[PATCH 5/5] ARM: dts: OMAP2+: Identify GPIO banks that are always powered

Jon Hunter jon-hunter at ti.com
Thu Apr 4 16:16:16 EDT 2013


Add the "ti,gpio-always-on" property to the appropriate GPIO banks to
indicate which banks are always powered and will never lose logic state.

Cc: Benoit Cousson <b-cousson at ti.com>
Signed-off-by: Jon Hunter <jon-hunter at ti.com>
---
 arch/arm/boot/dts/omap2420.dtsi |    4 ++++
 arch/arm/boot/dts/omap2430.dtsi |    4 ++++
 arch/arm/boot/dts/omap3.dtsi    |    1 +
 arch/arm/boot/dts/omap4.dtsi    |    1 +
 arch/arm/boot/dts/omap5.dtsi    |    1 +
 5 files changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index 455b239..76446ff 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -34,6 +34,7 @@
 			reg = <0x48018000 0x200>;
 			interrupts = <29>;
 			ti,hwmods = "gpio1";
+			ti,gpio-always-on;
 			#gpio-cells = <2>;
 			gpio-controller;
 			#interrupt-cells = <2>;
@@ -45,6 +46,7 @@
 			reg = <0x4801a000 0x200>;
 			interrupts = <30>;
 			ti,hwmods = "gpio2";
+			ti,gpio-always-on;
 			#gpio-cells = <2>;
 			gpio-controller;
 			#interrupt-cells = <2>;
@@ -56,6 +58,7 @@
 			reg = <0x4801c000 0x200>;
 			interrupts = <31>;
 			ti,hwmods = "gpio3";
+			ti,gpio-always-on;
 			#gpio-cells = <2>;
 			gpio-controller;
 			#interrupt-cells = <2>;
@@ -67,6 +70,7 @@
 			reg = <0x4801e000 0x200>;
 			interrupts = <32>;
 			ti,hwmods = "gpio4";
+			ti,gpio-always-on;
 			#gpio-cells = <2>;
 			gpio-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index 477b120..ca2c4a3 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -34,6 +34,7 @@
 			reg = <0x4900c000 0x200>;
 			interrupts = <29>;
 			ti,hwmods = "gpio1";
+			ti,gpio-always-on;
 			#gpio-cells = <2>;
 			gpio-controller;
 			#interrupt-cells = <2>;
@@ -45,6 +46,7 @@
 			reg = <0x4900e000 0x200>;
 			interrupts = <30>;
 			ti,hwmods = "gpio2";
+			ti,gpio-always-on;
 			#gpio-cells = <2>;
 			gpio-controller;
 			#interrupt-cells = <2>;
@@ -56,6 +58,7 @@
 			reg = <0x49010000 0x200>;
 			interrupts = <31>;
 			ti,hwmods = "gpio3";
+			ti,gpio-always-on;
 			#gpio-cells = <2>;
 			gpio-controller;
 			#interrupt-cells = <2>;
@@ -67,6 +70,7 @@
 			reg = <0x49012000 0x200>;
 			interrupts = <32>;
 			ti,hwmods = "gpio4";
+			ti,gpio-always-on;
 			#gpio-cells = <2>;
 			gpio-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 3344f05..626406f 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -116,6 +116,7 @@
 			reg = <0x48310000 0x200>;
 			interrupts = <29>;
 			ti,hwmods = "gpio1";
+			ti,gpio-always-on;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 3329140..627f6ca 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -140,6 +140,7 @@
 			reg = <0x4a310000 0x200>;
 			interrupts = <0 29 0x4>;
 			ti,hwmods = "gpio1";
+			ti,gpio-always-on;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index f4c71d9..82a4b03 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -133,6 +133,7 @@
 			reg = <0x4ae10000 0x200>;
 			interrupts = <0 29 0x4>;
 			ti,hwmods = "gpio1";
+			ti,gpio-always-on;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-- 
1.7.10.4




More information about the linux-arm-kernel mailing list