[PATCH v2 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support

[Rohit Agarwal]

On 9/6/2023 2:08 AM, Dmitry Baryshkov wrote:
> On 05/09/2023 13:30, Rohit Agarwal wrote:
>> Add support for USB3 QMP PHY found in SDX75 platform.
>>
>> Signed-off-by: Rohit Agarwal <quic_rohiagar at quicinc.com>
>> ---
>>   drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 158 
>> ++++++++++++++++++++++++++++++++
>>   1 file changed, 158 insertions(+)
>>
>> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c 
>> b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
>> index 0130bb8..57b8b5b 100644
>> --- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
>> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
>> @@ -23,6 +23,7 @@
>>   #include "phy-qcom-qmp-pcs-misc-v3.h"
>>   #include "phy-qcom-qmp-pcs-usb-v4.h"
>>   #include "phy-qcom-qmp-pcs-usb-v5.h"
>> +#include "phy-qcom-qmp-pcs-usb-v6.h"
>>     /* QPHY_SW_RESET bit */
>>   #define SW_RESET                BIT(0)
>> @@ -858,6 +859,134 @@ static const struct qmp_phy_init_tbl 
>> sdx65_usb3_uniphy_rx_tbl[] = {
>
> [skipped the tables]
>
>> @@ -1556,6 +1685,32 @@ static const struct qmp_phy_cfg 
>> sdx65_usb3_uniphy_cfg = {
>>       .has_pwrdn_delay    = true,
>>   };
>>   +static const struct qmp_phy_cfg sdx75_usb3_uniphy_cfg = {
>> +    .lanes            = 1,
>> +    .offsets        = &qmp_usb_offsets_v5,
>
> v6?
Since the offsets for v5 and v6 are same, I did not introduce a new 
struct with the same values.
Please correct me if I have to introduce v6 offsets.
>
>> +
>> +    .serdes_tbl        = sdx75_usb3_uniphy_serdes_tbl,
>> +    .serdes_tbl_num        = ARRAY_SIZE(sdx75_usb3_uniphy_serdes_tbl),
>> +    .tx_tbl            = sdx75_usb3_uniphy_tx_tbl,
>> +    .tx_tbl_num        = ARRAY_SIZE(sdx75_usb3_uniphy_tx_tbl),
>> +    .rx_tbl            = sdx75_usb3_uniphy_rx_tbl,
>> +    .rx_tbl_num        = ARRAY_SIZE(sdx75_usb3_uniphy_rx_tbl),
>> +    .pcs_tbl        = sdx75_usb3_uniphy_pcs_tbl,
>> +    .pcs_tbl_num        = ARRAY_SIZE(sdx75_usb3_uniphy_pcs_tbl),
>> +    .pcs_usb_tbl        = sdx75_usb3_uniphy_pcs_usb_tbl,
>> +    .pcs_usb_tbl_num    = ARRAY_SIZE(sdx75_usb3_uniphy_pcs_usb_tbl),
>> +    .clk_list        = qmp_v4_sdx55_usbphy_clk_l,
>> +    .num_clks        = ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
>> +    .reset_list        = msm8996_usb3phy_reset_l,
>> +    .num_resets        = ARRAY_SIZE(msm8996_usb3phy_reset_l),
>
> Clocks and resets are gone in 
> https://lore.kernel.org/linux-phy/20230824211952.1397699-1-dmitry.baryshkov@linaro.org/
>
Sure.
>> +    .vreg_list        = qmp_phy_vreg_l,
>> +    .num_vregs        = ARRAY_SIZE(qmp_phy_vreg_l),
>> +    .regs            = qmp_v5_usb3phy_regs_layout,
>
> This must be v6, if the rest of the PHY is using v6 register names.
Same, Shall I introduce v6 struct?

Thanks,
Rohit.
>
>> +    .pcs_usb_offset        = 0x1000,
>> +
>> +    .has_pwrdn_delay    = true,
>> +};
>> +
>>   static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
>>       .lanes            = 1,
>>   @@ -2256,6 +2411,9 @@ static const struct of_device_id 
>> qmp_usb_of_match_table[] = {
>>           .compatible = "qcom,sdx65-qmp-usb3-uni-phy",
>>           .data = &sdx65_usb3_uniphy_cfg,
>>       }, {
>> +        .compatible = "qcom,sdx75-qmp-usb3-uni-phy",
>> +        .data = &sdx75_usb3_uniphy_cfg,
>> +    }, {
>>           .compatible = "qcom,sm6115-qmp-usb3-phy",
>>           .data = &qcm2290_usb3phy_cfg,
>>       }, {
>