September 2023 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Fri Sep 1 00:52:31 PDT 2023
Ending: Sat Sep 30 19:20:21 PDT 2023
Messages: 315

• (subset) [PATCH 00/31] Fix and improve Rockchip RK3128 support   Mark Brown
• (subset) [PATCH 01/31] dt-bindings: mfd: syscon: Add rockchip,rk3128-qos compatible   Lee Jones
• (subset) [PATCH v12 0/4] Enable IPQ5332 USB2   Bjorn Andersson
• (subset) [PATCH v12 0/4] Enable IPQ5332 USB2   Vinod Koul
• (subset) [PATCH v3 00/16] phy: qcom-qmp-usb: convert to newer style of bindings   Vinod Koul
• (subset) [PATCH v3 00/18] phy: qcom-qmp-pcie: convert to newer style of bindings   Bjorn Andersson
• (subset) [PATCH V4 0/4] Enable IPQ5018 USB2 support   Vinod Koul
• (subset) [PATCH v4 00/10] phy: qcom-qmp-combo: convert to newer style of bindings   Bjorn Andersson
• (subset) [PATCH v9 0/7] Initial support Cadence MHDP8501(HDMI/DP) for i.MX8MQ   Vinod Koul
• [bug report] phy: qcom: Introduce M31 USB PHY driver   Dan Carpenter
• [EXT] Re: [PATCH v3 2/2] phy: freescale: add Samsung HDMI PHY   Sandor Yu
• [EXT] Re: [PATCH v3 2/2] phy: freescale: add Samsung HDMI PHY   Luca Ceresoli
• [IGNORE][PATCH v4 01/11] dt-bindings: Document common device controller bindings   Gatien CHEVALLIER
• [PATCH -next] phy: qcom: phy-qcom-m31: change m31_ipq5332_regs to static   Vinod Koul
• [PATCH -next] phy: qcom: phy-qcom-m31: fix wrong pointer pass to PTR_ERR()   Vinod Koul
• [PATCH -next v2] phy: realtek: usb: Drop unnecessary error check for debugfs_create_dir()   Jinjie Ruan
• [PATCH -next v2] phy: realtek: usb: Drop unnecessary error check for debugfs_create_dir()   Greg Kroah-Hartman
• [PATCH -next v2] phy: realtek: usb: Drop unnecessary error check for debugfs_create_dir()   Vinod Koul
• [PATCH 0/4] phy: qcom-qmp-combo: correct sm8550 PHY programming   Dmitry Baryshkov
• [PATCH 0/5] Add USB Support on Qualcomm's SDX75 Platform   Rohit Agarwal
• [PATCH 0/8] Enable USB3 for Qualcomm IPQ5332   Praveenkumar I
• [PATCH 08/31] phy: rockchip-inno-usb2: Split ID interrupt phy registers   Vinod Koul
• [PATCH 1/2] phy: qcom-qmp-combo: Square out 8550 POWER_STATE_CONFIG1   Abel Vesa
• [PATCH 1/2] phy: qcom-qmp-combo: Square out 8550 POWER_STATE_CONFIG1   Dmitry Baryshkov
• [PATCH 1/3] phy: mapphone-mdm6600: Fix runtime disable on probe   Tony Lindgren
• [PATCH 1/3] phy: mapphone-mdm6600: Fix runtime disable on probe   Sebastian Reichel
• [PATCH 1/4] dt-bindings: phy: qcom,snps-eusb2-repeater: Add magic tuning overrides   Rob Herring
• [PATCH 1/4] dt-bindings: phy: qcom,snps-eusb2-repeater: Add magic tuning overrides   Konrad Dybcio
• [PATCH 1/4] phy: qcom-qmp-combo: correct sm8550 PHY programming   Dmitry Baryshkov
• [PATCH 1/4] phy: qcom-qmp-combo: correct sm8550 PHY programming   Neil Armstrong
• [PATCH 1/4] phy: qcom-qmp-combo: correct sm8550 PHY programming   Dmitry Baryshkov
• [PATCH 1/5] dt-bindings: phy: qcom,snps-eusb2-phy: Add compatible for SDX75   Rohit Agarwal
• [PATCH 1/5] dt-bindings: phy: qcom,snps-eusb2-phy: Add compatible for SDX75   Krzysztof Kozlowski
• [PATCH 1/8] dt-bindings: phy: qcom,uniphy-usb: Document qcom,uniphy-usb phy   Praveenkumar I
• [PATCH 1/8] dt-bindings: phy: qcom,uniphy-usb: Document qcom,uniphy-usb phy   Krzysztof Kozlowski
• [PATCH 2/3] phy: mapphone-mdm6600: Fix runtime PM for remove   Tony Lindgren
• [PATCH 2/3] phy: mapphone-mdm6600: Fix runtime PM for remove   Sebastian Reichel
• [PATCH 2/3] phy: mapphone-mdm6600: Fix runtime PM for remove   Tony Lindgren
