cpuidle: use init/exit common routine   Daniel Lezcano
• [PATCH 11/18] ARM: shmobile: cpuidle: use init/exit common routine   Daniel Lezcano
• [PATCH 12/18] ARM: OMAP4: cpuidle: use init/exit common routine   Daniel Lezcano
• [PATCH 13/18] ARM: tegra2: cpuidle: use init/exit common routine   Daniel Lezcano
• [PATCH 14/18] ARM: tegra3: cpuidle: use init/exit common routine   Daniel Lezcano
• [PATCH 15/18] ARM: calxeda: cpuidle: use init/exit common routine   Daniel Lezcano
• [PATCH 16/18] ARM: kirkwood: cpuidle: use init/exit common routine   Daniel Lezcano
• [PATCH 17/18] ARM: davinci: cpuidle: use init/exit common routine   Daniel Lezcano
• [PATCH 18/18] ARM: imx: cpuidle: use init/exit common routine   Daniel Lezcano
• [PATCH 05/18] cpuidle: make a single register function for all   Daniel Lezcano
• [PATCH 05/18] cpuidle: make a single register function for all   Daniel Lezcano
• [PATCH 05/18] cpuidle: make a single register function for all   Daniel Lezcano
• [PATCH 10/18] ARM: tegra1: cpuidle: use init/exit common routine   Daniel Lezcano
• [PATCH 05/18] cpuidle: make a single register function for all   Daniel Lezcano
• [PATCH 05/18] cpuidle: make a single register function for all   Daniel Lezcano
• [PATCH 00/18] cpuidle: code consolidation   Daniel Lezcano
• [PATCH 05/18] cpuidle: make a single register function for all   Daniel Lezcano
• [PATCH] ARM: shmobile: r8a7740: Add Suspend-To-RAM modes and CPUIdle   Daniel Lezcano
• [PATCH 13/18] ARM: tegra2: cpuidle: use init/exit common routine   Daniel Lezcano
• [PATCH] ARM: shmobile: r8a7740: Add Suspend-To-RAM modes and CPUIdle   Daniel Lezcano
• [PATCH v2 2/2] ARM: shmobile: r8a7740: Add CPUIdle   Daniel Lezcano
• [V2 patch 00/19] cpuidle: code consolidation   Daniel Lezcano
• [V2 patch 01/19] ARM: shmobile: cpuidle: remove shmobile_enter_wfi function   Daniel Lezcano
• [V2 patch 02/19] ARM: OMAP3: remove cpuidle_wrap_enter   Daniel Lezcano
• [V2 patch 03/19] cpuidle: remove en_core_tk_irqen flag   Daniel Lezcano
• [V2 patch 04/19] ARM: ux500: cpuidle: replace for_each_online_cpu by for_each_possible_cpu   Daniel Lezcano
• [V2 patch 05/19] ARM: imx: cpuidle: create separate drivers for imx5/imx6   Daniel Lezcano
• [V2 patch 06/19] cpuidle: make a single register function for all   Daniel Lezcano
• [V2 patch 07/19] ARM: ux500: cpuidle: use init/exit common routine   Daniel Lezcano
• [V2 patch 08/19] ARM: at91: cpuidle: use init/exit common routine   Daniel Lezcano
• [V2 patch 09/19] ARM: OMAP3: cpuidle: use init/exit common routine   Daniel Lezcano
• [V2 patch 10/19] ARM: s3c64xx: cpuidle: use init/exit common routine   Daniel Lezcano
• [V2 patch 11/19] ARM: tegra: cpuidle: use init/exit common routine   Daniel Lezcano
• [V2 patch 12/19] ARM: shmobile: cpuidle: use init/exit common routine   Daniel Lezcano
• [V2 patch 13/19] ARM: OMAP4: cpuidle: use init/exit common routine   Daniel Lezcano
• [V2 patch 14/19] ARM: tegra: cpuidle: use init/exit common routine for tegra2   Daniel Lezcano
• [V2 patch 15/19] ARM: tegra: cpuidle: use init/exit common routine for tegra3   Daniel Lezcano
• [V2 patch 16/19] ARM: calxeda: cpuidle: use init/exit common routine   Daniel Lezcano
• [V2 patch 17/19] ARM: kirkwood: cpuidle: use init/exit common routine   Daniel Lezcano
• [V2 patch 18/19] ARM: davinci: cpuidle: use init/exit common routine   Daniel Lezcano
• [V2 patch 19/19] ARM: imx: cpuidle: use init/exit common routine   Daniel Lezcano
• [V2 patch 01/19] ARM: shmobile: cpuidle: remove shmobile_enter_wfi function   Daniel Lezcano
• [PATCH 04/18] ARM: imx: cpuidle: create separate drivers for imx5/imx6   Daniel Lezcano
• [V2 patch 01/19] ARM: shmobile: cpuidle: remove shmobile_enter_wfi function   Daniel Lezcano
• [PATCH 04/18] ARM: imx: cpuidle: create separate drivers for imx5/imx6   Daniel Lezcano
• [V3 patch 00/19] cpuidle: code consolidation   Daniel Lezcano
• [V3 patch 01/19] ARM: shmobile: cpuidle: remove shmobile_enter_wfi function   Daniel Lezcano
• [V3 patch 02/19] ARM: shmobile: cpuidle: remove shmobile_enter_wfi prototype   Daniel Lezcano
• [V3 patch 03/19] ARM: OMAP3: remove cpuidle_wrap_enter   Daniel Lezcano
• [V3 patch 04/19] cpuidle: remove en_core_tk_irqen flag   Daniel Lezcano
• [V3 patch 05/19] ARM: ux500: cpuidle: replace for_each_online_cpu by for_each_possible_cpu   Daniel Lezcano
• [V3 patch 06/19] cpuidle: make a single register function for all   Daniel Lezcano
• [V3 patch 07/19] ARM: ux500: cpuidle: use init/exit common routine   Daniel Lezcano
• [V3 patch 08/19] ARM: at91: cpuidle: use init/exit common routine   Daniel Lezcano
• [V3 patch 09/19] ARM: OMAP3: cpuidle: use init/exit common routine   Daniel Lezcano
• [V3 patch 10/19] ARM: s3c64xx: cpuidle: use init/exit common routine   Daniel Lezcano
• [V3 patch 11/19] ARM: tegra: cpuidle: use init/exit common routine   Daniel Lezcano
• [V3 patch 12/19] ARM: shmobile: cpuidle: use init/exit common routine   Daniel Lezcano
• [V3 patch 13/19] ARM: OMAP4: cpuidle: use init/exit common routine   Daniel Lezcano
• [V3 patch 14/19] ARM: tegra: cpuidle: use init/exit common routine for tegra2   Daniel Lezcano
• [V3 patch 15/19] ARM: tegra: cpuidle: use init/exit common routine for tegra3   Daniel Lezcano
• [V3 patch 16/19] ARM: calxeda: cpuidle: use init/exit common routine   Daniel Lezcano
• [V3 patch 17/19] ARM: kirkwood: cpuidle: use init/exit common routine   Daniel Lezcano
• [V3 patch 18/19] ARM: davinci: cpuidle: use init/exit common routine   Daniel Lezcano
• [V3 patch 19/19] ARM: imx: cpuidle: use init/exit common routine   Daniel Lezcano
• [V3 patch 17/19] ARM: kirkwood: cpuidle: use init/exit common routine   Daniel Lezcano
• [RFC patch 0/2] ARM: at91: cpuidle: move driver to drivers/cpuidle   Daniel Lezcano
• [RFC patch 1/2] ARM: at91: cpuidle: encapsulate the standby code   Daniel Lezcano
• [RFC patch 2/2] ARM: at91: cpuidle: move the driver to drivers/cpuidle directory   Daniel Lezcano
• [RFC patch 1/2] ARM: at91: cpuidle: encapsulate the standby code   Daniel Lezcano
• [RFC patch 2/2] ARM: at91: cpuidle: move the driver to drivers/cpuidle directory   Daniel Lezcano
• [RFC patch 2/2] ARM: at91: cpuidle: move the driver to drivers/cpuidle directory   Daniel Lezcano
• [V3 patch 00/19] cpuidle: code consolidation   Daniel Lezcano
• [RFC patch 2/2] ARM: at91: cpuidle: move the driver to drivers/cpuidle directory   Daniel Lezcano
• [V3 patch 19/19] ARM: imx: cpuidle: use init/exit common routine   Daniel Lezcano
• [V3 patch 06/19] cpuidle: make a single register function for all   Daniel Lezcano
• [V3 patch 19/19] ARM: imx: cpuidle: use init/exit common routine   Daniel Lezcano
• [V3 patch 02/19] ARM: shmobile: cpuidle: remove shmobile_enter_wfi prototype   Daniel Lezcano
• [PATCH 1/9] ARM: cpuidle: remove useless declaration   Daniel Lezcano
• [PATCH 18/19] ARM: at91: suspend both memory controllers on at91sam9263   Daniel Lezcano
• [PATCH 1/9] ARM: cpuidle: remove useless declaration   Daniel Lezcano
• [V3 patch 10/19] ARM: s3c64xx: cpuidle: use init/exit common routine   Daniel Lezcano
• [PATCH 05/18] cpuidle: make a single register function for all   Daniel Lezcano
• [V3 patch 17/19] ARM: kirkwood: cpuidle: use init/exit common routine   Daniel Lezcano
• [V3 patch 17/19] ARM: kirkwood: cpuidle: use init/exit common routine   Daniel Lezcano
• [V4 patch 00/15] cpuidle: code consolidation   Daniel Lezcano
• [V4 patch 01/15] cpuidle: remove en_core_tk_irqen flag   Daniel Lezcano
• [V4 patch 02/15] ARM: ux500: cpuidle: replace for_each_online_cpu by for_each_possible_cpu   Daniel Lezcano
• [V4 patch 03/15] cpuidle: make a single register function for all   Daniel Lezcano
• [V4 patch 04/15] ARM: ux500: cpuidle: use init/exit common routine   Daniel Lezcano
• [V4 patch 05/15] ARM: at91: cpuidle: use init/exit common routine   Daniel Lezcano
• [V4 patch 06/15] ARM: OMAP3: cpuidle: use init/exit common routine   Daniel Lezcano
• [V4 patch 07/15] ARM: tegra: cpuidle: use init/exit common routine   Daniel Lezcano
• [V4 patch 08/15] ARM: shmobile: cpuidle: use init/exit common routine   Daniel Lezcano
• [V4 patch 09/15] ARM: OMAP4: cpuidle: use init/exit common routine   Daniel Lezcano
• [V4 patch 10/15] ARM: tegra: cpuidle: use init/exit common routine for tegra2   Daniel Lezcano
• [V4 patch 11/15] ARM: tegra: cpuidle: use init/exit common routine for tegra3   Daniel Lezcano
• [V4 patch 12/15] ARM: calxeda: cpuidle: use init/exit common routine   Daniel Lezcano
• [V4 patch 13/15] ARM: kirkwood: cpuidle: use init/exit common routine   Daniel Lezcano
• [V4 patch 14/15] ARM: davinci: cpuidle: use init/exit common routine   Daniel Lezcano
• [V4 patch 15/15] ARM: imx: cpuidle: use init/exit common routine   Daniel Lezcano
• [V4 patch 03/15] cpuidle: make a single register function for all   Daniel Lezcano
• [V3 patch 06/19] cpuidle: make a single register function for all   Daniel Lezcano
• [V3 patch 06/19] cpuidle: make a single register function for all   Daniel Lezcano
• [V3 patch 06/19] cpuidle: make a single register function for all   Daniel Lezcano
• [PATCH 07/21] ARM: tegra: unify tegra_idle_device definitions   Daniel Lezcano
• [PATCH 07/21] ARM: tegra: unify tegra_idle_device definitions   Daniel Lezcano
• [PATCH] cpuidle: add maintainer entry   Daniel Lezcano
• [PATCH] cpuidle: add maintainer entry   Daniel Lezcano
• [PATCH] cpuidle: add maintainer entry   Daniel Lezcano
• [PATCH 1/2] ARM: s3c64xx: cpuidle: use init/exit common routine   Daniel Lezcano
• [PATCH] cpuidle: add maintainer entry   Daniel Lezcano
• [PATCH] cpuidle: add maintainer entry   Daniel Lezcano
• [V2 PATCH] cpuidle: add maintainer entry   Daniel Lezcano
• [PATCH/RFC 0/2] ARM: shmobile: DT irqpin for r8a7779 and marzen-reference   Guennadi Liakhovetski
• [PATCH/RFC 1/2] irqchip: renesas-intc-irqpin: DT binding for sense bitfield width   Guennadi Liakhovetski
• [PATCH/RFC 2/2] ARM: shmobile: marzen-reference: add irqpin support in DT   Guennadi Liakhovetski
• [PATCH/RFC 0/3] ARM: shmobile: kzm9g-reference: enable TWD   Guennadi Liakhovetski
• [PATCH 1/3] ARM: also support TWD clock, instantiated from platform data   Guennadi Liakhovetski
• [PATCH/RFC 2/3] ARM: shmobile: initialise clock early on kzm9g-reference   Guennadi Liakhovetski
• [PATCH/RFC 3/3] ARM: shmobile: kzm9g-reference: add a TWD DT node   Guennadi Liakhovetski
• [PATCH/RFC 2/3] ARM: shmobile: initialise clock early on kzm9g-reference   Guennadi Liakhovetski
• [PATCH/RFC 2/3] ARM: shmobile: initialise clock early on kzm9g-reference   Guennadi Liakhovetski
• [PATCH/RFC 0/2] ARM: shmobile: DT irqpin for r8a7779 and marzen-reference   Guennadi Liakhovetski
• [PATCH v4 3/3] ARM: shmobile: kzm9g-reference: add CPUFreq support   Guennadi Liakhovetski
• [PATCH v2] irqchip: renesas-intc-irqpin: DT binding for sense bitfield width   Guennadi Liakhovetski
• [PATCH v5 0/3] CPUFreq for sh73a0 / kzm9g, using cpufreq-cpu0   Guennadi Liakhovetski
• [PATCH v5 1/3] ARM: shmobile: sh73a0: add support for adjusting CPU frequency   Guennadi Liakhovetski
• [PATCH v5 2/3] ARM: shmobile: kzm9g-reference: add AS3711 and CPUFreq DT bindings   Guennadi Liakhovetski
• [PATCH v5 3/3] ARM: shmobile: sh73a0: add CPUFreq support   Guennadi Liakhovetski
• [PATCH v5 3/3] ARM: shmobile: sh73a0: add CPUFreq support   Guennadi Liakhovetski
• [PATCH v3] irqchip: renesas-intc-irqpin: DT binding for sense bitfield width   Guennadi Liakhovetski
• [PATCH v3] irqchip: renesas-intc-irqpin: DT binding for sense bitfield width   Guennadi Liakhovetski
• [PATCH v3] irqchip: renesas-intc-irqpin: DT binding for sense bitfield width   Guennadi Liakhovetski
• [PATCH v8 1/7] media: V4L2: add temporary clock helpers   Guennadi Liakhovetski
• [PATCH 0/6] ARM: shmobile: r8a7740: add MMCIF and SDHI to DT   Guennadi Liakhovetski
• [PATCH 1/6] ARM: shmobile: armadillo800eva: remove left-overs   Guennadi Liakhovetski
• [PATCH 2/6] ARM: shmobile: add SDHI and MMCIF interfaces to armadillo800eva-reference   Guennadi Liakhovetski
• [PATCH 3/6] ARM: shmobile: sh73a0: remove "0x" prefix from DT node names   Guennadi Liakhovetski
• [PATCH 4/6] ARM: shmobile: r8a7740: add MMCIF DMA definitions   Guennadi Liakhovetski
• [PATCH 5/6] ARM: shmobile: r8a7740: add DT node for one DMAC instance   Guennadi Liakhovetski
• [PATCH 6/6] ARM: shmobile: armadillo800eva-reference: add DMA support for MMCIF and SDHI   Guennadi Liakhovetski
• [PATCH 2/6] ARM: shmobile: add SDHI and MMCIF interfaces to armadillo800eva-reference   Guennadi Liakhovetski
• [GIT PULL] Multi Cluster Power Management infrastructure   Grant Likely
• [RFCv2 0/2] Representing interrupt affinity in devicetree   Grant Likely
• [PATCHv2 1/7] of: Add support for reading a u32 from a multi-value property.   Grant Likely
• [PATCH v3 0/6] Generic PHY Framework   Grant Likely
• [PATCH v3 1/6] drivers: phy: add generic PHY framework   Grant Likely
• [PATCH v3 0/6] Generic PHY Framework   Grant Likely
• [PATCH V4 10/18] ARM: OMAP2+: Add function to read GPMC settings from device-tree   Grant Likely
• [PATCH] clk: add DT test clock consumer driver   Grant Likely
• [PATCH v3 1/6] drivers: phy: add generic PHY framework   Grant Likely
• [PATCH] Documentation: dt: update properties in TI GPMC NAND example   Grant Likely
• [PATCH v5 0/5] Patch enables support for m25p64 SPI flash support on da850-EVM.   Grant Likely
• [REPOST PATCH] spi: s3c64xx: let device core setup the default pin configuration   Grant Likely
• [PATCH v7 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC   Grant Likely
• [PATCH v7 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC   Grant Likely
• [RFC PATCH 2/2] ARM: DT: kernel: DT cpu node bindings update   Grant Likely
• [PATCH v7 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC   Grant Likely
• [PATCH v7 2/3] of/pci: Provide support for parsing PCI DT ranges property   Grant Likely
• [PATCH v7 3/3] of/pci: mips: convert to common of_pci_range_parser   Grant Likely
• [PATCH v7 2/3] of/pci: Provide support for parsing PCI DT ranges property   Grant Likely
• [PATCH v3 1/6] drivers: phy: add generic PHY framework   Grant Likely
• [PATCH V2 1/7] kbuild: create an "include chroot" for DT bindings   Grant Likely
• AT91SAM9M10: Problem porting driver for MT9P031 sensor   Marcio Campos de Lima
• [PATCH] ARM: OMAP1: remove "config MACH_OMAP_HTCWIZARD"   Tony Lindgren
• [PATCH] omap: fix typo "CONFIG_BRIDGE_DVFS"   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: PRCM fixes for 3.10   Tony Lindgren
• [GIT PULL] ARM: OMAP5: Generic updates and es2 fixes for 3.10   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: Serial driver sysc cleanup for 3.10   Tony Lindgren
• [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: standardize integration for AES & SHA/MD5 IP blocks for 3.10   Tony Lindgren
• OMAP baseline test results for v3.9-rc3   Tony Lindgren
• [PATCH v4 01/21] usb: phy: nop: Add some parameters to platform data   Tony Lindgren
• [GIT PULL 2/3] omap cleanup for v3.10 merge window   Tony Lindgren
• [GIT PULL 1/3] omap non critical fixes for v3.10 merge window   Tony Lindgren
• [GIT PULL 3/3] omap hw crypto updates for v3.10 merge window   Tony Lindgren
• [PATCH v4] ARM: omap2: twl-common: Add default power configuration   Tony Lindgren
• OK to use commit 71856843 as base for further omap clean up?   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: System timer updates   Tony Lindgren
• Query on pinctrl usage for DT nodes   Tony Lindgren
• Query on pinctrl usage for DT nodes   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: GPMC updates   Tony Lindgren
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Tony Lindgren
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Tony Lindgren
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Tony Lindgren
• [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: GPMC updates   Tony Lindgren
• [PATCH 0/5] ARM: OMAP: DMTIMER updates for v3.10   Tony Lindgren
• [GIT PULL 1/3] omap usb platform init changes for v3.10 merge window   Tony Lindgren
• [GIT PULL 2/3] omap timer changes for v3.10 merge window   Tony Lindgren
• [GIT PULL 3/3] omap gpmc changes for v3.10 merge window   Tony Lindgren
• [PATCH 5/5] ARM: dts: OMAP2+: Identify GPIO banks that are always powered   Tony Lindgren
• [PATCH 5/5] ARM: dts: OMAP2+: Identify GPIO banks that are always powered   Tony Lindgren
• [PATCH v4 00/21] ARM: OMAP2+: Adapt to ehci-omap changes for 3.10   Tony Lindgren
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Tony Lindgren
• [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10   Tony Lindgren
• [PATCH v3 2/4] ARM: OMAP4+: PM: Consolidate OMAP4 PM code to re-use it for OMAP5   Tony Lindgren
• [PATCH v3 2/4] ARM: OMAP4+: PM: Consolidate OMAP4 PM code to re-use it for OMAP5   Tony Lindgren
• [GIT PULL] OMAP: PM: fixes for v3.10   Tony Lindgren
• [GIT PULL] OMAP: PM: cpuidle cleanups for v3.10   Tony Lindgren
• [GIT PULL 1/3] omap non critical fixes for v3.10 merge window   Tony Lindgren
• [PATCH v4 00/21] ARM: OMAP2+: Adapt to ehci-omap changes for 3.10   Tony Lindgren
• [RFC v2] dmaengine: omap-dma: Start DMA without delay for cyclic channels   Tony Lindgren
• [RFC PATCH 3/3] ARM: OMAP2+: Add command line parameter for debugSS module control   Tony Lindgren
• [RFC PATCH 0/3] ARM: OMAP2+: Add command line parameter for debugSS module control   Tony Lindgren
• [GIT PULL 2/3] omap timer changes for v3.10 merge window   Tony Lindgren
• [GIT PULL 2/3] omap timer changes for v3.10 merge window   Tony Lindgren
• [PATCH RESEND 1/1] omap4: control: Add the CONTROL_SMART2IO_PADCONF_2 register definition   Tony Lindgren
• [PATCH v2 RESEND] ARM: OMAP1: fix omap_udc registration   Tony Lindgren
• [PATCH] ARM: OMAP2+: omap2plus_defconfig: Add support for BMP085 pressure sensor   Tony Lindgren
• [PATCH] ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlight   Tony Lindgren
• [PATCH] ARM: OMAP: RX-51: add missing regulator supply definitions for lis3lv02d   Tony Lindgren
• [PATCH] omap2+: Remove useless Makefile line   Tony Lindgren
• [PATCH] omap2+: Remove useless Makefile line   Tony Lindgren
• [PATCH v4 0/3] ARM: OMAP2+: Export SoC information to userspace using SoC infrastructure   Tony Lindgren
• [PATCH] ARM: OMAP4: Enable fix for Cortex-A9 erratas   Tony Lindgren
• [GIT PULL] ARM: OMAP: Device Tree for 3.10   Tony Lindgren
• [PATCH v2] arm/dts: OMAP3: fix pinctrl-single configuration   Tony Lindgren
• [GIT PULL 1/5] omap pm fixes for v3.10 merge window   Tony Lindgren
• [GIT PULL 2/5] omap pm clean-up for v3.10 merge window   Tony Lindgren
• [GIT PULL 3/5] omap board changes for v3.10 merge window   Tony Lindgren
• [GIT PULL 4/5] omap soc changes for v3.10 merge window   Tony Lindgren
• [GIT PULL 5/5] omap dt changes for v3.10 merge window   Tony Lindgren
• [RFC PATCH 3/3] ARM: OMAP2+: Add command line parameter for debugSS module control   Tony Lindgren
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Tony Lindgren
• [PATCH v3 2/4] ARM: OMAP4+: PM: Consolidate OMAP4 PM code to re-use it for OMAP5   Tony Lindgren
• [GIT PULL 2/5] omap pm clean-up for v3.10 merge window   Tony Lindgren
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Tony Lindgren
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Tony Lindgren
• [RFC PATCH 3/3] ARM: OMAP2+: Add command line parameter for debugSS module control   Tony Lindgren
• [GIT PULL] OMAP PM cleanups for v3.10   Tony Lindgren
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Tony Lindgren
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Tony Lindgren
• [PATCH v2] ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock (fwd)   Tony Lindgren
• Query on pinctrl usage for DT nodes   Tony Lindgren
• [PATCH 25/26] arm: Don't use create_proc_read_entry() [RFC]   Tony Lindgren
• [GIT PULL 5/5] omap dt changes for v3.10 merge window   Tony Lindgren
• [PATCH 25/26] arm: Don't use create_proc_read_entry() [RFC]   Tony Lindgren
• [PATCH 25/26] arm: Don't use create_proc_read_entry() [RFC]   Tony Lindgren
• [PATCH V4 1/6] clk: OMAP: introduce device tree binding to kernel clock data   Tony Lindgren
• [PATCH] ARM: dts: Configure and fix the McSPI pins for 4430sdp   Tony Lindgren
• [PATCH V4 1/6] clk: OMAP: introduce device tree binding to kernel clock data   Tony Lindgren
• Query on pinctrl usage for DT nodes   Tony Lindgren
• [PATCH] ARM: dts: omap3-beagle-xm: Add USB Host support for Rev Ax/Bx   Tony Lindgren
• [PATCH] ARM: dts: omap3-beagle-xm: Add USB Host support for Rev Ax/Bx   Tony Lindgren
• [GIT PULL] omap dss board clean-up for v3.10 merge window   Tony Lindgren
• [PATCH 0/3] few omap randconfig fixes for v3.10   Tony Lindgren
• [PATCH 1/3] ARM: OMAP2+: Fix unmet direct dependencies for SERIAL_OMAP   Tony Lindgren
• [PATCH 2/3] ARM: OMAP2+: Fix unused variable warning for am3517 crane   Tony Lindgren
• [PATCH 3/3] ARM: OMAP2+: Fix is_gpmc_muxed warning for H4   Tony Lindgren
• [PATCH] ARM: dts: omap4-panda: Add USB Host support   Tony Lindgren
• [PATCH] ARM: dts: omap4-panda: Add USB Host support   Tony Lindgren
• [PATCH] gpio/omap: ensure gpio context is initialised   Tony Lindgren
• linux-next ARM multi-platform randconfig errors   Tony Lindgren
• Multiple issues with omap4 panda es in linux next   Tony Lindgren
• linux-next ARM multi-platform randconfig errors   Tony Lindgren
• Multiple issues with omap4 panda es in linux next   Tony Lindgren
• Multiple issues with omap4 panda es in linux next   Tony Lindgren
• [GIT PULL] omap dss board clean-up for v3.10 merge window   Tony Lindgren
• linux-next ARM multi-platform randconfig errors   Tony Lindgren
• linux-next ARM multi-platform randconfig errors   Tony Lindgren
• linux-next ARM multi-platform randconfig errors   Tony Lindgren
• linux-next ARM multi-platform randconfig errors   Tony Lindgren
• linux-next ARM multi-platform randconfig errors   Tony Lindgren
• linux-next ARM multi-platform randconfig errors   Tony Lindgren
• Multiple issues with omap4 panda es in linux next   Tony Lindgren
• Multiple issues with omap4 panda es in linux next   Tony Lindgren
• [GIT PULL] omap dss board clean-up for v3.10 merge window   Tony Lindgren
• Multiple issues with omap4 panda es in linux next   Tony Lindgren
• Multiple issues with omap4 panda es in linux next   Tony Lindgren
• [PATCH] ARM: OMAP4: change the device names in usb_bind_phy   Tony Lindgren
• [PATCH 05/21] ARM: OMAP2+: add dependencies on ARCH_MULTI_V6/V7   Tony Lindgren
• [PATCH 21/21] mtd: omap2: allow bulding as a module   Tony Lindgren
• Query on pinctrl usage for DT nodes   Tony Lindgren
• [PATCH] ARM: OMAP: remove unused variable   Tony Lindgren
• Multiple issues with omap4 panda es in linux next   Tony Lindgren
• [GIT PULL] musb regression on omap4 for v3.9   Tony Lindgren
• Multiple issues with omap4 panda es in linux next   Tony Lindgren
• [GIT PULL] omap dss board clean-up for v3.10 merge window   Tony Lindgren
• Multiple issues with omap4 panda es in linux next   Tony Lindgren
• Multiple issues with omap4 panda es in linux next   Tony Lindgren
• Multiple issues with omap4 panda es in linux next   Tony Lindgren
• Multiple issues with omap4 panda es in linux next   Tony Lindgren
• [PATCH 0/3] WLAN support for omap4 when booted with devicetree   Tony Lindgren
• [PATCH 1/3] ARM: OMAP2+: Legacy support for wl12xx when booted with devicetree   Tony Lindgren
• [PATCH 2/3] ARM: dts: Add muxing for wl12xx on the SDIO bus for pandaboard   Tony Lindgren
• [PATCH 3/3] ARM: dts: Add muxing for wl12xx on the SDIO bus for blaze   Tony Lindgren
• [PATCH 1/3] ARM: OMAP2+: Legacy support for wl12xx when booted with devicetree   Tony Lindgren
• [PATCH 2/3] ARM: dts: Add muxing for wl12xx on the SDIO bus for pandaboard   Tony Lindgren
• [PATCH 0/3] WLAN support for omap4 when booted with devicetree   Tony Lindgren
• Latest build results - errors/warnings - lots of them   Tony Lindgren
• Latest build results - errors/warnings - lots of them   Tony Lindgren
• [PATCH] ARM: OMAP2+: Fix multiple make randconfig errors if no SoC is selected   Tony Lindgren
• Latest build results - errors/warnings - lots of them   Tony Lindgren
• Latest build results - errors/warnings - lots of them   Tony Lindgren
• [PATCH V2 1/3] clk: ux500: Add support for sysctrl clocks   Russell King - ARM Linux
• [PATCH v1] ARM: keep __my_cpu_offset consistent with generic one   Russell King - ARM Linux
• [PATCH] ARM: Only initialize max_mapnr when using flatmem   Russell King - ARM Linux
• OK to use commit 71856843 as base for further omap clean up?   Russell King - ARM Linux
• [GIT PULL] Multi Cluster Power Management infrastructure   Russell King - ARM Linux
• [GIT PULL] Multi Cluster Power Management infrastructure   Russell King - ARM Linux
• [GIT PULL] Multi Cluster Power Management infrastructure   Russell King - ARM Linux
• [GIT PULL] Multi Cluster Power Management infrastructure   Russell King - ARM Linux
• [PATCH] ARM: Samsung: Select ARM_CPU_SUSPEND when required   Russell King - ARM Linux
• [PATCH] Report double word access atomicity on LPAE enabled targets through AUXV   Russell King - ARM Linux
• [PATCH] ARM: makefile: add tuning options for Armada 370/XP   Russell King - ARM Linux
• [RFC v2] dmaengine: omap-dma: Start DMA without delay for cyclic channels   Russell King - ARM Linux
• linux-next: build warning after merge of the final tree (probably arm-soc tree related)   Russell King - ARM Linux
• [RFC PATCH arm: initial TI-Nspire support]   Russell King - ARM Linux
• [RFC v2] dmaengine: omap-dma: Start DMA without delay for cyclic channels   Russell King - ARM Linux
• Removal of NWFPE in its entirety, and VFP emulation code   Russell King - ARM Linux
• Removal of NWFPE in its entirety, and VFP emulation code   Russell King - ARM Linux
• Removal of NWFPE in its entirety, and VFP emulation code   Russell King - ARM Linux
• Removal of NWFPE in its entirety, and VFP emulation code   Russell King - ARM Linux
• Removal of NWFPE in its entirety, and VFP emulation code   Russell King - ARM Linux
• Removal of NWFPE in its entirety, and VFP emulation code   Russell King - ARM Linux
• Removal of NWFPE in its entirety, and VFP emulation code   Russell King - ARM Linux
• Removal of NWFPE in its entirety, and VFP emulation code   Russell King - ARM Linux
• Removal of NWFPE in its entirety, and VFP emulation code   Russell King - ARM Linux
• Removal of NWFPE in its entirety, and VFP emulation code   Russell King - ARM Linux
• Removal of NWFPE in its entirety, and VFP emulation code   Russell King - ARM Linux
• Removal of NWFPE in its entirety, and VFP emulation code   Russell King - ARM Linux
• Removal of NWFPE in its entirety, and VFP emulation code   Russell King - ARM Linux
• [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig   Russell King - ARM Linux
• [PATCH] ARM: shmobile: BOCK-W: enable CONFIG_PM_RUNTIME in defconfig   Russell King - ARM Linux
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Russell King - ARM Linux
• [PATCH v11 1/3] ARM: Add base support for ARMv7-M   Russell King - ARM Linux
• [PATCH v11 0/3] Another round of ARMv7-M patches   Russell King - ARM Linux
• [PATCH] mmc: mmci: Allow MMCI to request channels with information acquired from DT   Russell King - ARM Linux
• [PATCH v2] serial: pl011: Add Device Tree support to request DMA channels   Russell King - ARM Linux
• [PATCH v2] serial: pl011: Add Device Tree support to request DMA channels   Russell King - ARM Linux
• [PATCH] ARM: sched_clock: Add more notrace to prevent recursion   Russell King - ARM Linux
• [PATCH] mmc: mmci: Allow MMCI to request channels with information acquired from DT   Russell King - ARM Linux
• [PATCH 1/10] LPC32XX: 001-mmc.1: Define + Implement DMA_FORCE_BURST for pl032   Russell King - ARM Linux
• [PATCH 2/10] LPC32XX: 002-mmc.1: Workaround for MMC+DMA on LPC32xx   Russell King - ARM Linux
• [RFC 06/10] video: ARM CLCD: Add DT & CDF support   Russell King - ARM Linux
• [PATCH 03/32] dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s   Russell King - ARM Linux
• [PATCH 15/32] dmaengine: ste_dma40: Separate Logical Global Interrupt Mask (GIM) unmasking   Russell King - ARM Linux
• [PATCH v3] pinctrl/pinconfig: add debug interface   Russell King - ARM Linux
• [PATCH 08/32] dmaengine: ste_dma40: Optimise local MAX() macro   Russell King - ARM Linux
• [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Russell King - ARM Linux
• [PATCH 1/2] Allow constructor name selection by architecture.   Russell King - ARM Linux
• Removal of NWFPE in its entirety, and VFP emulation code   Russell King - ARM Linux
• [PATCH 1/9] ARM: cpuidle: remove useless declaration   Russell King - ARM Linux
• [PATCH 1/3] ARM: also support TWD clock, instantiated from platform data   Russell King - ARM Linux
• [PATCH 1/2] ARM: EXYNOS: Add a platform bus notifier to set dma masks for Exynos5440   Russell King - ARM Linux
• [PATCH v2 1/2] ARM: shmobile: R8A7779: add Ether support   Russell King - ARM Linux
• [PATCH 1/9] ARM: cpuidle: remove useless declaration   Russell King - ARM Linux
• [PATCH 1/8] ARM: shmobile:Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code   Russell King - ARM Linux
• [PATCH 6/7] ARM: KVM: switch to a dual-step HYP init code   Russell King - ARM Linux
• [PATCH v6 1/4] arm: introduce psci_smp_ops   Russell King - ARM Linux
• [PATCH] ARM: smp: call platform's cpu_die in ipi_cpu_stop   Russell King - ARM Linux
• [PATCH] ARM: smp: call platform's cpu_die in ipi_cpu_stop   Russell King - ARM Linux
• [PATCH] ARM: smp: call platform's cpu_die in ipi_cpu_stop   Russell King - ARM Linux
• [PATCH] ARM: smp: call platform's cpu_die in ipi_cpu_stop   Russell King - ARM Linux
• [RFC PATCH 1/3] pstore-ram: use write-combine mappings   Russell King - ARM Linux
• [PATCH v4] mmc: dw_mmc: let device core setup the default pin configuration   Russell King - ARM Linux
• v7_flush_kern_cache_louis flushes up to L2?   Russell King - ARM Linux
• v7_flush_kern_cache_louis flushes up to L2?   Russell King - ARM Linux
• [RFC PATCHv2 arm: initial TI-Nspire support]   Russell King - ARM Linux
• [PATCH] ARM: pci: pass a parent to pci_common_init()   Russell King - ARM Linux
• [PATCH] ARM: pci: pass a parent to pci_common_init()   Russell King - ARM Linux
• [PATCH 1/2] ARM: default machine descriptor for multiplatform   Russell King - ARM Linux
• [PATCH v3 4/7] ARM: KVM: enforce maximum size for identity mapped code   Russell King - ARM Linux
• [PATCH v3 6/7] ARM: KVM: switch to a dual-step HYP init code   Russell King - ARM Linux
• [PATCH 1/2] GPIO: clps711x: Rewrite driver for using generic GPIO code   Russell King - ARM Linux
• [PATCH v3] ARM: pci: create pci_common_init_dev()   Russell King - ARM Linux
• [PATCH 4/4] ARM: mmp: add SMP support for pxa988   Russell King - ARM Linux
• [PATCHv8 07/19] arm: pci: add a align_resource hook   Russell King - ARM Linux
• [PATCH v2 3/3] ARM: arch_timer: use full 64-bit counter for sched_clock   Russell King - ARM Linux
• [PATCH v2 04/13] ARM: timer-sp: convert to use CLKSRC_OF init   Russell King - ARM Linux
• [RFC][PATCH] arm: highmem: Add support for flushing kmap_atomic mappings   Russell King - ARM Linux
• [PATCH v4, part3 01/15] mm: fix build warnings caused by free_reserved_area()   Russell King - ARM Linux
• [PATCH v4, part3 13/41] mm/ARM: prepare for removing num_physpages and simplify mem_init()   Russell King - ARM Linux
• [PATCH v2] serial: pl011: Add Device Tree support to request DMA channels   Russell King - ARM Linux
• [PATCH 21/32] dmaengine: ste_dma40: Also report the number of logical channels   Russell King - ARM Linux
• [PATCH v6 1/4] arm: introduce psci_smp_ops   Russell King - ARM Linux
• [PATCH] ARM: make cpu_init() notrace   Russell King - ARM Linux
• [PATCH] Report double word access atomicity on LPAE enabled targets through AUXV   Russell King - ARM Linux
• [PATCH v6 1/4] arm: introduce psci_smp_ops   Russell King - ARM Linux
• [PATCH v6 1/4] arm: introduce psci_smp_ops   Russell King - ARM Linux
• [RFC PATCH] drivers: bus: add ARM CCI support   Russell King - ARM Linux
• [PATCH] clk: vexpress: Add separate SP810 driver   Russell King - ARM Linux
• [RFC v2] video: ARM CLCD: Add DT & CDF support   Russell King - ARM Linux
• [PATCHv2] arm: Preserve TPIDRURW on context switch   Russell King - ARM Linux
• [PATCH v5 0/9] Reorganize R8A7779/Marzen USB code   Russell King - ARM Linux
• [PATCH] mm: add an option to disable bounce   Russell King - ARM Linux
• [PATCH v1] ARM: do not select ARCH_VEXPRESS by default on ARCH_MULTI_V7   Russell King - ARM Linux
• [PATCH v4 01/15] ARM: multi-cluster PM: secondary kernel entry code   Russell King - ARM Linux
• [PATCH v4 06/15] ARM: mcpm: generic SMP secondary bringup and hotplug support   Russell King - ARM Linux
• [PATCH v4 11/15] drivers/bus: add ARM CCI support   Russell King - ARM Linux
• [PATCH v4 12/15] ARM: CCI: ensure powerdown-time data is flushed from cache   Russell King - ARM Linux
• [PATCH v4 15/15] ARM: vexpress: Select multi-cluster SMP operation if required   Russell King - ARM Linux
• [PATCH v4 00/15] multi-cluster power management   Russell King - ARM Linux
• [PATCH v4 01/15] ARM: multi-cluster PM: secondary kernel entry code   Russell King - ARM Linux
• [PATCH v4 00/15] multi-cluster power management   Russell King - ARM Linux
• [PATCH v4 00/15] multi-cluster power management   Russell King - ARM Linux
• [PATCH v2] ARM: Kconfig: let ARM9TDMI and ARM7TDMI invisible.   Russell King - ARM Linux
• [PATCH v4 00/15] multi-cluster power management   Russell King - ARM Linux
