[PATCH v3 06/15] phy: qualcomm: add MSM8974 HDMI PHY support
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Thu Sep 28 04:16:20 PDT 2023
Add support for HDMI PHY on Qualcomm MSM8974 / APQ8074 platforms.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
drivers/phy/qualcomm/Kconfig | 2 +-
drivers/phy/qualcomm/Makefile | 1 +
drivers/phy/qualcomm/phy-qcom-hdmi-28hpm.c | 327 ++++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-hdmi-preqmp.c | 1 +
drivers/phy/qualcomm/phy-qcom-hdmi-preqmp.h | 1 +
5 files changed, 331 insertions(+), 1 deletion(-)
create mode 100644 drivers/phy/qualcomm/phy-qcom-hdmi-28hpm.c
diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
index f31b575a6832..36f78fd06b06 100644
--- a/drivers/phy/qualcomm/Kconfig
+++ b/drivers/phy/qualcomm/Kconfig
@@ -51,7 +51,7 @@ config PHY_QCOM_HDMI
select GENERIC_PHY
help
Enable this to support the Qualcomm HDMI PHY presend on 32-bit platforms:
- MSM8260, MSM8660, MSM8960, APQ8060 and APQ8064.
+ MSM8260, MSM8660, MSM8960, MSM8974, APQ8060, APQ8064, APQ8074 and APQ8084.
Note, this driver is not used on MSM899x platforms, which use
PHY_QCOM_QMP_HDMI instead.
diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile
index de9bbaf45c74..082020af7fc1 100644
--- a/drivers/phy/qualcomm/Makefile
+++ b/drivers/phy/qualcomm/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_PHY_QCOM_HDMI) += phy-qcom-hdmi.o
phy-qcom-hdmi-y := \
phy-qcom-hdmi-preqmp.o \
+ phy-qcom-hdmi-28hpm.o \
phy-qcom-hdmi-28lpm.o \
obj-$(CONFIG_PHY_QCOM_M31_USB) += phy-qcom-m31.o
diff --git a/drivers/phy/qualcomm/phy-qcom-hdmi-28hpm.c b/drivers/phy/qualcomm/phy-qcom-hdmi-28hpm.c
new file mode 100644
index 000000000000..d3bf67e743aa
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-hdmi-28hpm.c
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Red Hat
+ * Author: Rob Clark <robdclark at gmail.com>
+ * Copyright (c) 2023, Linaro Ltd.
+ */
+
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+
+#include "phy-qcom-hdmi-preqmp.h"
+#include "phy-qcom-uniphy.h"
+
+#define REG_HDMI_8x74_ANA_CFG0 0x00000000
+#define REG_HDMI_8x74_ANA_CFG1 0x00000004
+#define REG_HDMI_8x74_ANA_CFG2 0x00000008
+#define REG_HDMI_8x74_ANA_CFG3 0x0000000c
+#define REG_HDMI_8x74_PD_CTRL0 0x00000010
+#define REG_HDMI_8x74_PD_CTRL1 0x00000014
+#define REG_HDMI_8x74_GLB_CFG 0x00000018
+#define REG_HDMI_8x74_DCC_CFG0 0x0000001c
+#define REG_HDMI_8x74_DCC_CFG1 0x00000020
+#define REG_HDMI_8x74_TXCAL_CFG0 0x00000024
+#define REG_HDMI_8x74_TXCAL_CFG1 0x00000028
+#define REG_HDMI_8x74_TXCAL_CFG2 0x0000002c
+#define REG_HDMI_8x74_TXCAL_CFG3 0x00000030
+#define REG_HDMI_8x74_BIST_CFG0 0x00000034
+#define REG_HDMI_8x74_BIST_PATN0 0x0000003c
+#define REG_HDMI_8x74_BIST_PATN1 0x00000040
+#define REG_HDMI_8x74_BIST_PATN2 0x00000044
+#define REG_HDMI_8x74_BIST_PATN3 0x00000048
+#define REG_HDMI_8x74_STATUS 0x0000005c
+
+#define HDMI_8974_VCO_MAX_FREQ 1800000000UL
+#define HDMI_8974_VCO_MIN_FREQ 600000000UL
+
+#define HDMI_8974_COMMON_DIV 5
+
+static void qcom_uniphy_setup(void __iomem *base, unsigned int ref_freq,
+ bool sdm_mode,
+ bool ref_freq_mult_2,
+ bool dither,
+ unsigned int refclk_div,
+ unsigned int vco_freq)
+{
+ unsigned int int_ref_freq = ref_freq * (ref_freq_mult_2 ? 2 : 1);