• [PATCH 2/4] phy: qcom-qmp-combo: fix the prefix for the PCS_USB v6 registers   Dmitry Baryshkov
• [PATCH 2/5] dt-bindings: phy: Add qcom,sdx75-qmp-usb3-uni schema file   Rohit Agarwal
• [PATCH 2/5] dt-bindings: phy: Add qcom,sdx75-qmp-usb3-uni schema file   Krzysztof Kozlowski
• [PATCH 2/5] dt-bindings: phy: Add qcom,sdx75-qmp-usb3-uni schema file   Rohit Agarwal
• [PATCH 2/5] dt-bindings: phy: Add qcom,sdx75-qmp-usb3-uni schema file   Krzysztof Kozlowski
• [PATCH 2/5] dt-bindings: phy: Add qcom,sdx75-qmp-usb3-uni schema file   Rohit Agarwal
• [PATCH 2/5] dt-bindings: phy: Add qcom,sdx75-qmp-usb3-uni schema file   Rob Herring
• [PATCH 2/8] phy: qcom: Introduce Super-Speed USB UNIPHY driver   Praveenkumar I
• [PATCH 2/8] phy: qcom: Introduce Super-Speed USB UNIPHY driver   Dmitry Baryshkov
• [PATCH 3/3] phy: mapphone-mdm6600: Fix pinctrl_pm handling for sleep pins   Tony Lindgren
• [PATCH 3/3] phy: mapphone-mdm6600: Fix pinctrl_pm handling for sleep pins   Sebastian Reichel
• [PATCH 3/3] phy: mapphone-mdm6600: Fix pinctrl_pm handling for sleep pins   Tony Lindgren
• [PATCH 3/4] phy: qcom-qmp-usb: move PCS v6 register to the proper header   Dmitry Baryshkov
• [PATCH 3/5] dt-bindings: usb: dwc3: Add missing SDX65 compatible   Rohit Agarwal
• [PATCH 3/5] dt-bindings: usb: dwc3: Add missing SDX65 compatible   Krzysztof Kozlowski
• [PATCH 3/5] dt-bindings: usb: dwc3: Add missing SDX65 compatible   Krzysztof Kozlowski
• [PATCH 3/5] dt-bindings: usb: dwc3: Add missing SDX65 compatible   Rohit Agarwal
• [PATCH 3/6] phy: qualcomm: phy-qcom-qmp-ufs: Add High Speed Gear 5 support for SM8550   Can Guo
• [PATCH 3/6] phy: qualcomm: phy-qcom-qmp-ufs: Add High Speed Gear 5 support for SM8550   Nitin Rawat
• [PATCH 3/6] phy: qualcomm: phy-qcom-qmp-ufs: Add High Speed Gear 5 support for SM8550   Can Guo
• [PATCH 3/6] phy: qualcomm: phy-qcom-qmp-ufs: Add High Speed Gear 5 support for SM8550   Manivannan Sadhasivam
• [PATCH 3/8] arm64: dts: qcom: ipq5332: Add USB Super-Speed PHY node   Praveenkumar I
• [PATCH 3/8] arm64: dts: qcom: ipq5332: Add USB Super-Speed PHY node   Konrad Dybcio
• [PATCH 3/8] arm64: dts: qcom: ipq5332: Add USB Super-Speed PHY node   Praveenkumar I
• [PATCH 3/8] arm64: dts: qcom: ipq5332: Add USB Super-Speed PHY node   Dmitry Baryshkov
• [PATCH 4/4] phy: qcom-qmp-combo: use v6 registers in v6 regs layout   Dmitry Baryshkov
• [PATCH 4/4] phy: qcom-qmp-combo: use v6 registers in v6 regs layout   Neil Armstrong
• [PATCH 4/4] phy: qcom-qmp-combo: use v6 registers in v6 regs layout   Dmitry Baryshkov
• [PATCH 4/5] dt-bindings: usb: dwc3: Add SDX75 compatible   Rohit Agarwal
• [PATCH 4/5] dt-bindings: usb: dwc3: Add SDX75 compatible   Krzysztof Kozlowski
• [PATCH 4/6] phy: qualcomm: phy-qcom-qmp-ufs: Move data structs and setting tables to header   Can Guo
• [PATCH 4/6] phy: qualcomm: phy-qcom-qmp-ufs: Move data structs and setting tables to header   Nitin Rawat
• [PATCH 4/6] phy: qualcomm: phy-qcom-qmp-ufs: Move data structs and setting tables to header   Dmitry Baryshkov
• [PATCH 4/6] phy: qualcomm: phy-qcom-qmp-ufs: Move data structs and setting tables to header   Manivannan Sadhasivam
• [PATCH 4/6] phy: qualcomm: phy-qcom-qmp-ufs: Move data structs and setting tables to header   Dmitry Baryshkov
• [PATCH 4/6] phy: qualcomm: phy-qcom-qmp-ufs: Move data structs and setting tables to header   Manivannan Sadhasivam
• [PATCH 4/6] phy: qualcomm: phy-qcom-qmp-ufs: Move data structs and setting tables to header   Bjorn Andersson
• [PATCH 4/6] phy: qualcomm: phy-qcom-qmp-ufs: Move data structs and setting tables to header   Bjorn Andersson