• [PATCH 1/2] GPIO: clps711x: Rewrite driver for using generic GPIO code   Russell King - ARM Linux
• [PATCH] ARM: make cpu_init() notrace   Russell King - ARM Linux
• [PATCH 04/32] dmaengine: ste_dma40: Amalgamate DMA source and destination channel numbers   Russell King - ARM Linux
• [PATCH] of: Set the DMA mask to 64 bits on ARM LPAE systems   Russell King - ARM Linux
• [PATCH 6/9] crypto: ux500/cryp - Set DMA configuration though dma_slave_config()   Russell King - ARM Linux
• [PATCH 6/9] crypto: ux500/cryp - Set DMA configuration though dma_slave_config()   Russell King - ARM Linux
• [PATCH] module: fix mutiple defined issue   Russell King - ARM Linux
• [V9 PATCH 01/12] usb: phy: protect phy init and shutdown for mutiple deivces   Russell King - ARM Linux
• Latest build results - errors/warnings - lots of them   Russell King - ARM Linux
• [PATCH v4, part3 01/15] mm: fix build warnings caused by free_reserved_area()   Jiang Liu
• [PATCH v4, part3 03/15] mm/ARM64: kill poison_init_mem()   Jiang Liu
• [PATCH v2, part1 03/29] mm/ARM: use common help functions to free reserved pages   Jiang Liu
• [PATCH v4, part3 13/41] mm/ARM: prepare for removing num_physpages and simplify mem_init()   Jiang Liu
• [PATCH v4, part3 14/41] mm/ARM64: prepare for removing num_physpages and simplify mem_init()   Jiang Liu
• [RFC PATCH v1 15/19] mm/ARM: fix stale comment about VALID_PAGE()   Jiang Liu
• [PATCH v4, part3 13/41] mm/ARM: prepare for removing num_physpages and simplify mem_init()   Jiang Liu
• [PATCH v4, part3 01/15] mm: fix build warnings caused by free_reserved_area()   Jiang Liu
• [PATCH V3 0/3] ARM: tegra: add clock source for PMC   Joseph Lo
• [PATCH V3 1/3] ARM: tegra: get PMC clock source from DT   Joseph Lo
• [PATCH V3 2/3] ARM: dts: tegra: add clock source for PMC   Joseph Lo
• [PATCH V3 3/3] ARM: tegra: moving the CPU power timer function to PMC driver   Joseph Lo
• [PATCH V5 0/9] ARM: tegra: add platform suspend support   Joseph Lo
• [PATCH V5 1/9] gpio: tegra: add gpio wakeup source handling   Joseph Lo
• [PATCH V5 2/9] ARM: tegra: irq: add wake up handling   Joseph Lo
• [PATCH V5 3/9] ARM: dt: tegra: add bindings of power management configurations for PMC   Joseph Lo
• [PATCH V5 4/9] ARM: tegra: pm: add platform suspend support   Joseph Lo
• [PATCH V5 5/9] ARM: dts: tegra: add power gpio keys to DT   Joseph Lo
• [PATCH V5 6/9] ARM: dts: tegra: whistler: add wakeup source for KBC   Joseph Lo
• [PATCH V5 7/9] ARM: dts: tegra: add non-removable and keep-power-in-suspend property for MMC   Joseph Lo
• [PATCH V5 8/9] ARM: tegra: config: defconfig update   Joseph Lo
• [PATCH V5 9/9] ARM: dts: tegra: add the PM configurations of PMC   Joseph Lo
• [PATCH V3] ARM: tegra: cpuidle: remove redundant parameters for powered-down mode   Joseph Lo
• [PATCH V5 7/9] ARM: dts: tegra: add non-removable and keep-power-in-suspend property for MMC   Joseph Lo
• [PATCH V5 9/9] ARM: dts: tegra: add the PM configurations of PMC   Joseph Lo
• [PATCH V5 7/9] ARM: dts: tegra: add non-removable and keep-power-in-suspend property for MMC   Joseph Lo
• [PATCH V5 9/9] ARM: dts: tegra: add the PM configurations of PMC   Joseph Lo
• [PATCH V5 9/9] ARM: dts: tegra: add the PM configurations of PMC   Joseph Lo
• [PATCH 5/9] ARM: tegra2: cpuidle: change driver initialization   Joseph Lo
• [PATCH V4 0/2] ARM: tegra: add clock source of PMC   Joseph Lo
• [PATCH V4 1/2] ARM: dt: tegra: add clock source of PMC   Joseph Lo
• [PATCH V4 2/2] ARM: tegra: moving the CPU power timer function to PMC driver   Joseph Lo
• [PATCH V6 0/9] ARM: tegra: add platform suspend support   Joseph Lo
• [PATCH V6 1/9] gpio: tegra: add gpio wakeup source handling   Joseph Lo
• [PATCH V6 2/9] ARM: tegra: irq: add wake up handling   Joseph Lo
• [PATCH V6 3/9] ARM: dt: tegra: add bindings of power management configurations for PMC   Joseph Lo
• [PATCH V6 4/9] ARM: tegra: pm: add platform suspend support   Joseph Lo
• [PATCH V6 5/9] ARM: dts: tegra: add power gpio keys to DT   Joseph Lo
• [PATCH V6 6/9] ARM: dts: tegra: whistler: add wakeup source for KBC   Joseph Lo
• [PATCH V6 7/9] ARM: dts: tegra: add non-removable and keep-power-in-suspend property for MMC   Joseph Lo
• [PATCH V6 8/9] ARM: tegra: config: defconfig update   Joseph Lo
• [PATCH V6 9/9] ARM: dts: tegra: add the PM configurations of PMC   Joseph Lo
• [PATCH] clocksource: tegra: enable arch_timer   Joseph Lo
• [PATCH] clocksource: tegra: enable arch_timer   Joseph Lo
• [PATCH 13/18] ARM: tegra2: cpuidle: use init/exit common routine   Joseph Lo
• [PATCH] ARM: tegra: pm: fix build error w/o PM_SLEEP   Joseph Lo
• [PATCH 1/3] ARM: tegra: fix build error when THUMB2_KERNEL enabled   Joseph Lo
• [PATCH 2/3] ARM: tegra: fix relocation truncated error when THUMB2_KERNEL enabled   Joseph Lo
• [PATCH 3/3] ARM: tegra: make sure the pointer on 4 byte align when THUMB2_KERNEL enabled   Joseph Lo
• [PATCH 06/21] ARM: tegra: call cpu_do_idle from C code   Joseph Lo
• [PATCH 07/21] ARM: tegra: unify tegra_idle_device definitions   Joseph Lo
• [PATCH 0/3] ARM: add Freescale Vybrid family platform and development board support   Jingchang Lu
• [PATCH 1/3] ARM/MVF600: add Vybrid Family platform support   Jingchang Lu
• [PATCH 2/3] ARM:DTS:MVF600: add basic device tree source   Jingchang Lu
• [PATCH] tty/serial: add MVF uart driver support   Jingchang Lu
• [PATCH] ethernet/fec: Add Vybrid family fec support   Jingchang Lu
• [PATCH 0/2] mm: vmemmap: add vmemmap_verify check for hot-add node/memory case   Yinghai Lu
• [PATCH 0/2] mm: vmemmap: add vmemmap_verify check for hot-add node/memory case   Yinghai Lu
• [PATCH 2/6] rtc: rtc-m48t86: add hooks to support driver side memory mapping   Andrew Lunn
• [PATCH v2 0/3] Add DT board setup for LaCie CloudBox   Andrew Lunn
• [PATCH 05/18] cpuidle: make a single register function for all   Andrew Lunn
• [PATCH 05/18] cpuidle: make a single register function for all   Andrew Lunn
• [PATCH 05/18] cpuidle: make a single register function for all   Andrew Lunn
• [PATCH 05/18] cpuidle: make a single register function for all   Andrew Lunn
• [PATCHv2 08/10] arm: kirkwood: convert QNAP TS219 to use DT for the PCIe interface   Andrew Lunn
• [PATCHv2 08/10] arm: kirkwood: convert QNAP TS219 to use DT for the PCIe interface   Andrew Lunn
• [PATCHv2 08/10] arm: kirkwood: convert QNAP TS219 to use DT for the PCIe interface   Andrew Lunn
• [PATCHv2 08/10] arm: kirkwood: convert QNAP TS219 to use DT for the PCIe interface   Andrew Lunn
• [PATCHv2 04/10] arm: kirkwood: add SoC-level Device Tree data for PCIe interfaces   Andrew Lunn
• [PATCHv2 08/10] arm: kirkwood: convert QNAP TS219 to use DT for the PCIe interface   Andrew Lunn
• [PATCH] arm: kirkwood: convert QNAP TS219 to use DT for the PCIe interface   Andrew Lunn
• [PATCHv2 00/10] Use the mvebu PCIe driver on Kirkwood   Andrew Lunn
• [V3 patch 17/19] ARM: kirkwood: cpuidle: use init/exit common routine   Andrew Lunn
• [PATCH 1/3] Add support for GMT G72/G763 PWM fan controller   Andrew Lunn
• [PATCH] Enable PCIe port 1 on QNAP TS-11x/TS-21x   Andrew Lunn
• [PATCH] Kirkwood: Enable PCIe port 1 on QNAP TS-11x/TS-21x   Andrew Lunn
• [V3 patch 17/19] ARM: kirkwood: cpuidle: use init/exit common routine   Andrew Lunn
• [PATCH 1/3] mmc: mvsdio: Support inverted CD and WP GPIO lines   Andrew Lunn
• [PATCH 1/3] mmc: mvsdio: Support inverted CD and WP GPIO lines   Andrew Lunn
• [PATCH 0/3] ARM: Kirkwood: Add DT support for (eSATA) Sheevaplug   Andrew Lunn
• [PATCHv1 1/3] hwmon: Add support for GMT G762/G763 PWM fan controller   Andrew Lunn
• [PATCH] cpuidle: add maintainer entry   Andrew Lunn
• [PATCH] Kirkwood: Enable PCIe port 1 on QNAP TS-11x/TS-21x   Andrew Lunn
• [PATCH v2 0/6] clk: sunxi: gates support   Emilio López
• [PATCH V2 4/7] kbuild: always run gcc -E on *.dts, remove cmd_dtc_cpp   Emilio López
• [PATCH v2 1/7] clk: sunxi: Add support for AXI, AHB, APB0 and APB1 gates   Emilio López
• [PATCH 0/3] sunxi: unify main oscillator and its gate   Emilio López
• [PATCH 1/3] clk: composite: Add fixed-rate support   Emilio López
• [PATCH 2/3] clk: sunxi: Unify oscillator clock   Emilio López
• [PATCH 3/3] ARM: sunxi: unify osc24M_fixed and osc24M   Emilio López
• [PATCH 0/3] sunxi: unify main oscillator and its gate   Emilio López
• [PATCH 1/3] clk: composite: Add fixed-rate support   Emilio López
• [PATCH v2 3/3] clk: sunxi: Unify oscillator clock   Emilio López
• Array subscript above array bounds warning   Emilio López
• [PATCH 1/2] clk: sun5i: Add compatibles for Allwinner A13   Emilio López
• [PATCH 2/2] ARM: sun5i: Update the clock compatible strings   Emilio López
• [PATCH] ARM: add unwind annotations to ftrace asm   Jan Lübbe
• [PATCH v2] pinctrl/pinconfig: add debug interface   Laurent MEUNIER
• ARM: dts: MicroSys sbc6x support (i.MX6)   Pavel Machek
• [PATCHv2 1/2] ARM: socfpga: Enable soft reset   Pavel Machek
• [PATCHv3 1/3] ARM: socfpga: Enable soft reset   Pavel Machek
• [PATCHv3 2/3] ARM: socfpga: Add clock entries into device tree   Pavel Machek
• [PATCHv3 3/3] ARM: socfpga: Upgrade clk driver for socfpga to make use of dts clock entries   Pavel Machek
• dw_apb_timer_of.c: remove parts that were picoxcell-specific   Pavel Machek
• dw_apb_timer_of.c: remove parts that were picoxcell-specific   Pavel Machek
• dw_apb_timer_of.c: remove parts that were picoxcell-specific   Pavel Machek
• dw_apb_timer_of.c: remove parts that were picoxcell-specific   Pavel Machek
• dw_apb_timer_of.c: remove parts that were picoxcell-specific   Pavel Machek
• [RFC v2 16/18] ARM: OMAP2+: AM33XX: Basic suspend resume support   Daniel Mack
• [PATCH v7] clk: add si5351 i2c common clock driver   Daniel Mack
• [PATCH 0/3] add devicetree bindings for rtc-m48t86   Ryan Mallon
• [PATCH 1/3] rtc: rtc-m48t86: add devicetree bindings   Ryan Mallon
• [PATCH 0/3] add devicetree bindings for rtc-m48t86   Ryan Mallon
• [PATCH 2/6] rtc: rtc-m48t86: add hooks to support driver side memory mapping   Ryan Mallon
• [PATCH 2/6] rtc: rtc-m48t86: add hooks to support driver side memory mapping   Ryan Mallon
• [PATCH 2/6] rtc: rtc-m48t86: add hooks to support driver side memory mapping   Ryan Mallon
• [PATCH v7 1/5] mmc: davinci: allow driver to work without DMA resource   Manjunathappa, Prakash
• [PATCH v4 3/5] ARM: davinci: da850: add SPI1 DT node   Manjunathappa, Prakash
• [PATCH v5 0/5] Patch enables support for m25p64 SPI flash support on da850-EVM.   Manjunathappa, Prakash
• [PATCH v5 1/5] spi/davinci: no wildcards in DT compatible property   Manjunathappa, Prakash
• [PATCH v5 2/5] spi/davinci: add DT binding documentation   Manjunathappa, Prakash
• [PATCH v5 3/5] ARM: davinci: da850: add SPI1 DT node   Manjunathappa, Prakash
• [PATCH v5 4/5] ARM: davinci: da850: override SPI DT node device name   Manjunathappa, Prakash
• [PATCH v5 5/5] ARM: davinci: da850-evm: add SPI flash support   Manjunathappa, Prakash
• [PATCH] ARM: davinci: da850 evm: update clock rate for UART 1/2 DT nodes   Manjunathappa, Prakash
• [PATCH v5 0/5] Patch enables support for m25p64 SPI flash support on da850-EVM.   Manjunathappa, Prakash
• [PATCH 0/4] ARM: davinci: fix UART clock enabling   Manjunathappa, Prakash
• [PATCH 1/4] ARM: davinci: uart: move to dev_id based clk_get   Manjunathappa, Prakash
• [PATCH 2/4] ARM: davinci: da850: override device name of UART in DT kernel   Manjunathappa, Prakash
• [PATCH 3/4] ARM: davinci: da850: do not specify clock_frequency for UART DT node   Manjunathappa, Prakash
• [PATCH 4/4] ARM: davinci: da8xx: remove da8xx_uart_clk_enable   Manjunathappa, Prakash
• [PATCH 0/4] ARM: davinci: fix UART clock enabling   Manjunathappa, Prakash
• [PATCH] kbuild: generate generic headers before recursing into scripts   Michal Marek
• [PATCH v2 02/13] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init   Catalin Marinas
• [PATCH v2] arm64: Fix task tracing   Catalin Marinas
• [PATCH v2] arm64: Fix task tracing   Catalin Marinas
• [PATCH v2] arm64: Fix task tracing   Catalin Marinas
• [PATCH v2] arm64: Fix task tracing   Catalin Marinas
• [RFC PATCH 1/3] pstore-ram: use write-combine mappings   Catalin Marinas
• [PATCH] Report double word access atomicity on LPAE enabled targets through AUXV   Catalin Marinas
• [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Catalin Marinas
• [PATCH] Report double word access atomicity on LPAE enabled targets through AUXV   Catalin Marinas
• [PATCH] ARM64: kernel: compiling issue, duplicate definition of early_console   Catalin Marinas
• [PATCH] ARM64: kernel: compiling issue: need define readq and writeq for driver module using.   Catalin Marinas
• [PATCH 1/2] clocksource: arm_arch_timer: unify sched_clock init   Catalin Marinas
• [PATCH 2/2] clocksource: arm_arch_timer: add boot and suspend sched_clock offset   Catalin Marinas
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Catalin Marinas
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Catalin Marinas
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Catalin Marinas
• [PATCH] Report double word access atomicity on LPAE enabled targets through AUXV   Catalin Marinas
• [PATCH 2/4] arm64: Initial defconfig for APM X-Gene SOC family   Catalin Marinas
• ARM: 7684/1: errata: Workaround for Cortex-A15 erratum 798181 (TLBI/DSB operations)   Catalin Marinas
• [PATCH] ARM64: kernel: compiling issue, define cmpxchg64 and cmpxchg64_local for outside using.   Catalin Marinas
• [PATCH V2 0/4] arm64: Initial patch-set for APM X-Gene SOC family   Catalin Marinas
• ARM: 7684/1: errata: Workaround for Cortex-A15 erratum 798181 (TLBI/DSB operations)   Catalin Marinas
• [PATCH] arm64: compiling issue, need add include/asm/vga.h file   Catalin Marinas
• [PATCH v2] arm64: compiling issue, need add include/asm/vga.h file   Catalin Marinas
• [PATCH v3] arm64: compiling issue, need add include/asm/vga.h file   Catalin Marinas
• [PATCH] of: Set the DMA mask to 64 bits on ARM LPAE systems   Catalin Marinas
• [PATCH] ARM64: mm: Correct show_pte behaviour.   Catalin Marinas
• [PATCH] of: Set the DMA mask to 64 bits on ARM LPAE systems   Catalin Marinas
• [PATCH v4 1/7] ARM: KVM: simplify HYP mapping population   Catalin Marinas
• [PATCH v4 5/7] ARM: KVM: rework HYP page table freeing   Catalin Marinas
• [PATCH v3 02/32] arm64: KVM: define HYP and Stage-2 translation page flags   Catalin Marinas
• [PATCH V3] of: Set the DMA mask to 64 bits when dma_addr_t is 64-bits   Catalin Marinas
• [PATCH v4 5/7] ARM: KVM: rework HYP page table freeing   Catalin Marinas
• linux-next: manual merge of the arm-soc tree with the xen-arm tree   Catalin Marinas
• [PATCH v3 07/32] arm64: KVM: fault injection into a guest   Catalin Marinas
• [PATCH v3 08/32] arm64: KVM: architecture specific MMU backend   Catalin Marinas
• [Question] flush_dcache_page() need to flush icache?   Catalin Marinas
• [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Catalin Marinas
• [Question] flush_dcache_page() need to flush icache?   Catalin Marinas
• [RFC PATCH 3/9] mm: hugetlb: Copy general hugetlb code from x86 to mm.   Catalin Marinas
• some question about monitor mode support in arm   Dave Martin
• Anyone implement Cortex A9 FIQ   Dave Martin
• RFC: right way to conditional-ize some macros for LTO   Dave Martin
• [PATCH v4 2/2] arm: prefer PSCI for SMP bringup   Dave Martin
• Anyone implement Cortex A9 FIQ   Dave Martin
• hypervisor/firmware calling conventions (Was: Re: [Xen-devel] [PATCH 1/4] xen/arm: basic PSCI support, implement cpu_on)   Dave Martin
• [RFC PATCH 01/11] Documentation: DT: arm: define CPU topology bindings   Dave Martin
• [RFC PATCH 01/11] Documentation: DT: arm: define CPU topology bindings   Dave Martin
• [RFC PATCH] ARM: Remove backwards-compatibility IT macros for CONFIG_LTO   Dave Martin
• hypervisor/firmware calling conventions (Was: Re: [Xen-devel] [PATCH 1/4] xen/arm: basic PSCI support, implement cpu_on)   Dave Martin
• [RFC PATCH 01/11] Documentation: DT: arm: define CPU topology bindings   Dave Martin
• [PATCH 3/3] ARM: tegra: make sure the pointer on 4 byte align when THUMB2_KERNEL enabled   Dave Martin
• [RFC PATCH 2/2] ARM: DT: kernel: DT cpu node bindings update   Dave Martin
• [PATCH 3/3] ARM: tegra: make sure the pointer on 4 byte align when THUMB2_KERNEL enabled   Dave Martin
• [RFC PATCH 2/2] ARM: DT: kernel: DT cpu node bindings update   Dave Martin
• [PATCH 3/3] ARM: tegra: make sure the pointer on 4 byte align when THUMB2_KERNEL enabled   Dave Martin
• [PATCH 3/3] ARM: tegra: make sure the pointer on 4 byte align when THUMB2_KERNEL enabled   Dave Martin
• [PATCH 1/3] ARM: tegra: fix build error when THUMB2_KERNEL enabled   Dave Martin
• [PATCH 2/3] ARM: tegra: fix relocation truncated error when THUMB2_KERNEL enabled   Dave Martin
• [RFC PATCH] drivers: bus: add ARM CCI support   Dave Martin
• [PATCH v4 03/15] ARM: mcpm: introduce helpers for platform coherency exit/setup   Dave Martin
• [PATCH v4 00/15] multi-cluster power management   Dave Martin
• Latest build results - errors/warnings - lots of them   Dave Martin
• Latest build results - errors/warnings - lots of them   Dave Martin
• [PATCH 1/2] ARM: KVM: add architecture specific hook for capabilities   Peter Maydell
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Peter Maydell
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Peter Maydell
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Peter Maydell
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Peter Maydell
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Peter Maydell
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Peter Maydell
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Peter Maydell
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Peter Maydell
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Peter Maydell
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Peter Maydell
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Peter Maydell
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Peter Maydell
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Peter Maydell
• [PATCH] ARM: KVM: Allow host virtual timer irq number to be different from guest virtual timer irq number   Peter Maydell
• [PATCH 0/2] Early printk support for virtio console devices.   Peter Maydell
• [PATCH 0/2] Early printk support for virtio console devices.   Peter Maydell
• [PATCH 0/2] Early printk support for virtio console devices.   Peter Maydell
• Removal of NWFPE in its entirety, and VFP emulation code   Steve McIntyre
• Need help to measure and tune the latency in Linux RT   Stanislav Meduna
• No subject   Viral Mehta
• omap cpufreq driver in multi-platform kernels   Nishanth Menon
• regulator: query on regulator re-entrance   Nishanth Menon
• [PATCH v2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Nishanth Menon
• [PATCH v3 1/4] ARM: OMAP4+: PM: Consolidate MPU subsystem PM code for re-use   Nishanth Menon
• [PATCH v3 1/4] ARM: OMAP4+: PM: Consolidate MPU subsystem PM code for re-use   Nishanth Menon
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Nishanth Menon
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Nishanth Menon
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Nishanth Menon
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Nishanth Menon
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Nishanth Menon
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Nishanth Menon
• [RESEND PATCH V6 1/4] cpufreq: exynos: Add cpufreq driver for exynos5440   Nishanth Menon
• [PATCH V4 0/6] ARM: OMAP3+: support cpufreq-cpu0 for device tree boot   Nishanth Menon
• [PATCH V4 1/6] clk: OMAP: introduce device tree binding to kernel clock data   Nishanth Menon
• [PATCH V4 2/6] ARM: dts: OMAP3: add clock nodes for CPU   Nishanth Menon
• [PATCH V4 3/6] ARM: dts: OMAP4: add clock nodes for CPU   Nishanth Menon
• [PATCH V4 4/6] ARM: dts: AM33XX: add clock nodes for CPU   Nishanth Menon
• [PATCH V4 5/6] ARM: OMAP2+: AM33XX: add lateinit hook for calling pm late init   Nishanth Menon
• [PATCH V4 6/6] ARM: OMAP3+: use cpu0-cpufreq driver in device tree supported boot   Nishanth Menon
• [PATCH V4 1/6] clk: OMAP: introduce device tree binding to kernel clock data   Nishanth Menon
• [PATCH V4 1/6] clk: OMAP: introduce device tree binding to kernel clock data   Nishanth Menon
• [PATCH] cpufreq: exynos5440: Protect opp search calls with rcu lock   Nishanth Menon
• [PATCH V4 1/6] clk: OMAP: introduce device tree binding to kernel clock data   Nishanth Menon
• [PATCH 0/2] ARM: dts: OMAP36xx/OMAP4460 Fix CPU OPP voltages   Nishanth Menon
• [PATCH 1/2] ARM: dts: OMAP36xx: Fix CPU OPP voltages   Nishanth Menon
• [PATCH 2/2] ARM: dts: OMAP4460: Fix CPU OPP voltages   Nishanth Menon
• [PATCH] ARM: pxa: move debug uart code   Eric Miao
• [PATCH] Enable PCIe port 1 on QNAP TS-11x/TS-21x   Martin Michlmayr
• [PATCH] Enable PCIe port 1 on QNAP TS-11x/TS-21x   Martin Michlmayr
• [PATCH] Kirkwood: Enable PCIe port 1 on QNAP TS-11x/TS-21x   Martin Michlmayr
• [PATCH v4 0/6] Generic PHY Framework   David Miller
• [PATCH v4 0/6] Generic PHY Framework   David Miller
• [PATCH] net: mv643xx_eth: Add GRO support   David Miller
• [PATCH] net: mv643xx_eth: Add GRO support   David Miller
• [PATCH v2] net: mv643xx_eth: remove deprecated inet_lro support   David Miller
• [PATCH] ethernet/fec: Add Vybrid family fec support   David Miller
• net: mvneta: fix improper tx queue usage in mvneta_tx()   David Miller
• [PATCH] net/macb: fix error return code in macb_probe()   David Miller
• [PATCH V3 2/3] ARM: net: bpf_jit: make code generation less dependent on struct sk_filter.   David Miller
• [PATCH 1/4] net: velocity: Alphabetize #includes   David Miller
• [PATCH v2 05/21] atm: he: use msleep instead of large udelay constants   David Miller
• [PATCHv2 0/3] Add support for velocity network driver on platform devices   David Miller
• [PATCH] ARM: mvebu: Use common of_clk_init() function   Jean-Francois Moine
• [PATCH v2] ARM: kirkwood: extend the kirkwood i2s driver for DT usage   Jean-Francois Moine
• [PATCH 04/10] arm: zynq: Load scu baseaddress at run time   Pawel Moll
• [PATCH v2 06/13] ARM: vexpress: remove sp804 OF init   Pawel Moll
• [PATCH v2 07/13] ARM: dts: vexpress: disable CA9 core tile sp804 timer   Pawel Moll
• [PATCH v2 08/13] ARM: vexpress: remove extra timer-sp control register clearing   Pawel Moll
• [PATCH] mfd: vexpress: Give the "leds-gpio" device a real parent   Pawel Moll
• [PATCH 04/10] arm: zynq: Load scu baseaddress at run time   Pawel Moll
• [PATCH 04/10] arm: zynq: Load scu baseaddress at run time   Pawel Moll
• [RFC PATCH arm: initial TI-Nspire support]   Pawel Moll
• [PATCH] ARM: vexpress: Remove A9 PMU compatible values for non-A9 platforms   Pawel Moll
• [PATCH] clk: vexpress: Add separate SP810 driver   Pawel Moll
• [PATCH] clk: vexpress: Add separate SP810 driver   Pawel Moll
• [RFC 00/10] Versatile Express CLCD DVI output support   Pawel Moll
• [PATCH] clk: vexpress: Add separate SP810 driver   Pawel Moll
• linux-next: manual merge of the clk tree with the arm-soc tree   Pawel Moll
• [PATCH] clk: vexpress: Add separate SP810 driver   Pawel Moll
• [PATCH v1] ARM: do not select ARCH_VEXPRESS by default on ARCH_MULTI_V7   Pawel Moll
• [PATCH] mfd: vexpress: Handle pending config transactions   Pawel Moll
• [PATCH] mfd: vexpress: Handle pending config transactions   Pawel Moll
• [PATCH v2] mfd: vexpress: Handle pending config transactions   Pawel Moll
• [PATCH] ARM: kirkwood: DT board setup for CloudBox   Chris Moore
• [PATCH] ARM: kirkwood: DT board setup for CloudBox   Chris Moore
• [PATCH] ARM: kirkwood: DT board setup for CloudBox   Chris Moore
• [PATCH 2/3 v2] ARM: shmobile: r8a7778: add r8a7778_init_irq_extpin()   Kuninori Morimoto
• [PATCH 3/3 v2] ARM: shmobile: bockw: add SMSC ethernet support   Kuninori Morimoto
• [PATCH 1/2] ARM: shmobile: R8A7779: add Ether support   Kuninori Morimoto
• [PATCH 1/2] ARM: shmobile: R8A7779: add Ether support   Kuninori Morimoto
• [PATCH 3/3 v2] ARM: shmobile: bockw: add SMSC ethernet support   Kuninori Morimoto
• [PATCH 0/5 v3] ARM: shmobile: Add SMSC support on Bock-W   Kuninori Morimoto
• [PATCH 1/5 v3] ARM: shmobile: r8a7778: remove pointless PLATFORM_INFO()   Kuninori Morimoto
• [PATCH 2/5 v3] ARM: shmobile: r8a7778: add r8a7778_init_irq_extpin()   Kuninori Morimoto
• [PATCH 3/5 v3] ARM: shmobile: bockw: add SMSC ethernet support   Kuninori Morimoto
• [PATCH 4/5 v3] ARM: shmobile: bockw: enable network settings on bootargs   Kuninori Morimoto
• [PATCH 5/5 v3] ARM: shmobile: bockw: enable SMSC ethernet on defconfig   Kuninori Morimoto
• [PATCH 1/2] ARM: shmobile: R8A7779: add Ether support   Kuninori Morimoto
• [PATCH 1/2] ARM: shmobile: R8A7779: add Ether support   Kuninori Morimoto
• [PATCH/RFC 2/3] ARM: shmobile: initialise clock early on kzm9g-reference   Kuninori Morimoto
• APE6EVM and Runtime PM   Kuninori Morimoto
• APE6EVM and Runtime PM   Kuninori Morimoto
• [PATCH/RFC 2/3] ARM: shmobile: initialise clock early on kzm9g-reference   Kuninori Morimoto
• APE6EVM and Runtime PM   Kuninori Morimoto
• [PATCH v2 1/2] ARM: shmobile: R8A7779: add Ether support   Kuninori Morimoto
• [PATCH v2 2/2] ARM: shmobile: R8A7778: add Ether support   Kuninori Morimoto
• [PATCH 0/8] Reorganize R8A7779/Marzen USB code   Kuninori Morimoto
• [PATCH] irqchip: irqc: Add runtime PM support   Kuninori Morimoto
• [RFC/PATCH 0/7] ARCH: shmobile: defconfig consolidation   Kuninori Morimoto
• [PATCH 00/02] ARM: shmobile: r8a7790 Lager arch timer fixes   Kuninori Morimoto
• [PATCH 00/02] ARM: shmobile: r8a7790 Lager arch timer fixes   Kuninori Morimoto
• [RFC/PATCH 0/7] ARCH: shmobile: defconfig consolidation   Kuninori Morimoto
• [RFC/PATCH 0/7] ARCH: shmobile: defconfig consolidation   Kuninori Morimoto
• [PATCH v2 0/9] Reorganize R8A7779/Marzen USB code   Kuninori Morimoto
• [PATCH v2 0/9] Reorganize R8A7779/Marzen USB code   Kuninori Morimoto
• [PATCH v2 0/9] Reorganize R8A7779/Marzen USB code   Kuninori Morimoto
• [PATCH 0/2] Add I2C support to R8A7778/BOCK-W   Kuninori Morimoto
• [PATCH 2/4] ARM: shmobile: r8a7779: add VIN support   Kuninori Morimoto
• [PATCH v2 0/9] Reorganize R8A7779/Marzen USB code   Kuninori Morimoto
• [PATCH 0/2] mm: vmemmap: add vmemmap_verify check for hot-add node/memory case   Andrew Morton
• [PATCH V2] video: implement a simple framebuffer driver   Andrew Morton
• [PATCH v3] [RESEND] mm: Make snapshotting pages for stable writes a per-bio operation   Andrew Morton
• [PATCH V2 1/3] seccomp: add generic code for jitted seccomp filters.   Andrew Morton
• [PATCH V2 1/3] seccomp: add generic code for jitted seccomp filters.   Andrew Morton
• [PATCH V2 1/3] seccomp: add generic code for jitted seccomp filters.   Andrew Morton
• [PATCH v3 -next 4/5] x86: Add support for LZ4-compressed kernel   Andrew Morton
• [PATCH V3 2/3] ARM: net: bpf_jit: make code generation less dependent on struct sk_filter.   Andrew Morton
• [PATCH V3 2/3] ARM: net: bpf_jit: make code generation less dependent on struct sk_filter.   Andrew Morton
• [PATCH v3 -next 3/5] arm: Add support for LZ4-compressed kernel   Andrew Morton
• [PATCH] mm: add an option to disable bounce   KOSAKI Motohiro
• [PATCH] Fix omap4 panda LED definitions   Dan Murphy
• [PATCH] ARM: dts: omap4-panda: Add LED support into the panda DTS files   Dan Murphy
• [PATCH] ARM: dts: omap4-panda: Add LED support into the panda DTS files   Dan Murphy
• [PATCHv2] ARM:dts:omap4-panda:Update the LED support for the panda DTS   Dan Murphy
• [PATCHv2] ARM:dts:omap4-panda:Update the LED support for the panda DTS   Dan Murphy
• [PATCH v3] of/pci: Provide support for parsing PCI DT ranges property   Andrew Murray
• [RFCv1 08/11] PCI: Introduce new MSI chip infrastructure   Andrew Murray
• [RFCv1 08/11] PCI: Introduce new MSI chip infrastructure   Andrew Murray
• [PATCH v5 0/3] of/pci: Provide common support for PCI DT parsing   Andrew Murray
• [PATCH v5 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC   Andrew Murray
• [PATCH v5 2/3] of/pci: Provide support for parsing PCI DT ranges property   Andrew Murray
• [PATCH v5 3/3] of/pci: mips: convert to common of_pci_range_parser   Andrew Murray
• [PATCH v5 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC   Andrew Murray
• [PATCH v5 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC   Andrew Murray
• [PATCH v5 2/3] of/pci: Provide support for parsing PCI DT ranges property   Andrew Murray
• [PATCH v6 0/3] of/pci: Provide common support for PCI DT parsing   Andrew Murray
• [PATCH v6 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC   Andrew Murray
• [PATCH v6 2/3] of/pci: Provide support for parsing PCI DT ranges property   Andrew Murray
• [PATCH v6 3/3] of/pci: mips: convert to common of_pci_range_parser   Andrew Murray
• [PATCH 11/11] RFC: ARM: get PCI device IRQs from device tree   Andrew Murray
• [PATCH] ARM: pci: pass a parent to pci_common_init()   Andrew Murray
• [PATCH] ARM: pci: pass a parent to pci_common_init()   Andrew Murray
• [PATCH v4] ARM: pci: create pci_common_init_dev()   Andrew Murray
• [PATCH v7 0/3] of/pci: Provide common support for PCI DT parsing   Andrew Murray
• [PATCH v7 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC   Andrew Murray
• [PATCH v7 2/3] of/pci: Provide support for parsing PCI DT ranges property   Andrew Murray
• [PATCH v7 3/3] of/pci: mips: convert to common of_pci_range_parser   Andrew Murray
• [PATCH v7 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC   Andrew Murray
• [PATCH v6 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC   Andrew Murray
• [PATCH v6 0/3] of/pci: Provide common support for PCI DT parsing   Andrew Murray
• [PATCH v7 3/3] of/pci: mips: convert to common of_pci_range_parser   Andrew Murray
• [PATCH v7 2/3] of/pci: Provide support for parsing PCI DT ranges property   Andrew Murray
• [PATCH v7 3/3] of/pci: mips: convert to common of_pci_range_parser   Andrew Murray
• I/O and multiple PCI buses   Andrew Murray
• [PATCH v7 2/3] of/pci: Provide support for parsing PCI DT ranges property   Andrew Murray
• [GIT PULL V2 1/4] mvebu driver changes for v3.10   Andrew Murray
• [PATCH v8 0/3] of/pci: Provide common support for PCI DT parsing   Andrew Murray
• [PATCH v8 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC   Andrew Murray
• [PATCH v8 2/3] of/pci: Provide support for parsing PCI DT ranges property   Andrew Murray
• [PATCH v8 3/3] of/pci: mips: convert to common of_pci_range_parser   Andrew Murray
• [PATCH v7 3/3] of/pci: mips: convert to common of_pci_range_parser   Andrew Murray
• [PATCH v7 2/3] of/pci: Provide support for parsing PCI DT ranges property   Andrew Murray
• [RFC PATCH v3 5/6] sched: pack the idle load balance   Preeti U Murthy
• [RFC PATCH v3 5/6] sched: pack the idle load balance   Preeti U Murthy
• [RFC PATCH v3 5/6] sched: pack the idle load balance   Preeti U Murthy
• [RFC PATCH v3 3/6] sched: pack small tasks   Preeti U Murthy
• [PATCH 3/3] driver: net: ethernet: cpsw: dual emac interface implementation   Mugunthan V N
• [PATCH 0/3] Dual EMAC mode implementation of CPSW   Mugunthan V N
• [PATCH 0/3] Dual EMAC mode implementation of CPSW   Mugunthan V N
• [PATCH 0/3] Dual EMAC mode implementation of CPSW   Mugunthan V N
• [PATCH] remove vlan tags in CPSW dual emac mode   Mugunthan V N
• [PATCH 1/3] ARM/MVF600: add Vybrid Family platform support   Ed Nash
• [PATCH v4 1/6] drivers: phy: add generic PHY framework   Sylwester Nawrocki
• [PATCH v4 1/6] drivers: phy: add generic PHY framework   Sylwester Nawrocki
• EXYNOS will support only DT from v3.10   Sylwester Nawrocki
• [PATCH 10/23] [media] exynos: remove unnecessary header inclusions   Sylwester Nawrocki
• [PATCH v4 1/6] drivers: phy: add generic PHY framework   Sylwester Nawrocki
• [PATCH v5 1/6] drivers: phy: add generic PHY framework   Sylwester Nawrocki
• [PATCH v5 1/6] drivers: phy: add generic PHY framework   Sylwester Nawrocki
• [PATCH 0/3] clk: Exynos: Register audio subsytem clocks using common clk framework   Sylwester Nawrocki
• [PATCH 1/3] clk: exynos: register audio subsystem clocks using common clock framework   Sylwester Nawrocki
• [PATCH] clk: exynos4: export clocks required for fimc-is   Sylwester Nawrocki
• [PATCH] ARM: S3C24XX: Correct NR_IRQS definition for s3c2440   Sylwester Nawrocki
• [PATCH] ARM: Samsung: Select ARM_CPU_SUSPEND when required   Sylwester Nawrocki
• [PATCH] ARM: S3C24XX: Remove unused GPIO drive strength register definitions   Sylwester Nawrocki
• [PATCH] ARM: S3C24XX: Correct NR_IRQS definition for s3c2440   Sylwester Nawrocki
• [PATCH] ARM: Samsung: Select ARM_CPU_SUSPEND when required   Sylwester Nawrocki
• [PATCH 0/3] clk: Exynos: Register audio subsytem clocks using common clk framework   Sylwester Nawrocki
• [PATCH 1/3] clk: exynos: register audio subsystem clocks using common clock framework   Sylwester Nawrocki
• [PATCH] ARM: Samsung: Select ARM_CPU_SUSPEND when required   Sylwester Nawrocki
• [PATCH] ARM: S3C24XX: Fix interrupt pending register offset of the EINT controller   Sylwester Nawrocki
• [GIT PULL 10/10] devel-samsung for v3.10   Sylwester Nawrocki
• [GIT PULL 10/10] devel-samsung for v3.10   Sylwester Nawrocki
• [PATCH RESEND] ARM: EXYNOS: no more support non-DT for EXYNOS SoCs   Sylwester Nawrocki
• [PATCH RESEND] ARM: EXYNOS: no more support non-DT for EXYNOS SoCs   Sylwester Nawrocki
• [PATCH 11/30] [media] exynos: remove unnecessary header inclusions   Sylwester Nawrocki
• [PATCH v8 1/7] media: V4L2: add temporary clock helpers   Sylwester Nawrocki