+ unsigned int div_in_freq = vco_freq / refclk_div;
+ unsigned int dc_offset = div_in_freq / int_ref_freq - 1;
+ unsigned int sdm_freq_seed;
+ unsigned int val;
+ unsigned int remain = div_in_freq - (dc_offset + 1) * int_ref_freq;
+ sdm_freq_seed = mult_frac(remain, 0x10000, int_ref_freq);
+
+ val = (ref_freq_mult_2 ? BIT(0) : 0) |
+ ((refclk_div - 1) << 2);
+ writel(val, base + UNIPHY_PLL_REFCLK_CFG);
+
+ writel(sdm_mode ? 0 : 0x40 + dc_offset, base + UNIPHY_PLL_SDM_CFG0);
+
+ writel(dither ? 0x40 + dc_offset: 0, base + UNIPHY_PLL_SDM_CFG1);
+
+ writel(sdm_freq_seed & 0xff, base + UNIPHY_PLL_SDM_CFG2);
+
+ writel((sdm_freq_seed >> 8) & 0xff, base + UNIPHY_PLL_SDM_CFG3);
+
+ writel(sdm_freq_seed >> 16, base + UNIPHY_PLL_SDM_CFG4);
+
+ ref_freq = ref_freq * 5 / 1000;
+ writel(ref_freq & 0xff, base + UNIPHY_PLL_CAL_CFG8);
+
+ writel(ref_freq >> 8, base + UNIPHY_PLL_CAL_CFG9);
+
+ vco_freq /= 1000;
+ writel(vco_freq & 0xff, base + UNIPHY_PLL_CAL_CFG10);
+
+ writel(vco_freq >> 8, base + UNIPHY_PLL_CAL_CFG11);
+}
+
+static unsigned long qcom_uniphy_recalc(void __iomem *base, unsigned long parent_rate)
+{
+ unsigned long rate;
+ u32 refclk_cfg;
+ u32 dc_offset;
+ u64 fraq_n;
+ u32 val;
+
+ refclk_cfg = readl(base + UNIPHY_PLL_REFCLK_CFG);
+ if (refclk_cfg & BIT(0))
+ parent_rate *= 2;
+
+ val = readl(base + UNIPHY_PLL_SDM_CFG0);
+ if (val & 0x40) {
+ dc_offset = val & 0x3f;
+ fraq_n = 0;
+ } else {
+ dc_offset = readl(base + UNIPHY_PLL_SDM_CFG1) & 0x3f;
+ fraq_n = readl(base + UNIPHY_PLL_SDM_CFG2) |
+ (readl(base + UNIPHY_PLL_SDM_CFG3) << 8);
+ }
+
+ rate = (dc_offset + 1) * parent_rate;
+ rate += mult_frac(fraq_n, parent_rate, 0x10000);
+
+ rate *= (refclk_cfg >> 2) * 0x3 + 1;
+
+ return rate;
+}
+
+static const unsigned int qcom_hdmi_8974_divs[] = {1, 2, 4, 6};
+
+static unsigned long qcom_hdmi_8974_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct qcom_hdmi_preqmp_phy *hdmi_phy = hw_clk_to_phy(hw);
+ u32 div_idx = hdmi_pll_read(hdmi_phy, UNIPHY_PLL_POSTDIV1_CFG);
+ unsigned long rate = qcom_uniphy_recalc(hdmi_phy->pll_reg, parent_rate);
+
+ return rate / HDMI_8974_COMMON_DIV / qcom_hdmi_8974_divs[div_idx & 0x3];
+}
+
+static long qcom_hdmi_8974_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ return clamp(rate,
+ HDMI_8974_VCO_MIN_FREQ / HDMI_8974_COMMON_DIV / 6,
+ HDMI_8974_VCO_MAX_FREQ / HDMI_8974_COMMON_DIV / 1);
+}
+
+static const struct clk_ops qcom_hdmi_8974_pll_ops = {
+ .recalc_rate = qcom_hdmi_8974_pll_recalc_rate,
+ .round_rate = qcom_hdmi_8974_pll_round_rate,
+};
+
+static int qcom_hdmi_msm8974_phy_find_div(unsigned int pixclk)
+{
+ int i;
+ unsigned int min_freq = HDMI_8974_VCO_MIN_FREQ / HDMI_8974_COMMON_DIV / 1000;
+
+ if (pixclk > HDMI_8974_VCO_MAX_FREQ / HDMI_8974_COMMON_DIV / 1000)
+ return -E2BIG;
+
+ for (i = 0; i < ARRAY_SIZE(qcom_hdmi_8974_divs); i++) {
+ if (pixclk >= min_freq / qcom_hdmi_8974_divs[i])
+ return i;
+ }
+
+ return -EINVAL;
+}
+
+static int qcom_hdmi_msm8974_phy_pll_set_rate(struct qcom_hdmi_preqmp_phy *hdmi_phy)
+{
+ unsigned int pixclk = hdmi_phy->hdmi_opts.pixel_clk_rate;
+ unsigned long vco_rate;
+ unsigned int div;
+ int div_idx = 0;
+
+ div_idx = qcom_hdmi_msm8974_phy_find_div(pixclk);
+ if (WARN_ON(div_idx < 0))
+ return div_idx;
+
+ div = qcom_hdmi_8974_divs[div_idx];