• [PATCH 4/6] phy: qualcomm: phy-qcom-qmp-ufs: Move data structs and setting tables to header   Manivannan Sadhasivam
• [PATCH 4/8] dt-bindings: usb: dwc3: Add clocks on Qualcomm IPQ5332   Praveenkumar I
• [PATCH 4/8] dt-bindings: usb: dwc3: Add clocks on Qualcomm IPQ5332   Krzysztof Kozlowski
• [PATCH 4/8] dt-bindings: usb: dwc3: Add clocks on Qualcomm IPQ5332   Dmitry Baryshkov
• [PATCH 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support   Rohit Agarwal
• [PATCH 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support   Krzysztof Kozlowski
• [PATCH 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support   Rohit Agarwal
• [PATCH 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support   Dmitry Baryshkov
• [PATCH 5/8] arm64: dts: qcom: ipq5332: Add clocks for USB Super-Speed   Praveenkumar I
• [PATCH 5/8] arm64: dts: qcom: ipq5332: Add clocks for USB Super-Speed   Dmitry Baryshkov
• [PATCH 6/8] arm64: dts: qcom: ipq5332: Add Super-Speed UNIPHY in USB node   Praveenkumar I
• [PATCH 6/8] arm64: dts: qcom: ipq5332: Add Super-Speed UNIPHY in USB node   Konrad Dybcio
• [PATCH 6/8] arm64: dts: qcom: ipq5332: Add Super-Speed UNIPHY in USB node   Praveenkumar I
• [PATCH 6/8] arm64: dts: qcom: ipq5332: Add Super-Speed UNIPHY in USB node   Dmitry Baryshkov
• [PATCH 6/8] arm64: dts: qcom: ipq5332: Add Super-Speed UNIPHY in USB node   Dmitry Baryshkov
• [PATCH 7/8] arm64: dts: qcom: ipq5332: Enable USB Super-Speed PHY   Praveenkumar I
• [PATCH 8/8] arm64: defconfig: Enable qcom USB UNIPHY driver   Praveenkumar I
• [PATCH 8/8] arm64: defconfig: Enable qcom USB UNIPHY driver   Krzysztof Kozlowski
• [PATCH] dt-bindings: phy: qcom,ipq8074-qmp-pcie: fix warning regarding reg size   Vinod Koul
• [PATCH] media: sunxi: a83-mips-csi2: also select GENERIC_PHY   Randy Dunlap
• [PATCH] phy: qcom-m31: Fix error code in probe()   Dan Carpenter
• [PATCH] phy: qcom-m31: Fix error code in probe()   Varadarajan Narayanan
• [PATCH] phy: qcom-m31: Fix error code in probe()   Dan Carpenter
• [PATCH] phy: qcom-m31: Fix error code in probe()   Deepak R Varma
• [PATCH] phy: qcom-m31: Fix error code in probe()   Dan Carpenter
• [PATCH] phy: qcom: m31: Remove unwanted qphy->vreg is NULL check   Varadarajan Narayanan
• [PATCH] phy: qcom: m31: Remove unwanted qphy->vreg is NULL check   Vinod Koul
• [PATCH] phy: qualcomm: Fix typos in comments   Bo Liu
• [PATCH] phy: qualcomm: Fix typos in comments   Konrad Dybcio
• [PATCH] phy: qualcomm: Fix typos in comments   Vinod Koul
• [PATCH] phy: realtek: Realtek PHYs should depend on ARCH_REALTEK   Geert Uytterhoeven
• [PATCH] phy: sun4i-usb: Fix a W=1 compilation failure   Christophe JAILLET
• [PATCH] phy: sun4i-usb: Fix a W=1 compilation failure   Andre Przywara
• [PATCH] phy: sun4i-usb: Fix a W=1 compilation failure   Christophe JAILLET
• [PATCH] phy: sun4i-usb: Fix a W=1 compilation failure   Andre Przywara
• [PATCH] phy: sun4i-usb: Fix a W=1 compilation failure   Dan Carpenter
• [PATCH] phy: sun4i-usb: Fix a W=1 compilation failure   Andre Przywara
• [PATCH] phy: sun4i-usb: Fix a W=1 compilation failure   Jernej Škrabec
• [PATCH v1 0/5] arm64: qcom: sa8775p: add support for EP PCIe   Mrinmay Sarkar
• [PATCH v1 1/5] dt-bindings: PCI: qcom-ep: Add support for SA8775P SoC   Mrinmay Sarkar
• [PATCH v1 1/5] dt-bindings: PCI: qcom-ep: Add support for SA8775P SoC   Manivannan Sadhasivam
• [PATCH v1 1/5] dt-bindings: PCI: qcom-ep: Add support for SA8775P SoC   Rob Herring