• [PATCH] ARM: S3C24XX: add devicetree support for smdk2416   Sylwester Nawrocki
• [PATCH v3] pinctrl: Add pinctrl-s3c24xx driver   Sylwester Nawrocki
• [PATCH v3 0/6] Generic PHY Framework   Sylwester Nawrocki
• [PATCH 1/7] clk: exynos: prepare for multiplatform   Sylwester Nawrocki
• [PATCH v5 00/14] ARM: samsung-time: Prepare for multiplatform support   Sylwester Nawrocki
• [PATCH v3 00/10] ARM: exynos multiplatform series, part 1   Sylwester Nawrocki
• [PATCH] cpufreq: exynos: allow disabling cpufreq drivers   Sylwester Nawrocki
• [PATCH] cpufreq: exynos: allow disabling cpufreq drivers   Sylwester Nawrocki
• [PATCH] cpufreq: exynos: allow disabling cpufreq drivers   Sylwester Nawrocki
• [PATCH 0/9] s3c24xx LCD controller driver cleanup   Sylwester Nawrocki
• [PATCH 1/9] s3c2410fb: Move platform data declarations to include/linux/platform_data   Sylwester Nawrocki
• [PATCH 2/9] s3c2410fb: Make most of register definitions local   Sylwester Nawrocki
• [PATCH 3/9] ARM: S3C24XX: Remove include/mach/regs-lcd.h header file   Sylwester Nawrocki
• [PATCH 4/9] s3c2410fb: Register single platform driver   Sylwester Nawrocki
• [PATCH 5/9] s3c2410fb: Use dev_pm_ops   Sylwester Nawrocki
• [PATCH 6/9] s3c2410fb: Enable display by default   Sylwester Nawrocki
• [PATCH 7/9] s3c2410fb: Use devm_ioremap_resource()   Sylwester Nawrocki
• [PATCH 8/9] s3c2410fb: Remove redundant platform_set_drvdata()   Sylwester Nawrocki
• [PATCH 9/9] s3c2410fb: Use module parameter instead of a sysfs entry   Sylwester Nawrocki
• [PATCH 2/8] ARM: OMAP2+: hwmod: Cleanup sidle/mstandby programming   Rajendra Nayak
• Query regarding clk framework - from .set_rate api   Rajendra Nayak
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Rajendra Nayak
• [PATCH 2/8] ARM: OMAP2+: hwmod: Cleanup sidle/mstandby programming   Rajendra Nayak
• [PATCH V4 1/6] clk: OMAP: introduce device tree binding to kernel clock data   Rajendra Nayak
• [PATCH 2/8] ARM: OMAP2+: hwmod: Cleanup sidle/mstandby programming   Rajendra Nayak
• [PATCH v2 0/6] ARM; OMAP2+: hwmod and SERIAL: Remove sysc handling from driver   Rajendra Nayak
• [PATCH v2 1/6] ARM: OMAP2+: hwmod: Fix sidle programming in _enable_sysc()/_idle_sysc()   Rajendra Nayak
• [PATCH v2 2/6] ARM: OMAP2+: hwmod: Add a new flag to handle SIDLE in SWSUP only in active   Rajendra Nayak
• [PATCH v2 3/6] ARM: OMAP2+: hwmod-data: UART IP needs software control to manage sidle modes   Rajendra Nayak
• [PATCH v2 4/6] SERIAL: OMAP: Remove the slave idle handling from the driver   Rajendra Nayak
• [PATCH v2 5/6] ARM: OMAP2+: serial: Remove the un-used slave idle hooks   Rajendra Nayak
• [PATCH v2 6/6] ARM: OMAP2+: hwmod: Remove sysc slave idle and auto idle apis   Rajendra Nayak
• [PATCH] ARM: at91/dts: at91sam9g20ek_2mmc: fix card detection   Robert Nelson
• [PATCH] ARM: at91/dts: at91sam9g20ek_2mmc: fix card detection   Robert Nelson
• [PATCH] ARM: dts: omap3-beagle-xm: Add USB Host support for Rev Ax/Bx   Robert Nelson
• [PATCHv2 1/2] ARM: socfpga: Enable soft reset   Dinh Nguyen
• [PATCHv3 1/3] ARM: socfpga: Enable soft reset   Dinh Nguyen
• dw_apb_timer_of.c: remove parts that were picoxcell-specific   Dinh Nguyen
• [PATCH] ARM: davinci: use is IS_ENABLED macro   Sekhar Nori
• [PATCH v3 1/3] ARM: davinci: clk framework support for enable/disable functionality   Sekhar Nori
• [PATCH v3 2/3] arm: davinci: clock node support for ECAP & EHRPWM   Sekhar Nori
• [PATCH v3 3/3] ARM: davinci: da850: add EHRPWM & ECAP DT node   Sekhar Nori
• [PATCH v3 0/3] Platform support for EHRPWM & ECAP devices in DAVINCI.   Sekhar Nori
• [PATCH v7 1/5] mmc: davinci: allow driver to work without DMA resource   Sekhar Nori
• [PATCH v7 0/5] Add DT support for davinci_mmc driver   Sekhar Nori
• [PATCH v2] ARM: davinci: use is IS_ENABLED macro   Sekhar Nori
• [PATCH] ARM: davinci: remove test for undefined Kconfig macro   Sekhar Nori
• [PATCH v4 0/5] Enable SPI flash support on da850-evm DT kernel   Sekhar Nori
• [Query] PM runtime API   Sekhar Nori
• [Query] PM runtime API   Sekhar Nori
• [PATCH v7 0/5] Add DT support for davinci_mmc driver   Sekhar Nori
• [PATCH v9 0/9] DMA Engine support for AM33XX   Sekhar Nori
• [PATCH v3 0/3] Platform support for EHRPWM & ECAP devices in DAVINCI.   Sekhar Nori
• [PATCH 6/9] ARM: davinci: cpuidle: fix wrong enter function   Sekhar Nori
• [PATCH v7 1/2] ARM: davinci: dm355: add support for v4l2 video display   Sekhar Nori
• [PATCH v7 2/2] ARM: davinci: dm355 EVM: add support for VPBE display   Sekhar Nori
• [PATCH v8 1/2] ARM: davinci: dm365: add support for v4l2 video display   Sekhar Nori
• [PATCH v8 2/2] ARM: davinci: dm365 EVM: add support for VPBE display   Sekhar Nori
• [GIT PULL 1/3] DaVinci SoC updates for v3.10   Sekhar Nori
• [GIT PULL 2/3] DaVinci DT updates for v3.10   Sekhar Nori
• [GIT PULL 3/3] DaVinci board updates for v3.10   Sekhar Nori
• [PATCH v9 0/6] ARM: davinci: remoteproc support   Sekhar Nori
• [PATCH v2 1/3] media: davinci: vpss: enable vpss clocks   Sekhar Nori
• [PATCH v8 0/2] ARM: davinci: dm355: add support for vpbe display   Sekhar Nori
• [PATCH v8 0/2] ARM: davinci: dm355: add support for vpbe display   Sekhar Nori
• [PATCH v2 1/3] media: davinci: vpss: enable vpss clocks   Sekhar Nori
• [PATCH v3 3/3] ARM: davinci: da850: add EHRPWM & ECAP DT node   Sekhar Nori
• [PATCH v3 2/3] media: davinci: vpbe: venc: move the enabling of vpss clocks to driver   Sekhar Nori
• [PATCH v8 0/2] ARM: davinci: dm355: add support for vpbe display   Sekhar Nori
• [PATCH v3 3/3] ARM: davinci: da850: add EHRPWM & ECAP DT node   Sekhar Nori
• [PATCH v9 1/2] ARM: davinci: dm365: add support for v4l2 video display   Sekhar Nori
• [PATCH v3 3/3] ARM: davinci: da850: add EHRPWM & ECAP DT node   Sekhar Nori
• [PATCH 0/4] ARM: davinci: sparse warning fixes   Sekhar Nori
• [PATCH 1/4] ARM: davinci: da850 evm: fix const qualifier placement   Sekhar Nori
• [PATCH 2/4] ARM: davinci: da8xx dt: make file local symbols static   Sekhar Nori
• [PATCH 3/4] ARM: davinci: sram.c: fix incorrect type in assignment   Sekhar Nori
• [PATCH 4/4] ARM: davinci: ensure global variables are declared   Sekhar Nori
• [PATCH v4] ARM: davinci: da850: add EHRPWM & ECAP DT node   Sekhar Nori
• [PATCH v8 1/2] ARM: davinci: dm355: add support for v4l2 video display   Sekhar Nori
• [PATCH] ARM: daVinci: dm644x/dm355/dm365: replace V4L2_STD_525_60/625_50 with V4L2_STD_NTSC/PAL   Sekhar Nori
• [PATCH v5] ARM: davinci: da850: add EHRPWM & ECAP DT node   Sekhar Nori
• [PATCH v5 0/5] Patch enables support for m25p64 SPI flash support on da850-EVM.   Sekhar Nori
• [PATCH 0/4] ARM: davinci: sparse warning fixes   Sekhar Nori
• [GIT PULL 1/3] ARM: davinci: DT updates for v3.10 (part 2)   Sekhar Nori
• [GIT PULL 2/3] ARM: davinci: SoC updates for v3.10 (part 2)   Sekhar Nori
• [GIT PULL 3/3] ARM: davinci: board updates for v3.10 (part 2)   Sekhar Nori
• [GIT PULL 2/3] ARM: davinci: SoC updates for v3.10 (part 2)   Sekhar Nori
• [V3 patch 18/19] ARM: davinci: cpuidle: use init/exit common routine   Sekhar Nori
• [PATCH v5 0/5] Patch enables support for m25p64 SPI flash support on da850-EVM.   Sekhar Nori
• [PATCH 0/4] ARM: davinci: fix UART clock enabling   Sekhar Nori
• [GIT PULL 2/3] ARM: davinci: SoC updates for v3.10 (part 2)   Sekhar Nori
• [GIT PULL v2 1/3] ARM: davinci: DT updates for v3.10 (part 2)   Sekhar Nori
• [GIT PULL v2 2/3] ARM: davinci: SoC updates for v3.10 (part 2)   Sekhar Nori
• [GIT PULL v2 3/3] ARM: davinci: board updates for v3.10 (part 2)   Sekhar Nori
• [PATCH v3 0/6] Generic PHY Framework   Sekhar Nori
• [PATCH 1/4] ARM: davinci: uart: move to dev_id based clk_get   Sekhar Nori
• [v2,1/3] ARM: dts: AM33XX: Add ELM node   Sekhar Nori
• [v2, 3/3] ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm   Sekhar Nori
• [PATCH v10 0/12] Palmas updates   Samuel Ortiz
• [PATCH v10 03/12] mfd: palmas add variant and OTP detection   Samuel Ortiz
• [PATCH v4 04/14] mfd: Add Samsung PWM/timer master driver   Samuel Ortiz
• [PATCH 00/14] Ux500 multiplatform v2   Samuel Ortiz
• [PATCH 00/14] Ux500 multiplatform v2   Samuel Ortiz
• [GIT PULL] AB8500 Power and MFD related updates   Samuel Ortiz
• [GIT PULL] AB8500 Power and MFD related updates   Samuel Ortiz
• [GIT PULL] ux500 multiplatform tags   Samuel Ortiz
• [PATCH v10 02/12] mfd: palmas: is_palmas_charger needed by multiple drivers   Samuel Ortiz
• [PATCH v10 0/12] Palmas updates   Samuel Ortiz
• [PATCH 08/10] drivers: mfd: use module_platform_driver_probe()   Samuel Ortiz
• [PATCH v2] mfd: remove twelve unused Kconfig symbols   Samuel Ortiz
• [PATCH v2] clk: add LP8788 clock driver   Samuel Ortiz
• [PATCH] mfd: ab8500-core: Ignore masked out interrupts   Samuel Ortiz
• [PATCH] mfd: ab8500-core: Add of_compatilbe property for ab8500-usb   Samuel Ortiz
• [PATCH 1/2] mfd: db8500-prcmu: Return early if the TCPM cannot be located   Samuel Ortiz
• [PATCH 2/2] mfd: db8500-prcmu: Support platform dependant device selection   Samuel Ortiz
• [PATCH 3/3] mfd: ab8500: sysctrl: Initialize driver at arch_initcall   Samuel Ortiz
• [PATCH] mfd: vexpress: Give the "leds-gpio" device a real parent   Samuel Ortiz
• [PATCH 2/2] mfd: db8500-prcmu: Support platform dependant device selection   Samuel Ortiz
• [PATCH 2/2 v2] mfd: db8500-prcmu: Support platform dependant device selection   Samuel Ortiz
• [PATCH v2] UCB1400: Pass ucb1400-gpio data through ac97 bus   Samuel Ortiz
• [PATCH 20/21] MFD: ab8500: export ab8500_gpadc_sw_hw_convert properly   Samuel Ortiz
• [PATCH v2] mfd: vexpress: Handle pending config transactions   Samuel Ortiz
• [PATCHv3 00/14] drivers: mailbox: framework creation   Loic PALLARDY
• [PATCHv3 00/14] drivers: mailbox: framework creation   Loic PALLARDY
• [PATCHv3 00/14] drivers: mailbox: framework creation   Loic PALLARDY
• [PATCHv2 1/6] video: vt8500: Make wmt_ge_rops optional   Jean-Christophe PLAGNIOL-VILLARD
• [PATCHv2 6/6] video: fb: vt8500: Convert framebuffer drivers to standardized binding   Jean-Christophe PLAGNIOL-VILLARD
• [PATCHv3 0/6] fb: vt8500: patches for 3.10   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: at91/tc: fix clock source id for tc block > 1   Jean-Christophe PLAGNIOL-VILLARD
• [RFC 1/5] ARM: at91: add general purpose backup register (GPBR) support   Jean-Christophe PLAGNIOL-VILLARD
• [RFC 2/5] ARM: at91/dts: add general purpose backup register (GPBR) support   Jean-Christophe PLAGNIOL-VILLARD
• [RFC 4/5] RTC: rtc-at91sam9: add device-tree support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 2/2] video: imxfb: Add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [RFC 4/5] RTC: rtc-at91sam9: add device-tree support   Jean-Christophe PLAGNIOL-VILLARD
• [RFC 1/5] ARM: at91: add general purpose backup register (GPBR) support   Jean-Christophe PLAGNIOL-VILLARD
• [RFC v2 PATCH] at_hdmac: move to generic DMA binding   Jean-Christophe PLAGNIOL-VILLARD
• [RFC 4/5] RTC: rtc-at91sam9: add device-tree support   Jean-Christophe PLAGNIOL-VILLARD
• [RFC 4/5] RTC: rtc-at91sam9: add device-tree support   Jean-Christophe PLAGNIOL-VILLARD
• [RFC 4/5] RTC: rtc-at91sam9: add device-tree support   Jean-Christophe PLAGNIOL-VILLARD
• [GIT PULL] at91: DT changes for 3.10 #2   Jean-Christophe PLAGNIOL-VILLARD
• [RFC v2 PATCH] at_hdmac: move to generic DMA binding   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] ARM: boot/dts/Makefile: drop '\'   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] ARM: at91: move dts to subdir   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] ARM: at91: move dts to subdir   Jean-Christophe PLAGNIOL-VILLARD
• [RFC 1/5] ARM: at91: add general purpose backup register (GPBR) support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/8] video: atmel_lcdfb: fix platform data struct   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/8] video: atmel_lcdfb: introduce atmel_lcdfb_power_control   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/8] video: atmel_lcdfb: pass the pdata as params   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/8] video: atmel_lcdfb: add device tree suport   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/8] ARM: at91: sam9g45: add lcd support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/8] ARM: at91: sam9263: add fb dt support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/8] ARM: at91: at9sam9m10g45ek: add dt lcd support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/8] ARM: at91: sam9263ek: add dt lcd support   Jean-Christophe PLAGNIOL-VILLARD
• [rtc-linux] Re: [PATCH v2 0/5] ARM: at91: fix hanged boot   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] ARM: remove all trivial init_machine callbacks   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/3] ARM: at91: move to generic DMA device tree bindings   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 2/2] video: imxfb: Add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 2/2] video: imxfb: Add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [RFC patch 1/2] ARM: at91: cpuidle: encapsulate the standby code   Jean-Christophe PLAGNIOL-VILLARD
• [RFC patch 2/2] ARM: at91: cpuidle: move the driver to drivers/cpuidle directory   Jean-Christophe PLAGNIOL-VILLARD
• [RFC patch 2/2] ARM: at91: cpuidle: move the driver to drivers/cpuidle directory   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/8] video: atmel_lcdfb: add device tree suport   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/8] ARM: at91: sam9263: add fb dt support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/8] ARM: at91: sam9263: add fb dt support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] ARM: at91sam9260: dt: uart1 fix pinctrl typo   Jean-Christophe PLAGNIOL-VILLARD
• [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig   Jean-Christophe PLAGNIOL-VILLARD
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4 2/2] video: imxfb: Add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] ARM: at91: at91sam9x5 RTC is not compatible with at91rm9200 one   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4] ARM: nomadik: register clocksource from device tree   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4 2/2] video: imxfb: Add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH v2 03/13] ARM: mach-at91: cpus/cpu node dts updates   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH v2 03/13] ARM: mach-at91: cpus/cpu node dts updates   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH v2 03/13] ARM: mach-at91: cpus/cpu node dts updates   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] ARM: at91: dt: add pinctrl pre-processor define   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] ARM: at91: dt: add AIC pre-processor define   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] ARM: Kconfig: let ARM9TDMI and ARM7TDMI invisible.   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH v3 02/17] Documentation: devicetree: arm: cpus/cpu nodes bindings updates   Jean-Christophe PLAGNIOL-VILLARD
• [V2 PATCH] cpuidle: add maintainer entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v5 2/2] video: imxfb: Add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 0/2] video: imxfb DT support   Markus Pargmann
• [PATCH v3 1/2] imxfb: Set alpha value of the framebuffer   Markus Pargmann
• [PATCH v3 2/2] video: imxfb: Add DT support   Markus Pargmann
• [PATCH v2 00/11] ASoC: fsl-ssi: ac97-slave support   Markus Pargmann
• [PATCH v2 01/11] ASoC: phycore-ac97: Add DT support   Markus Pargmann
• [PATCH v2 02/11] ASoC: imx-pcm-dma: Add support for DMA init by device node   Markus Pargmann
• [PATCH v2 03/11] ASoC: imx-pcm-fiq: Introduce pcm-fiq-params   Markus Pargmann
• [PATCH v2 04/11] ASoC: fsl-ssi: Add SACNT definitions   Markus Pargmann
• [PATCH v2 05/11] ASoC: fsl-ssi: Add support for imx-pcm-fiq   Markus Pargmann
• [PATCH v2 06/11] ASoC: fsl-ssi: Setup generic imx dma params   Markus Pargmann
• [PATCH v2 07/11] ARM: imx: Export ac97 reset functions   Markus Pargmann
• [PATCH v2 08/11] ASoC: fsl-ssi: imx ac97 support   Markus Pargmann
• [PATCH v2 09/11] ASoC: fsl: Kconfig: Use fsl-ssi for phycore-ac97   Markus Pargmann
• [PATCH v2 10/11] ASoC: fsl: Move fsl-ssi binding doc to sound/   Markus Pargmann
• [PATCH v2 11/11] ASoC: fsl: Update fsl-ssi binding doc   Markus Pargmann
• [PATCH] ARM: dts: imx51 cpu node   Markus Pargmann
• [alsa-devel] [PATCH v2 00/11] ASoC: fsl-ssi: ac97-slave support   Markus Pargmann
• [PATCH v2 01/11] ASoC: phycore-ac97: Add DT support   Markus Pargmann
• [PATCH v2 08/11] ASoC: fsl-ssi: imx ac97 support   Markus Pargmann
• [alsa-devel] [PATCH v2 00/11] ASoC: fsl-ssi: ac97-slave support   Markus Pargmann
• [PATCH v2 06/11] ASoC: fsl-ssi: Setup generic imx dma params   Markus Pargmann
• [alsa-devel] [PATCH v2 00/11] ASoC: fsl-ssi: ac97-slave support   Markus Pargmann
• [PATCH v2 05/11] ASoC: fsl-ssi: Add support for imx-pcm-fiq   Markus Pargmann
• [PATCH v3 00/15] ASoC: fsl-ssi: ac97-slave support   Markus Pargmann
• [PATCH v3 01/15] ASoC: imx-ssi: Fix includes   Markus Pargmann
• [PATCH v3 02/15] ASoC: dmaengine-pcm: Replace of specific helper function   Markus Pargmann
• [PATCH v3 03/15] ASoC: dmaengine-pcm: Fix function name   Markus Pargmann
• [PATCH v3 04/15] ASoC: dmaengine-pcm: Fix pcm_request_chan function name   Markus Pargmann
• [PATCH v3 05/15] ASoC: phycore-ac97: Add DT support   Markus Pargmann
• [PATCH v3 06/15] ASoC: imx-pcm-dma: DT support   Markus Pargmann
• [PATCH v3 07/15] ASoC: imx-pcm-fiq: Introduce pcm-fiq-params   Markus Pargmann
• [PATCH v3 08/15] ASoC: fsl-ssi: Add SACNT definitions   Markus Pargmann
• [PATCH v3 09/15] ASoC: fsl-ssi: Add support for imx-pcm-fiq   Markus Pargmann
• [PATCH v3 10/15] ASoC: fsl-ssi: Use generic DMA bindings if possible   Markus Pargmann
• [PATCH v3 11/15] ARM: imx: Export ac97 reset functions   Markus Pargmann
• [PATCH v3 12/15] ASoC: fsl-ssi: imx ac97 support   Markus Pargmann
• [PATCH v3 13/15] ASoC: fsl: Kconfig: Use fsl-ssi for phycore-ac97   Markus Pargmann
• [PATCH v3 14/15] ASoC: fsl: Move fsl-ssi binding doc to sound/   Markus Pargmann
• [PATCH v3 15/15] ASoC: fsl: Update fsl-ssi binding doc   Markus Pargmann
• [PATCH v2 05/11] ASoC: fsl-ssi: Add support for imx-pcm-fiq   Markus Pargmann
• [PATCH v3 2/2] video: imxfb: Add DT support   Markus Pargmann
• [PATCH v2 05/11] ASoC: fsl-ssi: Add support for imx-pcm-fiq   Markus Pargmann
• [PATCH v2 05/11] ASoC: fsl-ssi: Add support for imx-pcm-fiq   Markus Pargmann
• [PATCH v3 2/2] video: imxfb: Add DT support   Markus Pargmann
• [PATCH v3 05/15] ASoC: phycore-ac97: Add DT support   Markus Pargmann
• [PATCH v4 00/10] ASoC: fsl-ssi: ac97-slave support   Markus Pargmann
• [PATCH v4 01/10] ASoC: phycore-ac97: Add DT support   Markus Pargmann
• [PATCH v4 02/10] ASoC: imx-pcm-dma: DT support   Markus Pargmann
• [PATCH v4 03/10] ASoC: imx-pcm-fiq: Introduce pcm-fiq-params   Markus Pargmann
• [PATCH v4 04/10] ASoC: fsl-ssi: Add support for imx-pcm-fiq   Markus Pargmann
• [PATCH v4 05/10] ASoC: fsl-ssi: Use generic DMA bindings if possible   Markus Pargmann
• [PATCH v4 06/10] ARM: imx: Export ac97 reset functions   Markus Pargmann
• [PATCH v4 07/10] ASoC: fsl-ssi: imx ac97 support   Markus Pargmann
• [PATCH v4 08/10] ASoC: fsl: Kconfig: Use fsl-ssi for phycore-ac97   Markus Pargmann
• [PATCH v4 09/10] ASoC: fsl: Move fsl-ssi binding doc to sound/   Markus Pargmann
• [PATCH v4 10/10] ASoC: fsl: Update fsl-ssi binding doc   Markus Pargmann
• [PATCH v4 0/2] video: imxfb DT support   Markus Pargmann
• [PATCH v4 1/2] imxfb: Set alpha value of the framebuffer   Markus Pargmann
• [PATCH v4 2/2] video: imxfb: Add DT support   Markus Pargmann
• [PATCH RESEND v5 0/2] dma: imx-dma: OFTree support   Markus Pargmann
• [PATCH RESEND v5 1/2] dma: imx-dma: Add oftree support   Markus Pargmann
• [PATCH RESEND v5 2/2] DMA: imx-dma: imxdma->dev used uninitialized   Markus Pargmann
• [alsa-devel] [PATCH v4 02/10] ASoC: imx-pcm-dma: DT support   Markus Pargmann
• [PATCH RESEND v5 1/2] dma: imx-dma: Add oftree support   Markus Pargmann
• [PATCH v4 2/2] video: imxfb: Add DT support   Markus Pargmann
• [PATCH RESEND v5 0/2] dma: imx-dma: OFTree support   Markus Pargmann
• [PATCH v6 0/2] dma: imx-dma: OFTree support   Markus Pargmann
• [PATCH v6 1/2] dma: imx-dma: Add oftree support   Markus Pargmann
• [PATCH v6 2/2] DMA: imx-dma: imxdma->dev used uninitialized   Markus Pargmann
• [PATCH 0/2] drivers/video: mxs-fb: build fixes   Markus Pargmann
• [PATCH 1/2] drivers/video: Kconfig, fix mxsfb build   Markus Pargmann
• [PATCH 2/2] drivers/video: mxs-fb: Fix build, use renamed function   Markus Pargmann
• [PATCH 0/2] drivers/video: mxs-fb: build fixes   Markus Pargmann
• [PATCH 1/2] drivers/video: Kconfig, fix mxsfb build   Markus Pargmann
• [PATCH 2/2] drivers/video: mxs-fb: Fix build, use renamed function   Markus Pargmann
• [PATCH 0/2] drivers/video: mxs-fb: build fixes   Markus Pargmann
• [PATCH v4 2/2] video: imxfb: Add DT support   Markus Pargmann
• [PATCH v5 0/2] video: imxfb DT support   Markus Pargmann
• [PATCH v5 1/2] imxfb: Set alpha value of the framebuffer   Markus Pargmann
• [PATCH v5 2/2] video: imxfb: Add DT support   Markus Pargmann
• [PATCH v5 00/10] ASoC: fsl-ssi: ac97-slave support   Markus Pargmann
• [PATCH v5 01/10] ASoC: phycore-ac97: Add DT support   Markus Pargmann
• [PATCH v5 02/10] ASoC: imx-pcm-dma: DT support   Markus Pargmann
• [PATCH v5 03/10] ASoC: imx-pcm-fiq: Introduce pcm-fiq-params   Markus Pargmann
• [PATCH v5 04/10] ASoC: fsl-ssi: Add support for imx-pcm-fiq   Markus Pargmann
• [PATCH v5 05/10] ASoC: fsl-ssi: Use generic DMA bindings if possible   Markus Pargmann
• [PATCH v5 06/10] ARM: imx: Export ac97 reset functions   Markus Pargmann
• [PATCH v5 07/10] ASoC: fsl-ssi: imx ac97 support   Markus Pargmann
• [PATCH v5 08/10] ASoC: fsl: Kconfig: Use fsl-ssi for phycore-ac97   Markus Pargmann
• [PATCH v5 09/10] ASoC: fsl: Move fsl-ssi binding doc to sound/   Markus Pargmann
• [PATCH v5 10/10] ASoC: fsl: Update fsl-ssi binding doc   Markus Pargmann
• [PATCH v5 01/10] ASoC: phycore-ac97: Add DT support   Markus Pargmann
• [PATCH v5 07/10] ASoC: fsl-ssi: imx ac97 support   Markus Pargmann
• [PATCH 0/2] Support device_prep_dma_sg for pl330   Chanho Park
• [PATCH 1/2] dma: pl330: split off common code to give back descriptors   Chanho Park
• [PATCH 2/2] dma: pl330: add pl330_prep_dma_sg to transfer from sglist to sglist   Chanho Park
• [PATCHv2] arm: mm: lockless get_user_pages_fast support   Chanho Park
• [PATCH] ARM: kprobes: fix test coverage missing failures   Keun-O Park
• [PATCH] ARM: kprobes: fix test coverage missing failures   Keun-O Park
• [PATCH 02/30] ARM: exynos: prepare for sparse IRQ   Kyungmin Park
• [PATCH 15/30] mtd: onenand/samsung: make regs-onenand.h file local   Kyungmin Park
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Anup Patel
• [PATCH] ARM: KVM: Allow host virtual timer irq number to be different from guest virtual timer irq number   Anup Patel
• [PATCH] ARM: KVM: Allow host virtual timer irq number to be different from guest virtual timer irq number   Anup Patel
• [PATCH V2] ARM: KVM: Allow host virtual timer irq number to be different from guest virtual timer irq number   Anup Patel
• [PATCH V2] ARM: KVM: Allow host virtual timer irq number to be different from guest virtual timer irq number   Anup Patel
• [PATCH 0/2] Early printk support for virtio console devices.   Anup Patel
• [PATCH 0/2] Early printk support for virtio console devices.   Anup Patel
• [PATCH V3] ARM: KVM: Allow host virtual timer irq number to be different from guest virtual timer irq number   Anup Patel
• [PATCH] arm64: KVM: Add kvm_target_timer_irq() for arch_timer   Anup Patel
• [PATCH V3] ARM: KVM: Allow host virtual timer irq number to be different from guest virtual timer irq number   Anup Patel
• [PATCH] arm64: KVM: Add kvm_target_timer_irq() for arch_timer   Anup Patel
• [PATCH V3] ARM: KVM: Allow host virtual timer irq number to be different from guest virtual timer irq number   Anup Patel
• [PATCH] ARM: KVM: Allow host virt timer irq to be different from guest timer virt irq   Anup Patel
• [PATCH] arm64: KVM: Reset arch_timer upon vcpu reset   Anup Patel
• [PATCH] ARM: KVM: Allow host virt timer irq to be different from guest timer virt irq   Anup Patel
• [PATCH] ARM: KVM: Allow host virt timer irq to be different from guest timer virt irq   Anup Patel
• [PATCH] arm64: KVM: Reset arch_timer upon vcpu reset   Anup Patel
• [PATCH V2] ARM: KVM: Allow host virt timer irq to be different from guest timer virt irq   Anup Patel
• [PATCH V2] arm64: KVM: Reset arch_timer upon vcpu reset   Anup Patel
• [PATCH V2] ARM: KVM: Allow host virt timer irq to be different from guest timer virt irq   Anup Patel
• [PATCH V2] arm64: KVM: Reset arch_timer upon vcpu reset   Anup Patel
• [PATCH V3] ARM: KVM: Allow host virt timer irq to be different from guest timer virt irq   Anup Patel
• [PATCH V3] arm64: KVM: Reset arch_timer upon vcpu reset   Anup Patel
• linux-next ARM multi-platform randconfig errors   Mikulas Patocka
• [PATCH] Revert "OMAP/serial: Fix incorrect Rx FIFO threshold setting, LSR validation on Tx, and Tx FIFO IRQ generation"   Alexey Pelykh
• [PATCH] Revert "OMAP/serial: Fix incorrect Rx FIFO threshold setting, LSR validation on Tx, and Tx FIFO IRQ generation"   Alexey Pelykh
• [PATCH] Revert "OMAP/serial: Fix incorrect Rx FIFO threshold setting, LSR validation on Tx, and Tx FIFO IRQ generation"   Alexey Pelykh
• [PATCH] Revert "OMAP/serial: Fix incorrect Rx FIFO threshold setting, LSR validation on Tx, and Tx FIFO IRQ generation"   Alexey Pelykh
• [PATCH] Revert "OMAP/serial: Fix incorrect Rx FIFO threshold setting, LSR validation on Tx, and Tx FIFO IRQ generation"   Alexey Pelykh
• [PATCH] Revert "OMAP/serial: Fix incorrect Rx FIFO threshold setting, LSR validation on Tx, and Tx FIFO IRQ generation"   Alexey Pelykh
• [PATCH] Revert "OMAP/serial: Fix incorrect Rx FIFO threshold setting, LSR validation on Tx, and Tx FIFO IRQ generation"   Alexey Pelykh
• [PATCH] OMAP/serial: Revert bad fix of Rx FIFO threshold granularity   Alexey Pelykh
• [PATCH] Revert "OMAP/serial: Fix incorrect Rx FIFO threshold setting, LSR validation on Tx, and Tx FIFO IRQ generation"   Alexey Pelykh
• [PATCH] Revert "OMAP/serial: Fix incorrect Rx FIFO threshold setting, LSR validation on Tx, and Tx FIFO IRQ generation"   Alexey Pelykh
• [PATCH] Revert "OMAP/serial: Fix incorrect Rx FIFO threshold setting, LSR validation on Tx, and Tx FIFO IRQ generation"   Alexey Pelykh
• [PATCH] ARM: KVM: Add missing break;   Joe Perches
• [PATCH] arm: mvebu: Fix the memory size on the Mirabox   Thomas Petazzoni
• [RFC PATCHv1 2/5] bus: mvebu: fix mistake in PCIe window target attribute for Kirkwood   Thomas Petazzoni
• [RFC PATCHv1 2/5] bus: mvebu: fix mistake in PCIe window target attribute for Kirkwood   Thomas Petazzoni
• [PATCHv7 00/17] PCIe support for the Armada 370 and Armada XP SoCs   Thomas Petazzoni
• [RFCv1 00/11] MSI support for Marvell EBU PCIe driver   Thomas Petazzoni
• mvebu-mbus: defining a DT binding   Thomas Petazzoni
• [PATCH v3] of/pci: Provide support for parsing PCI DT ranges property   Thomas Petazzoni
• [PATCH v3] of/pci: Provide support for parsing PCI DT ranges property   Thomas Petazzoni
• mvebu-mbus: defining a DT binding   Thomas Petazzoni
• [PATCHv7 06/17] clk: mvebu: create parent-child relation for PCIe clocks on Armada 370   Thomas Petazzoni
• [PATCHv7 07/17] clk: mvebu: add more PCIe clocks for Armada XP   Thomas Petazzoni
• [PATCHv7 08/17] pci: PCIe driver for Marvell Armada 370/XP systems   Thomas Petazzoni
• [PATCHv7 08/17] pci: PCIe driver for Marvell Armada 370/XP systems   Thomas Petazzoni
• [PATCHv7 08/17] pci: PCIe driver for Marvell Armada 370/XP systems   Thomas Petazzoni
• [PATCHv7 08/17] pci: PCIe driver for Marvell Armada 370/XP systems   Thomas Petazzoni
• [PATCHv8 00/19] PCIe support for the Armada 370 and Armada XP SoCs   Thomas Petazzoni
• [PATCHv8 01/19] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC   Thomas Petazzoni
• [PATCHv8 02/19] of/pci: Provide support for parsing PCI DT ranges property   Thomas Petazzoni
• [PATCHv8 03/19] of/pci: mips: convert to common of_pci_range_parser   Thomas Petazzoni
• [PATCHv8 04/19] of/pci: Add of_pci_get_devfn() function   Thomas Petazzoni
• [PATCHv8 05/19] of/pci: Add of_pci_parse_bus_range() function   Thomas Petazzoni
• [PATCHv8 06/19] pci: infrastructure to add drivers in drivers/pci/host   Thomas Petazzoni
• [PATCHv8 07/19] arm: pci: add a align_resource hook   Thomas Petazzoni
• [PATCHv8 08/19] clk: mvebu: create parent-child relation for PCIe clocks on Armada 370   Thomas Petazzoni
• [PATCHv8 09/19] clk: mvebu: add more PCIe clocks for Armada XP   Thomas Petazzoni
• [PATCHv8 10/19] pci: PCIe driver for Marvell Armada 370/XP systems   Thomas Petazzoni
• [PATCHv8 11/19] arm: mvebu: PCIe support is now available on mvebu   Thomas Petazzoni
• [PATCHv8 12/19] arm: mvebu: add PCIe Device Tree informations for Armada 370   Thomas Petazzoni
• [PATCHv8 13/19] arm: mvebu: add PCIe Device Tree informations for Armada XP   Thomas Petazzoni
• [PATCHv8 14/19] arm: mvebu: PCIe Device Tree informations for OpenBlocks AX3-4   Thomas Petazzoni
• [PATCHv8 15/19] arm: mvebu: PCIe Device Tree informations for Armada XP DB   Thomas Petazzoni
• [PATCHv8 16/19] arm: mvebu: PCIe Device Tree informations for Armada 370 Mirabox   Thomas Petazzoni
• [PATCHv8 17/19] arm: mvebu: PCIe Device Tree informations for Armada 370 DB   Thomas Petazzoni
• [PATCHv8 18/19] arm: mvebu: PCIe Device Tree informations for Armada XP GP   Thomas Petazzoni
• [PATCHv8 19/19] arm: mvebu: update defconfig with PCI and USB support   Thomas Petazzoni
• [PATCHv8 10/19] pci: PCIe driver for Marvell Armada 370/XP systems   Thomas Petazzoni
• [PATCHv1 0/5] Marvell EBU irqchip improvements   Thomas Petazzoni
• [PATCHv1 1/5] ARM: mvebu: move L2 cache initialization in init_early()   Thomas Petazzoni
• [PATCHv1 2/5] irqchip: move IRQ driver for Armada 370/XP   Thomas Petazzoni
• [PATCHv1 3/5] irqchip: armada-370-xp: move IRQ handler to avoid forward declaration   Thomas Petazzoni
• [PATCHv1 4/5] irqchip: armada-370-xp: slightly cleanup irq controller driver   Thomas Petazzoni
• [PATCHv1 5/5] ARM: mvebu: do not duplicate the mpic alias   Thomas Petazzoni
• [PATCHv1 0/5] Marvell EBU irqchip improvements   Thomas Petazzoni
• [PATCHv1 0/5] Marvell EBU irqchip improvements   Thomas Petazzoni
• [PATCH v5 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC   Thomas Petazzoni
• [PATCH v5 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC   Thomas Petazzoni
• [PATCHv2 00/10] Use the mvebu PCIe driver on Kirkwood   Thomas Petazzoni
• [PATCHv2 01/10] pci: mvebu: enable driver usage on Kirkwood   Thomas Petazzoni
• [PATCHv2 02/10] bus: mvebu: fix mistake in PCIe window target attribute for Kirkwood   Thomas Petazzoni
• [PATCHv2 03/10] arm: kirkwood: move PCIe window init to legacy driver   Thomas Petazzoni
• [PATCHv2 04/10] arm: kirkwood: add SoC-level Device Tree data for PCIe interfaces   Thomas Petazzoni
• [PATCHv2 05/10] arm: kirkwood: convert Iomega Iconnect to use DT for the PCIe interface   Thomas Petazzoni
• [PATCHv2 06/10] arm: kirkwood: convert MPL CEC4 to use DT for the PCIe interface   Thomas Petazzoni
• [PATCHv2 07/10] arm: kirkwood: convert ZyXEL NSA310 to use DT for the PCIe interface   Thomas Petazzoni
• [PATCHv2 08/10] arm: kirkwood: convert QNAP TS219 to use DT for the PCIe interface   Thomas Petazzoni
• [PATCHv2 09/10] arm: kirkwood: convert db-88f6281 to the Device Tree   Thomas Petazzoni
• [PATCHv2 10/10] arm: kirkwood: update defconfig with PCIe driver and board updates   Thomas Petazzoni
• [PATCH v5 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC   Thomas Petazzoni
• [PATCHv2 08/10] arm: kirkwood: convert QNAP TS219 to use DT for the PCIe interface   Thomas Petazzoni
• [PATCHv2 04/10] arm: kirkwood: add SoC-level Device Tree data for PCIe interfaces   Thomas Petazzoni
• [PATCHv3 00/10] Use the mvebu PCIe driver on Kirkwood   Thomas Petazzoni
• [PATCHv3 01/10] pci: mvebu: enable driver usage on Kirkwood   Thomas Petazzoni
• [PATCHv3 02/10] bus: mvebu: fix mistake in PCIe window target attribute for Kirkwood   Thomas Petazzoni
• [PATCHv3 03/10] arm: kirkwood: move PCIe window init to legacy driver   Thomas Petazzoni
• [PATCHv3 04/10] arm: kirkwood: add SoC-level Device Tree data for PCIe interfaces   Thomas Petazzoni
• [PATCHv3 05/10] arm: kirkwood: convert Iomega Iconnect to use DT for the PCIe interface   Thomas Petazzoni
• [PATCHv3 06/10] arm: kirkwood: convert MPL CEC4 to use DT for the PCIe interface   Thomas Petazzoni
• [PATCHv3 07/10] arm: kirkwood: convert ZyXEL NSA310 to use DT for the PCIe interface   Thomas Petazzoni
• [PATCHv3 08/10] arm: kirkwood: convert QNAP TS219 to use DT for the PCIe interface   Thomas Petazzoni
• [PATCHv3 09/10] arm: kirkwood: convert db-88f6281 to the Device Tree   Thomas Petazzoni
• [PATCHv3 10/10] arm: kirkwood: update defconfig with PCIe driver and board updates   Thomas Petazzoni
• [PATCH 0/5 v2] mv643xx_eth: device tree bindings   Thomas Petazzoni
• [PATCH 0/5 v2] mv643xx_eth: device tree bindings   Thomas Petazzoni
• [PATCH v6 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC   Thomas Petazzoni
• [PATCHv8 00/19] PCIe support for the Armada 370 and Armada XP SoCs   Thomas Petazzoni
• [PATCHv8 00/19] PCIe support for the Armada 370 and Armada XP SoCs   Thomas Petazzoni