+ vco_rate = pixclk * HDMI_8974_COMMON_DIV * div;
+
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_GLB_CFG, 0x81);
+
+ hdmi_pll_write(hdmi_phy, UNIPHY_PLL_GLB_CFG, 0x01);
+ hdmi_pll_write(hdmi_phy, UNIPHY_PLL_VCOLPF_CFG, 0x19);
+ hdmi_pll_write(hdmi_phy, UNIPHY_PLL_LPFR_CFG, 0x0e);
+ hdmi_pll_write(hdmi_phy, UNIPHY_PLL_LPFC1_CFG, 0x20);
+ hdmi_pll_write(hdmi_phy, UNIPHY_PLL_LPFC2_CFG, 0x0d);
+
+ qcom_uniphy_setup(hdmi_phy->pll_reg, 19200, true, true, true, 1, vco_rate);
+
+ hdmi_pll_write(hdmi_phy, UNIPHY_PLL_LKDET_CFG0, 0x10);
+ hdmi_pll_write(hdmi_phy, UNIPHY_PLL_LKDET_CFG1, 0x1a);
+ hdmi_pll_write(hdmi_phy, UNIPHY_PLL_LKDET_CFG2, 0x05);
+
+ hdmi_pll_write(hdmi_phy, UNIPHY_PLL_POSTDIV1_CFG, div_idx);
+
+ hdmi_pll_write(hdmi_phy, UNIPHY_PLL_POSTDIV2_CFG, 0x00);
+ hdmi_pll_write(hdmi_phy, UNIPHY_PLL_POSTDIV3_CFG, 0x00);
+ hdmi_pll_write(hdmi_phy, UNIPHY_PLL_CAL_CFG2, 0x01);
+
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_PD_CTRL0, 0x1f);
+ udelay(50);
+
+ hdmi_pll_write(hdmi_phy, UNIPHY_PLL_GLB_CFG, 0x0f);
+
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_PD_CTRL1, 0x00);
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_ANA_CFG2, 0x10);
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_ANA_CFG0, 0xdb);
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_ANA_CFG1, 0x43);
+ if (pixclk == 297000) {
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_ANA_CFG2, 0x06);
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_ANA_CFG3, 0x03);
+ } else if (pixclk == 268500) {
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_ANA_CFG2, 0x05);
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_ANA_CFG3, 0x00);
+ } else {
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_ANA_CFG2, 0x02);
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_ANA_CFG3, 0x00);
+ }
+
+ hdmi_pll_write(hdmi_phy, UNIPHY_PLL_VREG_CFG, 0x04);
+
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_DCC_CFG0, 0xd0);
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_DCC_CFG1, 0x1a);
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_TXCAL_CFG0, 0x00);
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_TXCAL_CFG1, 0x00);
+ if (pixclk == 268500) {
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_TXCAL_CFG2, 0x11);
+ } else {
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_TXCAL_CFG2, 0x02);
+ }
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_TXCAL_CFG3, 0x05);
+ udelay(200);
+
+ return 0;
+}
+
+static int qcom_hdmi_msm8974_phy_pll_enable(struct qcom_hdmi_preqmp_phy *hdmi_phy)
+{
+ int ret;
+ unsigned long status;
+
+ /* Global enable */
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_GLB_CFG, 0x81);
+
+ /* Power up power gen */
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_PD_CTRL0, 0x00);
+ udelay(350);
+
+ /* PLL power up */
+ hdmi_pll_write(hdmi_phy, UNIPHY_PLL_GLB_CFG, 0x01);
+ udelay(5);
+
+ /* Power up PLL LDO */
+ hdmi_pll_write(hdmi_phy, UNIPHY_PLL_GLB_CFG, 0x03);
+ udelay(350);
+
+ /* PLL power up */
+ hdmi_pll_write(hdmi_phy, UNIPHY_PLL_GLB_CFG, 0x0f);
+ udelay(350);
+
+ /* Poll for PLL ready status */
+ ret = readl_poll_timeout(hdmi_phy->pll_reg + UNIPHY_PLL_STATUS,
+ status, status & BIT(0),
+ 100, 2000);
+ if (ret) {
+ dev_warn(hdmi_phy->dev, "HDMI PLL not ready\n");
