[PATCH 3/4] phy: qcom-qmp-usb: move PCS v6 register to the proper header
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Wed Sep 6 00:58:22 PDT 2023
The commit 39bbf82d8c2b ("phy: qcom-qmp: pcs-usb: Add v6 register
offsets") incorrectly added plain PCS registers to the PCS_USB header.
Move them to a proper location.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h | 15 ---------------
drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h | 15 +++++++++++++--
2 files changed, 13 insertions(+), 17 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h
index 4fbef4eea7b5..7c16af0b1cc3 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h
@@ -7,21 +7,6 @@
#define QCOM_PHY_QMP_PCS_USB_V6_H_
/* Only for QMP V6 PHY - USB3 have different offsets than V5 */
-#define QPHY_V6_PCS_LOCK_DETECT_CONFIG1 0xc4
-#define QPHY_V6_PCS_LOCK_DETECT_CONFIG2 0xc8
-#define QPHY_V6_PCS_LOCK_DETECT_CONFIG3 0xcc
-#define QPHY_V6_PCS_LOCK_DETECT_CONFIG6 0xd8
-#define QPHY_V6_PCS_REFGEN_REQ_CONFIG1 0xdc
-#define QPHY_V6_PCS_RX_SIGDET_LVL 0x188
-#define QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_L 0x190
-#define QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_H 0x194
-#define QPHY_V6_PCS_CDR_RESET_TIME 0x1b0
-#define QPHY_V6_PCS_ALIGN_DETECT_CONFIG1 0x1c0
-#define QPHY_V6_PCS_ALIGN_DETECT_CONFIG2 0x1c4
-#define QPHY_V6_PCS_PCS_TX_RX_CONFIG 0x1d0
-#define QPHY_V6_PCS_EQ_CONFIG1 0x1dc
-#define QPHY_V6_PCS_EQ_CONFIG5 0x1ec
-
#define QPHY_V6_PCS_USB3_POWER_STATE_CONFIG1 0x00
#define QPHY_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL 0x18
#define QPHY_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2 0x3c
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
index 18c4a3abe590..c95d3fabd108 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
@@ -7,10 +7,21 @@
#define QCOM_PHY_QMP_PCS_V6_H_
/* Only for QMP V6 PHY - USB/PCIe PCS registers */
-#define QPHY_V6_PCS_REFGEN_REQ_CONFIG1 0xdc
+#define QPHY_V6_PCS_LOCK_DETECT_CONFIG1 0x0c4
+#define QPHY_V6_PCS_LOCK_DETECT_CONFIG2 0x0c8
+#define QPHY_V6_PCS_LOCK_DETECT_CONFIG3 0x0cc
+#define QPHY_V6_PCS_LOCK_DETECT_CONFIG6 0x0d8
+#define QPHY_V6_PCS_REFGEN_REQ_CONFIG1 0x0dc
#define QPHY_V6_PCS_RX_SIGDET_LVL 0x188
+#define QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_L 0x190
+#define QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_H 0x194
#define QPHY_V6_PCS_RATE_SLEW_CNTRL1 0x198
-#define QPHY_V6_PCS_EQ_CONFIG2 0x1e0
+#define QPHY_V6_PCS_CDR_RESET_TIME 0x1b0
+#define QPHY_V6_PCS_ALIGN_DETECT_CONFIG1 0x1c0
+#define QPHY_V6_PCS_ALIGN_DETECT_CONFIG2 0x1c4
#define QPHY_V6_PCS_PCS_TX_RX_CONFIG 0x1d0
+#define QPHY_V6_PCS_EQ_CONFIG1 0x1dc
+#define QPHY_V6_PCS_EQ_CONFIG2 0x1e0
+#define QPHY_V6_PCS_EQ_CONFIG5 0x1ec
#endif
--
2.39.2
More information about the linux-phy
mailing list