• [PATCH v6 0/3] of/pci: Provide common support for PCI DT parsing   Thomas Petazzoni
• [PATCHv3 00/10] Use the mvebu PCIe driver on Kirkwood   Thomas Petazzoni
• [GIT PULL] mvebu irqchip for v3.10   Thomas Petazzoni
• linux-next: build failure after merge of the arm-soc tree   Thomas Petazzoni
• [PATCH 1/3] mmc: mvsdio: Support inverted CD and WP GPIO lines   Thomas Petazzoni
• dma cache coherency on Armada XP dev board   Thomas Petazzoni
• [PATCH v3 1/3] ARM: davinci: clk framework support for enable/disable functionality   Philip, Avinash
• [PATCH v3 0/3] Platform support for EHRPWM & ECAP devices in DAVINCI.   Philip, Avinash
• [PATCH v3 0/3] Platform support for EHRPWM & ECAP devices in DAVINCI.   Philip, Avinash
• [PATCH v3 0/3] Platform support for EHRPWM & ECAP devices in DAVINCI.   Philip, Avinash
• [PATCH 0/2] Update device tree binding document for pwm-tiehrpwm & pwm-tiecap   Philip, Avinash
• [PATCH v3 3/3] ARM: davinci: da850: add EHRPWM & ECAP DT node   Philip, Avinash
• [PATCH v3 3/3] ARM: davinci: da850: add EHRPWM & ECAP DT node   Philip, Avinash
• [PATCH v3 3/3] ARM: davinci: da850: add EHRPWM & ECAP DT node   Philip, Avinash
• [PATCH v3 3/3] ARM: davinci: da850: add EHRPWM & ECAP DT node   Philip, Avinash
• [PATCH v4] ARM: davinci: da850: add EHRPWM & ECAP DT node   Philip, Avinash
• [PATCH 2/5] spi/mxs: Fix chip select control bits in DMA mode   Trent Piepho
• [PATCH 4/5] spi/mxs: Remove bogus setting of ssp clk rate field   Trent Piepho
• [PATCH 2/5] spi/mxs: Fix chip select control bits in DMA mode   Trent Piepho
• [PATCH 4/5] spi/mxs: Remove bogus setting of ssp clk rate field   Trent Piepho
• [PATCH 1/5] spi/mxs: Fix extra CS pulses and read mode in multi-transfer messages   Trent Piepho
• [PATCH 2/5] spi/mxs: Fix chip select control bits in DMA mode   Trent Piepho
• [PATCH 1/5] spi/mxs: Fix extra CS pulses and read mode in multi-transfer messages   Trent Piepho
• [PATCH V2 01/12] spi/mxs: Always set LOCK_CS   Trent Piepho
• [PATCH V2 02/12] spi/mxs: Remove mxs_spi_enable and mxs_spi_disable   Trent Piepho
• [PATCH V2 03/12] spi/mxs: Change flag arguments in txrx functions to bit flags   Trent Piepho
• [PATCH V2 04/12] spi/mxs: Fix extra CS pulses and read mode in multi-transfer messages   Trent Piepho
• [PATCH V2 05/12] spi/mxs: Fix chip select control bits in DMA mode   Trent Piepho
• [PATCH V2 06/12] spi/mxs: Remove full duplex check, spi core already does it   Trent Piepho
• [PATCH V2 07/12] spi/mxs: Remove bogus setting of ssp clk rate field   Trent Piepho
• [PATCH V2 08/12] spi/mxs: Fix race in setup method   Trent Piepho
• [PATCH V2 09/12] spi/mxs: Remove check of spi mode bits   Trent Piepho
• [PATCH V2 10/12] spi/mxs: Clean up setup_transfer function   Trent Piepho
• [PATCH V2 11/12] spi/mxs: Don't set clock for each xfer   Trent Piepho
• [PATCH V2 12/12] spi/mxs: Use u32 instead of uint32_t   Trent Piepho
• [PATCH 1/5] spi/mxs: Fix extra CS pulses and read mode in multi-transfer messages   Trent Piepho
• [PATCH V2 08/12] spi/mxs: Fix race in setup method   Trent Piepho
• [PATCH V2 08/12] spi/mxs: Fix race in setup method   Trent Piepho
• [PATCH V2 08/12] spi/mxs: Fix race in setup method   Trent Piepho
• v7_flush_kern_cache_louis flushes up to L2?   Lorenzo Pieralisi
• [RFC PATCH] ARM CCI support   Lorenzo Pieralisi
• [RFC PATCH] drivers: bus: add ARM CCI support   Lorenzo Pieralisi
• [RFC PATCH 01/11] Documentation: DT: arm: define CPU topology bindings   Lorenzo Pieralisi
• [RFC PATCH 01/11] Documentation: DT: arm: define CPU topology bindings   Lorenzo Pieralisi
• [RFC PATCH 01/11] Documentation: DT: arm: define CPU topology bindings   Lorenzo Pieralisi
• [RFC PATCH 01/11] Documentation: DT: arm: define CPU topology bindings   Lorenzo Pieralisi
• [PATCH v2 1/2] ARM: shmobile: r8a7740: Add Suspend-To-RAM A3SM   Lorenzo Pieralisi
• [RFC PATCH 01/11] Documentation: DT: arm: define CPU topology bindings   Lorenzo Pieralisi
• [RFC PATCH 0/2] ARM: DT cpu bindings updates   Lorenzo Pieralisi
• [RFC PATCH 1/2] ARM: DT: kernel: move temporary cpu map stack array to static data   Lorenzo Pieralisi
• [RFC PATCH 2/2] ARM: DT: kernel: DT cpu node bindings update   Lorenzo Pieralisi
• [RFC PATCH 2/2] ARM: DT: kernel: DT cpu node bindings update   Lorenzo Pieralisi
• [RFC PATCH 2/2] ARM: DT: kernel: DT cpu node bindings update   Lorenzo Pieralisi
• [RFC PATCH 2/2] ARM: DT: kernel: DT cpu node bindings update   Lorenzo Pieralisi
• [RFC PATCH 2/2] ARM: DT: kernel: DT cpu node bindings update   Lorenzo Pieralisi
• [RFC PATCH] drivers: bus: add ARM CCI support   Lorenzo Pieralisi
• [RFC PATCH v2 00/13] ARM: DT cpu bindings updates   Lorenzo Pieralisi
• [RFC PATCH v2 01/13] ARM: DT: kernel: move temporary cpu map stack array to static data   Lorenzo Pieralisi
• [RFC PATCH v2 02/13] ARM: mach-mv78xx0: cpus/cpu node dts updates   Lorenzo Pieralisi
• [RFC PATCH v2 03/13] ARM: mach-at91: cpus/cpu node dts updates   Lorenzo Pieralisi
• [RFC PATCH v2 04/13] ARM: mach-exynos: cpus/cpu nodes dts updates   Lorenzo Pieralisi
• [RFC PATCH v2 05/13] ARM: mach-imx: cpus/cpu nodes dts updates   Lorenzo Pieralisi
• [RFC PATCH v2 06/13] ARM: mach-lpc32xx: cpus/cpu nodes dts updates   Lorenzo Pieralisi
• [RFC PATCH v2 07/13] ARM: mach-omap2: cpus/cpu nodes dts updates   Lorenzo Pieralisi
• [RFC PATCH v2 08/13] ARM: mach-picoxcell: cpus/cpu nodes dts updates   Lorenzo Pieralisi
• [RFC PATCH v2 09/13] ARM: mach-shmobile: cpus/cpu nodes dts updates   Lorenzo Pieralisi
• [RFC PATCH v2 10/13] ARM: mach-spear: cpus/cpu nodes dts updates   Lorenzo Pieralisi
• [RFC PATCH v2 11/13] ARM: mach-sunxi: cpus/cpu nodes dts updates   Lorenzo Pieralisi
• [RFC PATCH v2 12/13] ARM: mach-vt8500: cpus/cpu nodes dts updates   Lorenzo Pieralisi
• [RFC PATCH v2 13/13] ARM: DT: kernel: DT cpu node bindings update   Lorenzo Pieralisi
• [RFC PATCH v2 00/13] ARM: DT cpu bindings updates   Lorenzo Pieralisi
• [RFC PATCH v2 12/13] ARM: mach-vt8500: cpus/cpu nodes dts updates   Lorenzo Pieralisi
• [RFC PATCH v2 12/13] ARM: mach-vt8500: cpus/cpu nodes dts updates   Lorenzo Pieralisi
• [RFC PATCH v2 12/13] ARM: mach-vt8500: cpus/cpu nodes dts updates   Lorenzo Pieralisi
• [RFC PATCH v2 00/13] ARM: DT cpu bindings updates   Lorenzo Pieralisi
• [RFC PATCH v2 03/13] ARM: mach-at91: cpus/cpu node dts updates   Lorenzo Pieralisi
• [RFC PATCH] drivers: bus: add ARM CCI support   Lorenzo Pieralisi
• [RFC PATCH v2 03/13] ARM: mach-at91: cpus/cpu node dts updates   Lorenzo Pieralisi
• [RFC PATCH v3 00/17] ARM: DT cpu bindings updates   Lorenzo Pieralisi
• [RFC PATCH v3 01/17] ARM: DT: kernel: move temporary cpu map stack array to static data   Lorenzo Pieralisi
• [RFC PATCH v3 02/17] Documentation: devicetree: arm: cpus/cpu nodes bindings updates   Lorenzo Pieralisi
• [RFC PATCH v3 03/17] ARM: dts: am33xx: cpus/cpu nodes dts updates   Lorenzo Pieralisi
• [RFC PATCH v3 04/17] ARM: dts: armada-370-xp: cpus/cpu node dts updates   Lorenzo Pieralisi
• [RFC PATCH v3 05/17] ARM: dts: at91: cpus/cpu node dts updates   Lorenzo Pieralisi
• [RFC PATCH v3 06/17] ARM: dts: exynos5440: cpus/cpu nodes dts updates   Lorenzo Pieralisi
• [RFC PATCH v3 07/17] ARM: dts: imx: cpus/cpu nodes dts updates   Lorenzo Pieralisi
• [RFC PATCH v3 08/17] ARM: dts: lpc32xx: cpus/cpu nodes dts updates   Lorenzo Pieralisi
• [RFC PATCH v3 09/17] ARM: dts: omap: cpus/cpu nodes dts updates   Lorenzo Pieralisi
• [RFC PATCH v3 10/17] ARM: dts: picoxcell: cpus/cpu nodes dts updates   Lorenzo Pieralisi
• [RFC PATCH v3 11/17] ARM: dts: prima2: cpus/cpu node dts updates   Lorenzo Pieralisi
• [RFC PATCH v3 12/17] ARM: dts: pxa2xx: cpus/cpu nodes dts updates   Lorenzo Pieralisi
• [RFC PATCH v3 13/17] ARM: dts: r8a7740: cpus/cpu nodes dts updates   Lorenzo Pieralisi
• [RFC PATCH v3 14/17] ARM: dts: sh7372: cpus/cpu nodes dts updates   Lorenzo Pieralisi
• [RFC PATCH v3 15/17] ARM: dts: spear: cpus/cpu nodes dts updates   Lorenzo Pieralisi
• [RFC PATCH v3 16/17] ARM: dts: sunxi: cpus/cpu nodes dts updates   Lorenzo Pieralisi
• [RFC PATCH v3 17/17] ARM: DT: kernel: DT cpus/cpu node bindings update   Lorenzo Pieralisi
• [RFC PATCH v3 07/17] ARM: dts: imx: cpus/cpu nodes dts updates   Lorenzo Pieralisi
• [RFC PATCH v3 02/17] Documentation: devicetree: arm: cpus/cpu nodes bindings updates   Lorenzo Pieralisi
• [RFC PATCH v3 02/17] Documentation: devicetree: arm: cpus/cpu nodes bindings updates   Lorenzo Pieralisi
• [PATCH 1/3] video: Make IPU KMS parse display-timings   Rogerio Pimentel
• [PATCH 2/3] ARM: dts: mx53qsb: Add support for parallel display   Rogerio Pimentel
• [PATCH 3/3] ARM: imx_v6_v7_defconfig: enable parallel display   Rogerio Pimentel
• [PATCH v2 1/4] imx-drm: parallel-display: Fix valid_mode checking   Rogerio Pimentel
• [PATCH v2 2/4] imx-drm: parallel-display: Make IPU KMS parse display-timings   Rogerio Pimentel
• [PATCH v2 3/4] ARM: dts: mx53qsb: Add support for parallel display   Rogerio Pimentel
• [PATCH v2 4/4] ARM: imx_v6_v7_defconfig: enable parallel display   Rogerio Pimentel
• [PATCH v2 3/4] ARM: dts: mx53qsb: Add support for parallel display   Rogerio Pimentel
• [PATCH 02/04] ARM: shmobile: r8a7779 pinmux platform device cleanup   Laurent Pinchart
• [PATCH 00/04] ARM: shmobile: pinmux platform device cleanups   Laurent Pinchart
• [RFC/PATCH 0/7] ARCH: shmobile: defconfig consolidation   Laurent Pinchart
• [RFC/PATCH 0/7] ARCH: shmobile: defconfig consolidation   Laurent Pinchart
• [RFC/PATCH 0/7] ARCH: shmobile: defconfig consolidation   Laurent Pinchart
• [PATCH v3] irqchip: renesas-intc-irqpin: DT binding for sense bitfield width   Laurent Pinchart
• [PATCH v3] irqchip: renesas-intc-irqpin: DT binding for sense bitfield width   Laurent Pinchart
• [PATCH v3] irqchip: renesas-intc-irqpin: DT binding for sense bitfield width   Laurent Pinchart
• [PATCH/RFC] ARM: shmobile: Disallow PINCTRL without GPIOLIB   Laurent Pinchart
• [PATCH V2] video: implement a simple framebuffer driver   Laurent Pinchart
• [PATCH V2] video: implement a simple framebuffer driver   Laurent Pinchart
• [PATCH v8 1/7] media: V4L2: add temporary clock helpers   Laurent Pinchart
• [PATCH v8 1/7] media: V4L2: add temporary clock helpers   Laurent Pinchart
• [PATCH] ARM: shmobile: lager: Add GPIO LEDs   Laurent Pinchart
• [PATCH] ARM: shmobile: lager: Add GPIO LEDs   Laurent Pinchart
• [PATCH] pinctrl: generic: Fix typos and clarify comments   Laurent Pinchart
• [PATCH] pinctrl: document the "GPIO mode" pitfall   Laurent Pinchart
• [PATCH 0/6] Davinci fbdev driver and enable it for DMx platform   Laurent Pinchart
• [PATCH] pinctrl: document the "GPIO mode" pitfall   Laurent Pinchart
• [PATCH] pinctrl: document the "GPIO mode" pitfall   Laurent Pinchart
• [PATCH V2] video: implement a simple framebuffer driver   Laurent Pinchart
• [PATCH V2] video: implement a simple framebuffer driver   Laurent Pinchart
• [PATCH V2] video: implement a simple framebuffer driver   Laurent Pinchart
• [PATCH V2] video: implement a simple framebuffer driver   Laurent Pinchart
• [PATCH V2] video: implement a simple framebuffer driver   Laurent Pinchart
• [PATCH V2] video: implement a simple framebuffer driver   Laurent Pinchart
• [PATCH V2] video: implement a simple framebuffer driver   Laurent Pinchart
• 3.8+, PL310_ERRATA_769419 and highbank: borked reboot   Paolo Pisati
• [PATCH v4 2/2] arm: prefer PSCI for SMP bringup   Nicolas Pitre
• [PATCH v4 2/2] arm: prefer PSCI for SMP bringup   Nicolas Pitre
• [PATCH v5 3/3] xen/arm: introduce xen_early_init, use PSCI on xen   Nicolas Pitre
• [PATCH v5 1/3] arm: introduce psci_smp_ops   Nicolas Pitre
• [GIT PULL] Multi Cluster Power Management infrastructure   Nicolas Pitre
• [PATCH v5 3/3] xen/arm: introduce xen_early_init, use PSCI on xen   Nicolas Pitre
• [GIT PULL] Multi Cluster Power Management infrastructure   Nicolas Pitre
• [GIT PULL] Multi Cluster Power Management infrastructure   Nicolas Pitre
• [PATCH v6 2/4] arm: prefer psci_smp_ops over mdesc->smp   Nicolas Pitre
• [PATCH v6 4/4] xen/arm: introduce xen_early_init, use PSCI on xen   Nicolas Pitre
• [PATCH v6 4/4] xen/arm: introduce xen_early_init, use PSCI on xen   Nicolas Pitre
• [PATCH v6 4/4] xen/arm: introduce xen_early_init, use PSCI on xen   Nicolas Pitre
• [PATCH v6 4/4] xen/arm: introduce xen_early_init, use PSCI on xen   Nicolas Pitre
• [GIT PULL] Multi Cluster Power Management infrastructure   Nicolas Pitre
• [PATCH v6 4/4] xen/arm: introduce xen_early_init, use PSCI on xen   Nicolas Pitre
• [PATCH v4 03/15] ARM: mcpm: introduce helpers for platform coherency exit/setup   Nicolas Pitre
• [PATCH v4 14/15] ARM: Enable selection of SMP operations at boot time   Nicolas Pitre
• [PATCH v4 15/15] ARM: vexpress: Select multi-cluster SMP operation if required   Nicolas Pitre
• [RFC][PATCH] arm: highmem: Add support for flushing kmap_atomic mappings   Nicolas Pitre
• [GIT PULL] Multi Cluster Power Management infrastructure   Nicolas Pitre
• [PATCH v4 15/15] ARM: vexpress: Select multi-cluster SMP operation if required   Nicolas Pitre
• [PATCH v4 14/15] ARM: Enable selection of SMP operations at boot time   Nicolas Pitre
• [PATCH v4 15/15] ARM: vexpress: Select multi-cluster SMP operation if required   Nicolas Pitre
• [PATCH v4 2/2] arm: prefer PSCI for SMP bringup   Nicolas Pitre
• [PATCH v6 3/4] ARM: Enable selection of SMP operations at boot time   Nicolas Pitre
• Removal of NWFPE in its entirety, and VFP emulation code   Nicolas Pitre
• Removal of NWFPE in its entirety, and VFP emulation code   Nicolas Pitre
• Removal of NWFPE in its entirety, and VFP emulation code   Nicolas Pitre
• Removal of NWFPE in its entirety, and VFP emulation code   Nicolas Pitre
• Removal of NWFPE in its entirety, and VFP emulation code   Nicolas Pitre
• Removal of NWFPE in its entirety, and VFP emulation code   Nicolas Pitre
• [RFC PATCH 2/2] ARM: DT: kernel: DT cpu node bindings update   Nicolas Pitre
• [RFC PATCH 2/2] ARM: DT: kernel: DT cpu node bindings update   Nicolas Pitre
• [PATCH v6 1/4] arm: introduce psci_smp_ops   Nicolas Pitre
• [PATCH v6 1/4] arm: introduce psci_smp_ops   Nicolas Pitre
• [PATCH v6 1/4] arm: introduce psci_smp_ops   Nicolas Pitre
• [PATCH v6 1/4] arm: introduce psci_smp_ops   Nicolas Pitre
• [RFC PATCH] drivers: bus: add ARM CCI support   Nicolas Pitre
• [PATCH v6 1/4] arm: introduce psci_smp_ops   Nicolas Pitre
• [Xen-devel] [PATCH v6 1/4] arm: introduce psci_smp_ops   Nicolas Pitre
• [PATCH] ARM: make cpu_init() notrace   Nicolas Pitre
• [RFC PATCH] drivers: bus: add ARM CCI support   Nicolas Pitre
• [Xen-devel] [PATCH v6 1/4] arm: introduce psci_smp_ops   Nicolas Pitre
• ARM: 7684/1: errata: Workaround for Cortex-A15 erratum 798181 (TLBI/DSB operations)   Nicolas Pitre
• [PATCH v4 01/15] ARM: multi-cluster PM: secondary kernel entry code   Nicolas Pitre
• [PATCH v4 06/15] ARM: mcpm: generic SMP secondary bringup and hotplug support   Nicolas Pitre
• [PATCH v4 11/15] drivers/bus: add ARM CCI support   Nicolas Pitre
• [PATCH v4 15/15] ARM: vexpress: Select multi-cluster SMP operation if required   Nicolas Pitre
• [PATCH v4 01/15] ARM: multi-cluster PM: secondary kernel entry code   Nicolas Pitre
• [PATCH v4 00/15] multi-cluster power management   Nicolas Pitre
• [PATCH v4 00/15] multi-cluster power management   Nicolas Pitre
• [PATCH v4 00/15] multi-cluster power management   Nicolas Pitre
• [PATCH v4 00/15] multi-cluster power management   Nicolas Pitre
• [PATCH v4 00/15] multi-cluster power management   Nicolas Pitre
• [PATCH v8 2/2] ARM: Enable selection of SMP operations at boot time   Nicolas Pitre
• [PATCH v8 1/2] arm: introduce psci_smp_ops   Nicolas Pitre
• Latest build results - errors/warnings - lots of them   Nicolas Pitre
• linux-next build error (at91) - use of bool in mach/arch.h   Nicolas Pitre
• Latest build results - errors/warnings - lots of them   Nicolas Pitre
• [PATCH 08/10] drivers: mfd: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH v2 0/7] pcmcia: at91_cf: clean up and add DT support   Fabio Porcedda
• [RFC] arm64: Early printk support for virtio-mmio console devices.   PranavkumarSawargaonkar
• [PATCH] arm: mvebu: Fix the irq map function in SMP mode   Ryan Press
• [PATCHv3 3/6] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Tony Prisk
• [PATCHv4 0/6] arm: vt8500: Add support for pinctrl/gpio module   Tony Prisk
• [PATCHv4 1/6] of: Add support for reading a u32 from a multi-value property.   Tony Prisk
• [PATCHv4 2/6] arm: vt8500: Increase available GPIOs on arch-vt8500   Tony Prisk
• [PATCHv4 3/6] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Tony Prisk
• [PATCHv4 4/6] arm: dts: vt8500: Update Wondermedia SoC dtsi files for pinctrl driver   Tony Prisk
• [PATCHv4 5/6] arm: vt8500: Remove gpio devicetree nodes   Tony Prisk
• [PATCHv4 6/6] gpio: vt8500: Remove arch-vt8500 gpio driver   Tony Prisk
• [PATCHv4 RESEND 0/6] arm: vt8500: Add support for pinctrl/gpio module   Tony Prisk
• [PATCHv4 1/6] of: Add support for reading a u32 from a multi-value property.   Tony Prisk
• [PATCHv4 2/6] arm: vt8500: Increase available GPIOs on arch-vt8500   Tony Prisk
• [PATCHv4 3/6] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Tony Prisk
• [PATCHv4 4/6] arm: dts: vt8500: Update Wondermedia SoC dtsi files for pinctrl driver   Tony Prisk
• [PATCHv4 5/6] arm: vt8500: Remove gpio devicetree nodes   Tony Prisk
• [PATCHv4 6/6] gpio: vt8500: Remove arch-vt8500 gpio driver   Tony Prisk
• [PATCHv2 0/6] fb: vt8500: patches for 3.10   Tony Prisk
• [PATCHv2 1/6] video: vt8500: Make wmt_ge_rops optional   Tony Prisk
• [PATCHv2 2/6] video: vt8500: Remove unused platform_data/video-vt8500lcdfb.h   Tony Prisk
• [PATCHv2 3/6] video: vt8500: Correct descriptions in video/Kconfig   Tony Prisk
• [PATCHv2 4/6] drivers/video/wm8505fb.c: use devm_ functions   Tony Prisk
• [PATCHv2 5/6] video: vt8500: Adjust contrast in wm8505 framebuffer driver.   Tony Prisk
• [PATCHv2 6/6] video: fb: vt8500: Convert framebuffer drivers to standardized binding   Tony Prisk
• [PATCHv2 6/6] video: fb: vt8500: Convert framebuffer drivers to standardized binding   Tony Prisk
• [PATCHv3 0/6] fb: vt8500: patches for 3.10   Tony Prisk
• [PATCHv3 1/6] video: vt8500: Make wmt_ge_rops optional   Tony Prisk
• [PATCHv3 2/6] video: vt8500: Remove unused platform_data/video-vt8500lcdfb.h   Tony Prisk
• [PATCHv3 3/6] video: vt8500: Correct descriptions in video/Kconfig   Tony Prisk
• [PATCHv3 4/6] drivers/video/wm8505fb.c: use devm_ functions   Tony Prisk
• [PATCHv3 5/6] video: vt8500: Adjust contrast in wm8505 framebuffer driver.   Tony Prisk
• [PATCHv3 6/6] video: fb: vt8500: Convert framebuffer drivers to standardized binding   Tony Prisk
• [PATCHv5 0/7] arm: vt8500: Add support for pinctrl/gpio module   Tony Prisk
• [PATCHv5 1/7] of: Add support for reading a u32 from a multi-value property.   Tony Prisk
• [PATCHv5 2/7] of: Remove duplicated code for validating property and value   Tony Prisk
• [PATCHv5 3/7] arm: vt8500: Increase available GPIOs on arch-vt8500   Tony Prisk
• [PATCHv5 4/7] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Tony Prisk
• [PATCHv5 5/7] arm: dts: vt8500: Update Wondermedia SoC dtsi files for pinctrl driver   Tony Prisk
• [PATCHv5 6/7] arm: vt8500: Remove gpio devicetree nodes   Tony Prisk
• [PATCHv5 7/7] gpio: vt8500: Remove arch-vt8500 gpio driver   Tony Prisk
• [PATCHv5 0/7] arm: vt8500: Add support for pinctrl/gpio module   Tony Prisk
• [PATCHv5 0/7] arm: vt8500: Add support for pinctrl/gpio module   Tony Prisk
• [GIT PULL] arm: vt8500: Add support for pinctrl/gpio module   Tony Prisk
• [PATCHv3 0/6] fb: vt8500: patches for 3.10   Tony Prisk
• PWM backlight build warning   Tony Prisk
• PWM backlight build warning   Tony Prisk
• linux-next: manual merge of the arm-soc tree with the gpio-lw tree   Tony Prisk
• [PATCH] arm: vt8500: Add SDHC support to WM8505 DT   Tony Prisk
• [PATCH] clk: vt8500: Missing breaks in vtwm_pll_round_rate/_set_rate.   Tony Prisk
• [RFC PATCH v2 12/13] ARM: mach-vt8500: cpus/cpu nodes dts updates   Tony Prisk
• [RFC PATCH v2 12/13] ARM: mach-vt8500: cpus/cpu nodes dts updates   Tony Prisk
• [RFC PATCH v2 12/13] ARM: mach-vt8500: cpus/cpu nodes dts updates   Tony Prisk
• [RFC PATCH v2 13/13] ARM: DT: kernel: DT cpu node bindings update   Tony Prisk
• [PATCH 0/3] dts: v8500: Cleanups for 3.10   Tony Prisk
• [PATCH 1/3] dts: vt8500: Fix invalid/missing cpu nodes for soc files.   Tony Prisk
• [PATCH 2/3] dts: vt8500: Add devicetree support for WM8750 SoC and APC8750 board   Tony Prisk
• [PATCH 3/3] dts: vt8500: Update serial nodes and disable by default in SoC files   Tony Prisk
• [PATCH 0/3] dts: v8500: Cleanups for 3.10   Tony Prisk
• VIA velocity network driver   Tony Prisk
• Array subscript above array bounds warning   Tony Prisk
• Array subscript above array bounds warning   Tony Prisk
• [PATCH 0/4] Add support for velocity network driver on platform devices   Tony Prisk
• [PATCH 1/4] net: velocity: Alphabetize #includes   Tony Prisk
• [PATCH 2/4] net: velocity: Rename vptr->dev to vptr->netdev   Tony Prisk
• [PATCH 3/4] net: velocity: Convert to generic dma functions   Tony Prisk
• [PATCH 4/4] net: velocity: Add platform device support to VIA velocity driver   Tony Prisk
• [PATCH 3/4] net: velocity: Convert to generic dma functions   Tony Prisk
• [PATCH 1/4] net: velocity: Alphabetize #includes   Tony Prisk
• [PATCHv2 0/3] Add support for velocity network driver on platform devices   Tony Prisk
• [PATCHv2 1/3] net: velocity: Rename vptr->dev to vptr->netdev   Tony Prisk
• [PATCHv2 2/3] net: velocity: Convert to generic dma functions   Tony Prisk
• [PATCHv2 3/3] net: velocity: Add platform device support to VIA velocity driver   Tony Prisk
• [PATCHv2 0/3] Add support for velocity network driver on platform devices   Tony Prisk
• [PATCHv3 0/3] Add support for velocity network driver on platform devices   Tony Prisk
• [PATCHv3 1/3] net: velocity: Rename vptr->dev to vptr->netdev   Tony Prisk
• [PATCHv3 2/3] net: velocity: Convert to generic dma functions   Tony Prisk
• [PATCHv3 3/3] net: velocity: Add platform device support to VIA velocity driver   Tony Prisk
• [PATCHv4 0/3] Add support for velocity network driver on platform devices   Tony Prisk
• [PATCHv4 1/3] net: velocity: Rename vptr->dev to vptr->netdev   Tony Prisk
• [PATCHv4 2/3] net: velocity: Convert to generic dma functions   Tony Prisk
• [PATCHv4 3/3] net: velocity: Add platform device support to VIA velocity driver   Tony Prisk
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Andre Przywara
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Andre Przywara
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Andre Przywara
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Andre Przywara
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Andre Przywara
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Andre Przywara
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Andre Przywara
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Andre Przywara
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Andre Przywara
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Andre Przywara
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Andre Przywara
• [PATCH v2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Roger Quadros
• [PATCH v4 01/21] usb: phy: nop: Add some parameters to platform data   Roger Quadros
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Roger Quadros
• [PATCH v2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Roger Quadros
• [PATCH v2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Roger Quadros
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Roger Quadros
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Roger Quadros
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Roger Quadros
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Roger Quadros
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Roger Quadros
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Roger Quadros
• [PATCH] ARM: dts: omap4-panda: Add USB Host support   Roger Quadros
• [PATCH] ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx   Roger Quadros
• [PATCH] ARM: dts: omap3-beagle-xm: Add USB Host support for Rev Ax/Bx   Roger Quadros
• [PATCH] ARM: dts: omap3-beagle-xm: Add USB Host support for Rev Ax/Bx   Roger Quadros
• [PATCH] ARM: dts: omap3-beagle-xm: Add USB Host support for Rev Ax/Bx   Roger Quadros
• [PATCH v2 1/2] ARM: dts: omap3-beagle-xm: Add USB Host support   Roger Quadros
• [PATCH v2 2/2] ARM: dts: omap3-beagle-xm: Add USB host supprot for Rev. Ax/Bx   Roger Quadros
• [PATCH] ARM: dts: omap4-panda: Add USB Host support   Roger Quadros
• linux-next ARM multi-platform randconfig errors   Roger Quadros
• [PATCH] ARM: OMAP2+: omap-usb-host: clean up pin mux setup code   Roger Quadros
• Fwd: [PATCH RESEND v2 1/1] ARM Feroceon: fix kexec by setting outer_cache.inv_all   Elijah Ragozin
• [PATCH RESEND v2 1/1] ARM Feroceon: fix kexec by setting outer_cache.inv_all   Elijah Ragozin
• [PATCH RESEND v2 1/1] ARM Feroceon: fix kexec by setting outer_cache.inv_all   Elijah Ragozin
• [PATCH 1/2] Allow constructor name selection by architecture.   Sam Ravnborg
• [PATCH 1/2] Allow constructor name selection by architecture.   Sam Ravnborg
• [PATCH V5 7/9] ARM: dts: tegra: add non-removable and keep-power-in-suspend property for MMC   Thierry Reding
• [PATCH V5 9/9] ARM: dts: tegra: add the PM configurations of PMC   Thierry Reding
• [PATCH V5 9/9] ARM: dts: tegra: add the PM configurations of PMC   Thierry Reding
• [PATCH V5 9/9] ARM: dts: tegra: add the PM configurations of PMC   Thierry Reding
• [PATCH v3 00/12] Rewrite Tegra PCIe driver   Thierry Reding
• [PATCH v3 01/12] of/pci: Provide support for parsing PCI DT ranges property   Thierry Reding
• [PATCH v3 02/12] of/pci: Add of_pci_get_devfn() function   Thierry Reding
• [PATCH v3 03/12] of/pci: Add of_pci_parse_bus_range() function   Thierry Reding
• [PATCH v3 04/12] PCI: Introduce new MSI chip infrastructure   Thierry Reding
• [PATCH v3 05/12] ARM: tegra: Move tegra_pcie_xclk_clamp() to PMC   Thierry Reding
• [PATCH v3 06/12] ARM: tegra: Move pmc.h to include/linux/tegra-pmc.h   Thierry Reding
• [PATCH v3 07/12] PCI: tegra: Move PCIe driver to drivers/pci/host   Thierry Reding
• [PATCH v3 08/12] ARM: tegra: tamonten: Add PCIe support   Thierry Reding
• [PATCH v3 09/12] ARM: tegra: tec: Add PCIe support   Thierry Reding
• [PATCH v3 10/12] ARM: tegra: harmony: Initialize PCIe from DT   Thierry Reding
• [PATCH v3 11/12] ARM: tegra: trimslice: Initialize PCIe from DT   Thierry Reding
• [PATCH v3 12/12] ARM: tegra: Update default configuration (PCIe)   Thierry Reding
• [PATCH v3 07/12] PCI: tegra: Move PCIe driver to drivers/pci/host   Thierry Reding
• [PATCH v3 07/12] PCI: tegra: Move PCIe driver to drivers/pci/host   Thierry Reding
• [PATCH v3 07/12] PCI: tegra: Move PCIe driver to drivers/pci/host   Thierry Reding
• PWM backlight build warning   Thierry Reding
• [PATCH 0/2] Update device tree binding document for pwm-tiehrpwm & pwm-tiecap   Thierry Reding
• [RFCv1 08/11] PCI: Introduce new MSI chip infrastructure   Thierry Reding
• [RFCv1 08/11] PCI: Introduce new MSI chip infrastructure   Thierry Reding
• [PATCH 17/30] pwm: samsung: repair the worst MMIO abuses   Thierry Reding
• [PATCH 1/3] ARM: tegra: pcie: Add tegra3 support   Thierry Reding
• [PATCH v3] ARM: pci: create pci_common_init_dev()   Thierry Reding
• Latest randconfig build errors   Thierry Reding
• Latest randconfig build errors   Thierry Reding
• [PATCH 4/6] pinctrl: sunxi: add clock support   Maxime Ripard
• [PATCH v2 0/6] clk: sunxi: gates support   Maxime Ripard
• [PATCH v2 0/6] clk: sunxi: gates support   Maxime Ripard
• [GIT PULL] ARM: sunxi: dt for 3.10, take 2   Maxime Ripard
• [PATCHv2 00/10] ARM: sunxi: Architecture cleanups and rework   Maxime Ripard
• [PATCH] pinctrl: sunxi: Rename wemac functions to emac   Maxime Ripard
• [GIT PULL] Sunxi Cleanups for 3.10   Maxime Ripard
• [GIT PULL] sunXi DT additions for 3.10, take 3   Maxime Ripard
• [PATCH RESEND 0/2] Add support for the Solomon SSD1306 OLED Controller   Maxime Ripard
• [PATCH 1/2] video: ssd1307fb: Add support for SSD1306 OLED controller   Maxime Ripard
• [PATCH 2/2] ARM: dts: cfa10036: Change the OLED display to SSD1306   Maxime Ripard
• [PATCH] SPI: spidev: Add DT compatible string for spidev driver.   Maxime Ripard
• [PATCH 3/3] ARM: sunxi: unify osc24M_fixed and osc24M   Maxime Ripard
• [GIT PULL] sunXi dt additions, take 4   Maxime Ripard
• MXS framebuffer driver and 18bits display   Maxime Ripard
• [PATCH] video: mxsfb: Fix colors display on lower color depth   Maxime Ripard
• [PATCH 1/3] iio: Add Nuvoton NAU7802 ADC driver   Maxime Ripard
• [PATCH 1/3] iio: Add Nuvoton NAU7802 ADC driver   Maxime Ripard
• [PATCH] video: mxsfb: Fix colors display on lower color depth   Maxime Ripard
• [PATCH RESEND] video: mxsfb: Fix colors display on lower color depth   Maxime Ripard
• [PATCHv2 0/2] Add support for the Solomon SSD1306 OLED Controller   Maxime Ripard
• [PATCH 1/2] video: ssd1307fb: Add support for SSD1306 OLED controller   Maxime Ripard
• [PATCH 2/2] ARM: dts: cfa10036: Change the OLED display to SSD1306   Maxime Ripard
• [PATCH 0/4] drivers: video: Optimisations for the ssd1307fb driver   Maxime Ripard
• [PATCH 1/4] ARM: cfa10036: dt: Change i2c0 clock frequency   Maxime Ripard
• [PATCH 2/4] ssd1307fb: Rework the communication functions   Maxime Ripard
• [PATCH 3/4] ssd1307fb: Speed up the communication with the controller   Maxime Ripard
• [PATCH 4/4] ssd1307fb: Make use of horizontal addressing mode   Maxime Ripard
• [PATCH RESEND] video: mxsfb: Fix colors display on lower color depth   Maxime Ripard
• [PATCH RESEND] video: mxsfb: Fix colors display on lower color depth   Maxime Ripard
• [RFC PATCH v2 11/13] ARM: mach-sunxi: cpus/cpu nodes dts updates   Maxime Ripard
• [PATCHv2 0/2] Add support for the Solomon SSD1306 OLED Controller   Maxime Ripard
• [PATCH] mxs: icoll: Add function to register an interrupt as FIQ source   Maxime Ripard
• [PATCH] gpio: mxs: Use set and clear capabilities of the gpio controller   Maxime Ripard
• [PATCHv3 0/6] ARM: sunxi: Add support for A10 Ethernet controller   Maxime Ripard
• [PATCH 1/6] net: Add EMAC ethernet driver found on Allwinner A10 SoC's   Maxime Ripard
• [PATCH 2/6] net: Add MDIO bus driver for the Allwinner EMAC   Maxime Ripard
• [PATCH 3/6] ARM: sun4i: Add muxing options for the ethernet controller   Maxime Ripard
• [PATCH 4/6] ARM: sunxi: Add EMAC controller node to sun4i DTSI   Maxime Ripard
• [PATCH 5/6] ARM: cubieboard: Enable ethernet (EMAC) support in dts   Maxime Ripard
• [PATCH 6/6] ARM: sunxi: Add EMAC Controller to Hackberry dt   Maxime Ripard
• [PATCH] ARM: sunxi: Fix Mini X-plus device tree build   Maxime Ripard
• [PATCH 0/2] ARM: sunxi: Clock fixes for the Allwinner A13   Maxime Ripard
• [PATCH 1/2] clk: sun5i: Add compatibles for Allwinner A13   Maxime Ripard
• [PATCH 2/2] ARM: sun5i: Update the clock compatible strings   Maxime Ripard
• [PATCH 2/2] Fix GE0/GE1 init on ix2-200 as GE0 has no PHY   Nigel Roberts
• [PATCH] ARM: Kirkwood: Fix typo in the definition of ix2-200 rebuild LED   Nigel Roberts
• [PATCH] Fix typo in the definition of ix2-200 rebuild LED   Nigel Roberts
• Central Linux ARM wiki   Luis R. Rodriguez
• Central Linux ARM wiki   Luis R. Rodriguez
• [PATCH] drm/tilcdc: Disable building as module   Guenter Roeck
• [v5] clk: add si5351 i2c common clock driver   Guenter Roeck
• [v5] clk: add si5351 i2c common clock driver   Guenter Roeck
• [v5] clk: add si5351 i2c common clock driver   Guenter Roeck
• [PATCH v6] clk: add si5351 i2c common clock driver   Guenter Roeck
• [PATCH] watchdog: Revert the AT91RM9200_WATCHDOG dependency   Guenter Roeck
• [PATCH] watchdog: Revert the AT91RM9200_WATCHDOG dependency   Guenter Roeck
• [PATCH v7] clk: add si5351 i2c common clock driver   Guenter Roeck
• [PATCH 1/3] Add support for GMT G72/G763 PWM fan controller   Guenter Roeck
• [PATCH 1/3] Add support for GMT G72/G763 PWM fan controller   Guenter Roeck
• [PATCH 09/23] watchdog: coh901327: devicetree support   Guenter Roeck
• [PATCHv1 1/3] hwmon: Add support for GMT G762/G763 PWM fan controller   Guenter Roeck
• [PATCHv1 2/3] hwmon: Add documentation for g762 driver   Guenter Roeck
• [PATCHv1 1/3] hwmon: Add support for GMT G762/G763 PWM fan controller   Guenter Roeck
• [PATCHv1 1/3] hwmon: Add support for GMT G762/G763 PWM fan controller   Guenter Roeck
• [PATCH 09/23 v2] watchdog: coh901327: devicetree support   Guenter Roeck
• [PATCHv1 1/3] hwmon: Add support for GMT G762/G763 PWM fan controller   Guenter Roeck
• [PATCH 1/5] net: Add EMAC ethernet driver found on Allwinner A10 SoC's   Stefan Roese
• VIA velocity network driver   Francois Romieu
• [PATCHv3 3/3] net: velocity: Add platform device support to VIA velocity driver   Francois Romieu
• linux-next: manual merge of the imx-mxs tree with the arm-soc tree   Stephen Rothwell
• linux-next: manual merge of the imx-mxs tree with the arm-soc tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the xilinx tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the xilinx tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the xilinx tree   Stephen Rothwell
• linux-next: manual merge of the samsung tree with the arm-soc tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the xilinx tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the xilinx tree   Stephen Rothwell
• GENERIC_GPIO considered deprecated   Stephen Rothwell