• [PATCH v1 2/5] PCI: qcom-ep: Add support for SA8775P SoC   Mrinmay Sarkar
• [PATCH v1 2/5] PCI: qcom-ep: Add support for SA8775P SoC   Konrad Dybcio
• [PATCH v1 2/5] PCI: qcom-ep: Add support for SA8775P SoC   Manivannan Sadhasivam
• [PATCH v1 3/5] phy: qcom-qmp-pcie: add endpoint support for sa8775p   Mrinmay Sarkar
• [PATCH v1 3/5] phy: qcom-qmp-pcie: add endpoint support for sa8775p   Manivannan Sadhasivam
• [PATCH v1 4/5] PCI: epf-mhi: Add support for SA8775P   Mrinmay Sarkar
• [PATCH v1 4/5] PCI: epf-mhi: Add support for SA8775P   Konrad Dybcio
• [PATCH v1 4/5] PCI: epf-mhi: Add support for SA8775P   Manivannan Sadhasivam
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Vladimir Oltean
• [PATCH v1 5/5] arm64: dts: qcom: sa8775p: Add ep pcie0 controller node   Mrinmay Sarkar
• [PATCH v1 5/5] arm64: dts: qcom: sa8775p: Add ep pcie0 controller node   Manivannan Sadhasivam
• [PATCH v2 0/2] 8550 USB QMPPHY fixups   Konrad Dybcio
• [PATCH v2 0/2] phy: qcom-qmp-usb: fix initialization of PCS_USB   Adrien Thierry
• [PATCH v2 0/2] phy: qcom-qmp-usb: fix initialization of PCS_USB   Vinod Koul
• [PATCH v2 0/3] phy: qcom-qmp-combo: correct sm8550 PHY programming   Dmitry Baryshkov
• [PATCH v2 0/4] EUSB2 repeater init sequence override   Konrad Dybcio
• [PATCH v2 0/4] EUSB2 repeater init sequence override   Vinod Koul
• [PATCH v2 0/5] Add USB Support on Qualcomm's SDX75 Platform   Rohit Agarwal
• [PATCH v2 1/2] phy: qcom-qmp-combo: Square out 8550 POWER_STATE_CONFIG1   Konrad Dybcio
• [PATCH v2 1/2] phy: qcom-qmp-combo: Square out 8550 POWER_STATE_CONFIG1   Dmitry Baryshkov
• [PATCH v2 1/2] phy: qcom-qmp-combo: Square out 8550 POWER_STATE_CONFIG1   Konrad Dybcio
• [PATCH v2 1/2] phy: qcom-qmp-combo: Square out 8550 POWER_STATE_CONFIG1   kernel test robot
• [PATCH v2 1/3] phy: mapphone-mdm6600: Fix runtime disable on probe   Tony Lindgren
• [PATCH v2 1/3] phy: qcom-qmp-combo: fix the prefix for the PCS_USB v6 registers   Dmitry Baryshkov
• [PATCH v2 1/4] dt-bindings: phy: qcom,snps-eusb2-repeater: Add magic tuning overrides   Konrad Dybcio
• [PATCH v2 1/4] dt-bindings: phy: qcom,snps-eusb2-repeater: Add magic tuning overrides   Rob Herring
• [PATCH v2 1/5] dt-bindings: phy: qcom,snps-eusb2-phy: Add compatible for SDX75   Rohit Agarwal
• [PATCH v2 2/2] phy: freescale: add Samsung HDMI PHY   Lucas Stach
• [PATCH v2 2/2] phy: freescale: add Samsung HDMI PHY   Vinod Koul
• [PATCH v2 2/2] phy: qcom-qmp-combo: initialize PCS_USB registers   Konrad Dybcio
• [PATCH v2 2/3] phy: mapphone-mdm6600: Fix runtime PM for remove   Tony Lindgren
• [PATCH v2 2/3] phy: mapphone-mdm6600: Fix runtime PM for remove   Sebastian Reichel
• [PATCH v2 2/3] phy: qcom-qmp-usb: move PCS v6 register to the proper header   Dmitry Baryshkov
• [PATCH v2 2/4] phy: qualcomm: phy-qcom-eusb2-repeater: Use regmap_fields   Konrad Dybcio
• [PATCH v2 2/5] dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY   Rohit Agarwal
• [PATCH v2 2/5] dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY   Dmitry Baryshkov
• [PATCH v2 2/5] dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY   Rohit Agarwal
• [PATCH v2 2/5] dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY   Rohit Agarwal
• [PATCH v2 2/5] dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY   Dmitry Baryshkov
• [PATCH v2 2/5] dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY   Rohit Agarwal
• [PATCH v2 3/3] phy: mapphone-mdm6600: Fix pinctrl_pm handling for sleep pins   Tony Lindgren
• [PATCH v2 3/3] phy: mapphone-mdm6600: Fix pinctrl_pm handling for sleep pins   Sebastian Reichel
