[PATCH 6/8] arm64: dts: qcom: ipq5332: Add Super-Speed UNIPHY in USB node

[Dmitry Baryshkov]

On 29/09/2023 11:42, Praveenkumar I wrote:
> Add UNIPHY node in USB to support Super-speed. As the SS PHY has
> pipe clock, removed "qcom,select-utmi-as-pipe-clk" flag.
> 
> Signed-off-by: Praveenkumar I <quic_ipkumar at quicinc.com>
> ---
>   arch/arm64/boot/dts/qcom/ipq5332.dtsi | 6 ++----
>   1 file changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> index 1813b9fa4bb5..8fe4e45bfc18 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> @@ -349,8 +349,6 @@ usb: usb at 8af8800 {
>   
>   			resets = <&gcc GCC_USB_BCR>;
>   
> -			qcom,select-utmi-as-pipe-clk;
> -
>   			#address-cells = <1>;
>   			#size-cells = <1>;
>   			ranges;
> @@ -363,8 +361,8 @@ usb_dwc: usb at 8a00000 {
>   				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
>   				clock-names = "ref";
>   				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
> -				phy-names = "usb2-phy";
> -				phys = <&usbphy0>;
> +				phy-names = "usb2-phy", "usb3-phy";
> +				phys = <&usbphy0>, <&usbphy1>;

Ah, I see now. Maybe usbphy_ss_0 or something like that would be a 
better label for this PHY. I'd expect usbphy1 to be used for other host 
than usbphy0.

>   				tx-fifo-resize;
>   				snps,is-utmi-l1-suspend;
>   				snps,hird-threshold = /bits/ 8 <0x0>;

-- 
With best wishes
Dmitry