• GENERIC_GPIO considered deprecated   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the omap_dss2 tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the gpio-lw tree   Stephen Rothwell
• linux-next: build warning after merge of the final tree (probably arm-soc tree related)   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the pinctrl tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the pm tree   Stephen Rothwell
• linux-next: manual merge of the imx-mxs tree with the arm-soc tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the arm-current tree   Stephen Rothwell
• adding rpmsg.git to linux next   Stephen Rothwell
• [PATCH] clk: si5351: make clk-si5351 depend on CONFIG_OF   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the input tree   Stephen Rothwell
• adding rpmsg.git to linux next   Stephen Rothwell
• linux-next: useless merges   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the gen-gpio tree   Stephen Rothwell
• linux-next: build failure after merge of the arm-soc tree   Stephen Rothwell
• linux-next: manual merge of the renesas tree with the arm-soc tree   Stephen Rothwell
• linux-next: manual merge of the clk tree with the arm-soc tree   Stephen Rothwell
• KVM/ARM in next   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the pm tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the spi-mb tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the xen-arm tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the xen-arm tree   Stephen Rothwell
• [PATCH v2 1/4] thermal: Add driver for Armada 370/XP SoC thermal management   Zhang Rui
• [PATCH 14/30] thermal/exynos: remove unnecessary header inclusions   Zhang Rui
• [PATCH 15/21] thermal: cooling: avoid uninitialied used gcc warning   Zhang Rui
• Removal of NWFPE in its entirety, and VFP emulation code   Måns Rullgård
• Removal of NWFPE in its entirety, and VFP emulation code   Måns Rullgård
• Removal of NWFPE in its entirety, and VFP emulation code   Måns Rullgård
• Removal of NWFPE in its entirety, and VFP emulation code   Måns Rullgård
• Removal of NWFPE in its entirety, and VFP emulation code   Måns Rullgård
• Removal of NWFPE in its entirety, and VFP emulation code   Måns Rullgård
• Removal of NWFPE in its entirety, and VFP emulation code   Måns Rullgård
• Removal of NWFPE in its entirety, and VFP emulation code   Måns Rullgård
• [PATCH] clk: Add device tree binding to clk-fixed-factor   Christian Ruppert
• [PATCH] clk: Add device tree binding to clk-fixed-factor   Christian Ruppert
• [PATCH] clk: Add device tree binding to clk-fixed-factor   Christian Ruppert
• [PATCH] clk: Add device tree binding to clk-fixed-factor   Christian Ruppert
• [PATCH] clk: Add device tree binding to clk-fixed-factor   Christian Ruppert
• [PATCH v2] clk: add device tree fixed-factor-clock binding support   Christian Ruppert
• [PATCH] ARC: [TB10x] Adapt device tree to new compatible string   Christian Ruppert
• [PATCH v2] clk: add device tree fixed-factor-clock binding support   Christian Ruppert
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Rusty Russell
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Rusty Russell
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Rusty Russell
• [PATCH 0/2] Early printk support for virtio console devices.   Rusty Russell
• [PATCH 1/2] virtio: console: Add early writeonly register to config space   Rusty Russell
• [PATCH 0/2] Early printk support for virtio console devices.   Rusty Russell
• [PATCH 0/2] Early printk support for virtio console devices.   Rusty Russell
• [PATCHv3 03/10] ARM: smp_twd: Divorce smp_twd from local timer API   Mark Rutland
• [PATCH 4/5] arm: fix up ARM_ARCH_TIMER selects   Mark Rutland
• [PATCH 0/5] arm: arch_timer cleanups and niceties for 3.10   Mark Rutland
• [PATCH 2/5] ARM: KVM: arch_timers: zero CNTVOFF upon return to host   Mark Rutland
• [PATCH 2/5] ARM: KVM: arch_timers: zero CNTVOFF upon return to host   Mark Rutland
• [PATCH 1/4] Documentation: Add memory mapped ARM architected timer binding   Mark Rutland
• [PATCH 01/02] ARM: shmobile: force enable of r8a7790 arch timer   Mark Rutland
• [PATCH 3/4] clocksource: arch_timer: Push the read/write wrappers deeper   Mark Rutland
• [PATCHv4 01/11] clockevents: Prefer CPU local devices over global devices   Mark Rutland
• [PATCH] ARM: cache-l2x0: add device tree support for power control   Mark Rutland
• [PATCH 1/4] Documentation: Add memory mapped ARM architected timer binding   Mark Rutland
• [RFC PATCH 00/11] Topology bindings / Perf for big.LITTLE systems   Mark Rutland
• [RFC PATCH 01/11] Documentation: DT: arm: define CPU topology bindings   Mark Rutland
• [RFC PATCH 02/11] arm: add functions to parse cpu affinity from dt   Mark Rutland
• [RFC PATCH 03/11] arm: perf: clean up PMU names   Mark Rutland
• [RFC PATCH 04/11] arm: perf: use IDR types for CPU PMUs   Mark Rutland
• [RFC PATCH 05/11] arm: perf: make get_hw_events take arm_pmu   Mark Rutland
• [RFC PATCH 06/11] arm: perf: dynamically allocate cpu hardware data   Mark Rutland
• [RFC PATCH 07/11] arm: perf: treat PMUs as CPU affine   Mark Rutland
• [RFC PATCH 08/11] arm: perf: probe number of counters on affine CPUs   Mark Rutland
• [RFC PATCH 09/11] arm: perf: parse cpu affinity from dt   Mark Rutland
• [RFC PATCH 10/11] arm: perf: allow multiple CPU PMUs to be registered   Mark Rutland
• [RFC PATCH 11/11] arm: dts: add all PMUs for A15x2 A7x3 coretile   Mark Rutland
• [PATCH 1/4] Documentation: Add memory mapped ARM architected timer binding   Mark Rutland
• [RFCv2 0/2] Representing interrupt affinity in devicetree   Mark Rutland
• [RFC PATCH 2/2] ARM: DT: kernel: DT cpu node bindings update   Mark Rutland
• [PATCH 4/4] arm64: Add initial DTS for APM X-Gene Storm SOC and APM Mustang board   Mark Rutland
• [PATCH 4/4] arm64: Add initial DTS for APM X-Gene Storm SOC and APM Mustang board   Mark Rutland
• [PATCH 0/4] ARM 64 bit sched_clock take #2   Mark Rutland
• [PATCH 0/4] ARM 64 bit sched_clock take #2   Mark Rutland
• [PATCH V2 4/4] arm64: Add initial DTS for APM X-Gene Storm SOC and APM Mustang board   Mark Rutland
• [PATCHv2 1/4] Documentation: Add memory mapped ARM architected timer binding   Mark Rutland
• [RFC PATCH v3 02/17] Documentation: devicetree: arm: cpus/cpu nodes bindings updates   Mark Rutland
• [PATCH V4 2/5] spi: s3c64xx: added support for polling mode   Girish K S
• [PATCH V3 RESEND 3/5] spi: s3c64xx: Added provision for non-gpio i/o's   Girish K S
• [PATCH V4 4/5] spi: s3c64xx: Added provision for dedicated cs pin   Girish K S
• [PATCH RESEND V3 5/5] spi: s3c64xx: Added support for exynos5440 spi   Girish K S
• [PATCH 1/2] ARM: dts: enable spi for EXYNOS5440 SOC   Girish K S
• [PATCH 2/2] ARM: dts: add dts node for the ahci sata exynos5440   Girish K S
• [PATCH] ahci: sata: add support for exynos5440 sata   Girish K S
• [PATCH V2] ahci: sata: add support for exynos5440 sata   Girish K S
• [PATCH V2 2/2] ARM: dts: add dts node for the ahci sata exynos5440   Girish K S
• [PATCH 0/3] Polling support for s3c64xx spi controller   Girish K S
• [PATCH 1/3] spi: s3c64xx: added support for polling mode   Girish K S
• [PATCH 2/3] spi: s3c64xx: Added provision for dedicated cs pin   Girish K S
• [PATCH 3/3] spi: s3c64xx: Added support for exynos5440 spi   Girish K S
• 3.8 no mach include directory anymore?   Tim Sander
• devicetree pinmuxing on beaglebone   Tim Sander
• Pinmuxing with devicetree (beaglebone)   Tim Sander
• [PATCH] i2c: s3c2410: Add SMBus emulation for block read   Wolfram Sang
• [PATCH v5 2/3] ARM: dts: Add i2c-arbitrator bus for exynos5250-snow   Wolfram Sang
• [PATCH 08/30] i2c: s3c2410: make header file local   Wolfram Sang
• [PATCH] i2c: s3c2410: Add SMBus emulation for block read   Wolfram Sang
• [PATCH 2/3] i2c: at91: convert to dma_request_slave_channel_compat()   Wolfram Sang
• [PATCH] I2C: EXYNOS: High speed mode clock setting for HSI2C   Wolfram Sang
• [PATCH 07/23] i2c: stu300: device tree support   Wolfram Sang
• [PATCH] ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module   Jyri Sarha
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Pranavkumar Sawargaonkar
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Pranavkumar Sawargaonkar
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Pranavkumar Sawargaonkar
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Pranavkumar Sawargaonkar
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Pranavkumar Sawargaonkar
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Pranavkumar Sawargaonkar
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Pranavkumar Sawargaonkar
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Pranavkumar Sawargaonkar
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Pranavkumar Sawargaonkar
• [PATCH 0/2] Early printk support for virtio console devices.   Pranavkumar Sawargaonkar
• [PATCH 1/2] virtio: console: Add early writeonly register to config space   Pranavkumar Sawargaonkar
• [PATCH 2/2] arm64: earlyprintk support for virtio-mmio console   Pranavkumar Sawargaonkar
• [PATCH 0/2] Early printk support for virtio console devices.   Pranavkumar Sawargaonkar
• [PATCH V2 1/3] seccomp: add generic code for jitted seccomp filters.   Nicolas Schichan
• [PATCH V2 1/3] seccomp: add generic code for jitted seccomp filters.   Nicolas Schichan
• [PATCH V3] Support for JIT in Seccomp BPF filters.   Nicolas Schichan
• [PATCH V3 1/3] seccomp: add generic code for jitted seccomp filters.   Nicolas Schichan
• [PATCH V3 2/3] ARM: net: bpf_jit: make code generation less dependent on struct sk_filter.   Nicolas Schichan
• [PATCH V3 3/3] ARM: net: bpf_jit: add support for jitted seccomp filters.   Nicolas Schichan
• [PATCH 1/1] clk: Add notifier support in clk_prepare/clk_unprepare   Peter De Schrijver
• [PATCH v8 10/14] ARM: tegra: Define Tegra114 CAR binding   Peter De Schrijver
• [PATCH v9 00/14] Tegra114 clockframework   Peter De Schrijver
• [PATCH v9 01/14] clk: tegra: provide dummy cpu car ops   Peter De Schrijver
• [PATCH v9 02/14] clk: tegra: Refactor PLL programming code   Peter De Schrijver
• [PATCH v9 03/14] clk: tegra: Add TEGRA_PLL_BYPASS flag   Peter De Schrijver
• [PATCH v9 04/14] clk: tegra: introduce TEGRA_PLL_HAS_LOCK_ENABLE   Peter De Schrijver
• [PATCH v9 05/14] clk: tegra: Add PLL post divider table   Peter De Schrijver
• [PATCH v9 06/14] clk: tegra: move from a lock bit idx to a lock mask   Peter De Schrijver
• [PATCH v9 07/14] clk: tegra: Add new fields and PLL types for Tegra114   Peter De Schrijver
• [PATCH v9 08/14] clk: tegra: Add flags to tegra_clk_periph()   Peter De Schrijver
• [PATCH v9 10/14] ARM: tegra: Define Tegra114 CAR binding   Peter De Schrijver
• [PATCH v9 09/14] clk: tegra: Workaround for Tegra114 MSENC problem   Peter De Schrijver
• [PATCH v9 11/14] clk: tegra: Implement clocks for Tegra114   Peter De Schrijver
• [PATCH v9 12/14] clk: tegra: devicetree match for nvidia, tegra114-car   Peter De Schrijver
• [PATCH v9 13/14] ARM: dt: Add references to tegra_car clocks   Peter De Schrijver
• [PATCH v9 13/14] ARM: dt: Add references to tegra_car clocks   Peter De Schrijver
• [PATCH v9 14/14] clk: tegra: Remove forced clk_enable of uartd   Peter De Schrijver
• [PATCH v9 00/14] Tegra114 clockframework   Peter De Schrijver
• [PATCH v7 00/12] Tegra114 clockframework   Peter De Schrijver
• [PATCH 2/3] ARM: dts: tegra: Correct PCIe entry   Peter De Schrijver
• [PATCH] kbuild: generate generic headers before recursing into scripts   Andreas Schwab
• [PATCH] Support fsl-dcp crypto coprocessor   Robert Schwebel
• [RFC PATCH] CLK: Allow parent clock and rate to be configured in DT.   Matt Sealey
• [RFC PATCH] CLK: Allow parent clock and rate to be configured in DT.   Matt Sealey
• [RFC PATCH] CLK: Allow parent clock and rate to be configured in DT.   Matt Sealey
• [RFC PATCH] CLK: Allow parent clock and rate to be configured in DT.   Matt Sealey
• [RFC PATCH] CLK: Allow parent clock and rate to be configured in DT.   Matt Sealey
• [RFC PATCH] CLK: Allow parent clock and rate to be configured in DT.   Matt Sealey
• [PATCH] ARM: mach-imx6q: Remove code for setting up cko clock   Matt Sealey
• [PATCH 04/11] dmaengine: dw_dmac: simplify master selection   Andy Shevchenko
• [PATCH 04/11] dmaengine: dw_dmac: simplify master selection   Andy Shevchenko
• [RFC PATCH v3 5/6] sched: pack the idle load balance   Alex Shi
• [PATCH 6/8] SERIAL: OMAP: Remove the slave idle handling from the driver   Santosh Shilimkar
• [PATCH] RX-51: ARM errata 430973 workaround   Santosh Shilimkar
• [PATCH v2 02/13] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init   Santosh Shilimkar
• [GIT PULL] ARM: OMAP5: Generic updates and es2 fixes for 3.10   Santosh Shilimkar
• [GIT PULL] ARM: OMAP2+: Serial driver sysc cleanup for 3.10   Santosh Shilimkar
• [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10   Santosh Shilimkar
• [RFC v2] dmaengine: omap-dma: Start DMA without delay for cyclic channels   Santosh Shilimkar
• [RFC v2] dmaengine: omap-dma: Start DMA without delay for cyclic channels   Santosh Shilimkar
• [PATCH v2 00/12] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10   Santosh Shilimkar
• [PATCH v2 01/12] ARM: OMAP4+: PRM: Move function prototypes to common header for re-use   Santosh Shilimkar
• [PATCH v2 03/12] ARM: OMAP4+: CM: Move function prototypes to common header for re-use   Santosh Shilimkar
• [PATCH v2 05/12] ARM: OMAP4+: PRCM MPU: Move function prototypes to common header for re-use   Santosh Shilimkar
• [PATCH v2 06/12] ARM: OMAP5: PRCM: Add OMAP54XX local MPU PRCM registers   Santosh Shilimkar
• [PATCH v2 07/12] ARM: OMAP5: SCRM: Add OMAP54XX header file.   Santosh Shilimkar
• [PATCH v2 08/12] ARM: OMAP5: clockdomain data: Add OMAP54XX data and update the header   Santosh Shilimkar
• [PATCH v2 09/12] ARM: OMAP5: powerdomain data: Add OMAP54XX data and update the header   Santosh Shilimkar
• [PATCH v2 10/12] ARM: OMAP5: hwmod data: Create initial OMAP5 SOC hwmod data   Santosh Shilimkar
• [PATCH v2 11/12] ARM: OMAP5: voltagedomain data: Add OMAP5 voltage domain data   Santosh Shilimkar
• [PATCH v2 12/12] ARM: OMAP5: Enable build and frameowrk initialisations   Santosh Shilimkar
• [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10   Santosh Shilimkar
• [PATCH 00/10] ARM: OMAP5: hwmod, clock and prm data files   Santosh Shilimkar
• [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10   Santosh Shilimkar
• [PATCH v2 01/18] ARM: OMAP4+: PM: Consolidate MPU subsystem PM code for re-use   Santosh Shilimkar
• [PATCH v2 03/18] ARM: OMAP4+: PM: Consolidate and use OMAP4 PM code for OMAP5   Santosh Shilimkar
• [PATCH v2 03/18] ARM: OMAP4+: PM: Consolidate and use OMAP4 PM code for OMAP5   Santosh Shilimkar
• [PATCH v2 05/18] ARM: OMAP5: PM: Enables ES2 PM mode by default   Santosh Shilimkar
• [PATCH v2 06/18] ARM: OMAP5: PM: Enable Mercury retention mode on CPUx powerdomains   Santosh Shilimkar
• [PATCH v2 07/18] ARM: OMAP5: Add init_late() hook to enable pm initialization   Santosh Shilimkar
• [PATCH v2 08/18] ARM: OMAP5: PM: Add CPU power off in hotplug path   Santosh Shilimkar
• [PATCH v2 09/18] ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method   Santosh Shilimkar
• [PATCH v2 11/18] ARM: OMAP5: PM: Add L2 memory power down support   Santosh Shilimkar
• [PATCH v2 12/18] ARM: OMAP4: CPUidle: Avoid double idle driver registration   Santosh Shilimkar
• [PATCH v2 13/18] ARM: OMAP: CPUidle: Unregister drivere on device registration failure   Santosh Shilimkar
• [PATCH v2 14/18] ARM: OMAP4: CPUidle: Make C-state description field more precise   Santosh Shilimkar
• [PATCH v2 16/18] ARM: OMAP4+: CPUidle: Deprecate use of omap4_mpuss_read_prev_context_state()   Santosh Shilimkar
• [PATCH v2 15/18] ARM: OMAP4+: CPUidle: Consolidate idle driver for OMAP5 support   Santosh Shilimkar
• [PATCH v2 17/18] ARM: OMAP4+: CPUidle: Add OMAP5 idle driver support   Santosh Shilimkar
• [PATCH v2 00/18] ARM: OMAP5: PM: Add MPUSS suspend and CPUidle support   Santosh Shilimkar
• [PATCH v2 00/18] ARM: OMAP5: PM: Add MPUSS suspend and CPUidle support   Santosh Shilimkar
• [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10   Santosh Shilimkar
• [PATCH] ARM: dts: OMAP4+: Correct L3 interrupts   Santosh Shilimkar
• [PATCH 0/5] gpio/omap: 2nd batch of updates for v3.10   Santosh Shilimkar
• [PATCH] ARM: dts: OMAP4+: Correct L3 interrupts   Santosh Shilimkar
• [PATCH v2 08/18] ARM: OMAP5: PM: Add CPU power off in hotplug path   Santosh Shilimkar
• [PATCH v2 09/18] ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method   Santosh Shilimkar
• [PATCH v2 17/18] ARM: OMAP4+: CPUidle: Add OMAP5 idle driver support   Santosh Shilimkar
• [PATCH v2 09/18] ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method   Santosh Shilimkar
• [PATCH v3 0/4] ARM: OMAP4+: PM: Consolidate code for re-use on OMAP5   Santosh Shilimkar
• [PATCH v3 1/4] ARM: OMAP4+: PM: Consolidate MPU subsystem PM code for re-use   Santosh Shilimkar
• [PATCH v3 2/4] ARM: OMAP4+: PM: Consolidate OMAP4 PM code to re-use it for OMAP5   Santosh Shilimkar
• [PATCH v3 3/4] ARM: OMAP4+: Make secondary_startup function name more consistent   Santosh Shilimkar
• [PATCH v3 4/4] ARM: OMAP4+: CPUidle: Consolidate idle driver for OMAP5 support   Santosh Shilimkar
• [PATCH v3 2/4] ARM: OMAP4+: PM: Consolidate OMAP4 PM code to re-use it for OMAP5   Santosh Shilimkar
• [PATCH v3 1/4] ARM: OMAP4+: PM: Consolidate MPU subsystem PM code for re-use   Santosh Shilimkar
• [PATCH v3 1/4] ARM: OMAP4+: PM: Consolidate MPU subsystem PM code for re-use   Santosh Shilimkar
• [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10   Santosh Shilimkar
• [PATCH v3 2/4] ARM: OMAP4+: PM: Consolidate OMAP4 PM code to re-use it for OMAP5   Santosh Shilimkar
• [PATCH v3 0/4] ARM: OMAP4+: PM: Consolidate code for re-use on OMAP5   Santosh Shilimkar
• [PATCH v3 2/4] ARM: OMAP4+: PM: Consolidate OMAP4 PM code to re-use it for OMAP5   Santosh Shilimkar
• [RFC v2] dmaengine: omap-dma: Start DMA without delay for cyclic channels   Santosh Shilimkar
• [PATCH v3 2/4] ARM: OMAP4+: PM: Consolidate OMAP4 PM code to re-use it for OMAP5   Santosh Shilimkar
• [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10   Santosh Shilimkar
• [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10   Santosh Shilimkar
• [PATCH] gpio/omap: ensure gpio context is initialised   Santosh Shilimkar
• [V3 patch 03/19] ARM: OMAP3: remove cpuidle_wrap_enter   Santosh Shilimkar
• [V3 patch 01/19] ARM: shmobile: cpuidle: remove shmobile_enter_wfi function   Santosh Shilimkar
• [V3 patch 02/19] ARM: shmobile: cpuidle: remove shmobile_enter_wfi prototype   Santosh Shilimkar
• [V3 patch 05/19] ARM: ux500: cpuidle: replace for_each_online_cpu by for_each_possible_cpu   Santosh Shilimkar
• [V3 patch 06/19] cpuidle: make a single register function for all   Santosh Shilimkar
• [V3 patch 09/19] ARM: OMAP3: cpuidle: use init/exit common routine   Santosh Shilimkar
• [V3 patch 13/19] ARM: OMAP4: cpuidle: use init/exit common routine   Santosh Shilimkar
• [PATCH] gpio/omap: ensure gpio context is initialised   Santosh Shilimkar
• [PATCH] gpio/omap: ensure gpio context is initialised   Santosh Shilimkar
• Multiple issues with omap4 panda es in linux next   Santosh Shilimkar
• Multiple issues with omap4 panda es in linux next   Santosh Shilimkar
• [V4 patch 03/15] cpuidle: make a single register function for all   Santosh Shilimkar
• [V4 patch 03/15] cpuidle: make a single register function for all   Santosh Shilimkar
• [V3 patch 06/19] cpuidle: make a single register function for all   Santosh Shilimkar
• [V3 patch 06/19] cpuidle: make a single register function for all   Santosh Shilimkar
• Multiple issues with omap4 panda es in linux next   Santosh Shilimkar
• Re: [PATCH] ARM: autcpu12: Fix config check in autcpu12_init_late()   Alexander Shiyan
• Re[2]: [PATCH 4/4] ARM: s3c24xx: Fix switching FIFO in arch_enable_uart_fifo function   Alexander Shiyan
• [PATCH] mmc: mxcmmc: Fix bug when card is present during boot   Alexander Shiyan
• [PATCH 1/3] ARM: dts: Add NFC support for i.MX27 Phytec PCM038 module   Alexander Shiyan
• [PATCH 2/3] ARM: dts: Add SPI support for i.MX27 Phytec PCM038 module   Alexander Shiyan
• [PATCH 3/3] ARM: dts: Add missing imx27-phytec-phycore dtb target   Alexander Shiyan
• [PATCH] regulator: mc13783: Add device tree probe support   Alexander Shiyan
• Re[2]: [PATCH] regulator: mc13783: Add device tree probe support   Alexander Shiyan
• [PATCH] GPIO: gpio-generic: Remove kfree() from bgpio_remove call   Alexander Shiyan
• Re[2]: [PATCH] GPIO: gpio-generic: Remove kfree() from bgpio_remove call   Alexander Shiyan
• [PATCH 1/2] GPIO: clps711x: Rewrite driver for using generic GPIO code   Alexander Shiyan
• [PATCH 2/2] GPIO: clps711x: Add DT support   Alexander Shiyan
• Re[2]: [PATCH] mmc: mxcmmc: Fix bug when card is present during boot   Alexander Shiyan
• Re[2]: [PATCH 1/2] GPIO: clps711x: Rewrite driver for using generic GPIO code   Alexander Shiyan
• Re[2]: [PATCH 1/2] GPIO: clps711x: Rewrite driver for using generic GPIO code   Alexander Shiyan
• Re[2]: [PATCH 1/2] GPIO: clps711x: Rewrite driver for using generic GPIO code   Alexander Shiyan
• [PATCH v2 1/3] GPIO: clps711x: Rewrite driver for using generic GPIO code   Alexander Shiyan
• [PATCH v2 2/3] ARM: clps711x: Re-add GPIO support   Alexander Shiyan
• [PATCH v2 3/3] GPIO: clps711x: Add DT support   Alexander Shiyan
• [PATCH] media: coda: Fix compile breakage   Alexander Shiyan
• [PATCH v2 1/2] regulator: mc13xxx: Add warning of incorrect names of regulators   Alexander Shiyan
• [PATCH v2 2/2] regulator: mc13783: Add device tree probe support   Alexander Shiyan
• Re[2]: [PATCH V2] video: implement a simple framebuffer driver   Alexander Shiyan
• [PATCH 2/3 v2] ARM: shmobile: r8a7778: add r8a7778_init_irq_extpin()   Sergei Shtylyov
• [PATCH 3/3 v2] ARM: shmobile: bockw: add SMSC ethernet support   Sergei Shtylyov
• [PATCH 1/2] ARM: shmobile: R8A7779: add Ether support   Sergei Shtylyov
• [PATCH 2/2] ARM: shmobile: R8A7778: add Ether support   Sergei Shtylyov
• [PATCH 1/2] ARM: shmobile: R8A7779: add Ether support   Sergei Shtylyov
• [PATCH 1/2] ARM: shmobile: R8A7779: add Ether support   Sergei Shtylyov
• [PATCH 16/30] ARM: shmobile: sh7372: use fixed ratio clock   Sergei Shtylyov
• [PATCH 1/2] ARM: shmobile: R8A7779: add Ether support   Sergei Shtylyov
• [PATCH 1/2] ARM: shmobile: R8A7779: add Ether support   Sergei Shtylyov
• [PATCH v2 1/2] ARM: shmobile: R8A7779: add Ether support   Sergei Shtylyov
• [PATCH v2 2/2] ARM: shmobile: R8A7778: add Ether support   Sergei Shtylyov
• [PATCH 0/8] Reorganize R8A7779/Marzen USB code   Sergei Shtylyov
• [PATCH 1/8] ARM: shmobile:Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code   Sergei Shtylyov
• [PATCH 3/8] ARM: shmobile: R8A7779: setup EHCI internal buffer   Sergei Shtylyov
• [PATCH 4/8] rcar-phy: remove EHCI internal buffer setup   Sergei Shtylyov
• [PATCH 5/8] rcar-phy: correct base address   Sergei Shtylyov
• [PATCH 7/8] ARM: shmobile: Marzen: pass platform data to USB PHY device   Sergei Shtylyov
• [PATCH 1/8] ARM: shmobile:Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code   Sergei Shtylyov
• [PATCH v5 3/3] ARM: shmobile: sh73a0: add CPUFreq support   Sergei Shtylyov
• [PATCH 4/8] rcar-phy: remove EHCI internal buffer setup   Sergei Shtylyov
• [PATCH 5/8] rcar-phy: correct base address   Sergei Shtylyov
• [PATCH 7/8] ARM: shmobile: Marzen: pass platform data to USB PHY device   Sergei Shtylyov
• [PATCH 0/8] Reorganize R8A7779/Marzen USB code   Sergei Shtylyov
• [PATCH v5 3/3] ARM: shmobile: sh73a0: add CPUFreq support   Sergei Shtylyov
• [PATCH 1/8] ARM: shmobile:Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code   Sergei Shtylyov
• [PATCH 0/8] Reorganize R8A7779/Marzen USB code   Sergei Shtylyov
• [PATCH v9 4/6] ARM: davinci: Add a remoteproc driver implementation for OMAP-L13x DSP   Sergei Shtylyov
• [PATCH 0/8] Reorganize R8A7779/Marzen USB code   Sergei Shtylyov
• [PATCH v2 0/9] Reorganize R8A7779/Marzen USB code   Sergei Shtylyov
• [PATCH v2 1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code   Sergei Shtylyov
• [PATCH v2 3/9] ARM: shmobile: R8A7779: setup EHCI internal buffer   Sergei Shtylyov
• [PATCH v2 4/9] rcar-phy: remove EHCI internal buffer setup   Sergei Shtylyov
• [PATCH v2 5/9] ARM: shmobile: R8A7779: remove USB PHY 2nd memory resource   Sergei Shtylyov
• [PATCH v2 6/9] rcar-phy: correct base address   Sergei Shtylyov
• [PATCH v2 8/9] ARM: shmobile: Marzen: pass platform data to USB PHY device   Sergei Shtylyov
• [PATCH 0/8] Reorganize R8A7779/Marzen USB code   Sergei Shtylyov
• [PATCH v2 0/9] Reorganize R8A7779/Marzen USB code   Sergei Shtylyov
• [PATCH v9 4/6] ARM: davinci: Add a remoteproc driver implementation for OMAP-L13x DSP   Sergei Shtylyov
• [PATCH 1/2] ARM: shmobile: R8A7778: fix Ether device name   Sergei Shtylyov
• [PATCH 2/2] ARM: shmobile: R8A7779: fix Ether device name   Sergei Shtylyov
• [PATCH v3 0/9] Reorganize R8A7779/Marzen USB code   Sergei Shtylyov
• [PATCH v3 1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code   Sergei Shtylyov
• [PATCH v3 3/9] ARM: shmobile: R8A7779: setup EHCI internal buffer   Sergei Shtylyov
• [PATCH v3 4/9] rcar-phy: remove EHCI internal buffer setup   Sergei Shtylyov
• [PATCH v3 5/9] ARM: shmobile: R8A7779: remove USB PHY 2nd memory resource   Sergei Shtylyov
• [PATCH v3 6/9] rcar-phy: correct base address   Sergei Shtylyov
• [PATCH v3 8/9] ARM: shmobile: Marzen: pass platform data to USB PHY device   Sergei Shtylyov
• [PATCH 0/4] Add USB support to R8A7778/BOCK-W   Sergei Shtylyov
• [PATCH 2/4] ARM: shmobile: R8A7778: add USB support   Sergei Shtylyov
• [PATCH 3/4] ARM: shmobile: BOCK-W: add USB support   Sergei Shtylyov
• [PATCH 4/4] ARM: shmobile: BOCK-W: enable USB in defconfig   Sergei Shtylyov
• [PATCH 0/4] Add USB support to R8A7778/BOCK-W   Sergei Shtylyov
• [PATCH v3 4/9] rcar-phy: remove EHCI internal buffer setup   Sergei Shtylyov
• [PATCH v3 0/9] Reorganize R8A7779/Marzen USB code   Sergei Shtylyov
• [PATCH v3 0/9] Reorganize R8A7779/Marzen USB code   Sergei Shtylyov
• [PATCH v3 0/9] Reorganize R8A7779/Marzen USB code   Sergei Shtylyov
• [PATCH v2 0/9] Reorganize R8A7779/Marzen USB code   Sergei Shtylyov
• [PATCH v2 0/9] Reorganize R8A7779/Marzen USB code   Sergei Shtylyov
• [PATCH v4 0/9] Reorganize R8A7779/Marzen USB code   Sergei Shtylyov
• [PATCH v4 1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code   Sergei Shtylyov
• [PATCH v4 3/9] ARM: shmobile: r8a7779: setup EHCI internal buffer   Sergei Shtylyov
• [PATCH v4 4/9] rcar-phy: remove EHCI internal buffer setup   Sergei Shtylyov
• [PATCH v4 5/9] ARM: shmobile: r8a7779: remove USB PHY 2nd memory resource   Sergei Shtylyov
• [PATCH v4 6/9] rcar-phy: correct base address   Sergei Shtylyov
• [PATCH v4 8/9] ARM: shmobile: Marzen: pass platform data to USB PHY device   Sergei Shtylyov
• [PATCH v2 0/4] Add USB support to R8A7778/BOCK-W   Sergei Shtylyov
• [PATCH v2 2/4] ARM: shmobile: r8a7778: add USB support   Sergei Shtylyov
• [PATCH v2 3/4] ARM: shmobile: BOCK-W: add USB support   Sergei Shtylyov
• [PATCH v2 4/4] ARM: shmobile: BOCK-W: enable USB in defconfig   Sergei Shtylyov
• [PATCH v3 0/4] Add USB support to R8A7778/BOCK-W   Sergei Shtylyov
• [PATCH v3 2/4] ARM: shmobile: r8a7778: add USB support   Sergei Shtylyov
• [PATCH v3 3/4] ARM: shmobile: BOCK-W: add USB support   Sergei Shtylyov
• [PATCH v3 4/4] ARM: shmobile: BOCK-W: enable USB in defconfig   Sergei Shtylyov
• [PATCH] ARM: shmobile: BOCK-W: enable CONFIG_PM_RUNTIME in defconfig   Sergei Shtylyov
• [PATCH] ARM: shmobile: BOCK-W: enable CONFIG_PM_RUNTIME in defconfig   Sergei Shtylyov
• [PATCH 0/2] Add I2C support to R8A7778/BOCK-W   Sergei Shtylyov
• [PATCH 1/2] ARM: shmobile: r8a7778: add I2C support   Sergei Shtylyov
• [PATCH 2/2] ARM: shmobile: BOCK-W: enable I2C in defconfig   Sergei Shtylyov
• [PATCH 0/4] R-Car VIN driver with R8A7779/Marzen support   Sergei Shtylyov
• [PATCH 2/4] ARM: shmobile: r8a7779: add VIN support   Sergei Shtylyov
• [PATCH 3/4] ARM: shmobile: Marzen: add VIN and ADV7180 support   Sergei Shtylyov
• [PATCH 4/4] ARM: shmobile: Marzen: enable VIN and ADV7180 in defconfig   Sergei Shtylyov
• [PATCH 3/4] ARM: shmobile: Marzen: add VIN and ADV7180 support   Sergei Shtylyov
• [PATCH 2/2] ARM: shmobile: BOCK-W: enable I2C in defconfig   Sergei Shtylyov
• [PATCH 4/4] ARM: shmobile: Marzen: enable VIN and ADV7180 in defconfig   Sergei Shtylyov
• [PATCH 3/4] ARM: shmobile: Marzen: add VIN and ADV7180 support   Sergei Shtylyov
• [PATCH v2 1/2] ARM: shmobile: R8A7779: add Ether support   Sergei Shtylyov
• [PATCH 1/8] ARM: shmobile:Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code   Sergei Shtylyov
• [PATCH v3 4/4] ARM: shmobile: BOCK-W: enable USB in defconfig   Sergei Shtylyov
• [PATCH 1/8] ARM: shmobile:Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code   Sergei Shtylyov
• [PATCH 1/5] ARM: at91: at91sam9x5 RTC is not compatible with at91rm9200 one   Sergei Shtylyov
• [PATCH 1/5] ARM: at91: at91sam9x5 RTC is not compatible with at91rm9200 one   Sergei Shtylyov
• [PATCH v2 0/9] Reorganize R8A7779/Marzen USB code   Sergei Shtylyov
• [PATCH v3 4/4] ARM: shmobile: BOCK-W: enable USB in defconfig   Sergei Shtylyov
• [PATCH v5 0/9] Reorganize R8A7779/Marzen USB code   Sergei Shtylyov
• [PATCH v5 1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code   Sergei Shtylyov
• [PATCH v5 3/9] ARM: shmobile: r8a7779: setup EHCI internal buffer   Sergei Shtylyov
• [PATCH v5 4/9] rcar-phy: remove EHCI internal buffer setup   Sergei Shtylyov
• [PATCH v5 5/9] ARM: shmobile: r8a7779: remove USB PHY 2nd memory resource   Sergei Shtylyov
• [PATCH v5 6/9] rcar-phy: correct base address   Sergei Shtylyov
• [PATCH v5 8/9] ARM: shmobile: Marzen: pass platform data to USB PHY device   Sergei Shtylyov
• [PATCH v4 0/4] Add USB support to R8A7778/BOCK-W   Sergei Shtylyov
• [PATCH v4 2/3] ARM: shmobile: r8a7778: add USB support   Sergei Shtylyov
• [PATCH v4 3/3] ARM: shmobile: BOCK-W: add USB support   Sergei Shtylyov
• [PATCH v2 0/1] Add I2C support to R8A7778/BOCK-W   Sergei Shtylyov
• [PATCH v2 1/1] ARM: shmobile: r8a7778: add I2C support   Sergei Shtylyov
• [PATCH v4 0/4] Add USB support to R8A7778/BOCK-W   Sergei Shtylyov
• [PATCH v2 0/1] Add I2C support to R8A7778/BOCK-W   Sergei Shtylyov
• [PATCH v2 0/4] R-Car VIN driver with R8A7779/Marzen support   Sergei Shtylyov
• [PATCH v2 2/4] ARM: shmobile: r8a7779: add VIN support   Sergei Shtylyov
• [PATCH v2 3/4] ARM: shmobile: Marzen: add VIN and ADV7180 support   Sergei Shtylyov
• [PATCH v2 4/4] ARM: shmobile: Marzen: enable VIN and ADV7180 in defconfig   Sergei Shtylyov
• [PATCH v2 2/4] ARM: shmobile: r8a7779: add VIN support   Sergei Shtylyov
• [PATCH 0/5] OKI ML86V7667 driver and R8A7778/BOCK-W VIN support   Sergei Shtylyov
• [PATCH 3/5] ARM: shmobile: r8a7778: add VIN support   Sergei Shtylyov
• [PATCH 4/5] ARM: shmobile: BOCK-W: add VIN and ML86V7667 support   Sergei Shtylyov
• [PATCH 5/5] ARM: shmobile: BOCK-W: enable VIN and ML86V7667 in defconfig   Sergei Shtylyov
• [PATCH 0/5] OKI ML86V7667 driver and R8A7778/BOCK-W VIN support   Sergei Shtylyov
• [PATCH v2 0/5] OKI ML86V7667 driver and R8A7778/BOCK-W VIN support   Sergei Shtylyov
• [PATCH v2 3/5] ARM: shmobile: r8a7778: add VIN support   Sergei Shtylyov
• [PATCH v2 4/5] ARM: shmobile: BOCK-W: add VIN and ML86V7667 support   Sergei Shtylyov
• [PATCH v2 5/5] ARM: shmobile: BOCK-W: enable VIN and ML86V7667 in defconfig   Sergei Shtylyov
• [PATCH v2 4/5] ARM: shmobile: BOCK-W: add VIN and ML86V7667 support   Sergei Shtylyov
• [PATCH v5 1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code   Sergei Shtylyov
• [PATCH] ARM: shmobile: lager: Add GPIO LEDs   Sergei Shtylyov
• [PATCH] ARM: shmobile: sh73a0: Use IORESOURCE_MEM_* everywhere   Sergei Shtylyov
• [PATCH v2 0/1] Add I2C support to R8A7778/BOCK-W   Sergei Shtylyov
• [PATCH v2 2/4] ARM: shmobile: r8a7779: add VIN support   Sergei Shtylyov
• [PATCH v5 1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code   Sergei Shtylyov
• [PATCH v5 0/9] Reorganize R8A7779/Marzen USB code   Sergei Shtylyov
• [PATCH v6 0/9] Reorganize R8A7779/Marzen USB code   Sergei Shtylyov
• [PATCH v6 1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code   Sergei Shtylyov
• [PATCH v6 2/9] ehci-platform: add pre_setup() method to platform data   Sergei Shtylyov
• [PATCH v6 3/9] ARM: shmobile: r8a7779: setup EHCI internal buffer   Sergei Shtylyov
• [PATCH v6 5/9] ARM: shmobile: r8a7779: remove USB PHY 2nd memory resource   Sergei Shtylyov
• [PATCH v6 8/9] ARM: shmobile: Marzen: pass platform data to USB PHY device   Sergei Shtylyov
• [PATCH v5 0/3] Add USB support to R8A7778/BOCK-W   Sergei Shtylyov
• [PATCH v5 2/3] ARM: shmobile: r8a7778: add USB support   Sergei Shtylyov
• [PATCH v5 3/3] ARM: shmobile: BOCK-W: add USB support   Sergei Shtylyov
• [PATCH v3 0/1] Add I2C support to R8A7778/BOCK-W   Sergei Shtylyov
• [PATCH v3 1/1] ARM: shmobile: r8a7778: add I2C support   Sergei Shtylyov
• [PATCH v3 0/4] R-Car VIN driver with R8A7779/Marzen support   Sergei Shtylyov
• [PATCH v3 2/4] ARM: shmobile: r8a7779: add VIN support   Sergei Shtylyov
• [PATCH v3 3/4] ARM: shmobile: Marzen: add VIN and ADV7180 support   Sergei Shtylyov
• [PATCH v3 4/4] ARM: shmobile: Marzen: enable VIN and ADV7180 in defconfig   Sergei Shtylyov
• [PATCH v3 0/5] OKI ML86V7667 driver and R8A7778/BOCK-W VIN support   Sergei Shtylyov