• [PATCH v2 3/3] phy: qcom-qmp-combo: use v6 registers in v6 regs layout   Dmitry Baryshkov
• [PATCH v2 3/3] phy: qcom-qmp-combo: use v6 registers in v6 regs layout   Konrad Dybcio
• [PATCH v2 3/3] phy: qcom-qmp-combo: use v6 registers in v6 regs layout   Dmitry Baryshkov
• [PATCH v2 3/3] phy: qcom-qmp-combo: use v6 registers in v6 regs layout   Konrad Dybcio
• [PATCH v2 3/4] phy: qualcomm: phy-qcom-eusb2-repeater: Zero out untouched tuning regs   Konrad Dybcio
• [PATCH v2 3/5] dt-bindings: usb: qcom,dwc3: Fix SDX65 clocks   Rohit Agarwal
• [PATCH v2 3/5] dt-bindings: usb: qcom,dwc3: Fix SDX65 clocks   Rob Herring
• [PATCH v2 3/5] dt-bindings: usb: qcom,dwc3: Fix SDX65 clocks   Dmitry Baryshkov
• [PATCH v2 3/5] dt-bindings: usb: qcom,dwc3: Fix SDX65 clocks   Rohit Agarwal
• [PATCH v2 3/5] dt-bindings: usb: qcom,dwc3: Fix SDX65 clocks   Dmitry Baryshkov
• [PATCH v2 4/4] phy: qualcomm: phy-qcom-eusb2-repeater: Add tuning overrides   Konrad Dybcio
• [PATCH v2 4/5] dt-bindings: usb: dwc3: Add SDX75 compatible   Rohit Agarwal
• [PATCH v2 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support   Rohit Agarwal
• [PATCH v2 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support   Dmitry Baryshkov
• [PATCH v2 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support   Rohit Agarwal
• [PATCH v2 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support   Dmitry Baryshkov
• [PATCH v2 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support   Rohit Agarwal
• [PATCH v3 0/2] 8550 USB QMPPHY fixups   Konrad Dybcio
• [PATCH v3 0/2] 8550 USB QMPPHY fixups   Dmitry Baryshkov
• [PATCH v3 0/2] 8550 USB QMPPHY fixups   Vinod Koul
• [PATCH v3 0/3] phy: qcom-qmp-combo: correct USB v6 registers   Dmitry Baryshkov
• [PATCH V3 0/4] Enable IPQ5018 USB2 support   Nitheesh Sekar
• [PATCH v3 0/5] Add USB Support on Qualcomm's SDX75 Platform   Rohit Agarwal
• [PATCH v3 00/11] Introduce STM32 Firewall framework   Gatien CHEVALLIER
• [PATCH v3 00/15] drm/msm/hdmi & phy: use generic PHY framework   Dmitry Baryshkov
• [PATCH v3 01/15] phy: Add HDMI configuration options   Dmitry Baryshkov
• [PATCH v3 01/15] phy: Add HDMI configuration options   Konrad Dybcio
• [PATCH v3 02/15] phy: qualcomm: add QMP HDMI PHY driver   Dmitry Baryshkov
• [PATCH v3 03/15] phy: qcom: apq8064-sata: extract UNI PLL register defines   Dmitry Baryshkov
• [PATCH v3 04/15] phy: qcom-uniphy: add more registers from display PHYs   Dmitry Baryshkov
• [PATCH v3 05/15] phy: qualcomm: add legacy HDMI PHY driver   Dmitry Baryshkov
• [PATCH v3 06/15] phy: qualcomm: add MSM8974 HDMI PHY support   Dmitry Baryshkov
• [PATCH v3 07/15] phy: qualcomm: add MSM8x60 HDMI PHY support   Dmitry Baryshkov
• [PATCH v3 08/15] drm/msm/hdmi: move the alt_iface clock to the hpd list   Dmitry Baryshkov
• [PATCH v3 09/15] drm/msm/hdmi: simplify extp clock handling   Dmitry Baryshkov
• [PATCH v3 1/2] dt-bindings: phy: add binding for the i.MX8MP HDMI PHY   Lucas Stach
• [PATCH v3 1/2] dt-bindings: phy: add binding for the i.MX8MP HDMI PHY   Rob Herring
• [PATCH v3 1/2] dt-bindings: phy: add binding for the i.MX8MP HDMI PHY   Luca Ceresoli
• [PATCH v3 1/2] phy: qcom-qmp-combo: Square out 8550 POWER_STATE_CONFIG1   Konrad Dybcio
• [PATCH v3 1/3] phy: qcom-qmp-combo: fix the prefix for the PCS_USB v6 registers   Dmitry Baryshkov
• [PATCH V3 1/4] dt-bindings: phy: qcom,m31: Add IPQ5018 compatible   Nitheesh Sekar
• [PATCH v3 1/5] dt-bindings: phy: qcom,snps-eusb2-phy: Add compatible for SDX75   Rohit Agarwal