+ goto err;
+ }
+
+ udelay(350);
+
+ /* Poll for PHY ready status */
+ ret = readl_poll_timeout(hdmi_phy->phy_reg + REG_HDMI_8x74_STATUS,
+ status, status & BIT(0),
+ 100, 2000);
+ if (ret) {
+ dev_warn(hdmi_phy->dev, "HDMI PHY not ready\n");
+ goto err;
+ }
+
+ return 0;
+
+err:
+ hdmi_pll_write(hdmi_phy, UNIPHY_PLL_GLB_CFG, 0);
+ udelay(5);
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_GLB_CFG, 0);
+
+ return ret;
+}
+
+static int qcom_hdmi_msm8974_phy_power_on(struct qcom_hdmi_preqmp_phy *hdmi_phy)
+{
+ int ret;
+
+ ret = qcom_hdmi_msm8974_phy_pll_set_rate(hdmi_phy);
+ if (ret)
+ return ret;
+
+ ret = qcom_hdmi_msm8974_phy_pll_enable(hdmi_phy);
+ if (ret)
+ return ret;
+
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_ANA_CFG0, 0x1b);
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_ANA_CFG1, 0xf2);
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_BIST_CFG0, 0x0);
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_BIST_PATN0, 0x0);
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_BIST_PATN1, 0x0);
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_BIST_PATN2, 0x0);
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_BIST_PATN3, 0x0);
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_PD_CTRL1, 0x20);
+
+ return 0;
+}
+
+static int qcom_hdmi_msm8974_phy_power_off(struct qcom_hdmi_preqmp_phy *hdmi_phy)
+{
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_PD_CTRL0, 0x7f);
+
+ hdmi_pll_write(hdmi_phy, UNIPHY_PLL_GLB_CFG, 0);
+ udelay(5);
+ hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_GLB_CFG, 0);
+
+ return 0;
+}
+
+const struct clk_parent_data msm8974_hdmi_pll_parent = {
+ .fw_name = "xo", .name = "xo_board",
+};
+
+const struct qcom_hdmi_preqmp_cfg msm8974_hdmi_phy_cfg = {
+ .clk_names = { "iface", "alt_iface" },
+ .num_clks = 2,
+
+ .reg_names = { "vddio", "core-vdda" },
+ .reg_init_load = { 100000, 10000 },
+ .num_regs = 2,
+
+ .power_on = qcom_hdmi_msm8974_phy_power_on,
+ .power_off = qcom_hdmi_msm8974_phy_power_off,
+
+ .pll_ops = &qcom_hdmi_8974_pll_ops,
+ .pll_parent = &msm8974_hdmi_pll_parent,
+};
diff --git a/drivers/phy/qualcomm/phy-qcom-hdmi-preqmp.c b/drivers/phy/qualcomm/phy-qcom-hdmi-preqmp.c
index 6885f587d7b4..e181a45df2dc 100644
--- a/drivers/phy/qualcomm/phy-qcom-hdmi-preqmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-hdmi-preqmp.c
@@ -181,6 +181,7 @@ static int qcom_hdmi_preqmp_probe(struct platform_device *pdev)
static const struct of_device_id qcom_hdmi_preqmp_of_match_table[] = {
{ .compatible = "qcom,hdmi-phy-8960", .data = &msm8960_hdmi_phy_cfg, },
+ { .compatible = "qcom,hdmi-phy-8974", .data = &msm8974_hdmi_phy_cfg, },
{ },
};
MODULE_DEVICE_TABLE(of, qcom_hdmi_preqmp_of_match_table);
diff --git a/drivers/phy/qualcomm/phy-qcom-hdmi-preqmp.h b/drivers/phy/qualcomm/phy-qcom-hdmi-preqmp.h
index dca9be78d8fc..bc81d68463ec 100644
--- a/drivers/phy/qualcomm/phy-qcom-hdmi-preqmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-hdmi-preqmp.h
@@ -75,5 +75,6 @@ static inline u32 hdmi_pll_read(struct qcom_hdmi_preqmp_phy *phy, int offset)
}
extern const struct qcom_hdmi_preqmp_cfg msm8960_hdmi_phy_cfg;
+extern const struct qcom_hdmi_preqmp_cfg msm8974_hdmi_phy_cfg;
#endif
--
2.39.2
More information about the linux-phy
mailing list