• [PATCH v3 1/5] V4L2: I2C: ML86V7667 video decoder driver   Sergei Shtylyov
• [PATCH v3 3/5] ARM: shmobile: r8a7778: add VIN support   Sergei Shtylyov
• [PATCH v3 4/5] ARM: shmobile: BOCK-W: add VIN and ML86V7667 support   Sergei Shtylyov
• [PATCH v3 5/5] ARM: shmobile: BOCK-W: enable VIN and ML86V7667 in defconfig   Sergei Shtylyov
• [PATCH v3 4/4] ARM: shmobile: BOCK-W: enable USB in defconfig   Sergei Shtylyov
• [PATCH 04/10] usb: musb: ux500: harden checks for platform data   Sergei Shtylyov
• [PATCH 04/10] usb: musb: ux500: harden checks for platform data   Sergei Shtylyov
• [PATCH 1/2] drivers/video: Kconfig, fix mxsfb build   Sergei Shtylyov
• [PATCH v3 4/5] ARM: shmobile: BOCK-W: add VIN and ML86V7667 support   Sergei Shtylyov
• [PATCH] ARM: shmobile: BOCK-W: add Ether support   Sergei Shtylyov
• [PATCH v7 0/9] Reorganize R8A7779/Marzen USB code   Sergei Shtylyov
• [PATCH v7 1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code   Sergei Shtylyov
• [PATCH v7 3/9] ARM: shmobile: r8a7779: setup EHCI internal buffer   Sergei Shtylyov
• [PATCH v7 5/9] ARM: shmobile: r8a7779: remove USB PHY 2nd memory resource   Sergei Shtylyov
• [PATCH v7 8/9] ARM: shmobile: Marzen: pass platform data to USB PHY device   Sergei Shtylyov
• [PATCH v6 0/3] Add USB support to R8A7778/BOCK-W   Sergei Shtylyov
• [PATCH v6 2/3] ARM: shmobile: r8a7778: add USB support   Sergei Shtylyov
• [PATCH v6 3/3] ARM: shmobile: BOCK-W: add USB support   Sergei Shtylyov
• [PATCH] ARM: dts: imx23-olinuxino: Set the sdcard as non-removable   Alexandre Pereira da Silva
• [PATCH] ARM: dts: imx23-olinuxino: Set the sdcard as non-removable   Alexandre Pereira da Silva
• [PATCH] ARM: dts: imx23-olinuxino: mark sdcard cd as broken   Alexandre Pereira da Silva
• [PATCH 08/10] arm: zynq: Add smp support   Michal Simek
• [GIT PULL] arm-soc: Xilinx zynq timer changes for v3.10   Michal Simek
• [GIT PULL] arm-soc: Xilinx zynq core - pmu enable for v3.10   Michal Simek
• [GIT PULL] arm-soc: Xilinx zynq core - smp for v3.10   Michal Simek
• linux-next: manual merge of the arm-soc tree with the xilinx tree   Michal Simek
• [PATCH v6 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC   Michal Simek
• [PATCH] ARM: EXYNOS5: Fix kernel dump in AFTR idle mode   Inderpal Singh
• Problem building 3.9rc5 - with CONFIG_AUTO_ZRELADDR   Mario Smarduch
• [RFC PATCH] Device/Interrupt Passthrough - 3.9rc5   Mario Smarduch
• [PATCH] pinctrl:sirf:re-arch and add support for new SiRFatlas6 SoC   Barry Song
• [PATCH] dmaengine: sirf: move driver init from module_init to subsys_initcall   Barry Song
• [PATCH v8 1/7] media: V4L2: add temporary clock helpers   Barry Song
• [PATCH v8 1/7] media: V4L2: add temporary clock helpers   Barry Song
• [PATCHv5 00/11] Remove ARM local timer API   Barry Song
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Alexander Spyridakis
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Alexander Spyridakis
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Alexander Spyridakis
• [PATCH v4 2/2] arm: prefer PSCI for SMP bringup   Stefano Stabellini
• [PATCH v4 2/2] arm: prefer PSCI for SMP bringup   Stefano Stabellini
• [PATCH v4 1/2] arm: introduce psci_smp_ops   Stefano Stabellini
• [PATCH 0/3 v5] arm: introduce psci_smp_ops and use them on Xen   Stefano Stabellini
• [PATCH v5 1/3] arm: introduce psci_smp_ops   Stefano Stabellini
• [PATCH v5 2/3] ARM: Enable selection of SMP operations at boot time   Stefano Stabellini
• [PATCH v5 3/3] xen/arm: introduce xen_early_init, use PSCI on xen   Stefano Stabellini
• [PATCH v5 3/3] xen/arm: introduce xen_early_init, use PSCI on xen   Stefano Stabellini
• [PATCH v5 1/3] arm: introduce psci_smp_ops   Stefano Stabellini
• [PATCH v5 3/3] xen/arm: introduce xen_early_init, use PSCI on xen   Stefano Stabellini
• [PATCH 0/4 v6] arm: introduce psci_smp_ops and use them on Xen   Stefano Stabellini
• [PATCH v6 1/4] arm: introduce psci_smp_ops   Stefano Stabellini
• [PATCH v6 2/4] arm: prefer psci_smp_ops over mdesc->smp   Stefano Stabellini
• [PATCH v6 3/4] ARM: Enable selection of SMP operations at boot time   Stefano Stabellini
• [PATCH v6 4/4] xen/arm: introduce xen_early_init, use PSCI on xen   Stefano Stabellini
• [PATCH 0/4 v6] arm: introduce psci_smp_ops and use them on Xen   Stefano Stabellini
• [PATCH v6 4/4] xen/arm: introduce xen_early_init, use PSCI on xen   Stefano Stabellini
• [PATCH v6 4/4] xen/arm: introduce xen_early_init, use PSCI on xen   Stefano Stabellini
• [PATCH v6 4/4] xen/arm: introduce xen_early_init, use PSCI on xen   Stefano Stabellini
• [PATCH v6 4/4] xen/arm: introduce xen_early_init, use PSCI on xen   Stefano Stabellini
• [PATCH 0/4 v6] arm: introduce psci_smp_ops and use them on Xen   Stefano Stabellini
• [PATCH 0/4 v6] arm: introduce psci_smp_ops and use them on Xen   Stefano Stabellini
• [PATCH v3 0/5] xen/arm: move to mach-virt and support SMP   Stefano Stabellini
• [PATCH v3 1/5] xen/arm: actually pass a non-NULL percpu pointer to request_percpu_irq   Stefano Stabellini
• [PATCH v3 2/5] xen/arm: SMP support   Stefano Stabellini
• [PATCH v3 3/5] xen: move the xenvm machine to mach-virt   Stefano Stabellini
• [PATCH v3 4/5] xen/arm: implement HYPERVISOR_vcpu_op   Stefano Stabellini
• [PATCH v3 5/5] xenvm: add a simple PSCI node and a second cpu   Stefano Stabellini
• [PATCH 0/3 v7] arm: introduce psci_smp_ops   Stefano Stabellini
• [PATCH v7 1/3] arm: introduce psci_smp_ops   Stefano Stabellini
• [PATCH v7 2/3] arm: prefer psci_smp_ops over mdesc->smp   Stefano Stabellini
• [PATCH v7 3/3] ARM: Enable selection of SMP operations at boot time   Stefano Stabellini
• [PATCH] xen/arm: introduce xen_early_init, use PSCI on xen   Stefano Stabellini
• [PATCH] xen/arm: introduce xen_early_init, use PSCI on xen   Stefano Stabellini
• [PATCH v2] xen/arm: introduce xen_early_init, use PSCI on xen   Stefano Stabellini
• [PATCH v6 1/4] arm: introduce psci_smp_ops   Stefano Stabellini
• [PATCH v6 1/4] arm: introduce psci_smp_ops   Stefano Stabellini
• [PATCH v6 1/4] arm: introduce psci_smp_ops   Stefano Stabellini
• [PATCH v6 1/4] arm: introduce psci_smp_ops   Stefano Stabellini
• [Xen-devel] [PATCH v6 1/4] arm: introduce psci_smp_ops   Stefano Stabellini
• [Xen-devel] [PATCH v6 1/4] arm: introduce psci_smp_ops   Stefano Stabellini
• [PATCH v6 1/4] arm: introduce psci_smp_ops   Stefano Stabellini
• [PATCH 0/2 v8] arm: introduce psci_smp_ops   Stefano Stabellini
• [PATCH v8 1/2] arm: introduce psci_smp_ops   Stefano Stabellini
• [PATCH v8 2/2] ARM: Enable selection of SMP operations at boot time   Stefano Stabellini
• [PATCH v4 0/7] xen/arm: move to mach-virt and support SMP   Stefano Stabellini
• [PATCH v4 1/7] xen/arm: actually pass a non-NULL percpu pointer to request_percpu_irq   Stefano Stabellini
• [PATCH v4 2/7] xen/arm: SMP support   Stefano Stabellini
• [PATCH v4 3/7] xen: move the xenvm machine to mach-virt   Stefano Stabellini
• [PATCH v4 4/7] xen/arm: implement HYPERVISOR_vcpu_op   Stefano Stabellini
• [PATCH v4 5/7] xen/arm: XEN selects ARM_PSCI   Stefano Stabellini
• [PATCH v4 6/7] xenvm: add a simple PSCI node and a second cpu   Stefano Stabellini
• [PATCH v4 7/7] mach-virt: support Xen hypercalls for shutdown and reboot   Stefano Stabellini
• [PATCH v4 7/7] mach-virt: support Xen hypercalls for shutdown and reboot   Stefano Stabellini
• [PATCH v8 1/2] arm: introduce psci_smp_ops   Stefano Stabellini
• [PATCH v4 7/7] mach-virt: support Xen hypercalls for shutdown and reboot   Stefano Stabellini
• [PATCH v8 2/2] ARM: Enable selection of SMP operations at boot time   Stefano Stabellini
• [PATCH v8 1/2] arm: introduce psci_smp_ops   Stefano Stabellini
• [PATCH v8 1/2] arm: introduce psci_smp_ops   Stefano Stabellini
• [PATCH v4 2/7] xen/arm: SMP support   Stefano Stabellini
• [PATCH v5 0/7] xen/arm: move to mach-virt and support SMP   Stefano Stabellini
• [PATCH v5 1/7] xen/arm: actually pass a non-NULL percpu pointer to request_percpu_irq   Stefano Stabellini
• [PATCH v5 2/7] xen/arm: implement HYPERVISOR_vcpu_op   Stefano Stabellini
• [PATCH v5 3/7] xen/arm: SMP support   Stefano Stabellini
• [PATCH v5 4/7] xen: move the xenvm machine to mach-virt   Stefano Stabellini
• [PATCH v5 5/7] xen/arm: XEN selects ARM_PSCI   Stefano Stabellini
• [PATCH v5 6/7] xenvm: add a simple PSCI node and a second cpu   Stefano Stabellini
• [PATCH v5 7/7] xen/arm: use sched_op hypercalls for machine reboot and power off   Stefano Stabellini
• [PATCH v4 2/7] xen/arm: SMP support   Stefano Stabellini
• [PATCH v4 2/7] xen/arm: SMP support   Stefano Stabellini
• [PATCH v4 2/7] xen/arm: SMP support   Stefano Stabellini
• [PATCH v5 0/7] xen/arm: move to mach-virt and support SMP   Stefano Stabellini
• [PATCH v8 1/2] arm: introduce psci_smp_ops   Stefano Stabellini
• [PATCH v8 2/2] ARM: Enable selection of SMP operations at boot time   Stefano Stabellini
• [PATCH -next] xen/arm: remove duplicated include from enlighten.c   Stefano Stabellini
• [PATCH 0/2 v9] arm: introduce psci_smp_ops   Stefano Stabellini
• [PATCH v9 1/2] arm: introduce psci_smp_ops   Stefano Stabellini
• [PATCH v9 2/2] ARM: Enable selection of SMP operations at boot time   Stefano Stabellini
• linux-next: manual merge of the arm-soc tree with the xen-arm tree   Stefano Stabellini
• [PATCH v9 1/2] arm: introduce psci_smp_ops   Stefano Stabellini
• linux-next build error (at91) - use of bool in mach/arch.h   Stefano Stabellini
• linux-next: manual merge of the arm-soc tree with the xen-arm tree   Stefano Stabellini
• [PATCH] ARM: add the "bool" type definition to asm/mach/arch.h   Stefano Stabellini
• [GIT PULL] (arm/xen) 3.9-rc3-smp-6-tag   Stefano Stabellini
• linux-next build error (at91) - use of bool in mach/arch.h   Stefano Stabellini
• [PATCH v10 0/2] (arm-soc for v3.10) arm: introduce psci_smp_ops   Stefano Stabellini
• [PATCH v10 1/2] arm: introduce psci_smp_ops   Stefano Stabellini
• [PATCH v10 2/2] ARM: Enable selection of SMP operations at boot time   Stefano Stabellini
• [PATCHv2] ARM:dts:omap4-panda:Update the LED support for the panda DTS   Vincent Stehlé
• [PATCH v3 2/7] USB: EHCI: make ehci-spear a separate driver   Alan Stern
• [PATCH v3 7/7] USB: OHCI: avoid conflicting platform drivers   Alan Stern
• [PATCH V5 0/6] USB: EHCI multiplatform for 3.10   Alan Stern
• [PATCH V5 6/6] USB: OHCI: avoid conflicting platform drivers   Alan Stern
• [PATCH 18/21] usb: phy: tegra: don't call into tegra-ehci directly   Alan Stern
• [PATCH] MAINTAINERS: Add maintainer for LPC32xx   Roland Stigge
• [PATCH] ARM: LPC32xx: changed lpc23xx_restart to lpc32xx_restart   Roland Stigge
• [PATCH 19/21] USB: lpc32xx: ISP1301 needs USB_PHY   Roland Stigge
• 2013 Linux Plumbers ACPI/PM, PCI Microconference proposal call for participaton   Myron Stowe
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Grygorii Strashko
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Grygorii Strashko
• [RFC v1 0/1] introduce regulator chain locking scheme   Grygorii Strashko
• [RFC v1] regulator: core: introduce regulator chain locking scheme   Grygorii Strashko
• [RFC v1] regulator: core: introduce regulator chain locking scheme   Grygorii Strashko
• Multiple issues with omap4 panda es in linux next   Grygorii Strashko
• Multiple issues with omap4 panda es in linux next   Grygorii Strashko
• [PATCH v2 12/13] ARM: move sp804 and integrator timers to drivers/clocksource   John Stultz
• [PATCH v2 12/13] ARM: move sp804 and integrator timers to drivers/clocksource   John Stultz
• [PATCH 0/4] ARM 64 bit sched_clock take #2   John Stultz
• [PATCH 07/23] i2c: s3c2410: make header file local   Heiko Stübner
• [PATCH v4 00/14] ARM: samsung-time: Prepare for multiplatform support   Heiko Stübner
• [PATCH] ARM: S3C24XX: Correct NR_IRQS definition for s3c2440   Heiko Stübner
• [PATCH] ARM: S3C24XX: Fix interrupt pending register offset of the EINT controller   Heiko Stübner
• [PATCH] pinctrl: Add pinctrl-s3c24xx driver   Heiko Stübner
• [PATCH v2 0/3] ARM: S3C24XX: Add devicetree support for s3c2416   Heiko Stübner
• [PATCH] pinctrl: Add pinctrl-s3c24xx driver   Heiko Stübner
• [PATCH] pinctrl: Add pinctrl-s3c24xx driver   Heiko Stübner
• [PATCH] pinctrl: Add pinctrl-s3c24xx driver   Heiko Stübner
• [PATCH] pinctrl: Add pinctrl-s3c24xx driver   Heiko Stübner
• [PATCH v2] pinctrl: Add pinctrl-s3c24xx driver   Heiko Stübner
• [PATCH v2] pinctrl: Add pinctrl-s3c24xx driver   Heiko Stübner
• [PATCH v2] pinctrl: Add pinctrl-s3c24xx driver   Heiko Stübner
• [PATCH v3] pinctrl: Add pinctrl-s3c24xx driver   Heiko Stübner
• [PATCH] ASoC: samsung: fix neo1973-wm8753 compilation   Heiko Stübner
• [PATCH v3 05/10] i2c: s3c2410: make header file local   Heiko Stübner
• [PATCH v5 00/14] ARM: samsung-time: Prepare for multiplatform support   Heiko Stübner
• [PATCH v5 00/14] ARM: samsung-time: Prepare for multiplatform support   Heiko Stübner
• [PATCH] ARM: S3C24XX: add devicetree support for smdk2416   Heiko Stübner
• [PATCH v2] ARM: S3C24XX: add devicetree support for smdk2416   Heiko Stübner
• [PATCH v4] pinctrl: Add pinctrl-s3c24xx driver   Heiko Stübner
• [PATCH 08/30] i2c: s3c2410: make header file local   Heiko Stübner
• [PATCH 0/3] ARM: S3C24XX: dma cleanups for s3c2412 and s3c2443   Heiko Stübner
• [PATCH 1/3] ARM: S3C24XX: split s3c2412 spi dma channels   Heiko Stübner
• [PATCH 2/3] ARM: S3C24XX: dma-s3c2443 - do not write into arbitary bits   Heiko Stübner
• [PATCH 3/3] ARM: S3C24XX: remove obsolete s3c2412 specific dma settings   Heiko Stübner
• [PATCH 12/21] irqchip: s3c24xx: add missing __init annotations   Heiko Stübner
• Video card photo Supply与您共享了相册。   Video card photo Supply
• [PATCH 15/21] staging: comedi/dawboard2000: use mdelay for large delays   H Hartley Sweeten
• [RFC/PATCH v2 0/2] Device Tree support for CMA (Contiguous Memory Allocator)   Marek Szyprowski
• [RFC/PATCH v2 1/2] drivers: dma-contiguous: clean source code and prepare for device tree   Marek Szyprowski
• [RFC/PATCH v2 2/2] drivers: dma-contiguous: add initialization from device tree   Marek Szyprowski
• [RFC/PATCH v2 2/2] drivers: dma-contiguous: add initialization from device tree   Marek Szyprowski
• [RFC/PATCH v2 2/2] drivers: dma-contiguous: add initialization from device tree   Marek Szyprowski
• [PATCH] ARM64: kernel: compiling issue: need define readq and writeq for driver module using.   Chen Gang F T
• [PATCH v2 04/11] ASoC: fsl-ssi: Add SACNT definitions   Timur Tabi
• [PATCH v2 05/11] ASoC: fsl-ssi: Add support for imx-pcm-fiq   Timur Tabi
• [PATCH v2 10/11] ASoC: fsl: Move fsl-ssi binding doc to sound/   Timur Tabi
• [PATCH v2 08/11] ASoC: fsl-ssi: imx ac97 support   Timur Tabi
• [PATCH v2 06/11] ASoC: fsl-ssi: Setup generic imx dma params   Timur Tabi
• [PATCH v2 01/11] ASoC: phycore-ac97: Add DT support   Timur Tabi
• [PATCH v2 05/11] ASoC: fsl-ssi: Add support for imx-pcm-fiq   Timur Tabi
• [PATCH v2 05/11] ASoC: fsl-ssi: Add support for imx-pcm-fiq   Timur Tabi
• [PATCH v2 05/11] ASoC: fsl-ssi: Add support for imx-pcm-fiq   Timur Tabi
• [PATCH v3 00/15] ASoC: fsl-ssi: ac97-slave support   Timur Tabi
• [RFC PATCH arm: initial TI-Nspire support]   Daniel Tang
• [RFC PATCH arm: initial TI-Nspire support]   Daniel Tang
• [RFC PATCH arm: initial TI-Nspire support]   Daniel Tang
• [RFC PATCH arm: initial TI-Nspire support]   Daniel Tang
• [RFC PATCH arm: initial TI-Nspire support]   Daniel Tang
• [PATCH] Remove trailing whitespace in arch/arm/Makefile   Daniel Tang
• [RFC PATCH arm: initial TI-Nspire support]   Daniel Tang
• [RFC PATCH arm: initial TI-Nspire support]   Daniel Tang
• [RFC PATCH arm: initial TI-Nspire support]   Daniel Tang
• [RFC PATCHv2 arm: initial TI-Nspire support]   Daniel Tang
• [RFC PATCHv2 arm: initial TI-Nspire support]   Daniel Tang
• [PATCH] ARM: makefile: add tuning options for Armada 370/XP   Willy Tarreau
• [PATCH] ARM: makefile: add tuning options for Armada 370/XP   Willy Tarreau
• [PATCH] net: mv643xx_eth: Add GRO support   Willy Tarreau
• [PATCH] net: mv643xx_eth: Add GRO support   Willy Tarreau
• [PATCH] net: mv643xx_eth: Add GRO support   Willy Tarreau
• [PATCH] net: mv643xx_eth: Add GRO support   Willy Tarreau
• [PATCH] net: mv643xx_eth: Add GRO support   Willy Tarreau
• [PATCH] net: mv643xx_eth: Add GRO support   Willy Tarreau
• [PATCH] net: mv643xx_eth: Add GRO support   Willy Tarreau
• net: mvneta: fix improper tx queue usage in mvneta_tx()   Willy Tarreau
• net: mvneta: fix improper tx queue usage in mvneta_tx()   Willy Tarreau
• MVEBU and MVNETA driver   Willy Tarreau
• MVEBU and MVNETA driver   Willy Tarreau
• MVEBU and MVNETA driver   Willy Tarreau
• MVEBU and MVNETA driver   Willy Tarreau
• [PATCH v9 4/6] ARM: davinci: Add a remoteproc driver implementation for OMAP-L13x DSP   Tivy, Robert
• [PATCH v9 1/6] rpmsg: Process all available messages in virtqueue callback   Tivy, Robert
• [PATCH v9 4/6] ARM: davinci: Add a remoteproc driver implementation for OMAP-L13x DSP   Tivy, Robert
• [PATCH v9 1/6] rpmsg: Process all available messages in virtqueue callback   Tivy, Robert
• [GIT PULL] KVM/ARM Changes for 3.10   Marcelo Tosatti
• [GIT PULL] KVM/ARM Changes for 3.10   Marcelo Tosatti
• [PATCH 04/10] arm: zynq: Load scu baseaddress at run time   Steffen Trumtrar
• [RFC v1] regulator: core: introduce regulator chain locking scheme   Andrii Tseglytskyi
• [PATCH RFC] clk: divider: Tolerate 0 divider for one based dividers   Mike Turquette
• [PATCH RFC] clk: divider: Tolerate 0 divider for one based dividers   Mike Turquette
• [RFC][PATCH 0/5] Introduce .get_voltage callback into voltdm   Mike Turquette
• [PATCH] clk: add LP8788 clock driver   Mike Turquette
• [PATCH] clk: add LP8788 clock driver   Mike Turquette
• [PATCH 1/3] clk: ux500: Add support for sysctrl clocks   Mike Turquette
• [PATCH v4] clk: add si5351 i2c common clock driver   Mike Turquette
• [PATCH 1/1] clk: fix clk_mux::flags kerneldoc   Mike Turquette
• RFC v2: Zynq Clock Controller   Mike Turquette
• [PATCH] clk: divider: Use DIV_ROUND_CLOSEST   Mike Turquette
• [PATCH] ARM: mvebu: Use common of_clk_init() function   Mike Turquette
• [PATCH] clk: divider: Introduce CLK_DIVIDER_ALLOW_ZERO flag   Mike Turquette
• [PATCH] ARM: mvebu: Use common of_clk_init() function   Mike Turquette
• [RFC PATCH v1 0/3] clk: implement remuxing during set_rate   Mike Turquette
• [PATCH v2 0/6] clk: sunxi: gates support   Mike Turquette
• [PATCH v2 1/7] clk: sunxi: Add support for AXI, AHB, APB0 and APB1 gates   Mike Turquette
• [PATCH v2 6/7] clk: sunxi: drop CLK_IGNORE_UNUSED   Mike Turquette
• [PATCH v2 7/7] clk: sunxi: drop an unnecesary kmalloc   Mike Turquette
• [PATCH 00/21] Various fixes and extensions to Exynos4 clock driver   Mike Turquette
• [PATCH 4/6] pinctrl: sunxi: add clock support   Mike Turquette
• [PATCH v2 1/7] clk: sunxi: Add support for AXI, AHB, APB0 and APB1 gates   Mike Turquette
• [PATCH 4/6] pinctrl: sunxi: add clock support   Mike Turquette
• [PATCH v2 1/7] clk: sunxi: Add support for AXI, AHB, APB0 and APB1 gates   Mike Turquette
• [PATCH v9 00/14] Tegra114 clockframework   Mike Turquette
• [PATCH] clk: exynos4: export clocks required for fimc-is   Mike Turquette
• [PATCH] clk: add helper to set flags for clk-provider   Mike Turquette
• [PATCHv2 00/10] ARM: sunxi: Architecture cleanups and rework   Mike Turquette
• [v5] clk: add si5351 i2c common clock driver   Mike Turquette
• [PATCH V3 1/3] clk: ux500: Add support for sysctrl clocks   Mike Turquette
• [PATCH V4 0/3] clk: Fixup issues for clk_set_parent   Mike Turquette
• [PATCH v2] clk: add LP8788 clock driver   Mike Turquette
• [PATCH 2/3] clk: ux500: abx500: Define clock tree for ab850x   Mike Turquette
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Mike Turquette
• [PATCHv7 07/17] clk: mvebu: add more PCIe clocks for Armada XP   Mike Turquette
• [PATCHv7 06/17] clk: mvebu: create parent-child relation for PCIe clocks on Armada 370   Mike Turquette
• [PATCH V3 1/3] clk: ux500: Add support for sysctrl clocks   Mike Turquette
• [PATCH 2/3] clk: ux500: abx500: Define clock tree for ab850x   Mike Turquette
• [PATCH 0/3] fixed-rate and fixed-factor clocks in composite clock   Mike Turquette
• [PATCH 1/3] clk: composite: rename 'div' references to 'rate'   Mike Turquette
• [PATCH 2/3] clk: composite: allow fixed rates & fixed dividers   Mike Turquette
• [PATCH v2 3/3] clk: sunxi: Unify oscillator clock   Mike Turquette
• [PATCH] clk: Properly handle notifier return values   Mike Turquette
• [PATCH 2/3] clk: composite: allow fixed rates & fixed dividers   Mike Turquette
• [PATCH 1/3] clk: composite: rename 'div' references to 'rate'   Mike Turquette
• [PATCH v2 1/2] clk: composite: rename 'div' references to 'rate'   Mike Turquette
• [PATCH v2 2/2] clk: composite: allow fixed rates & fixed dividers   Mike Turquette
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Mike Turquette
• [PATCH v8 1/7] media: V4L2: add temporary clock helpers   Mike Turquette
• [PATCH] clk: tegra: Fix cdev1 and cdev2 IDs   Mike Turquette
• [PATCH] clk: tegra: fix enum tegra114_clk to match binding   Mike Turquette
• [PATCH v8 1/7] media: V4L2: add temporary clock helpers   Mike Turquette
• [PATCH v3] clk: add device tree fixed-factor-clock binding support   Mike Turquette
• [PATCH v8] clk: add si5351 i2c common clock driver   Mike Turquette
• [PATCH] clk: si5351: Add gapless tuning for SI5351 PLL   Mike Turquette
• [PATCH v2 3/3] clk: sunxi: Unify oscillator clock   Mike Turquette
• [PATCH] clk: si5351: Add gapless tuning for SI5351 PLL   Mike Turquette
• [PATCH] clk: vt8500: Missing breaks in vtwm_pll_round_rate/_set_rate.   Mike Turquette
• [PATCH] clk: si5351: make clk-si5351 depend on CONFIG_OF   Mike Turquette
• [PATCH] clk: Always notify whole subtree when reparenting   Mike Turquette
• [PATCH] clk: vexpress: Add separate SP810 driver   Mike Turquette
• [PATCH] clk: vexpress: Add separate SP810 driver   Mike Turquette
• [PATCH] clk: vexpress: Add separate SP810 driver   Mike Turquette
• linux-next ARM multi-platform randconfig errors   Mike Turquette
• [PATCH 4/4] ARM: nomadik: register clocksource from device tree   Mike Turquette
• [PATCH 3/4] ARM: nomadik: convert all clocks except timer to dt   Mike Turquette
• [PATCH V4 1/6] clk: OMAP: introduce device tree binding to kernel clock data   Mike Turquette
• [PATCH] clk: add option to keep boot clocks on   Mike Turquette
• [PATCH v2] clk: add clk_ignore_unused option to keep boot clocks on   Mike Turquette
• [GIT PULL] clk: changes for 3.10   Mike Turquette
• [RFC] dmaengine: omap-dma: Start DMA without delay   Peter Ujfalusi
• [RFC v2] dmaengine: omap-dma: Start DMA without delay for cyclic channels   Peter Ujfalusi
• [RFC v2] dmaengine: omap-dma: Start DMA without delay for cyclic channels   Peter Ujfalusi
• [PATCH v3] ARM: omap2: twl-common: Add default power configuration   Peter Ujfalusi
• [PATCH v3] ARM: omap2: twl-common: Add default power configuration   Peter Ujfalusi
• [PATCH v4] ARM: omap2: twl-common: Add default power configuration   Peter Ujfalusi
• [RFC v2] dmaengine: omap-dma: Start DMA without delay for cyclic channels   Peter Ujfalusi
• [RFC v2] dmaengine: omap-dma: Start DMA without delay for cyclic channels   Peter Ujfalusi
• [RFC v2] dmaengine: omap-dma: Start DMA without delay for cyclic channels   Peter Ujfalusi
• [RFC v2] dmaengine: omap-dma: Start DMA without delay for cyclic channels   Peter Ujfalusi
• [RFC v2] dmaengine: omap-dma: Start DMA without delay for cyclic channels   Peter Ujfalusi
• [PATCH] ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module   Peter Ujfalusi
• Query on pinctrl usage for DT nodes   Peter Ujfalusi
• Query on pinctrl usage for DT nodes   Peter Ujfalusi
• Query on pinctrl usage for DT nodes   Peter Ujfalusi
• Query on pinctrl usage for DT nodes   Peter Ujfalusi
• [PATCH V2] video: implement a simple framebuffer driver   Geert Uytterhoeven
• [PATCH V2] video: implement a simple framebuffer driver   Geert Uytterhoeven
• linux-next build error (at91) - use of bool in mach/arch.h   Geert Uytterhoeven
• omap cpufreq driver in multi-platform kernels   Eduardo Valentin
• [PATCH 14/30] thermal/exynos: remove unnecessary header inclusions   Eduardo Valentin
• [v2,01/14] thermal: Rename driver 'kirkwood' -> 'mvebu'   Eduardo Valentin
• [v2,02/14] thermal: mvebu: Rename symbols 'kirkwood' -> 'mvebu'   Eduardo Valentin
• [v2,01/14] thermal: Rename driver 'kirkwood' -> 'mvebu'   Eduardo Valentin
• [v2,03/14] thermal: mvebu: Move MODULE_DEVICE_TABLE upwards   Eduardo Valentin
• [v2, 04/14] thermal: mvebu: Remove unneeded variable initialization   Eduardo Valentin
• [v2,05/14] thermal: mvebu: Convert to devm_ioremap_resource()   Eduardo Valentin
• [v2,06/14] thermal: mvebu: Fix license declaration   Eduardo Valentin
• [v2,07/14] thermal: mvebu: Rename kirkwood definitions to mvebu   Eduardo Valentin
• [v2,01/14] thermal: Rename driver 'kirkwood' -> 'mvebu'   Eduardo Valentin
• [v2, 04/14] thermal: mvebu: Remove unneeded variable initialization   Eduardo Valentin
• [v2,05/14] thermal: mvebu: Convert to devm_ioremap_resource()   Eduardo Valentin
• [v2,06/14] thermal: mvebu: Fix license declaration   Eduardo Valentin
• [v2,01/14] thermal: Rename driver 'kirkwood' -> 'mvebu'   Eduardo Valentin
• [PATCH 1/3] arm: dts: introduce config HAS_BANDGAP   Eduardo Valentin
• [PATCH 2/3] arm: dts: add bandgap entry for OMAP443x devices   Eduardo Valentin
• [PATCH 3/3] arm: add bandgap entry for OMAP4460 devices   Eduardo Valentin
• [PATCH 0/3] arm: omap: add ti bandap device on DT entries   Eduardo Valentin
• [PATCHv2 6/6] video: fb: vt8500: Convert framebuffer drivers to standardized binding   Tomi Valkeinen
• [PATCHv3 0/6] fb: vt8500: patches for 3.10   Tomi Valkeinen
• [PATCH] video: mxsfb: Adapt to new videomode API   Tomi Valkeinen
• [PATCH 12/30] video/exynos: remove unnecessary header inclusions   Tomi Valkeinen
• [PATCH] video: mxsfb: Adapt to new videomode API   Tomi Valkeinen
• [PATCH] video: mxsfb: Adapt to new videomode API   Tomi Valkeinen
• linux-next ARM multi-platform randconfig errors   Tomi Valkeinen
• [GIT PULL] omap dss board clean-up for v3.10 merge window   Tomi Valkeinen
• Multiple issues with omap4 panda es in linux next   Tomi Valkeinen
• Multiple issues with omap4 panda es in linux next   Tomi Valkeinen
• [GIT PULL] omap dss board clean-up for v3.10 merge window   Tomi Valkeinen
• [PATCH V2] video: implement a simple framebuffer driver   Tomi Valkeinen
• [PATCH V2] video: implement a simple framebuffer driver   Tomi Valkeinen
• [PATCH V2] video: implement a simple framebuffer driver   Tomi Valkeinen
• [PATCH V2] video: implement a simple framebuffer driver   Tomi Valkeinen
• [PATCH V2] video: implement a simple framebuffer driver   Tomi Valkeinen
• [PATCH 13/21] iommu: tegra: print dma_addr_t using %lld   Sethi Varun-B16395
• [PATCH 1/5] spi/mxs: Fix extra CS pulses and read mode in multi-transfer messages   Marek Vasut
• [PATCH 2/5] spi/mxs: Fix chip select control bits in DMA mode   Marek Vasut
• [PATCH 4/5] spi/mxs: Remove bogus setting of ssp clk rate field   Marek Vasut
• [PATCH 5/5] spi/mxs: Fix multiple slave bug and don't set clock for each xfer   Marek Vasut
• [PATCH] ARM: mxs: Slow down the I2C clock speed   Marek Vasut
• [PATCH 2/5] spi/mxs: Fix chip select control bits in DMA mode   Marek Vasut
• [PATCH 4/5] spi/mxs: Remove bogus setting of ssp clk rate field   Marek Vasut
• [PATCH 2/5] spi/mxs: Fix chip select control bits in DMA mode   Marek Vasut
• [PATCH 4/5] spi/mxs: Remove bogus setting of ssp clk rate field   Marek Vasut
• [PATCH 1/5] spi/mxs: Fix extra CS pulses and read mode in multi-transfer messages   Marek Vasut
• [PATCH] pinctrl: imx5: fix SD2_DATA1 pad AUDMUX_AUD4 configuration   Marek Vasut
• [PATCH 1/5] spi/mxs: Fix extra CS pulses and read mode in multi-transfer messages   Marek Vasut
• [PATCH] ARM: mxs: Slow down the I2C clock speed   Marek Vasut
• [PATCH V2 01/12] spi/mxs: Always set LOCK_CS   Marek Vasut
• [PATCH V2 03/12] spi/mxs: Change flag arguments in txrx functions to bit flags   Marek Vasut
• [PATCH V2 05/12] spi/mxs: Fix chip select control bits in DMA mode   Marek Vasut
• [PATCH V2 08/12] spi/mxs: Fix race in setup method   Marek Vasut
• [PATCH V2 10/12] spi/mxs: Clean up setup_transfer function   Marek Vasut
• [PATCH V2 11/12] spi/mxs: Don't set clock for each xfer   Marek Vasut
• [PATCH 1/5] spi/mxs: Fix extra CS pulses and read mode in multi-transfer messages   Marek Vasut
• [PATCH] pinctrl: imx5: fix SD2_DATA1 pad AUDMUX_AUD4 configuration   Marek Vasut
• [PATCH] pinctrl: imx5: fix SD2_DATA1 pad AUDMUX_AUD4 configuration   Marek Vasut
• [PATCH V2 08/12] spi/mxs: Fix race in setup method   Marek Vasut
• [PATCH] pinctrl: imx5: fix SD2_DATA1 pad AUDMUX_AUD4 configuration   Marek Vasut
• [PATCH V2 08/12] spi/mxs: Fix race in setup method   Marek Vasut
• [PATCH] pinctrl: imx5: fix SD2_DATA1 pad AUDMUX_AUD4 configuration   Marek Vasut
• [PATCH 2/3] ARM: dts: mx53qsb: Add support for parallel display   Marek Vasut
• [PATCH] ARM: dts: imx23-olinuxino: Set the sdcard as non-removable   Marek Vasut
• [PATCH] ARM: dts: imx23-olinuxino: Set the sdcard as non-removable   Marek Vasut
• [PATCH] ARM: dts: imx23-olinuxino: Set the sdcard as non-removable   Marek Vasut
• [PATCH V2 01/12] spi/mxs: Always set LOCK_CS   Marek Vasut
• [PATCH] mxs/spi: Add SPI slave mode operation DT prop   Marek Vasut
• [PATCH v2] UCB1400: Pass ucb1400-gpio data through ac97 bus   Marek Vasut
• [PATCH v2] UCB1400: Pass ucb1400-gpio data through ac97 bus   Marek Vasut
• [PATCH] video: mxsfb: Fix colors display on lower color depth   Marek Vasut
• [PATCH 1/8] ARM: mx5: Add AUDMUX4 pinctrl data   Marek Vasut
• [PATCH 2/8] ARM: mx5: Add CAN1 pinctrl data   Marek Vasut
• [PATCH 3/8] ARM: mx5: Add I2C1 pinctrl data   Marek Vasut
• [PATCH 4/8] ARM: mx5: Add I2C2 pinctrl data   Marek Vasut
• [PATCH 5/8] ARM: mx5: Add NAND pinctrl data   Marek Vasut
• [PATCH 6/8] ARM: mx5: Add LCD IPU pinctrl data   Marek Vasut
• [PATCH 7/8] ARM: mx5: Add PWM1 pinctrl data   Marek Vasut
• [PATCH 8/8] ARM: mx5: Add support for DENX M53EVK   Marek Vasut
• [PATCH] video: imx: Add BGR666 support for parallel display   Marek Vasut
• [PATCH 1/8] ARM: mx5: Add AUDMUX4 pinctrl data   Marek Vasut
• [PATCH RESEND] video: mxsfb: Fix colors display on lower color depth   Marek Vasut
• [PATCH RESEND] video: mxsfb: Fix colors display on lower color depth   Marek Vasut
• [PATCH V2] video: imx: Add BGR666 support for parallel display   Marek Vasut
• [PATCH V2] ARM: mx5: Add support for DENX M53EVK   Marek Vasut
• [RFC][PATCH] video: imx: Select VIDEOMODE_HELPERS   Marek Vasut
• [RFC][PATCH] video: imx: Select VIDEOMODE_HELPERS   Marek Vasut
• [RFC][PATCH] video: imx: Select VIDEOMODE_HELPERS   Marek Vasut
• [PATCH V2] ARM: mx5: Add support for DENX M53EVK   Marek Vasut
• [RFC][PATCH] video: imx: Select VIDEOMODE_HELPERS   Marek Vasut
• [PATCH V2] video: imx: Select VIDEOMODE_HELPERS for parallel display   Marek Vasut
• [PATCH v9 1/2] ARM: davinci: dm365: add support for v4l2 video display   Greg Veintimilla
• [RFC PATCH v3 5/6] sched: pack the idle load balance   Arjan van de Ven
• [RFC PATCH v4 00/14] sched: packing small tasks   Arjan van de Ven
• [RFC PATCH v4 00/14] sched: packing small tasks   Arjan van de Ven
• [PATCH V2] DMA: PL330: Add check if device tree compatible   Padma Venkat
• [PATCH 1/3] clk: exynos: register audio subsystem clocks using common clock framework   Padma Venkat
• [PATCH 0/3] clk: Exynos: Register audio subsytem clocks using common clk framework   Padma Venkat
• [PATCH V4 3/3] clk: Fixup locking issues for clk_set_parent   Rajagopal Venkat
• [PATCH V4 3/3] clk: Fixup locking issues for clk_set_parent   Rajagopal Venkat
• [PATCH V3] DMA: PL330: Add check if device tree compatible   Padmavathi Venna
• [PATCH 1/2] ASoC: Samsung: return error if drvdata is not set   Padmavathi Venna
• [PATCH 2/2] ASoC: Samsung: set drvdata before adding secondary device   Padmavathi Venna
• [PATCH RESEND] ARM: SAMSUNG: dma: Remove unnecessary code   Padmavathi Venna
• [PATCH 1/3] clk: exynos: register audio subsystem clocks using common clock framework   Padmavathi Venna
• [PATCH 2/3] ARM: dts: add Exynos audio subsystem clock controller node   Padmavathi Venna
• [PATCH 3/3] ARM: dts: add clock provider information for i2s0 controller in Exynos5250   Padmavathi Venna
• [PATCH 0/3] clk: Exynos: Register audio subsytem clocks using common clk framework   Padmavathi Venna
• [PATCH 3/8] dmaengine: ste_dma40: Actually write the runtime configuration to registers   Rabin Vincent
• [PATCH 4/8] dmaengine: ste_dma40: Do not configure channels during an channel allocation   Rabin Vincent
• [PATCH 5/8] dmaengine: ste_dma40: Ensure src and dst registers are configured correctly   Rabin Vincent
• [PATCH 4/8] dmaengine: ste_dma40: Do not configure channels during an channel allocation   Rabin Vincent
• [PATCH 3/8] dmaengine: ste_dma40: Actually write the runtime configuration to registers   Rabin Vincent
• [PATCH 03/32 v3] dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s   Rabin Vincent
• [PATCH] ARM: dts: omap2plus: remove interrupt-parent property   Vishwanathrao Badarkhe, Manish
• [RFC PATCH arm: initial TI-Nspire support]   Fabian Vogt
• [RFC PATCH arm: initial TI-Nspire support]   Fabian Vogt
• [PATCH] ARM: ux500: update V-INTCORE constraints   Linus Walleij
• [PATCHv7 00/17] PCIe support for the Armada 370 and Armada XP SoCs   Linus Walleij