• [PATCH v3 10/15] drm/msm/hdmi: correct indentation of HDMI bridge functions   Dmitry Baryshkov
• [PATCH v3 11/15] drm/msm/hdmi: switch to atomic_pre_enable/post_disable   Dmitry Baryshkov
• [PATCH v3 12/15] drm/msm/hdmi: set infoframes on all pre_enable calls   Dmitry Baryshkov
• [PATCH v3 13/15] drm/msm/hdmi: pair msm_hdmi_phy_powerup with msm_hdmi_phy_powerdown   Dmitry Baryshkov
• [PATCH v3 14/15] drm/msm/hdmi: switch to generic PHY subsystem   Dmitry Baryshkov
• [PATCH v3 15/15] drm/msm/hdmi: drop old HDMI PHY code   Dmitry Baryshkov
• [PATCH v3 2/2] phy: freescale: add Samsung HDMI PHY   Lucas Stach
• [PATCH v3 2/2] phy: freescale: add Samsung HDMI PHY   Alexander Stein
• [PATCH v3 2/2] phy: freescale: add Samsung HDMI PHY   Frieder Schrempf
• [PATCH v3 2/2] phy: freescale: add Samsung HDMI PHY   Luca Ceresoli
• [PATCH v3 2/2] phy: qcom-qmp-combo: initialize PCS_USB registers   Konrad Dybcio
• [PATCH V3 2/2] phy: qcom-qmp-ufs: Add Phy Configuration support for SC7280   Nitin Rawat
• [PATCH V3 2/2] phy: qcom-qmp-ufs: Add Phy Configuration support for SC7280   Dmitry Baryshkov
• [PATCH V3 2/2] phy: qcom-qmp-ufs: Add Phy Configuration support for SC7280   Nitin Rawat
• [PATCH V3 2/2] phy: qcom-qmp-ufs: Add Phy Configuration support for SC7280   Dmitry Baryshkov
• [PATCH V3 2/2] phy: qcom-qmp-ufs: Add Phy Configuration support for SC7280   Nitin Rawat
• [PATCH V3 2/2] phy: qcom-qmp-ufs: Add Phy Configuration support for SC7280   Dmitry Baryshkov
• [PATCH v3 2/3] phy: qcom-qmp-usb: move PCS v6 register to the proper header   Dmitry Baryshkov
• [PATCH V3 2/4] phy: qcom-m31: Add compatible, phy init sequence for IPQ5018   Nitheesh Sekar
• [PATCH V3 2/4] phy: qcom-m31: Add compatible, phy init sequence for IPQ5018   Dmitry Baryshkov
• [PATCH V3 2/4] phy: qcom-m31: Add compatible, phy init sequence for IPQ5018   Nitheesh Sekar
• [PATCH v3 2/5] dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY   Rohit Agarwal
• [PATCH v3 2/5] dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY   Krzysztof Kozlowski
• [PATCH v3 3/3] phy: qcom-qmp-combo: use v6 registers in v6 regs layout   Dmitry Baryshkov
• [PATCH V3 3/4] arm64: dts: qcom: ipq5018: Add USB related nodes   Nitheesh Sekar
• [PATCH v3 3/5] dt-bindings: usb: qcom,dwc3: Fix SDX65 clocks   Rohit Agarwal
• [PATCH V3 4/4] arm64: dts: qcom: ipq5018: Enable USB   Nitheesh Sekar
• [PATCH V3 4/4] arm64: dts: qcom: ipq5018: Enable USB   Dmitry Baryshkov
• [PATCH v3 4/5] dt-bindings: usb: dwc3: Add SDX75 compatible   Rohit Agarwal
• [PATCH v3 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support   Rohit Agarwal
• [PATCH v3 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support   Dmitry Baryshkov
• [PATCH v3 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support   Rohit Agarwal
• [PATCH v3 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support   Dmitry Baryshkov
• [PATCH v3 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support   Rohit Agarwal
• [PATCH v3] dt-bindings: phy: Add compatible for Mediatek MT8188   Shuijing Li
• [PATCH v3] dt-bindings: phy: Add compatible for Mediatek MT8188   AngeloGioacchino Del Regno
• [PATCH v3] dt-bindings: phy: Add compatible for Mediatek MT8188   Conor Dooley
• [PATCH v3] dt-bindings: phy: Add compatible for Mediatek MT8188   Vinod Koul
• [PATCH v3] dt-bindings: phy: st: convert phy-stih407-usb to DT schema   Vinod Koul
• [PATCH V4 0/2] Add Phy Configuration support for SC7280   Nitin Rawat
• [PATCH V4 0/2] Add Phy Configuration support for SC7280   Vinod Koul
