[PATCH V3 2/2] phy: qcom-qmp-ufs: Add Phy Configuration support for SC7280

[Dmitry Baryshkov]

On 23/08/2023 12:17, Nitin Rawat wrote:
> Add SC7280 specific register layout and table configs.
> 
> Co-developed-by: Manish Pandey <quic_mapa at quicinc.com>
> Signed-off-by: Manish Pandey <quic_mapa at quicinc.com>
> Signed-off-by: Nitin Rawat <quic_nitirawa at quicinc.com>
> ---
>   drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 142 ++++++++++++++++++++++++
>   1 file changed, 142 insertions(+)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> index 3927eba8e468..514fa14df634 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c

[skipped tables programming]

4),
> @@ -888,6 +993,40 @@ static const struct qmp_phy_cfg sa8775p_ufsphy_cfg = {
>   	.regs			= ufsphy_v5_regs_layout,
>   };
> 
> +static const struct qmp_phy_cfg sc7280_ufsphy_cfg = {
> +	.lanes                  = 2,
> +
> +	.offsets                = &qmp_ufs_offsets,
> +
> +	.tbls = {
> +		.serdes         = sm8150_ufsphy_serdes,
> +		.serdes_num     = ARRAY_SIZE(sm8150_ufsphy_serdes),
> +		.tx             = sc7280_ufsphy_tx,
> +		.tx_num         = ARRAY_SIZE(sc7280_ufsphy_tx),
> +		.rx             = sc7280_ufsphy_rx,
> +		.rx_num         = ARRAY_SIZE(sc7280_ufsphy_rx),
> +		.pcs            = sc7280_ufsphy_pcs,
> +		.pcs_num        = ARRAY_SIZE(sc7280_ufsphy_pcs),
> +	},
> +	.tbls_hs_b = {
> +		.serdes         = sm8150_ufsphy_hs_b_serdes,
> +		.serdes_num     = ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes),
> +	},
> +	.tbls_hs_g4 = {
> +		.tx             = sm8250_ufsphy_hs_g4_tx,
> +		.tx_num         = ARRAY_SIZE(sm8250_ufsphy_hs_g4_tx),
> +		.rx             = sc7280_ufsphy_hs_g4_rx,
> +		.rx_num         = ARRAY_SIZE(sc7280_ufsphy_hs_g4_rx),
> +		.pcs            = sm8150_ufsphy_hs_g4_pcs,
> +		.pcs_num        = ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs),
> +	},
> +	.clk_list               = sm8450_ufs_phy_clk_l,
> +	.num_clks               = ARRAY_SIZE(sm8450_ufs_phy_clk_l),

This doesn't correspond to the bindings. This array has 3 enries, while 
in the bindings you have opted for two clocks for this PHY.

> +	.vreg_list              = qmp_phy_vreg_l,
> +	.num_vregs              = ARRAY_SIZE(qmp_phy_vreg_l),
> +	.regs                   = ufsphy_v4_regs_layout,
> +};
> +
>   static const struct qmp_phy_cfg sc8280xp_ufsphy_cfg = {
>   	.lanes			= 2,
> 
> @@ -1648,6 +1787,9 @@ static const struct of_device_id qmp_ufs_of_match_table[] = {
>   	}, {
>   		.compatible = "qcom,sa8775p-qmp-ufs-phy",
>   		.data = &sa8775p_ufsphy_cfg,
> +	}, {
> +		.compatible = "qcom,sc7280-qmp-ufs-phy",
> +		.data = &sc7280_ufsphy_cfg,
>   	}, {
>   		.compatible = "qcom,sc8180x-qmp-ufs-phy",
>   		.data = &sm8150_ufsphy_cfg,
> --
> 2.17.1
> 

-- 
With best wishes
Dmitry