• [PATCH] pinctrl/abx500: fix ab8505 alternate function   Linus Walleij
• [PATCH 4/6] pinctrl: sunxi: add clock support   Linus Walleij
• [PATCH] pinctrl:sirf:re-arch and add support for new SiRFatlas6 SoC   Linus Walleij
• [PATCH 2/2] ARM: remove mach .init_irq for irqchip_init users   Linus Walleij
• [PATCH 0/3] gpio: remove GENERIC_GPIO completely   Linus Walleij
• [PATCHv5 0/7] arm: vt8500: Add support for pinctrl/gpio module   Linus Walleij
• [PATCH V5 1/9] gpio: tegra: add gpio wakeup source handling   Linus Walleij
• [PATCHv7 00/17] PCIe support for the Armada 370 and Armada XP SoCs   Linus Walleij
• [PATCH 1/6] pinctrl: add pinctrl driver for imx6dl   Linus Walleij
• [PATCH 0/6] Add initial imx6dl support   Linus Walleij
• [PATCH v2 12/13] ARM: move sp804 and integrator timers to drivers/clocksource   Linus Walleij
• [PATCH] pinctrl: imx5: fix SD2_DATA1 pad AUDMUX_AUD4 configuration   Linus Walleij
• [PATCH] pinctrl/nomadik: add device tree bindings for db8540   Linus Walleij
• [PATCH] pinctrl/pinconf: partial revert of pin config debugfs   Linus Walleij
• [PATCH] pinctrl/pinconfig: add debug interface   Linus Walleij
• [PATCH v2] pinctrl/pinconfig: add debug interface   Linus Walleij
• [PATCH] pinctrl/abx500: fix ab9540 alternate function   Linus Walleij
• [PATCHv5 0/7] arm: vt8500: Add support for pinctrl/gpio module   Linus Walleij
• [PATCH 1/9] ARM: ux500: Increase the size of the PRCMU's TCPM size   Linus Walleij
• [PATCH 2/9] ARM: ux500: Remove incorrect DB9540 PRCMU TCDM base location   Linus Walleij
• [PATCH 3/9] ARM: ux500: Supply a DTS file for the u8540 platform   Linus Walleij
• [PATCH 4/9] ARM: ux500: Move Snowball's thermal DT node into existing PRCMU one   Linus Walleij
• [PATCH 5/9] ARM: ux500: Over-ride TCDM size when booting the DB8540 platform   Linus Walleij
• [PATCH 6/9] ARM: ux500: Create a new of_dev_auxdata structure for u8540 enablement   Linus Walleij
• [PATCH 7/9] ARM: ux500: Add a VQMMC (level-shifting) regulator DT node for Snowball   Linus Walleij
• [PATCH 8/9] mfd: db8500-prcmu: Return early if the TCPM cannot be located   Linus Walleij
• [PATCH 9/9] mfd: db8500-prcmu: Support platform dependant device selection   Linus Walleij
• [PATCH 1/2] ARM: ux500: remove redundant DB8500_PIN_SLEEP definition   Linus Walleij
• [PATCH v2 2/2] ARM: ux500: 8500: add ab8500-musb pinctrl support   Linus Walleij
• [PATCH 3/6] pinctrl: samsung: Split pin bank description into two structures   Linus Walleij
• [PATCH 4/9] ARM: ux500: Move Snowball's thermal DT node into existing PRCMU one   Linus Walleij
• [PATCH 4/9] ARM: ux500: Move Snowball's thermal DT node into existing PRCMU one   Linus Walleij
• [PATCH 4/6] pinctrl: sunxi: add clock support   Linus Walleij
• [PATCH 4/6] pinctrl: sunxi: add clock support   Linus Walleij
• [PATCH] crypto: ux500: add missing comma   Linus Walleij
• [PATCH 00/14] Ux500 multiplatform v2   Linus Walleij
• [PATCH 01/14] ARM: ux500: move debugmacro to debug includes   Linus Walleij
• [PATCH 02/14] clk: ux500: pass clock base adresses in init call   Linus Walleij
• [PATCH 03/14] ARM: ux500: move mach/msp.h to <linux/platform_data/*>   Linus Walleij
• [PATCH 04/14] staging: ste_rmi4: kill platform_data hack   Linus Walleij
• [PATCH 05/14] mfd: prcmu: pass a base and size with the early initcall   Linus Walleij
• [PATCH 06/14] mfd: db8500-prcmu: get base address from resource   Linus Walleij
• [PATCH 07/14] ARM: ux500: move PM-related PRCMU functions to machine   Linus Walleij
• [PATCH 08/14] ARM: ux500: make debug macro stand-alone   Linus Walleij
• [PATCH 09/14] ARM: ux500: get rid of <mach/[hardware|db8500-regs].h>   Linus Walleij
• [PATCH 10/14] ARM: ux500: split out prcmu initialization   Linus Walleij
• [PATCH 11/14] ARM: ux500: make irqs.h local to platform   Linus Walleij
• [PATCH 12/14] ARM: ux500: make remaining headers local   Linus Walleij
• [PATCH 13/14] ARM: ux500: move to multiplatform   Linus Walleij
• [PATCH 14/14] ARM: ux500: build hotplug.o for ARMv7-a   Linus Walleij
• [PATCH 11/11] RFC: ARM: get PCI device IRQs from device tree   Linus Walleij
• [GIT PULL] ux500 multiplatform tags   Linus Walleij
• [GIT PULL] ux500 pinctrl patches   Linus Walleij
• [PATCH 1/6] pinctrl: samsung: Protect bank registers with a spinlock   Linus Walleij
• [PATCH 2/6] pinctrl: samsung: Include pinctrl-exynos driver data conditionally   Linus Walleij
• [PATCH 3/6] pinctrl: samsung: Split pin bank description into two structures   Linus Walleij
• [PATCH 4/6] pinctrl: samsung: Remove hardcoded register offsets   Linus Walleij
• [PATCH 5/6] pinctrl: samsung: Handle banks with two configuration registers   Linus Walleij
• [PATCH 6/6] pinctrl: Add pinctrl-s3c64xx driver   Linus Walleij
• [PATCH/RFC] ARM: shmobile: Disallow PINCTRL without GPIOLIB   Linus Walleij
• [PATCH 1/3] pinctrl: exynos5440: fix probe failure due to missing pin-list in config nodes   Linus Walleij
• [PATCH 2/3] pinctrl: exynos5440: add gpio interrupt support   Linus Walleij
• [PATCH 3/3] ARM: dts: list the interrupts generated by pin-controller on Exynos5440   Linus Walleij
• [PATCH] pinctrl:sirf:re-arch and add support for new SiRFatlas6 SoC   Linus Walleij
• [PATCH v2 0/3] Get rid of big array from imx pinctrl driver   Linus Walleij
• [PATCH] pinctrl: sunxi: Rename wemac functions to emac   Linus Walleij
• [RFC PATCH arm: initial TI-Nspire support]   Linus Walleij
• [RFC PATCH arm: initial TI-Nspire support]   Linus Walleij
• [RFC PATCH arm: initial TI-Nspire support]   Linus Walleij
• [RFC PATCH arm: initial TI-Nspire support]   Linus Walleij
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Linus Walleij
• [PATCH 1/5] gpio/omap: free irq domain in probe() failure paths   Linus Walleij
• [PATCH 2/5] gpio/omap: remove extra context restores in *_runtime_resume()   Linus Walleij
• [PATCH 3/5] gpio/omap: optimise interrupt service routine   Linus Walleij
• [PATCH 4/5] gpio/omap: force restore if context loss is not detectable   Linus Walleij
• [PATCH 4/5] gpio/omap: force restore if context loss is not detectable   Linus Walleij
• [PATCH 4/5] gpio/omap: force restore if context loss is not detectable   Linus Walleij
• [PATCH 1/3] ARM: pxa: remove cpu_is_xxx in gpio driver   Linus Walleij
• [PATCH 2/3] ARM: pxa: move PXA_GPIO_TO_IRQ macro   Linus Walleij
• [PATCH 3/3] ARM: mmp: add more compatible names in gpio driver   Linus Walleij
• [PATCH] PM / Runtime: Idle devices asynchronously after probe|release   Linus Walleij
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Linus Walleij
• [PATCH v2 12/13] ARM: move sp804 and integrator timers to drivers/clocksource   Linus Walleij
• [PATCH v6 0/3] of/pci: Provide common support for PCI DT parsing   Linus Walleij
• [PATCH v5 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC   Linus Walleij
• [PATCH] GPIO: gpio-generic: Remove kfree() from bgpio_remove call   Linus Walleij
• [PATCH 11/11] RFC: ARM: get PCI device IRQs from device tree   Linus Walleij
• [PATCH] cpufreq: dbx500: Round to closest available freq   Linus Walleij
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Linus Walleij
• [PATCH 11/11] RFC: ARM: get PCI device IRQs from device tree   Linus Walleij
• [PATCH 3/3] pinctrl: add MVF pinctrl driver   Linus Walleij
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Linus Walleij
• [PATCH] ARM: ux500: DT: Rename root node "soc-u9500" into "soc-ux500"   Linus Walleij
• [PATCH] ARM: ux500: Fix intcore regulator name   Linus Walleij
• [PATCH 1/5] ARM: ux500: Move DMA40 platform data includes file out to include/   Linus Walleij
• [PATCH 3/8] dmaengine: ste_dma40: Actually write the runtime configuration to registers   Linus Walleij
• [PATCH] spi: s3c64xx: let device core setup the default pin configuration   Linus Walleij
• [PATCH v6 0/3] of/pci: Provide common support for PCI DT parsing   Linus Walleij
• [PATCH v2] ARM: ux500: DT: Rename root node "soc-u9500" into "soc"   Linus Walleij
• [V3 patch 05/19] ARM: ux500: cpuidle: replace for_each_online_cpu by for_each_possible_cpu   Linus Walleij
• [PATCH v4] pinctrl: Add pinctrl-s3c24xx driver   Linus Walleij
• [PATCH v2] UCB1400: Pass ucb1400-gpio data through ac97 bus   Linus Walleij
• [PATCH v7 3/3] of/pci: mips: convert to common of_pci_range_parser   Linus Walleij
• [PATCH v3] pinctrl/pinconfig: add debug interface   Linus Walleij
• [PATCH v3] pinctrl/pinconfig: add debug interface   Linus Walleij
• [PATCH 1/4] clocksource: nomadik-mtu: fix up clocksource/timer   Linus Walleij
• [PATCH v3] ARM: pci: create pci_common_init_dev()   Linus Walleij
• [RESEND PATCH 00/12] Integrator/AP PCI DT mappings   Linus Walleij
• [RESEND PATCH 01/12] Documentation/devicetree: add a small note on PCI   Linus Walleij
• [RESEND PATCH 02/12 v4] ARM: pci: create pci_common_init_dev()   Linus Walleij
• [RESEND PATCH 03/12] ARM: integrator: merge PCIv3 driver into one file   Linus Walleij
• [RESEND PATCH 04/12] ARM: integrator: convert PCIv3 bridge to platform device   Linus Walleij
• [RESEND PATCH 05/12] ARM: integrator: grab PCI error IRQ in probe()   Linus Walleij
• [RESEND PATCH 06/12] ARM: integrator: move PCI base address grab to probe   Linus Walleij
• [RESEND PATCH 07/12] ARM: integrator: move V3 register definitions into driver   Linus Walleij
• [RESEND PATCH 08/12] ARM: integrator: remap PCIv3 base dynamically   Linus Walleij
• [RESEND PATCH 09/12] ARM: integrator: move VGA base assignment   Linus Walleij
• [RESEND PATCH 10/12] ARM: integrator: move static ioremapping into PCIv3 driver   Linus Walleij
• [RESEND PATCH 11/12] ARM: integrator: basic PCIv3 device tree support   Linus Walleij
• [RESEND PATCH 12/12] ARM: integrator: get PCI device IRQs from device tree   Linus Walleij
• [PATCH 1/4] clocksource: nomadik-mtu: fix up clocksource/timer   Linus Walleij
• [PATCH 2/4] clocksource: nomadik-mtu: support of probe   Linus Walleij
• [PATCH 3/4] ARM: nomadik: convert all clocks except timer to dt   Linus Walleij
• [PATCH 4/4] ARM: nomadik: register clocksource from device tree   Linus Walleij
• [PATCH 00/23] U300 device tree series   Linus Walleij
• [PATCH 01/23] ARM: u300: fix ages old copy/paste bug   Linus Walleij
• [PATCH 02/23] ARM: u300: enabled delaytimer on the U300   Linus Walleij
• [PATCH 03/23] ARM: u300: device tree support for the timer   Linus Walleij
• [PATCH 04/23] pinctrl: u300 device tree support   Linus Walleij
• [PATCH 05/23] pinctrl: coh901: add device tree support   Linus Walleij
• [PATCH 06/23] ARM: u300: basic device tree support   Linus Walleij
• [PATCH 07/23] i2c: stu300: device tree support   Linus Walleij
• [PATCH 08/23] ARM: u300: register I2C bus drivers from device tree   Linus Walleij
• [PATCH 09/23] watchdog: coh901327: devicetree support   Linus Walleij
• [PATCH 10/23] ARM: u300: add the COH 901 327 watchdog to device tree   Linus Walleij
• [PATCH 11/23] rtc: coh901331: add devicetree support   Linus Walleij
• [PATCH 12/23] ARM: u300: add RTC to device tree   Linus Walleij
• [PATCH 13/23] regulator: ab3100: refactor probe to use IDs   Linus Walleij
• [PATCH 14/23] regulator: ab3100: device tree support   Linus Walleij
• [PATCH 15/23] ARM: u300: set up board power from device tree   Linus Walleij
• [PATCH 16/23] ARM: u300: support regulators in the device tree   Linus Walleij
• [PATCH 17/23] ARM: u300: enable MMC/SD card from device tree   Linus Walleij
• [PATCH 18/23] dma: coh901318: add devicetree support   Linus Walleij
• [PATCH 19/23] ARM: u300: add the COH 901 318 DMAC to device tree   Linus Walleij
• [PATCH 20/23] ARM: u300: add SPI PL022 to the device tree   Linus Walleij
• [PATCH 20/23] ARM: u300: add SPI PL022 to the device tree   Linus Walleij
• [PATCH 21/23] ARM: u300: probe the U300 dummy-spichip from device tree   Linus Walleij
• [PATCH 22/23] ARM: u300: add FSMC flash into the device tree   Linus Walleij
• [PATCH 23/23] ARM: u300: delete all static board data   Linus Walleij
• gpio-pxa initcall level change and machine init breakage   Linus Walleij
• [PATCH] ARM: ux500: Supply a DTS file for the u8540 platform   Linus Walleij
• [PATCH] ARM: ux500: Supply a DTS file for the u8540 platform   Linus Walleij
• [PATCH] ARM: ux500: Over-ride TCDM size when booting the DB8540 platform   Linus Walleij
• [PATCH 1/2] pinctrl: s3c64xx: Fix build error caused by undefined chained_irq_enter   Linus Walleij
• [PATCH 2/2] pinctrl: samsung: Fix link error with CONFIG_PINCTRL_EXYNOS disabled   Linus Walleij
• [PATCH] pinctrl: move subsystem mutex to pinctrl_dev struct   Linus Walleij
• [PATCH v2] pinctrl: move subsystem mutex to pinctrl_dev struct   Linus Walleij
• [PATCH 1/8] dmaengine: ste_dma40: Assign memcpy channels in the driver   Linus Walleij
• [PATCH] pinctrl/pinconfig: fix misplaced goto   Linus Walleij
• [PATCH 2/2] pinctrl: samsung: Fix link error with CONFIG_PINCTRL_EXYNOS disabled   Linus Walleij
• [PATCH 02/32] dmaengine: ste_dma40: Move default memcpy configs into the driver   Linus Walleij
• [PATCH 03/32 v2] dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s   Linus Walleij
• [PATCH 1/8] dmaengine: ste_dma40: Assign memcpy channels in the driver   Linus Walleij
• gpio-pxa initcall level change and machine init breakage   Linus Walleij
• [PATCH 04/32] dmaengine: ste_dma40: Amalgamate DMA source and destination channel numbers   Linus Walleij
• [PATCH 05/32] dmaengine: ste_dma40: Supply macros to resolve 'src' and 'dst' directions   Linus Walleij
• [PATCH 06/32] ARM: ux500: Strip out duplicate USB DMA configuration   Linus Walleij
• [PATCH 07/32] ARM: ux500: Supply address location names for the DMA40 DMA controller   Linus Walleij
• [PATCH 08/32] dmaengine: ste_dma40: Optimise local MAX() macro   Linus Walleij
• [PATCH 09/32] ARM: ux500: Remove unused 'data_width' attributes from SDI DMA configs   Linus Walleij
• [PATCH 10/32] ARM: ux500: Remove unused 'data_width' attributes from SSP DMA configs   Linus Walleij
• [PATCH 11/32] ARM: ux500: Remove unused 'data_width' attributes from UART DMA configs   Linus Walleij
• [PATCH 04/32] dmaengine: ste_dma40: Amalgamate DMA source and destination channel numbers   Linus Walleij
• [PATCH 12/32] ARM: ux500: Remove superfluous 'psize' attribute from Audio platform data   Linus Walleij
• [PATCH 13/32] dmaengine: ste_dma40: Calculate number of logical channels from physical ones   Linus Walleij
• [PATCH 14/32] dmaengine: ste_dma40: Remove 'always true' checking   Linus Walleij
• [PATCH 01/32] dmaengine: ste_dma40: Assign memcpy channels in the driver   Linus Walleij
• [PATCH 15/32] dmaengine: ste_dma40: Separate Logical Global Interrupt Mask (GIM) unmasking   Linus Walleij
• [PATCH 16/32] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()   Linus Walleij
• [PATCH 17/32] dmaengine: ste_dma40: Remove redundant argument from d40_phy_cfg()   Linus Walleij
• [PATCH 17/32] dmaengine: ste_dma40: Remove redundant argument from d40_phy_cfg()   Linus Walleij
• [PATCH 18/32] dmaengine: ste_dma40: Don't configure runtime configurable setup during allocate   Linus Walleij
• [PATCH 19/32] dmaengine: ste_dma40: Move more setup into the configuration routines   Linus Walleij
• [PATCH 20/32] dmaengine: ste_dma40: Move rev error-check up to revision acquisition   Linus Walleij
• [PATCH 21/32 v2] dmaengine: ste_dma40: Also report the number of logical channels   Linus Walleij
• [PATCH 22/32] dmaengine: ste_dma40: Allocate plat_data on declaration   Linus Walleij
• [PATCH 23/32] dmaengine: ste_dma40: Allow driver to be probe()able when DT is enabled   Linus Walleij
• [PATCH 24/32 v3] dmaengine: ste_dma40: Supply full Device Tree parsing support   Linus Walleij
• [PATCH 25/32] ARM: ux500: Setup the DMA40 driver's DT node using the new DMA API   Linus Walleij
• [PATCH 26/32] ARM: ux500: Supply UART's DMA configuration via Device Tree   Linus Walleij
• [PATCH 27/32] ARM: ux500: Stop registering DMA40 from platform data when DT is enabled   Linus Walleij
• [PATCH 28/32] ARM: ux500: Pass remnant platform data though to DMA40 driver   Linus Walleij
• [PATCH 29/32] ARM: ux500: Stop passing UART's platform data for Device Tree boots   Linus Walleij
• [PATCH 30/32] ARM: ux500: Supply MMC DMA configuration via Device Tree   Linus Walleij
• [PATCH 31/32] ARM: ux500: Stop passing MMC's platform data for Device Tree boots   Linus Walleij
• [PATCH 32/32] ARM: ux500: Move SDI (MMC) and UART devices under more descriptive heading   Linus Walleij
• [PATCH 1/9 v2] crypto: ux500/hash - Prepare clock before enabling it   Linus Walleij
• [PATCH 2/9] crypto: ux500/hash - Set DMA configuration though dma_slave_config()   Linus Walleij
• [PATCH 3/9] ARM: ux500: Stop passing Hash DMA channel config information though pdata   Linus Walleij
• [PATCH 4/9 v2] crypto: ux500/cryp - Prepare clock before enabling it   Linus Walleij
• [PATCH 5/9] crypto: ux500/cryp - Fix compile error   Linus Walleij
• [PATCH 6/9] crypto: ux500/cryp - Set DMA configuration though dma_slave_config()   Linus Walleij
• [PATCH 7/9] ARM: ux500: Stop passing Cryp DMA channel config information though pdata   Linus Walleij
• [PATCH 8/9] crypto: ux500/[cryp|hash] - Show successful start-up in the bootlog   Linus Walleij
• [PATCH 9/9] ARM: ux500: Register Cyrp and Hash platform drivers on Snowball   Linus Walleij
• [PATCH] cpuidle: add maintainer entry   Linus Walleij
• [PATCH 04/32] dmaengine: ste_dma40: Amalgamate DMA source and destination channel numbers   Linus Walleij
• [PATCH 07/32] ARM: ux500: Supply address location names for the DMA40 DMA controller   Linus Walleij
• [PATCH 08/32 v2] dmaengine: ste_dma40: Remove home-brew MAX() macro   Linus Walleij
• [PATCH 09/32] ARM: ux500: Remove unused 'data_width' attributes from SDI DMA configs   Linus Walleij
• [PATCH 13/32] dmaengine: ste_dma40: Calculate number of logical channels from physical ones   Linus Walleij
• [PATCH 30/32] ARM: ux500: Supply MMC DMA configuration via Device Tree   Linus Walleij
• [PATCH 01/10] usb: musb: ux500: move channel number knowledge into the driver   Linus Walleij
• [PATCH 02/10] usb: musb: ux500: move the MUSB HDRC configuration into the driver   Linus Walleij
• [PATCH 03/10] usb: musb: ux500: take the dma_mask from coherent_dma_mask   Linus Walleij
• [PATCH 04/10 v2] usb: musb: ux500: harden checks for platform data   Linus Walleij
• [PATCH 05/10 v2] usb: musb: ux500: attempt to find channels by name before using pdata   Linus Walleij
• [PATCH 06/10 v2] usb: musb: ux500: add device tree probing support   Linus Walleij
• [PATCH 07/10] ARM: ux500: Add an auxdata entry for MUSB for clock-name look-up   Linus Walleij
• [PATCH 08/10 v2] ARM: ux500: Populate the ux500-musb Device Tree entry   Linus Walleij
• [PATCH 09/10] ARM: ux500: Remove ux500-musb platform registation when booting with DT   Linus Walleij
• [PATCH 10/10] ARM: ux500: Remove empty function u8500_of_init_devices()   Linus Walleij
• [PATCH 04/32] dmaengine: ste_dma40: Amalgamate DMA source and destination channel numbers   Linus Walleij
• [PATCH 04/32] dmaengine: ste_dma40: Amalgamate DMA source and destination channel numbers   Linus Walleij
• [PATCH 2/2] pinctrl: samsung: Fix link error with CONFIG_PINCTRL_EXYNOS disabled   Linus Walleij
• [PATCH 13/23] regulator: ab3100: refactor probe to use IDs   Linus Walleij
• [PATCH 6/9] crypto: ux500/cryp - Set DMA configuration though dma_slave_config()   Linus Walleij
• gpio-pxa initcall level change and machine init breakage   Linus Walleij
• [PATCH] pinctrl: document the "GPIO mode" pitfall   Linus Walleij
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Linus Walleij
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Linus Walleij
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Linus Walleij
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Linus Walleij
• [PATCH] gpio/omap: ensure gpio context is initialised   Linus Walleij
• [PATCH 20/21] MFD: ab8500: export ab8500_gpadc_sw_hw_convert properly   Linus Walleij
• [PATCH 6/9] crypto: ux500/cryp - Set DMA configuration though dma_slave_config()   Linus Walleij
• [PATCH] cpuidle: add maintainer entry   Linus Walleij
• [PATCH] pinctrl: document the "GPIO mode" pitfall   Linus Walleij
• Adding a void * to pinctrl_pin_desc   Linus Walleij
• [PATCH 6/9] crypto: ux500/cryp - Set DMA configuration though dma_slave_config()   Linus Walleij
• [PATCH] ARM: Adds pin config API to set all configs in one function   Linus Walleij
• [PATCH 01/23] ARM: u300: fix ages old copy/paste bug   Linus Walleij
• [PATCH] ARM: u300: fix ages old copy/paste bug   Linus Walleij
• [PATCH 03/23] ARM: u300: device tree support for the timer   Linus Walleij
• [PATCH 05/23 v2] pinctrl: coh901: add device tree support   Linus Walleij
• [PATCH 06/23 v2] ARM: u300: basic device tree support   Linus Walleij
• [PATCH 09/23 v2] watchdog: coh901327: devicetree support   Linus Walleij
• [PATCH v2] pinctrl: move subsystem mutex to pinctrl_dev struct   Linus Walleij
• [PATCH 03/32 v4] dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s   Linus Walleij
• [PATCH v3] pinctrl: move subsystem mutex to pinctrl_dev struct   Linus Walleij
• [PATCH 1/4] clocksource: nomadik-mtu: fix up clocksource/timer   Linus Walleij
• [PATCH V2 03/12] PM / Domains: Add on-off notifiers   Linus Walleij
• Adding a void * to pinctrl_pin_desc   Linus Walleij
• [PATCH] ARM: Adds pin config API to set all configs in one function   Linus Walleij
• [PATCH] mmc: mmci: Allow MMCI to request channels with information acquired from DT   Linus Walleij
• [PATCH] Revert "OMAP/serial: Fix incorrect Rx FIFO threshold setting, LSR validation on Tx, and Tx FIFO IRQ generation"   Paul Walmsley
• OMAP baseline test results for v3.9-rc5   Paul Walmsley
• [PATCH] Revert "OMAP/serial: Fix incorrect Rx FIFO threshold setting, LSR validation on Tx, and Tx FIFO IRQ generation"   Paul Walmsley
• [PATCH] Revert "OMAP/serial: Fix incorrect Rx FIFO threshold setting, LSR validation on Tx, and Tx FIFO IRQ generation"   Paul Walmsley
• [PATCH] ARM:OMAP2: an issue about curr_pwrst, u8 is never < 0   Paul Walmsley
• [PATCH] ARM: OMAP: dpll: enable bypass clock only when attempting dpll bypass   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: PRCM fixes for 3.10   Paul Walmsley
• [PATCH] Revert "OMAP/serial: Fix incorrect Rx FIFO threshold setting, LSR validation on Tx, and Tx FIFO IRQ generation"   Paul Walmsley
• omap cpufreq driver in multi-platform kernels   Paul Walmsley
• omap cpufreq driver in multi-platform kernels   Paul Walmsley
• [PATCH] Revert "OMAP/serial: Fix incorrect Rx FIFO threshold setting, LSR validation on Tx, and Tx FIFO IRQ generation"   Paul Walmsley
• OMAP baseline test results for v3.9-rc3   Paul Walmsley
• [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10   Paul Walmsley
• [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10   Paul Walmsley
• [PATCH 00/10] ARM: OMAP5: hwmod, clock and prm data files   Paul Walmsley
• [PATCH] OMAP/serial: Revert bad fix of Rx FIFO threshold granularity   Paul Walmsley
• [PATCH] Revert "OMAP/serial: Fix incorrect Rx FIFO threshold setting, LSR validation on Tx, and Tx FIFO IRQ generation"   Paul Walmsley
• [PATCH] Revert "OMAP/serial: Fix incorrect Rx FIFO threshold setting, LSR validation on Tx, and Tx FIFO IRQ generation"   Paul Walmsley
• [PATCH] Revert "OMAP/serial: Fix incorrect Rx FIFO threshold setting, LSR validation on Tx, and Tx FIFO IRQ generation"   Paul Walmsley
• [PATCH] ARM: OMAP4: PM: fix PM regression introduced by recent clock cleanup   Paul Walmsley
• [PATCH] ARM: OMAP4: PM: fix PM regression introduced by recent clock cleanup   Paul Walmsley
• [PATCH] ARM: OMAP4: HWMOD: make 'ocp2scp_usb_phy_phy_48m" as the main clock   Paul Walmsley
• [PATCH v2] ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock   Paul Walmsley
• [PATCH v2] ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock (fwd)   Paul Walmsley
• OMAP baseline test results for v3.9-rc6   Paul Walmsley
• [PATCH] ARM: OMAP4: PM: fix PM regression introduced by recent clock cleanup   Paul Walmsley
• OMAP baseline test results for v3.9-rc7   Paul Walmsley
• linux-next ARM multi-platform randconfig errors   Paul Walmsley
• [PATCH 2/8] ARM: OMAP2+: hwmod: Cleanup sidle/mstandby programming   Paul Walmsley
• [PATCH V3 2/3] ARM: net: bpf_jit: make code generation less dependent on struct sk_filter.   Xi Wang
• [PATCH 1/2] ARM: tegra: move <mach/powergate.h> to <linux/tegra-powergate.h>   Stephen Warren
• [PATCHv3 1/6] of: Add support for reading a u32 from a multi-value property.   Stephen Warren
• [PATCHv3 3/6] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Stephen Warren
• [PATCHv3 3/6] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Stephen Warren
• How to represent negative values for device tree property   Stephen Warren
• [PATCH v4 1/6] drivers: phy: add generic PHY framework   Stephen Warren
• [PATCH] bcm2835: Add Broadcom BCM2835 RNG to the device tree   Stephen Warren
• How to represent negative values for device tree property   Stephen Warren
• [PATCH v4 1/6] drivers: phy: add generic PHY framework   Stephen Warren
• [PATCH 1/2] ARM: tegra: move <mach/powergate.h> to <linux/tegra-powergate.h>   Stephen Warren
• [PATCH V3 1/3] ARM: tegra: get PMC clock source from DT   Stephen Warren
• [PATCH V3 2/3] ARM: dts: tegra: add clock source for PMC   Stephen Warren
• [PATCH V3 3/3] ARM: tegra: moving the CPU power timer function to PMC driver   Stephen Warren
• [PATCH V5 0/9] ARM: tegra: add platform suspend support   Stephen Warren
• [PATCH V3] ARM: tegra: cpuidle: remove redundant parameters for powered-down mode   Stephen Warren
• [PATCH V3 3/3] ARM: tegra: moving the CPU power timer function to PMC driver   Stephen Warren
• [PATCH V5 7/9] ARM: dts: tegra: add non-removable and keep-power-in-suspend property for MMC   Stephen Warren
• [PATCH V5 9/9] ARM: dts: tegra: add the PM configurations of PMC   Stephen Warren
• [PATCHv4 RESEND 0/6] arm: vt8500: Add support for pinctrl/gpio module   Stephen Warren
• [PATCH] video: implement a dumb framebuffer driver   Stephen Warren
• [PATCH 1/2] ARM: bcm2835: add dumb framebuffer to device tree   Stephen Warren
• [PATCH 2/2] ARM: bcm235: defconfig updates for dumb framebuffer   Stephen Warren
• [PATCH] bcm2835: Add Broadcom BCM2835 RNG to the device tree   Stephen Warren
• Query on pinctrl usage for DT nodes   Stephen Warren
• [PATCH 5/9] ARM: tegra2: cpuidle: change driver initialization   Stephen Warren
• [PATCH V5 1/9] gpio: tegra: add gpio wakeup source handling   Stephen Warren
• [PATCH v9 00/14] Tegra114 clockframework   Stephen Warren
• [PATCH v9 10/14] ARM: tegra: Define Tegra114 CAR binding   Stephen Warren
• [PATCH v9 12/14] clk: tegra: devicetree match for nvidia, tegra114-car   Stephen Warren
• [PATCH] clocksource: tegra: enable arch_timer   Stephen Warren
• [PATCH v9 00/14] Tegra114 clockframework   Stephen Warren
• [PATCH V4 1/2] ARM: dt: tegra: add clock source of PMC   Stephen Warren
• [PATCH V6 0/9] ARM: tegra: add platform suspend support   Stephen Warren
• [PATCH V3] ARM: tegra: cpuidle: remove redundant parameters for powered-down mode   Stephen Warren
• [PATCH V5 1/9] gpio: tegra: add gpio wakeup source handling   Stephen Warren
• [PATCHv5 0/7] arm: vt8500: Add support for pinctrl/gpio module   Stephen Warren
• [PATCHv5 4/7] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Stephen Warren
• [PATCH] clocksource: tegra: enable arch_timer   Stephen Warren
• [PATCH v9 00/14] Tegra114 clockframework   Stephen Warren
• [PATCH V2 1/7] kbuild: create an "include chroot" for DT bindings   Stephen Warren
• [PATCH V2 2/7] kbuild: fixdep: support concatenated dep files   Stephen Warren
• [PATCH V2 3/7] kbuild: cmd_dtc_cpp: extract deps from both gcc -E and dtc   Stephen Warren
• [PATCH V2 4/7] kbuild: always run gcc -E on *.dts, remove cmd_dtc_cpp   Stephen Warren
• [PATCH V2 5/7] ARM: dt: add header to define GPIO flags   Stephen Warren
• [PATCH V2 6/7] ARM: dt: add header to define IRQ flags   Stephen Warren
• [PATCH V2 7/7] ARM: dt: create a DT header for the GIC   Stephen Warren
• [PATCH v5 0/6] Generic PHY Framework   Stephen Warren
• [PATCH v5 1/6] drivers: phy: add generic PHY framework   Stephen Warren
• [PATCH] video: implement a dumb framebuffer driver   Stephen Warren
• [PATCH V2] video: implement a simple framebuffer driver   Stephen Warren
• [PATCH V2 1/2] ARM: bcm2835: add simple framebuffer to device tree   Stephen Warren
• [PATCH V2 2/2] ARM: bcm2835: defconfig updates for simple framebuffer   Stephen Warren
• [PATCHv5 0/7] arm: vt8500: Add support for pinctrl/gpio module   Stephen Warren
• [PATCH V2 4/7] kbuild: always run gcc -E on *.dts, remove cmd_dtc_cpp   Stephen Warren
• [PATCH] clk: tegra: Fix cdev1 and cdev2 IDs   Stephen Warren
• [PATCH] clk: tegra: Add missing cdev1 and cdev2 clocks   Stephen Warren
• [PATCH] clk: tegra: Use common of_clk_init() function   Stephen Warren
• [PATCH v2] pinctrl/pinconfig: add debug interface   Stephen Warren
• [PATCH v3 07/12] PCI: tegra: Move PCIe driver to drivers/pci/host   Stephen Warren
• [PATCH v3 07/12] PCI: tegra: Move PCIe driver to drivers/pci/host   Stephen Warren
• [PATCH V2] clk: tegra: defer application of init table   Stephen Warren
• [PATCH] clk: tegra: Fix cdev1 and cdev2 IDs   Stephen Warren
• [PATCH] clk: tegra: Fix cdev1 and cdev2 IDs   Stephen Warren
• [PATCH] clk: tegra: Fix cdev1 and cdev2 IDs   Stephen Warren
• [PATCH v9 00/14] Tegra114 clockframework   Stephen Warren
• [PATCH] clk: tegra: fix enum tegra114_clk to match binding   Stephen Warren
• [PATCH V2] clk: tegra: defer application of init table   Stephen Warren
• [PATCH V2 1/7] kbuild: create an "include chroot" for DT bindings   Stephen Warren
• [GIT PULL 1/3] ARM: bcm2835: device tree updates   Stephen Warren
• [GIT PULL 2/3] ARM: bcm2835: convert to multi-platform   Stephen Warren
• [GIT PULL 3/3] ARM: bcm2835: defconfig updates   Stephen Warren
• [PATCH -next] ARM: tegra: pm: remove duplicated include from pm.c   Stephen Warren
• [GIT PULL 1/8] ARM: tegra: DT-related fixes needed by the MMC tree   Stephen Warren
• [GIT PULL 2/8] ARM: tegra: minor fixes   Stephen Warren
• [GIT PULL 3/8] ARM: tegra: cleanup   Stephen Warren
• [GIT PULL 4/8] ARM: tegra: core SoC support development   Stephen Warren
• [GIT PULL 5/8] ARM: tegra: clock driver development   Stephen Warren
• [GIT PULL 6/8] ARM: tegra: device tree changes   Stephen Warren
• [GIT PULL 7/8] ARM: tegra: multi-platform conversion   Stephen Warren
• [GIT PULL 8/8] ARM: tegra: defconfig changes   Stephen Warren
• [GIT PULL] dt: run C pre-processor on *.dts, create some standard headers   Stephen Warren
• My vacation schedule Apr 17-May 1   Stephen Warren
• GENERIC_GPIO considered deprecated   Stephen Warren
• Query on pinctrl usage for DT nodes   Stephen Warren
• [PATCH 1/3] ARM: tegra: pcie: Add tegra3 support   Stephen Warren
• [PATCH 1/3] ARM: tegra: pcie: Add tegra3 support   Stephen Warren
• [PATCH 2/3] ARM: dts: tegra: Correct PCIe entry   Stephen Warren
• [PATCH 3/3] ARM: dts: tegra: Add PCIe entry for cardhu   Stephen Warren
• [PATCH 1/1] of/irq: store IRQ trigger/level in struct resource flags   Stephen Warren
• [PATCH V2] video: implement a simple framebuffer driver   Stephen Warren
• [GIT PULL 3/8] ARM: tegra: cleanup   Stephen Warren
• [GIT PULL 5/8] ARM: tegra: clock driver development   Stephen Warren
• [PATCH 2/3] ARM: dts: tegra: Correct PCIe entry   Stephen Warren
• [GIT PULL 7/8] ARM: tegra: multi-platform conversion   Stephen Warren
• Kexec couldn't reboot capture kernel on pandaboard ES with OMAP4460   Stephen Warren
• [PATCH 1/3] ARM: tegra: pcie: Add tegra3 support   Stephen Warren
• [PATCH 10/18] ARM: tegra1: cpuidle: use init/exit common routine   Stephen Warren
• Query on pinctrl usage for DT nodes   Stephen Warren
• [PATCH 1/2] ARM: boot/dts/Makefile: drop '\'   Stephen Warren
• [PATCH 2/2] ARM: at91: move dts to subdir   Stephen Warren
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Stephen Warren
• [PATCH 1/2] ARM: config: tegra: enable T114 SPI   Stephen Warren
• [PATCH] ARM: tegra: Add charger subnode to tps65090 node   Stephen Warren
• [PATCH v3 07/12] PCI: tegra: Move PCIe driver to drivers/pci/host   Stephen Warren
• [PATCH v3 07/12] PCI: tegra: Move PCIe driver to drivers/pci/host   Stephen Warren
• [PATCH v6 3/8] reset: Add driver for gpio-controlled reset pins   Stephen Warren
• [PATCH V2] video: implement a simple framebuffer driver   Stephen Warren
• [PATCH V2] video: implement a simple framebuffer driver   Stephen Warren
• [PATCH] ARM: tegra: Add charger subnode to tps65090 node   Stephen Warren
• Kexec couldn't reboot capture kernel on pandaboard ES with OMAP4460   Stephen Warren
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Stephen Warren
• [PATCH V2] video: implement a simple framebuffer driver   Stephen Warren
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Stephen Warren
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Stephen Warren
• Kexec couldn't reboot capture kernel on pandaboard ES with OMAP4460   Stephen Warren
• [PATCH 1/3] ARM: tegra: pcie: Add tegra3 support   Stephen Warren
• [PATCH 2/2] ARM: remove all trivial init_machine callbacks   Stephen Warren
• [PATCH 1/3] ARM: tegra: pcie: Add tegra3 support   Stephen Warren
• [PATCH 1/3] ARM: tegra: pcie: Add tegra3 support   Stephen Warren
• [PATCH V4 1/6] clk: OMAP: introduce device tree binding to kernel clock data   Stephen Warren
• [PATCH] ARM: ux500: DT: Rename root node "soc-u9500" into "soc-ux500"   Stephen Warren
• Query on pinctrl usage for DT nodes   Stephen Warren