• [PATCH v4 0/3] drm: simplify support for transparent DRM bridges   Dmitry Baryshkov
• [PATCH v4 0/3] drm: simplify support for transparent DRM bridges   Laurent Pinchart
• [PATCH v4 0/3] drm: simplify support for transparent DRM bridges   Laurent Pinchart
• [PATCH v4 0/3] drm: simplify support for transparent DRM bridges   Dmitry Baryshkov
• [PATCH v4 0/3] drm: simplify support for transparent DRM bridges   Dmitry Baryshkov
• [PATCH V4 0/4] Enable IPQ5018 USB2 support   Nitheesh Sekar
• [PATCH v4 0/5] Add USB Support on Qualcomm's SDX75 Platform   Rohit Agarwal
• [PATCH v4 05/11] firewall: introduce stm32_firewall framework   Gatien CHEVALLIER
• [PATCH V4 1/2] dt-bindings: phy: Add QMP UFS PHY comptible for SC7280   Nitin Rawat
• [PATCH V4 1/2] dt-bindings: phy: Add QMP UFS PHY comptible for SC7280   Conor Dooley
• [PATCH V4 1/4] dt-bindings: phy: qcom,m31: Add IPQ5018 compatible   Nitheesh Sekar
• [PATCH v4 1/5] dt-bindings: phy: qcom,snps-eusb2-phy: Add compatible for SDX75   Rohit Agarwal
• [PATCH V4 2/2] phy: qcom-qmp-ufs: Add Phy Configuration support for SC7280   Nitin Rawat
• [PATCH V4 2/2] phy: qcom-qmp-ufs: Add Phy Configuration support for SC7280   Dmitry Baryshkov
• [PATCH V4 2/4] phy: qcom-m31: Add compatible, phy init sequence for IPQ5018   Nitheesh Sekar
• [PATCH v4 2/5] dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY   Rohit Agarwal
• [PATCH V4 3/4] arm64: dts: qcom: ipq5018: Add USB related nodes   Nitheesh Sekar
• [PATCH v4 3/5] dt-bindings: usb: qcom,dwc3: Fix SDX65 clocks   Rohit Agarwal
• [PATCH V4 4/4] arm64: dts: qcom: ipq5018: Enable USB   Nitheesh Sekar
• [PATCH v4 4/5] dt-bindings: usb: dwc3: Add SDX75 compatible   Rohit Agarwal
• [PATCH v4 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support   Rohit Agarwal
• [PATCH v4 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support   Dmitry Baryshkov
• [PATCH v5 00/11] Introduce STM32 Firewall framework   Gatien Chevallier
• [PATCH v5 01/11] dt-bindings: document generic access controller   Gatien Chevallier
• [PATCH v5 02/11] dt-bindings: treewide: add access-controller description   Gatien Chevallier
• [PATCH v5 02/11] dt-bindings: treewide: add access-controller description   Rob Herring
• [PATCH v5 03/11] dt-bindings: bus: document RIFSC   Gatien Chevallier
• [PATCH v5 04/11] dt-bindings: bus: document ETZPC   Gatien Chevallier
• [PATCH v5 05/11] firewall: introduce stm32_firewall framework   Gatien Chevallier
• [PATCH v5 06/11] of: property: fw_devlink: Add support for "access-controller"   Gatien Chevallier
• [PATCH v5 07/11] bus: rifsc: introduce RIFSC firewall controller driver   Gatien Chevallier
• [PATCH v5 08/11] arm64: dts: st: add RIFSC as an access controller for STM32MP25x boards   Gatien Chevallier
• [PATCH v5 09/11] bus: etzpc: introduce ETZPC firewall controller driver   Gatien Chevallier
• [PATCH v5 10/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards   Gatien Chevallier
• [PATCH v5 11/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards   Gatien Chevallier
• [PATCH v6 0/8] Initial support for Cadence MHDP8501(HDMI/DP) for i.MX8MQ   Vinod Koul
• [PATCH v8 2/7] phy: Add HDMI configuration options   Vinod Koul
• [PATCH v8 2/7] phy: Add HDMI configuration options   Vinod Koul
• [PATCH v9 0/7] Initial support Cadence MHDP8501(HDMI/DP) for i.MX8MQ   Sandor Yu
• [PATCH v9 1/7] drm: bridge: Cadence: convert mailbox functions to macro functions   Sandor Yu
• [PATCH v9 1/7] drm: bridge: Cadence: convert mailbox functions to macro functions   Dmitry Baryshkov