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Stephen Warren
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Stephen Warren
• [PATCH v3 07/12] PCI: tegra: Move PCIe driver to drivers/pci/host   Stephen Warren
• [RFC PATCH 2/2] ARM: DT: kernel: DT cpu node bindings update   Stephen Warren
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Stephen Warren
• [PATCH 1/3] ARM: tegra: fix build error when THUMB2_KERNEL enabled   Stephen Warren
• [PATCH 2/3] ARM: tegra: fix relocation truncated error when THUMB2_KERNEL enabled   Stephen Warren
• [PATCH 3/3] ARM: tegra: make sure the pointer on 4 byte align when THUMB2_KERNEL enabled   Stephen Warren
• [PATCH 1/3] ARM: tegra: fix build error when THUMB2_KERNEL enabled   Stephen Warren
• [PATCH] ARM: tegra: pm: fix build error w/o PM_SLEEP   Stephen Warren
• [PATCH] ARM: tegra: pm: fix build error w/o PM_SLEEP   Stephen Warren
• [RFC PATCH 2/2] ARM: DT: kernel: DT cpu node bindings update   Stephen Warren
• [PATCH 3/3] ARM: tegra: make sure the pointer on 4 byte align when THUMB2_KERNEL enabled   Stephen Warren
• [PATCH] ARM: tegra: solve adr range issue with THUMB2_KERNEL enabled   Stephen Warren
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Stephen Warren
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Stephen Warren
• [RFC PATCH 2/2] ARM: DT: kernel: DT cpu node bindings update   Stephen Warren
• [PATCH v2] pinctrl/pinconfig: add debug interface   Stephen Warren
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Stephen Warren
• [PATCH 3/3] ARM: tegra: make sure the pointer on 4 byte align when THUMB2_KERNEL enabled   Stephen Warren
• [RFC PATCH 2/2] ARM: DT: kernel: DT cpu node bindings update   Stephen Warren
• Fwd: Tegra 30 System hangs because of commit "pinctrl: move subsystem mutex to pinctrl_dev struct"   Stephen Warren
• [PATCH 1/3] cputime_nsecs: use math64.h for nsec resolution conversion helpers   Frederic Weisbecker
• [PATCH 1/3] cputime_nsecs: use math64.h for nsec resolution conversion helpers   Frederic Weisbecker
• [PATCH v5 0/7] xen/arm: move to mach-virt and support SMP   Konrad Rzeszutek Wilk
• [PATCH v3] mm: Make snapshotting pages for stable writes a per-bio operation   Darrick J. Wong
• [PATCH v3] mm: Make snapshotting pages for stable writes a per-bio operation   Darrick J. Wong
• [PATCH v3] [RESEND] mm: Make snapshotting pages for stable writes a per-bio operation   Darrick J. Wong
• Fwd: Tegra 30 System hangs because of commit "pinctrl: move subsystem mutex to pinctrl_dev struct"   Bryan Wu
• [PATCH 0/4] mtd: atmel_nand: enable Nand Flash Controller (NFC) support   Josh Wu
• [PATCH 1/4] mtd: atmel_nand: replace pmecc enable code with one function.   Josh Wu
• [PATCH 2/4] mtd: atmel_nand: add Nand Flash Controller (NFC) support   Josh Wu
• [PATCH 3/4] mtd: atmel_nand: enable Nand Flash Controller (NFC) read data via sram   Josh Wu
• [PATCH 4/4] mtd: atmel_nand: enable Nand Flash Controller (NFC) write via sram   Josh Wu
• [PATCH 1/9] ARM: cpuidle: remove useless declaration   Rafael J. Wysocki
• [PATCH 1/9] ARM: cpuidle: remove useless declaration   Rafael J. Wysocki
• [PATCH 7/9] intel: cpuidle: remove stop/start critical timings   Rafael J. Wysocki
• [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq   Rafael J. Wysocki
• [PATCH V5 0/4] cpufreq: exynos5440: support for cpufreq driver   Rafael J. Wysocki
• [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq   Rafael J. Wysocki
• [PATCH 7/9] intel: cpuidle: remove stop/start critical timings   Rafael J. Wysocki
• [PATCH V5 0/4] cpufreq: exynos5440: support for cpufreq driver   Rafael J. Wysocki
• [PATCH 1/9] ARM: cpuidle: remove useless declaration   Rafael J. Wysocki
• [GIT PULL] CPUidle: OMAP cleanups for v3.10   Rafael J. Wysocki
• [PATCH] cpufreq: OMAP: instantiate omap-cpufreq as a platform_driver   Rafael J. Wysocki
• [RESEND PATCH] PM / Runtime: Idle devices asynchronously after probe|release   Rafael J. Wysocki
• [PATCH 00/18] cpuidle: code consolidation   Rafael J. Wysocki
• [PATCH] cpufreq: dbx500: Round to closest available freq   Rafael J. Wysocki
• [RESEND PATCH V6 1/4] cpufreq: exynos: Add cpufreq driver for exynos5440   Rafael J. Wysocki
• [PATCH] PM / Runtime: Improve prepare handling at system suspend for genpd   Rafael J. Wysocki
• [PATCH] cpufreq: exynos5440: Protect opp search calls with rcu lock   Rafael J. Wysocki
• [V4 patch 00/15] cpuidle: code consolidation   Rafael J. Wysocki
• [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq   Rafael J. Wysocki
• [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq   Rafael J. Wysocki
• [PATCH 14/21] cpufreq: pxa2xx: initialize variables   Rafael J. Wysocki
• [PATCH] cpuidle: add maintainer entry   Rafael J. Wysocki
• [PATCH 1/2] ARM: s3c64xx: cpuidle: use init/exit common routine   Rafael J. Wysocki
• [V2 PATCH] cpuidle: add maintainer entry   Rafael J. Wysocki
• [V9 PATCH 00/12] mv-usb phy driver   Chao Xie
• [V9 PATCH 01/12] usb: phy: protect phy init and shutdown for mutiple deivces   Chao Xie
• [V9 PATCH 02/12] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller   Chao Xie
• [V9 PATCH 03/12] usb: gadget: mv_udc: use PHY driver for udc   Chao Xie
• [V9 PATCH 04/12] usb: ehci: ehci-mv: use PHY driver for ehci   Chao Xie
• [V9 PATCH 05/12] usb: phy: phy-mv-usb: use USB2 PHY driver for otg   Chao Xie
• [V9 PATCH 06/12] usb: mv_u3d: usb phy drivers for phy operation   Chao Xie
• [V9 PATCH 07/12] arm: mmp2: change the defintion of usb devices   Chao Xie
• [V9 PATCH 08/12] arm: pxa910: change the defintion of usb devices   Chao Xie
• [V9 PATCH 09/12] arm: ttc_dkb: modify usb support   Chao Xie
• [V9 PATCH 10/12] arm: mmp: remove unused usb devices   Chao Xie
• [V9 PATCH 11/12] arm: brownstone: add usb support for the board   Chao Xie
• [V9 PATCH 12/12] usb: mv_usb: remove the phy callbacks in pdata   Chao Xie
• [PATCH] ARM: cache-l2x0: add device tree support for power control   Chao Xie
• [V9 PATCH 00/12] mv-usb phy driver   Chao Xie
• [V9 PATCH 00/12] mv-usb phy driver   Chao Xie
• [V9 PATCH 01/12] usb: phy: protect phy init and shutdown for mutiple deivces   Chao Xie
• [V9 PATCH 02/12] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller   Chao Xie
• [V9 PATCH 03/12] usb: gadget: mv_udc: use PHY driver for udc   Chao Xie
• [V9 PATCH 04/12] usb: ehci: ehci-mv: use PHY driver for ehci   Chao Xie
• [V9 PATCH 05/12] usb: phy: phy-mv-usb: use USB2 PHY driver for otg   Chao Xie
• [V9 PATCH 06/12] usb: mv_u3d: usb phy drivers for phy operation   Chao Xie
• [V9 PATCH 07/12] arm: mmp2: change the defintion of usb devices   Chao Xie
• [V9 PATCH 08/12] arm: pxa910: change the defintion of usb devices   Chao Xie
• [V9 PATCH 09/12] arm: ttc_dkb: modify usb support   Chao Xie
• [V9 PATCH 10/12] arm: mmp: remove unused usb devices   Chao Xie
• [V9 PATCH 11/12] arm: brownstone: add usb support for the board   Chao Xie
• [V9 PATCH 12/12] usb: mv_usb: remove the phy callbacks in pdata   Chao Xie
• [PATCH] crypto: ux500: add missing comma   Herbert Xu
• [PATCH V2 6/6] usb: mv_usb: remove clock name from pdata   Yu Xu
• [PATCH v7 08/14] spi/spi-atmel: fix spi-atmel driver to adapt to slave_config changes   Yang, Wenyou
• [PATCH v7 10/14] spi/spi-atmel: correct 16 bits transfers with DMA   Yang, Wenyou
• [PATCH v7 03/14] spi/spi-atmel: add physical base address   Yang, Wenyou
• [PATCH v7 03/14] spi/spi-atmel: add physical base address   Yang, Wenyou
• [PATCH v7 06/14] spi/spi-atmel: add flag to controller data for lock operations   Yang, Wenyou
• [PATCH v8 0/8] spi/spi-atmel: add dmaengine support for atmel spi controller and to test the device tree support   Wenyou Yang
• [PATCH v8 1/8] spi/spi-atmel: add physical base address   Wenyou Yang
• [PATCH v8 2/8] spi/spi-atmel: add flag to controller data for lock operations   Wenyou Yang
• [PATCH v8 3/8] spi/spi-atmel: add dmaengine support   Wenyou Yang
• [PATCH v8 4/8] spi/spi-atmel: BUG: fix doesn' support 16 bits transfers using PIO   Wenyou Yang
• [PATCH v8 5/8] ARM: at91: add clocks for spi dt entries   Wenyou Yang
• [PATCH v8 6/8] ARM: dts: add spi nodes for atmel SoC   Wenyou Yang
• [PATCH v8 7/8] ARM: dts: add spi nodes for the atmel boards   Wenyou Yang
• [PATCH v8 8/8] ARM: dts: add pinctrl property for spi node for atmel SoC   Wenyou Yang
• linux-next: manual merge of the arm-soc tree with the spi-mb tree   Yang, Wenyou
• [PATCH v2] ARM: Fix l2x0_init log message   Sherman Yin
• [PATCH] ARM: Adds pin config API to set all configs in one function   Sherman Yin
• Adding a void * to pinctrl_pin_desc   Sherman Yin
• [PATCH] ARM: Adds pin config API to set all configs in one function   Sherman Yin
• Adding a void * to pinctrl_pin_desc   Sherman Yin
• Adding a void * to pinctrl_pin_desc   Sherman Yin
• [PATCH -next] ARM: tegra: pm: remove duplicated include from pm.c   Wei Yongjun
• [PATCH -next] [media] s5p-mfc: fix error return code in s5p_mfc_probe()   Wei Yongjun
• [PATCH -next] ARM: vexpress: remove duplicated include from v2m.c   Wei Yongjun
• [PATCH] ARM: OMAP1: DMA: fix error handling in omap1_system_dma_init()   Wei Yongjun
• [PATCH -next] xen/arm: remove duplicated include from enlighten.c   Wei Yongjun
• [PATCH 1/3] video: Make IPU KMS parse display-timings   Philipp Zabel
• [PATCH 2/3] ARM: dts: mx53qsb: Add support for parallel display   Philipp Zabel
• [PATCH 1/3] ARM: dts: imx28-evk: Use the standard gpio reset binding   Philipp Zabel
• [PATCH 0/5] i.MX53 TVE clock patches   Philipp Zabel
• [PATCH 1/5] ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree   Philipp Zabel
• [PATCH 2/5] ARM i.MX53: Remove unused tve_gate clkdev entry   Philipp Zabel
• [PATCH 3/5] ARM i.MX53: make tve_ext_sel propagate rate change to PLL   Philipp Zabel
• [PATCH 4/5] ARM i.MX53: tve_di clock is not part of the CCM, but of TVE   Philipp Zabel
• [PATCH 5/5] ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock   Philipp Zabel
• [PATCH 0/7] i.MX53 IPU + TVE patches   Philipp Zabel
• [PATCH 1/7] staging: drm/imx: ipu-dc: add 24-bit GBR support to DC   Philipp Zabel
• [PATCH 2/7] staging: drm/imx: ipuv3-crtc: use external clock for TV Encoder   Philipp Zabel
• [PATCH 3/7] staging: drm/imx: ipu-di: add comments explaining signal generator configuration   Philipp Zabel
• [PATCH 4/7] staging: drm/imx: Add support for VGA via TVE on i.MX53   Philipp Zabel
• [PATCH 5/7] staging: drm/imx: ipu-dc: add WCLK/WRG opcodes   Philipp Zabel
• [PATCH 6/7] staging: drm/imx: ipu-dc: force black output during blanking   Philipp Zabel
• [PATCH 7/7] staging: drm/imx: Add support for Television Encoder (TVEv2)   Philipp Zabel
• [PATCH 0/2] Add TVE to i.MX53-QSB device tree   Philipp Zabel
• [PATCH 1/2] ARM i.MX53: Add TVE entry to i.MX53 dtsi   Philipp Zabel
• [PATCH 2/2] ARM i.MX53: dts: Add TVE to i.MX53-QSB device tree   Philipp Zabel
• [PATCH 0/5] i.MX53 TVE clock patches   Philipp Zabel
• [PATCH 0/7] i.MX53 IPU + TVE patches   Philipp Zabel
• [PATCH v6 1/8] dt: describe base reset signal binding   Philipp Zabel
• [GIT PULL v2] Reset controller API   Philipp Zabel
• [PATCH v2 1/4] imx-drm: parallel-display: Fix valid_mode checking   Philipp Zabel
• [PATCH v2 2/4] imx-drm: parallel-display: Make IPU KMS parse display-timings   Philipp Zabel
• [PATCH v2 3/4] ARM: dts: mx53qsb: Add support for parallel display   Philipp Zabel
• [PATCH v2 2/4] imx-drm: parallel-display: Make IPU KMS parse display-timings   Philipp Zabel
• [PATCH] ARM i.MX53: dts: add i2c aliases   Philipp Zabel
• [PATCH] ARM i.MX6q: Fix periph_clk2_sel and periph2_clk2_sel clocks   Philipp Zabel
• [GIT PULL v2] Reset controller API   Philipp Zabel
• [PATCH v6 3/8] reset: Add driver for gpio-controlled reset pins   Philipp Zabel
• [GIT PULL v2] Reset controller API   Philipp Zabel
• [GIT PULL v3] Reset controller API   Philipp Zabel
• [PATCH] ARM i.MX6q: Fix periph_clk2_sel and periph2_clk2_sel clocks   Philipp Zabel
• [PATCH v2 3/4] ARM: dts: mx53qsb: Add support for parallel display   Philipp Zabel
• [PATCH v2] ARM i.MX6q: Fix periph_clk2_sel and periph2_clk2_sel clocks   Philipp Zabel
• [PATCH] ARM i.MX6q: Fix periph_clk2_sel and periph2_clk2_sel clocks   Philipp Zabel
• [RFC][PATCH] video: imx: Select VIDEOMODE_HELPERS   Philipp Zabel
• [RFC][PATCH] video: imx: Select VIDEOMODE_HELPERS   Philipp Zabel
• [PATCH] ARM: cache-l2x0: add device tree support for power control   Neil Zhang
• [PATCH 0/4] bring up pxa988 with DT   Neil Zhang
• [PATCH 1/4] ARM: mmp: add wakeup function for ICU   Neil Zhang
• [PATCH 2/4] ARM: mmp: move function declaration to head file   Neil Zhang
• [PATCH 3/4] ARM: mmp: bring up pxa988 with device tree support   Neil Zhang
• [PATCH 4/4] ARM: mmp: add SMP support for pxa988   Neil Zhang
• [PATCH 2/4] ARM: mmp: move function declaration to head file   Neil Zhang
• [PATCH 1/4] ARM: mmp: add wakeup function for ICU   Neil Zhang
• [PATCH 3/4] ARM: mmp: bring up pxa988 with device tree support   Neil Zhang
• [PATCH 4/4] ARM: mmp: add SMP support for pxa988   Neil Zhang
• [PATCH 1/4] ARM: mmp: add wakeup function for ICU   Neil Zhang
• [PATCH 1/3] ARM: pxa: remove cpu_is_xxx in gpio driver   Haojian Zhuang
• [PATCH 2/3] ARM: pxa: move PXA_GPIO_TO_IRQ macro   Haojian Zhuang
• [PATCH 3/3] ARM: mmp: add more compatible names in gpio driver   Haojian Zhuang
• [PATCH] ARM: pxa: select PXA935 on saar & tavorevb   Haojian Zhuang
• [PATCH] ARM: pxa: move debug uart code   Haojian Zhuang
• [PATCH] ARM: pxa: move debug uart code   Haojian Zhuang
• [PATCH 1/3] ARM: pxa: remove cpu_is_xxx in gpio driver   Haojian Zhuang
• [GIT PULL][for 3.10] pull request from armsoc/pxa branch in pxa git tree   Haojian Zhuang
• [GIT PULL] Timer clean-ups for 3.10, Part 2   Haojian Zhuang
• [GIT PULL] [for 3.10] pull request from armsoc/dt branch in pxa git tree   Haojian Zhuang
• [PATCH 1/4] ARM: mmp: add wakeup function for ICU   Haojian Zhuang
• [PATCH 2/4] ARM: mmp: move function declaration to head file   Haojian Zhuang
• [PATCH 3/4] ARM: mmp: bring up pxa988 with device tree support   Haojian Zhuang
• [PATCH 4/4] ARM: mmp: add SMP support for pxa988   Haojian Zhuang
• [GIT PULL] [for 3.10] pull request from armsoc/dt branch in pxa git tree   Haojian Zhuang
• [PATCH 1/4] ARM: mmp: add wakeup function for ICU   Haojian Zhuang
• [PATCH 1/5] ARM: debug: support debug ll on hisilicon soc   Haojian Zhuang
• [PATCH 2/5] clk: hi3xxx: add clock support   Haojian Zhuang
• [PATCH 3/5] ARM: hi3xxx: add board support with device tree   Haojian Zhuang
• [PATCH 4/5] ARM: hi3xxx: enable hi4511 with device tree   Haojian Zhuang
• [PATCH 5/5] ARM: config: append arch hi3xxx into multi defconfig   Haojian Zhuang
• [PATCH 4/4] ARM: mmp: add SMP support for pxa988   Haojian Zhuang
• gpio-pxa initcall level change and machine init breakage   Haojian Zhuang
• [PATCH 1/3] irqchip: move mmp irq driver   Haojian Zhuang
• [PATCH 2/3] irqchip: mmp: support irqchip   Haojian Zhuang
• [PATCH 3/3] irqchip: mmp: support MULTI_IRQ_HANDLER   Haojian Zhuang
• gpio-pxa initcall level change and machine init breakage   Haojian Zhuang
• Pinmuxing with devicetree (beaglebone)   Haojian Zhuang
• gpio-pxa initcall level change and machine init breakage   Haojian Zhuang
• [v8,01/12] gpio: add gpio offset in gpio range cells property   Haojian Zhuang
• [RFC PATCH v3 3/6] sched: pack small tasks   Peter Zijlstra
• [RFC PATCH v3 3/6] sched: pack small tasks   Peter Zijlstra
• [RFC PATCH v3 5/6] sched: pack the idle load balance   Peter Zijlstra
• [PATCH 03/14] sched: pack small tasks   Peter Zijlstra
• [PATCH 03/14] sched: pack small tasks   Peter Zijlstra
• [PATCH 04/14] sched: pack the idle load balance   Peter Zijlstra
• [PATCH 07/14] sched: agressively pack at wake/fork/exec   Peter Zijlstra
• [PATCH 08/14] sched: trig ILB on an idle buddy   Peter Zijlstra
• [PATCH 0/7] ARM: KVM: Revamping the HYP init code for fun and profit   Marc Zyngier
• [PATCH 1/7] ARM: KVM: simplify HYP mapping population   Marc Zyngier
• [PATCH 2/7] ARM: KVM: fix HYP mapping limitations around zero   Marc Zyngier
• [PATCH 3/7] ARM: KVM: move to a KVM provided HYP idmap   Marc Zyngier
• [PATCH 4/7] ARM: KVM: enforce page alignment for identity mapped code   Marc Zyngier
• [PATCH 5/7] ARM: KVM: parametrize HYP page table freeing   Marc Zyngier
• [PATCH 6/7] ARM: KVM: switch to a dual-step HYP init code   Marc Zyngier
• [PATCH 7/7] ARM: KVM: perform HYP initilization for hotplugged CPUs   Marc Zyngier
• [PATCH v2] ARM: KVM: promote vfp_host pointer to generic host cpu context   Marc Zyngier
• [PATCH] ARM: KVM: fix KVM_CAP_ARM_SET_DEVICE_ADDR reporting   Marc Zyngier
• [PATCH 3/7] ARM: KVM: move to a KVM provided HYP idmap   Marc Zyngier
• [PATCH 4/7] ARM: KVM: enforce page alignment for identity mapped code   Marc Zyngier
• [PATCH 6/7] ARM: KVM: switch to a dual-step HYP init code   Marc Zyngier
• [PATCH 4/7] ARM: KVM: enforce page alignment for identity mapped code   Marc Zyngier
• Device Passthrough latest ARMv7 tree   Marc Zyngier
• [PATCH 6/7] ARM: KVM: switch to a dual-step HYP init code   Marc Zyngier
• [PATCH 1/7] ARM: KVM: simplify HYP mapping population   Marc Zyngier
• [PATCH 2/7] ARM: KVM: fix HYP mapping limitations around zero   Marc Zyngier
• [PATCH 6/7] ARM: KVM: switch to a dual-step HYP init code   Marc Zyngier
• [PATCH 6/7] ARM: KVM: switch to a dual-step HYP init code   Marc Zyngier
• [PATCH] ARM: arch_timer: Silence debug preempt warnings   Marc Zyngier
• [PATCH 6/7] ARM: KVM: switch to a dual-step HYP init code   Marc Zyngier
• [PATCHv2] ARM: arch_timer: Silence debug preempt warnings   Marc Zyngier
• [PATCH v2 0/7] ARM: KVM: Revamping the HYP init code for fun and profit   Marc Zyngier
• [PATCH v2 1/7] ARM: KVM: simplify HYP mapping population   Marc Zyngier
• [PATCH v2 2/7] ARM: KVM: fix HYP mapping limitations around zero   Marc Zyngier
• [PATCH v2 3/7] ARM: KVM: move to a KVM provided HYP idmap   Marc Zyngier
• [PATCH v2 4/7] ARM: KVM: enforce maximum size for identity mapped code   Marc Zyngier
• [PATCH v2 5/7] ARM: KVM: parametrize HYP page table freeing   Marc Zyngier
• [PATCH v2 6/7] ARM: KVM: switch to a dual-step HYP init code   Marc Zyngier
• [PATCH v2 7/7] ARM: KVM: perform HYP initilization for hotplugged CPUs   Marc Zyngier
• [PATCH 0/2] ARM: KVM: pre-KVM/arm64 patches   Marc Zyngier
• [PATCH 1/2] ARM: KVM: add architecture specific hook for capabilities   Marc Zyngier
• [PATCH 2/2] ARM: KVM: promote vfp_host pointer to generic host cpu context   Marc Zyngier
• [PATCH v3 00/32] Port of KVM to arm64   Marc Zyngier
• [PATCH v3 01/32] arm64: add explicit symbols to ESR_EL1 decoding   Marc Zyngier
• [PATCH v3 02/32] arm64: KVM: define HYP and Stage-2 translation page flags   Marc Zyngier
• [PATCH v3 03/32] arm64: KVM: HYP mode idmap support   Marc Zyngier
• [PATCH v3 04/32] arm64: KVM: EL2 register definitions   Marc Zyngier
• [PATCH v3 05/32] arm64: KVM: system register definitions for 64bit guests   Marc Zyngier
• [PATCH v3 06/32] arm64: KVM: Basic ESR_EL2 helpers and vcpu register access   Marc Zyngier
• [PATCH v3 07/32] arm64: KVM: fault injection into a guest   Marc Zyngier
• [PATCH v3 08/32] arm64: KVM: architecture specific MMU backend   Marc Zyngier
• [PATCH v3 09/32] arm64: KVM: user space interface   Marc Zyngier
• [PATCH v3 10/32] arm64: KVM: system register handling   Marc Zyngier
• [PATCH v3 11/32] arm64: KVM: CPU specific system registers handling   Marc Zyngier
• [PATCH v3 12/32] arm64: KVM: virtual CPU reset   Marc Zyngier
• [PATCH v3 13/32] arm64: KVM: kvm_arch and kvm_vcpu_arch definitions   Marc Zyngier
• [PATCH v3 14/32] arm64: KVM: MMIO access backend   Marc Zyngier
• [PATCH v3 15/32] arm64: KVM: guest one-reg interface   Marc Zyngier
• [PATCH v3 16/32] arm64: KVM: hypervisor initialization code   Marc Zyngier
• [PATCH v3 17/32] arm64: KVM: HYP mode world switch implementation   Marc Zyngier
• [PATCH v3 18/32] arm64: KVM: Exit handling   Marc Zyngier
• [PATCH v3 19/32] arm64: KVM: Plug the VGIC   Marc Zyngier
• [PATCH v3 20/32] arm64: KVM: Plug the arch timer   Marc Zyngier
• [PATCH v3 21/32] arm64: KVM: PSCI implementation   Marc Zyngier
• [PATCH v3 22/32] arm64: KVM: Build system integration   Marc Zyngier
• [PATCH v3 23/32] arm64: KVM: define 32bit specific registers   Marc Zyngier
• [PATCH v3 24/32] arm64: KVM: 32bit GP register access   Marc Zyngier
• [PATCH v3 25/32] arm64: KVM: 32bit conditional execution emulation   Marc Zyngier
• [PATCH v3 26/32] arm64: KVM: 32bit handling of coprocessor traps   Marc Zyngier
• [PATCH v3 27/32] arm64: KVM: CPU specific 32bit coprocessor access   Marc Zyngier
• [PATCH v3 28/32] arm64: KVM: 32bit specific register world switch   Marc Zyngier
• [PATCH v3 29/32] arm64: KVM: 32bit guest fault injection   Marc Zyngier
• [PATCH v3 30/32] arm64: KVM: enable initialization of a 32bit vcpu   Marc Zyngier
• [PATCH v3 31/32] arm64: KVM: userspace API documentation   Marc Zyngier
• [PATCH v3 32/32] arm64: KVM: MAINTAINERS update   Marc Zyngier
• [PATCH 1/2] ARM: KVM: add architecture specific hook for capabilities   Marc Zyngier
• [PATCH v2 6/7] ARM: KVM: switch to a dual-step HYP init code   Marc Zyngier
• [PATCH v2 6/7] ARM: KVM: switch to a dual-step HYP init code   Marc Zyngier
• [PATCH] ARM: KVM: fix L_PTE_S2_RDWR to actually be Read/Write   Marc Zyngier
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Marc Zyngier
• [PATCH] ARM: KVM: fix L_PTE_S2_RDWR to actually be Read/Write   Marc Zyngier
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Marc Zyngier
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Marc Zyngier
• [PATCH v3 0/7] ARM: KVM: Revamping the HYP init code for fun and profit   Marc Zyngier
• [PATCH v3 1/7] ARM: KVM: simplify HYP mapping population   Marc Zyngier
• [PATCH v3 2/7] ARM: KVM: fix HYP mapping limitations around zero   Marc Zyngier
• [PATCH v3 3/7] ARM: KVM: move to a KVM provided HYP idmap   Marc Zyngier
• [PATCH v3 4/7] ARM: KVM: enforce maximum size for identity mapped code   Marc Zyngier
• [PATCH v3 5/7] ARM: KVM: rework HYP page table freeing   Marc Zyngier
• [PATCH v3 6/7] ARM: KVM: switch to a dual-step HYP init code   Marc Zyngier
• [PATCH v3 7/7] ARM: KVM: perform HYP initilization for hotplugged CPUs   Marc Zyngier
• [PATCH v3 02/32] arm64: KVM: define HYP and Stage-2 translation page flags   Marc Zyngier
• [PATCH v3 07/32] arm64: KVM: fault injection into a guest   Marc Zyngier
• [PATCH v3 09/32] arm64: KVM: user space interface   Marc Zyngier
• [PATCH v3 10/32] arm64: KVM: system register handling   Marc Zyngier
• [PATCH v3 11/32] arm64: KVM: CPU specific system registers handling   Marc Zyngier
• [PATCH v3 12/32] arm64: KVM: virtual CPU reset   Marc Zyngier
• [Xen-devel] [PATCH] arm64: remove PSR bit macros from uapi   Marc Zyngier
• [PATCH v3 15/32] arm64: KVM: guest one-reg interface   Marc Zyngier
• [PATCH] ARM: KVM: fix unbalanced get_cpu() in access_dcsw   Marc Zyngier
• [PATCH v4 0/7] ARM: KVM: Revamping the HYP init code for fun and profit   Marc Zyngier
• [PATCH v4 1/7] ARM: KVM: simplify HYP mapping population   Marc Zyngier
• [PATCH v4 2/7] ARM: KVM: fix HYP mapping limitations around zero   Marc Zyngier
• [PATCH v4 3/7] ARM: KVM: move to a KVM provided HYP idmap   Marc Zyngier
• [PATCH v4 4/7] ARM: KVM: enforce maximum size for identity mapped code   Marc Zyngier
• [PATCH v4 5/7] ARM: KVM: rework HYP page table freeing   Marc Zyngier
• [PATCH v4 6/7] ARM: KVM: switch to a dual-step HYP init code   Marc Zyngier
• [PATCH v4 7/7] ARM: KVM: perform HYP initilization for hotplugged CPUs   Marc Zyngier
• [PATCH] ARM: KVM: fix unbalanced get_cpu() in access_dcsw   Marc Zyngier
• [PATCH] ARM: KVM: Add missing break;   Marc Zyngier
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Marc Zyngier
• [PATCH v3 5/7] ARM: KVM: rework HYP page table freeing   Marc Zyngier
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Marc Zyngier
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Marc Zyngier
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Marc Zyngier
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Marc Zyngier
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Marc Zyngier
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Marc Zyngier
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Marc Zyngier
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Marc Zyngier
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Marc Zyngier
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Marc Zyngier
• [PATCH v3 5/7] ARM: KVM: rework HYP page table freeing   Marc Zyngier
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Marc Zyngier
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Marc Zyngier
• [RFC] arm64: Early printk support for virtio-mmio console devices.   Marc Zyngier
• [PATCH 6/7] ARM: KVM: switch to a dual-step HYP init code   Marc Zyngier
• [PATCH v3 6/7] ARM: KVM: switch to a dual-step HYP init code   Marc Zyngier
• [PATCH v3 4/7] ARM: KVM: enforce maximum size for identity mapped code   Marc Zyngier
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Marc Zyngier
• [PATCH] ARM: KVM: iterate over all CPUs for CPU compatibility check   Marc Zyngier
• [PATCH] ARM: mm: Get rid of L_PTE_USER ref from PAGE_S2_DEVICE   Marc Zyngier
• [PATCH v3 11/32] arm64: KVM: CPU specific system registers handling   Marc Zyngier
• [PATCH v3 03/32] arm64: KVM: HYP mode idmap support   Marc Zyngier
• [PATCH v3 07/32] arm64: KVM: fault injection into a guest   Marc Zyngier
• [PATCH v3 08/32] arm64: KVM: architecture specific MMU backend   Marc Zyngier
• [PATCH v3 15/32] arm64: KVM: guest one-reg interface   Marc Zyngier
• [PATCH v3 17/32] arm64: KVM: HYP mode world switch implementation   Marc Zyngier
• [PATCH v3 19/32] arm64: KVM: Plug the VGIC   Marc Zyngier
• [PATCH v3 20/32] arm64: KVM: Plug the arch timer   Marc Zyngier
• [PATCH v3 24/32] arm64: KVM: 32bit GP register access   Marc Zyngier
• [PATCH v3 25/32] arm64: KVM: 32bit conditional execution emulation   Marc Zyngier
• [PATCH v3 10/32] arm64: KVM: system register handling   Marc Zyngier
• [PATCH v3 26/32] arm64: KVM: 32bit handling of coprocessor traps   Marc Zyngier
• [PATCH v3 29/32] arm64: KVM: 32bit guest fault injection   Marc Zyngier
• [PATCH v3 30/32] arm64: KVM: enable initialization of a 32bit vcpu   Marc Zyngier
• [PATCH v3 31/32] arm64: KVM: userspace API documentation   Marc Zyngier
• [PATCH v3 08/32] arm64: KVM: architecture specific MMU backend   Marc Zyngier
• [PATCH V2] ARM: KVM: Allow host virtual timer irq number to be different from guest virtual timer irq number   Marc Zyngier
• [PATCH v4 1/7] ARM: KVM: simplify HYP mapping population   Marc Zyngier
• [RFC PATCH v3 02/17] Documentation: devicetree: arm: cpus/cpu nodes bindings updates   Marc Zyngier
• [PATCH V3] ARM: KVM: Allow host virtual timer irq number to be different from guest virtual timer irq number   Marc Zyngier
• [PATCH] arm64: KVM: Add kvm_target_timer_irq() for arch_timer   Marc Zyngier
• [PATCH 0/2] Early printk support for virtio console devices.   Marc Zyngier
• [PATCH v4 5/7] ARM: KVM: rework HYP page table freeing   Marc Zyngier
• [PATCH v3 02/32] arm64: KVM: define HYP and Stage-2 translation page flags   Marc Zyngier
• [PATCH] ARM: KVM: Allow host virt timer irq to be different from guest timer virt irq   Marc Zyngier
• [PATCH] ARM: KVM: Allow host virt timer irq to be different from guest timer virt irq   Marc Zyngier
• [PATCH v3 08/32] arm64: KVM: architecture specific MMU backend   Marc Zyngier
• [PATCH 0/4] ARM: KVM: random mmu related fixes for 3.10   Marc Zyngier
• [PATCH 1/4] ARM: KVM: be more thorough when invalidating TLBs   Marc Zyngier
• [PATCH 2/4] ARM: KVM: remove dead prototype for __kvm_tlb_flush_vmid   Marc Zyngier
• [PATCH 3/4] ARM: KVM: relax cache maintainance when building page pables   Marc Zyngier
• [PATCH 4/4] ARM: KVM: fix use of S2_PGD_SIZE   Marc Zyngier
• [PATCH 4/4] ARM: KVM: fix use of S2_PGD_SIZE   Marc Zyngier
• [PATCH 4/4] ARM: KVM: fix use of S2_PGD_SIZE   Marc Zyngier
• [PATCH 1/4] ARM: KVM: be more thorough when invalidating TLBs   Marc Zyngier
• [PATCHv3 1/3] ARM: socfpga: Enable soft reset   dinguyen at altera.com
• [PATCHv3 2/3] ARM: socfpga: Add clock entries into device tree   dinguyen at altera.com
• [PATCHv3 3/3] ARM: socfpga: Upgrade clk driver for socfpga to make use of dts clock entries   dinguyen at altera.com
• [RFC v2 PATCH] at_hdmac: move to generic DMA binding   ludovic.desroches at atmel.com
• [PATCH 0/3] ARM: at91: move to generic DMA device tree bindings   ludovic.desroches at atmel.com
• [PATCH 1/3] at_hdmac: move to generic DMA binding   ludovic.desroches at atmel.com
• [PATCH 2/3] i2c: at91: convert to dma_request_slave_channel_compat()   ludovic.desroches at atmel.com
• [PATCH 3/3] mci: at91: convert to dma_request_slave_channel_compat()   ludovic.desroches at atmel.com
• [PATCH v2 0/6] ARM: at91: move to generic DMA device tree binding   ludovic.desroches at atmel.com
• [PATCH 1/6] at_hdmac: move to generic DMA binding   ludovic.desroches at atmel.com
• [PATCH 2/6] ARM: at91: dts: set #dma-cells to the correct value   ludovic.desroches at atmel.com
• [PATCH 3/6] i2c: at91: convert to dma_request_slave_channel_compat()   ludovic.desroches at atmel.com
• [PATCH 4/6] ARM: at91: dts: add i2c dma support   ludovic.desroches at atmel.com
• [PATCH 5/6] mci: at91: convert to dma_request_slave_channel_compat()   ludovic.desroches at atmel.com
• [PATCH 6/6] ARM: at91: dts: add MCI DMA support   ludovic.desroches at atmel.com
• [PATCH v3 0/6] ARM: at91: move to generic DMA device tree binding   ludovic.desroches at atmel.com
• [PATCH v3 1/6] at_hdmac: move to generic DMA binding   ludovic.desroches at atmel.com
• [PATCH v3 2/6] ARM: at91: dts: set #dma-cells to the correct value   ludovic.desroches at atmel.com
• [PATCH v3 3/6] i2c: at91: convert to dma_request_slave_channel_compat()   ludovic.desroches at atmel.com
• [PATCH v3 4/6] ARM: at91: dts: add i2c dma support   ludovic.desroches at atmel.com
• [PATCH v3 5/6] mci: at91: convert to dma_request_slave_channel_compat()   ludovic.desroches at atmel.com
• [PATCH v3 6/6] ARM: at91: dts: add MCI DMA support   ludovic.desroches at atmel.com
• special camera   camera
• [PATCH 15/21] thermal: cooling: avoid uninitialied used gcc warning   edubezval at gmail.com
• [PATCH] mtd: devices: added the 16mb winbond device   girishks2000 at gmail.com
• Removal of NWFPE in its entirety, and VFP emulation code   jonsmirl at gmail.com
• [PATCH RESEND] ARM: EXYNOS: no more support non-DT for EXYNOS SoCs   kgene.kim at gmail.com
• [PATCH] ARM: kprobes: fix test coverage missing failures   kpark3469 at gmail.com
• [PATCH] mm: add an option to disable bounce   vinayakm.list at gmail.com
• [PATCH v2] mm: add an option to disable bounce   vinayakm.list at gmail.com
• [PATCH V5 1/4] cpufreq: exynos: Add cpufreq driver for exynos5440   amit daniel kachhap
• [PATCH V5 0/4] cpufreq: exynos5440: support for cpufreq driver   amit daniel kachhap
• [PATCH V6 1/4] cpufreq: exynos: Add cpufreq driver for exynos5440   amit daniel kachhap
• [RESEND PATCH V6 1/4] cpufreq: exynos: Add cpufreq driver for exynos5440   amit daniel kachhap
• [PATCH] cpufreq: exynos5440: Protect opp search calls with rcu lock   amit daniel kachhap
• [PATCH v2] ARM: davinci: use is IS_ENABLED macro   Prabhakar lad
• [PATCH] ARM: daVinci: remove __init modifier from function declaration   Prabhakar lad
• [PATCH v2 0/3] davinci: vpss: clock cleanup   Prabhakar lad
• [PATCH v2 1/3] media: davinci: vpss: enable vpss clocks   Prabhakar lad
• [PATCH v2 2/3] media: davinci: vpbe: venc: move the enabling of vpss clocks to driver   Prabhakar lad
• [PATCH v2 3/3] davinic: vpss: trivial cleanup   Prabhakar lad
• [PATCH v8 0/2] ARM: davinci: add support for dm365 vpbe display   Prabhakar lad
• [PATCH v8 1/2] ARM: davinci: dm365: add support for v4l2 video display   Prabhakar lad
• [PATCH v8 2/2] ARM: davinci: dm365 EVM: add support for VPBE display   Prabhakar lad
• [PATCH v7 0/2] ARM: davinci: dm355: add support for vpbe display   Prabhakar lad
• [PATCH v7 1/2] ARM: davinci: dm355: add support for v4l2 video display   Prabhakar lad
• [PATCH v7 2/2] ARM: davinci: dm355 EVM: add support for VPBE display   Prabhakar lad
• [PATCH v9 0/2] ARM: davinci: add support for dm365 vpbe display   Prabhakar lad
• [PATCH v9 1/2] ARM: davinci: dm365: add support for v4l2 video display   Prabhakar lad
• [PATCH v9 2/2] ARM: davinci: dm365 EVM: add support for VPBE display   Prabhakar lad
• [PATCH v8 0/2] ARM: davinci: dm355: add support for vpbe display   Prabhakar lad
• [PATCH v8 1/2] ARM: davinci: dm355: add support for v4l2 video display   Prabhakar lad
• [PATCH v8 2/2] ARM: davinci: dm355 EVM: add support for VPBE display   Prabhakar lad
• [PATCH v3 0/3] davinci: vpss: clock cleanup   Prabhakar lad
• [PATCH v3 1/3] media: davinci: vpss: enable vpss clocks   Prabhakar lad
• [PATCH v3 2/3] media: davinci: vpbe: venc: move the enabling of vpss clocks to driver   Prabhakar lad
• [PATCH v3 3/3] davinic: vpss: trivial cleanup   Prabhakar lad
• [PATCH] ARM: daVinci: dm644x/dm355/dm365: replace V4L2_STD_525_60/625_50 with V4L2_STD_NTSC/PAL   Prabhakar lad
• [PATCH 1/3] mailbox: rename pl320-ipc specific mailbox.h   jaswinder.singh at linaro.org
• Regarding the SPI initialization problem on sam9x5 2000 boards in linux kernel 3.2.6   sambasiva.a at siennaecad.com
• [PATCH] mm: add an option to disable bounce   vinayak
• [PATCH] mm: add an option to disable bounce   vinayak
• [PATCH v8 2/3] of/pci: Provide support for parsing PCI DT ranges property   한진구