• [PATCH v9 1/7] drm: bridge: Cadence: convert mailbox functions to macro functions   Sandor Yu
• [PATCH v9 2/7] phy: Add HDMI configuration options   Sandor Yu
• [PATCH v9 3/7] dt-bindings: display: bridge: Add Cadence MHDP850   Sandor Yu
• [PATCH v9 4/7] drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver   Sandor Yu
• [PATCH v9 5/7] dt-bindings: phy: Add Freescale iMX8MQ DP and HDMI PHY   Sandor Yu
• [PATCH v9 6/7] phy: freescale: Add DisplayPort PHY driver for i.MX8MQ   Sandor Yu
• [PATCH v9 6/7] phy: freescale: Add DisplayPort PHY driver for i.MX8MQ   Alexander Stein
• [PATCH v9 7/7] phy: freescale: Add HDMI PHY driver for i.MX8MQ   Sandor Yu
• [RFC PATCH net-next 8/8] dt-bindings: net: fsl,backplane-anlt: new binding document   Vladimir Oltean
• [RFC PATCH v2 net-next 00/15] Add C72/C73 copper backplane support for LX2160   Vladimir Oltean
• [RFC PATCH v2 net-next 01/15] phy: introduce phy_get_status() and use it to report CDR lock   Vladimir Oltean
• [RFC PATCH v2 net-next 02/15] phy: introduce the PHY_MODE_ETHTOOL mode for phy_set_mode_ext()   Vladimir Oltean
• [RFC PATCH v2 net-next 03/15] phy: ethernet: add configuration interface for copper backplane Ethernet PHYs   Vladimir Oltean
• [RFC PATCH v2 net-next 03/15] phy: ethernet: add configuration interface for copper backplane Ethernet PHYs   Simon Horman
• [RFC PATCH v2 net-next 03/15] phy: ethernet: add configuration interface for copper backplane Ethernet PHYs   Simon Horman
• [RFC PATCH v2 net-next 04/15] phy: allow querying the address of protocol converters through phy_get_status()   Vladimir Oltean
• [RFC PATCH v2 net-next 04/15] phy: allow querying the address of protocol converters through phy_get_status()   Vinod Koul
• [RFC PATCH v2 net-next 05/15] net: add 25GBase-KR-S and 25GBase-CR-S to ethtool link mode UAPI   Vladimir Oltean
• [RFC PATCH v2 net-next 06/15] net: mii: add C73 base page helpers   Vladimir Oltean
• [RFC PATCH v2 net-next 07/15] net: phylink: centralize phy_interface_mode_is_8023z() && phylink_autoneg_inband() checks   Vladimir Oltean
• [RFC PATCH v2 net-next 07/15] net: phylink: centralize phy_interface_mode_is_8023z() && phylink_autoneg_inband() checks   Simon Horman
• [RFC PATCH v2 net-next 08/15] net: phylink: allow PCS to handle C73 autoneg for phy-mode = "internal"   Vladimir Oltean
• [RFC PATCH v2 net-next 09/15] net: ethtool: introduce ethtool_link_mode_str()   Vladimir Oltean
• [RFC PATCH v2 net-next 10/15] net: phylink: support all ethtool port modes with inband modes   Vladimir Oltean
• [RFC PATCH v2 net-next 11/15] net: phylink: support the 25GBase-KR-S and 25GBase-CR-S link modes too   Vladimir Oltean
• [RFC PATCH v2 net-next 12/15] net: phylink: add the 25G link modes to phylink_c73_priority_resolution[]   Vladimir Oltean
• [RFC PATCH v2 net-next 13/15] dt-bindings: lynx-pcs: add properties for backplane mode   Vladimir Oltean
• [RFC PATCH v2 net-next 13/15] dt-bindings: lynx-pcs: add properties for backplane mode   Krzysztof Kozlowski
• [RFC PATCH v2 net-next 14/15] net: pcs: mtip_backplane: add driver for MoreThanIP backplane AN/LT core   Vladimir Oltean
• [RFC PATCH v2 net-next 14/15] net: pcs: mtip_backplane: add driver for MoreThanIP backplane AN/LT core   Simon Horman
• [RFC PATCH v2 net-next 15/15] net: pcs: lynx: use MTIP AN/LT block for copper backplanes   Vladimir Oltean

Last message date: Sat Sep 30 19:20:21 PDT 2023
Archived on: Sat Sep 30 19:20:46 PDT 2023

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...